To
reduce
the
riskoffire or electric shock,donot
expose this
apparatus
to
rain or moisture.
Do notinstall the appliance
in
a confinedspace, suchasa bookcaseorbuilt-in cabinet.
To
reduce the risk of fireorelectric shock,donot place objects filled with liquids, such
as vases, on the apparatus.
Connect the
AC
power adaptor to an easily accessibleACoutlet. Should you notice an
abnormality
in
theACpower adaptor, disconnect it from theACoutlet immediately.
The following
FCC
statement applies only to the version of this
mcxlel
manufactured
for sale
in
the
USA.
Other versions may not comply with
FCC
technical regulations.
This device complies with
Part15of
the
FCC
Rules.
Operationissubjecttothe following
two conditions:
(1)
this device may not cause harmful interference, and
(2)
this device must
accept any interference received, including interference that
may
cause undesired operation.
You
are cautioned that any changes or modifications not expressly approved in this
manual could void your authority to operate this equipment.
Disposal
of
Old Electrical & Electronic Equipment (Applicableinthe
European
Union and
other
European countries with
separate
collection systems)
)t
This
symbolonthe
productoron
its
packaging
indicates
that
this
product
shall
notbetreatedashousehold
waste.
Insteaditshallbehanded
overtothe
applicable
collection
point
for
the
recyclingofelectrical
and
electronic
equipment.
By
ensuring
this
productisdisposedofcorrectly,
you
will
help
prevent
potential
negative
consequences
for
the
environment
and
human
health,
which
could
_
~~;n~07~:::I:~~at!I~Ot~:~~s;~~~:~lli~~=.p;~~~~~tailed
information
about
recyclingofthis
product,
please
contact
your
local
Civic
Office,
your
household
waste
disposal
serviceorthe
shop
where
you
purchased
the
product.
Notice for
the
customer in
the
countries applyingEUDirectives
The manufacturer of this product
is
Sony Corporation,
1-7-1
Kanan, Minato-ku, Tokyo,
Japan. The Authorized Representative
for
EMC
and product safetyisSony Deutschland
GmbH, Hedelfinger Strasse
61,
70327 Stuttgart, Germany.
For
any service or guarantee
matters please refer to the addresses giveninseparateservice orguarantee documents.
For customers
in
the
USA
Use
"LIMITED
WARRANTY"
card warranted by Sony Electronics
Inc.
For customers in Canada
Use
"Consumer 1Year Warranty" card warranted by Sony of Canada Ltd.
Note
on
installation
If
you
use
the
unitina
place
subjecttostaticorelectromagnetic
energy,
a track's transferred
data
maybecorrupted.
This
may
prevent
successful
transferring authorizationonyour
computer.
•
Notesonuse
•
Do
not
subject
the
unit
to:
-
Extreme
heatorcold
-
Dust,
dirt,orsand
-
High
humidity
-
Vibration
- Strong magnetic fields - Mechanical shock
- Direct sunlight (for extended periods)
•
Do
not set the unit on an tlIt5table surfaceasit
may fall, causing injuryordamage.
Do
not
drop
the
unit.
Unplug
theACadapter
from
theACoutletifthe
unit is
not
to
be used
for
an
extended period.
DiSCOIUlect
the
power
cordbythe
plug,
never
the cord itself.
Be
sure
that
nothing
metallic
comes
into
contact
with
the
metal
parts
of
this
unitasa
short
circult
may
occur
and
the
unit
maybedamaged.
•
Do
not operate the unit if it has a damaged cord, or
ifithas been dropped or damaged.
•
Always
keep
the
metal
contacts
clean.
Do
not
disassembleormodify
the
unit.
While
the
unitisin
use,itgets
wann.
Thisisnonnal.
•
Keep
the
unit
away
fromTVorAMreceivers,asit
may
disturb
reception.
Cleaning
Clean
the
unit
withasoft,
dry
cloth,ora
soft
cloth
lightly
moistened
with
a
mild
detergent
solution.Donot
use
any
typeofsolvent,
suchasalcohol
or
benzine,
which
may
damage
the
finish.
•
Preparation
Checking
the
~plied
accessories
• Cradle
(1)
(m)
•DCcharging cord (1)
(61)
•ACadaptor (r!J)
•ACpower
cord
Checking
other
components
•
Walkman
For
details
about
series
Walkman
units
supportedbythe
cradle,
visit:
USA:
http://www.sony.com/walkmansupport/
Canada: http://www.sony.ca/ElectronicsSupport/
Europe: http://support.sony-europe.com/DNA
Latin
America:
http://www.sony-Iatin.com/index.crp
China: http://service.sony.com.cn/KB/
Korea: http://scs.sony.co.kr/walkman/
Other
Asia
pan
pacific
area:
http://www.sony-asia.com/support/
•
Attachment
foraWalkman
..
•
USB
cable'
(I!J)
..
The
USB
cable is required to connect the cradle to
your
computer.
The
USB
cableissupplied
with
the
Walkman.
Installing
the
attachment
When
you
use
the
cradle,
fit
the
attachment
supplied
with
your
Walkman.
To
install
the
attachment,
fit
the
two
tabs
near
the
logo
into
the
holesonthe
cradle
first,
then
push
the
opposite
side
down
into
the
cradle.
To
remove
the
attachment,
push
strongly
the
concave
partofattachment
toward
the
rearofthe
cradleJ!),
then
push
strongly
the
area
indicatedbythe
mark (000) from above
0.
(lEI)
Note
The
shape
of the attachment
maybedifferent,
dependingonyour
Walkman model.
I
Parts
and
controls
RefertolIIustration
a.
mWM-PORT""
connector
for
Walkman:ToconnectaWalkmantothe
cradle.
[gJ
AUDIO OUT
jack:
Outputs a line-level signaltoa device such as an
active
speaker,
usinganoptional
audio
cable.
lID
AUDIOINjack:
Accepts
a line-level
signal
from a
music
player,
such
as
aCDplayer,
usinganoptional
audio
cable.
~
LEVEL
switch: Sets the recording level.
LEVELll ](recording with the normal volume level):Torecord from the line out
jack or headphone jack of a device such
as
a portable music player.
LEVELI2J(recording with the volume lowered): To record from the line out jack
ofa device that has a high
sound
output level, such as a component audio system.
(Using
LEVELl1]inthis case may resultindistortion of the audio signal.)
[ID
WM-PORT
jack
for a
computer:Toconnect
the
cradletoyour
computer
using the
USB
cable (supplied with the Walkman).
Note
If
a device
other
thanacomputeristobeconnected, refer to the
operating
instructions
supplied
with
the
device.
[§]
DCINjack:Toconnect the cradletotheACadaptor (supplied) using the
OC
charging
cordtocharge
the
Walkman.
WM·PORTisa dedicated multiple connector
for
connecting accessories10your
Walkman.
•
ChargingaWalkman
Refer
to lIIustration Ill.
1
Connect
the
smaller
terminal
(1Il)
of
theDCcharging
cord
(supplied)totheDCIN
jack
(lID)
of
the
cradle.
2
Connect
the
larger
terminal
(lID)
of
theDCcharging
cord
to
theACadaptor
(supplied).
3
Connect
theACpower
cord
(supplied)totheACadaptor
(1J1j).
4
Connect
theACpower
cordtothe
wall
outlet
([j]).
5
Attach
the
Walkmantothe
WM-PORT
connectoronthe
top
of
the
cradle
(~).
Charging
starts.
Charging
time
will
vary,
depending on
the
modelofthe
Walkman.
For
details,
refertothe
Operation
Guideofthe
Walkman.
Notes
• Place the
Walkman
firmly into the cradle.
•
Do
not
connect
anything
to the AUDIO
our
jackofthe
cradleifyou
listen to
songs
using the
headphonesofthe
Walkman
while charging. Otherwise,
no
soundisoutput
from the
headphone
jackofthe Walkman.
I
Connectingtoa
computer
RefertoIllustration
II.
1
Connect
the
WM-PORTofthe
USB
cable
(supplied
with
the
Walkman)tothe
WM-PORTonthe
backofthe
cradle
(1111).
2
Connect
the
other
endofthe
USB
cabletoyour
computer
(MI).
3
Attach
the
Walkmantothe
cradle
(IHI).
Notes
Place the
Walkman
firmly
into the cradle.
Ifthe cradle
is
connected to a
wall
outlet,
the
Wa1kman
willbecharged
from
the
wall
outlet.
Even if the cradle
is not connected to a wall outlet, the Walkman can
be
charged via
the
USB
cable.Ifthe cradleisconnected to a laptop computer which is not connected
to a wall outlet, the Walkman
will
deplete the battery of the laptop computer.
A
Walkman
will
not
be recognizedbya
computerifthe
cradle is connected
to
the
computerbytheIXcharging cord.
If
the Walkman is disconnected from the cradle while data is being transferred
from the computer, attach the Walkman to the cradle and transfer the data again.
Do
not
disconnect the
USB
cable, DC
charging
cord
andACpower
cord while
transferring
data
from the computer;
otherwise
the
data
transfer will
be
interrupted.Ifthis occurs, detach the
Walkman
from the cradle,
and
transfer
the
data
after attaching the Walkman to the cradle again.
•
Recordingtoa
Walkman
RefertoIllustration Ill.
By
connectingamusic
player,
suchasaCDplayer,tothe
AUDIOINjackofthe
cradle
by an optional audio cable
(~),
you can record to the Walkman* attached to the cradle.
..
Models
that
have a WM-PORT
and
recording functions only
1
Connect
the
music
playertothe
AUDIOINjackofthe
cradle
withasuitable
audio
cable
(sold
separately).
2
Attach
the
Walkmantothe
cradle.
The
recording
procedure
will
vary
dependingonthe
modelofthe
Walkman.
For
details,
see
the
Operation
Guideofthe
Walkman.
VHint
:~~~,I~:~:
~~:Lhttps://manualmachine.com/~~~r~~c~~~n~~.~~~;:a~~
S:~~~~I~~~
LEVEL switch. For
Notes
• If
the
audio
cableisconnectedtothe
AUOIO
OUT
jack,
sound during
recordingisoutput
fromanaudiooutput
device,
suchasan
active
speaker.
Ifnothing
is
connectedtothe
AUDIO
OUT
jack,
sound during
recording
is output
from
the
headphone
jackofthe
Walkrnan.
For
customers
in Europe:
If
you
recordtothe
NW-S700F I S600 series
Walkman
model using the cradle
to
monitor
sound
during
recording from the
headphone
jackofthe Walkman,
disconnect the DC charging cord from the
IXINjackofthe cradle beforehand.
•
Connecting
to a
device
suchasa
speaker
Refer to Illustration Ill.
Usinganoptional
audio
cable
(11§1),
you
can
connect
the
cradletoa
device
that
outputs
audio,
suchasan
active
speaker.Besuretotum
off
all
devices
before
connecting
them.
1
Connect
the
devicetothe
AUDIO OUT
jackofthe
cradle
with
a
suitable
audio
cable
(sold
separately).
2
Attach
the
Walkmantothe
cradle.
3
Start
playbackofthe
Walkman.
Notes
Connect
the
audio
cable before
starting
playbackonor
recording to the
Walkman.
If
you
connect it after starting playback,
sound
may
notbeoutput
from
the
AUDIO
OUT
jack.Ifthis occurs, detach
the
Walkman
from the
cradle,
and
start
playback after attaching the
Walkman
to the cradle again.
While
the cradleisconnectedtothe
computer, sound
may
notbeoutput
from
the
AUDIO
OUT
jackofthe
cradle.Ifthis
occurs,
disconnect the
USB
cable
from
the
computer.
Sound from the computer
is
not
output
from the AUDTOOUT jack of the cradle.
While the
cradle
is connected toanaudio
output
device,nosoundisoutput
from the
headphone
jack of the Walkman.
If
the recording levelofaudio data played backonthe Walkmanistoo high, the
output
sound
quality from the Walkrnan via the cradle to a device, such as an
active speaker, may not meet the user customized settings, e.g., "Equalizer"
etc.
If
you
useaWalkman
with a built-in FM tuner,
you
may
not be able to
hear
theFMbroadcast,orreception
may
be lowered substantially.
•
Specifications
Terminals
WM-PORT
connector
(22
pin) (For Walkman)
WM-PORT
jack
(22
pin) (For a computer)
AUDIO
OUT
(Stereo mini, 10kQ)
AUDIO
IN
(Stereo mini),DCfN
5V
Switch
settings
LEVEL
1/2
AC
adaptor
DC
5V
"WALKMA
"and
"WALKMAN" logo are registered trademarks of Sony Corporation.