Sony WAHT-SA10 Operating Manual

SON~

Wireless

3-879-620-11(1)

Surround

.'

Kit

Operating

. .

Manual de instrucciones

Instructions~

__

WAHT-SA10

s-masrer

Digital

©2008

Amplifier

Sony Corporation

•••

• •

S-AIR

DIGITAL

WIRELESS

Table

of

Contents

About This Operating Instructions 4
Overview 4
Unpacking 5
Hooking Up 6
Connecting the AC Power Cords

(Mains Leads) 8

Setting up the Wireless System 8
Troubleshooting
Specifications
Index to Parts

12
13
15

WARNING

To reduce the riskoffireorelectric
shock,
to

Do not install the appliance in a confined space,
such

To
objects filled with liquids, such as vases, on the
apparatus.

do

not

expose

rain

or

moisture.

as

a bookcase orbuilt-in cabinet.

prevent fire or shock hazard, do not place

this

apparatus

CAUTION: TO REDUCE

DO

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PEASONNEL.

This symbol is intended to alert the user

~

I to the presence

&

sufficient magnitude to constitute a riskofelectric

shock to persons.

Lt.

accompanying the appliance.

"dangerous voltage" within the
product's enclosure that may be

This symbol is intended to alertthe user
to the presence
and maintenance (servicing)
instructions in the literature

Owner's

The model and serial numbers are located on the

side exterior
in

the space provided below. Refer to them
whenever you call upon your Sony dealer
regarding this product.

Model No. WAHT-SAlO
Serial

No.,

THE

RISK OF

elECTRIC

SHOCK.

NOT REMOVE COVER (OR BACK).

of

uninsulated

of

important operating

Record

of

the unit. Record the serial number

_

of

In door use only.

For

wireless

transceiver

(EZW.

RT10)

This transceiver must not be co-located or
operated in conjunction with any other antenna

transmitter.
This equipment complies with FCC radiation
exposure limits set forth for uncontrolled
equipment and meets the
(RF) Exposure Guidelines in Supplement C to
OET65. This equipment should be installed and
operated with at least 20 cm and more between the
radiator and person's body (excluding extremities:
hands, wrists, feet and ankles).

FCC

radio frequency

or

Date

of

Manufacture Marking, Shock Hazard
Marking and Associated Graphical Symbols are
located on the bottom exterior.

The following FCC statement applies only to the
version
USA. Other versions may not comply with FCC
technical regulations.

of

this model manufactured for sale in the

WARNING

This equipment has been tested and found to
comply with the limits for a Class B digital device,

pursuant to Part
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses, and
can radiate radio frequency energy and,
installed and used in accordance with the
instructions, may cause harmful interference to
radio communications. However, there is no
guarantee that interference will not occur in a
particularinstallation.
harmful interference to radio or television

15ofthe FCC Rules. These limits

if

not

If

this equipment does cause

reception, which can be detennined by turning the
equipment
to correct the interference by one or more
following measures:

Reorientorrelocate the receiving antenna.

-

-

Increase
equipment

-

Connect
circuit
receiver

-

Consult
TV

off

and on, the userisencouraged to try

the separation

and receiver.

the

equipment

different

is connected.

the

technician for help.

from

dealeroran

between

intoanoutletona

that to

experienced

the

which

the

of

the

radio/

CAUTION

You are cautioned that any changes
modifications not expressly approvedinthis
manual could void your authority to operate this
equipment.

Important

1)

Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install
in accordance with the manufacturer's
instructions.

8) Do not install near any heat sources such
radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.

9) Do not defeat the safety purpose
polarized or grounding-type plug. A polarized
plug has two blades with one wider than the

other. A grounding type plug has two blades
and a third grounding prong. The wide blade
or

the third prong are provided for your safety.

If

the provided plug does not fit into your
outlet, consult an electrician for replacement
of

the obsolete outlet.

10) Protect the power cord from being walked on
or

pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.

11) Only use attachments/accessories specified by
the manufacturer.

Safety

Instructions

or

of

as

the

12) Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or sold

is

with the apparatus. When a cart
caution when moving the cart/apparatus
combination to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms
or when unused for long periods

14) Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way, such

as power-supply cord or plugisdamaged,
liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate
normally, or has been dropped.

used, use

of

time.

Precautions

On

power

Install this system so that the AC power cord
(mains lead) can be unplugged from the wall outlet
(mains) immediately in the event

On

placement

• Do not place the system in locations that are hot
and subject to direct sunlight, dusty, very humid,
or extremely cold.

• Use caution when placing the system on a
specially treated (waxed, oiled, polished, etc.)
floor, as staining or discoloration may result.

• Allow adequate air circulation to prevent
internal heat buildup.

• Do not place the system on surfaces (rugs,
blankets, etc.) or near materials (curtains,

draperies) that may block the ventilation slots.

• Do not install the system near heat sources such

as radiators or air ducts,
direct sunlight, excessive dust, mechanical
vibration or shock.

• Donot install the system in an inclined position.

It is designed to be operated in a horizontal
position only.

• Keep the system away from equipment with
strong magnets, such
large loudspeakers.

Do

not place heavy objects on the system.

•

•

If

you use more than one setofS-AIR products,

position them away from each other to avoid

cross talk.

• Install this surround amplifier and S-AIR

products at least 50 cm away from people.

sources

as

of

trouble.

orina place subject to

microwave ovens,

or

DIll

• To prevent fire or shock hazard, do not place
objects filled with liquids, such as vases, on the
apparatus.
Do

not place the system on carpet, as

•
discoloration may result.
If

you use more than one surround amplifier, do

•

of

not place one on top

On

cleaning

Clean the cabinets only with a soft dry cloth. Do
not use any type
or solvent such as alcohol or benzene.

of

the other.

abrasive pad, scouring powder

Safety

•

If

anything falls into the cabinet, unplug the unit
and have it checked by qualified personnel
before operating it any further.

• Unplug the unit from the wall outlet (mains)
you do not intend to use it for an extended period
of

time. To disconnect the cord, pull it out by the

plug, never by the cord.

This surround amplifier allows you

to

use a

5.1 channel system (five speakers and one

7.1

subwoofer) or

channel system (seven

speakers and one subwoofer).

Enjoying

a 5.1

channel

system

S-AIR can avoid cluttered cords to keep
your room tidy.

if

WAHT-SAlOisa surround amplifier for
Sony S-AIR products. The amplifier is for
models that have an "EZW-RTIO" or
"EZW

-T100" slot on their rear panel.

4

US

Enjoying a 7.1

system

channel

S-AIRmakes possible a 7.1 channel system,
using two surround and two surround back

speakers.

®Front left speaker

® Front right speaker

©Center speaker

@Surround left speaker

®Surround right speaker

®Surround back left speaker

@ Surround back right speaker

®Subwoofer

CD

Surround amplifier
(for surround speakers)

oSurround amplifier

(for surround back speakers)

Surround
TA·SA100WR

Speaker

Speaker

Wireless

Wireless transceiver (EZW-RTlO) (1)

amplifier

(1)

cord

cord

adapter

cover

holder(1)

(1)

Speaker

Operating

cords

(2)

Instructions

(1)

Hooking

Connect
S-AIR

Before

remove

(mains

products

the surround amplifier to your

main

Up

unit.

installing,

the

AC

power

leads)

from

of

wall

make

all

sure

cords

S·AIR

outlets

(mains).

Inserting

wireless

adapters

1 Insert the wireless transceiver

(supplied)inthe slot
of the surround amplifier.

on

the rear

om

• Insert the wireless transceiver (supplied)
with the S-AIR logo facing
make sure
transceiver (supplied) and the slot on the
surround amplifier are aligned when
inserting.

• Do not touch the terminal
adapter.

the'"

marks on the wireless

up.

Also,

of

the wireless

to

2 Insert the wireless adapter (not

supplied)inthe slot on the S-AIR
main unit.

If

a wireless adapter is not supplied
with your
purchase a wireless transmitter

TlOO.

For

details, refer to the operating

instructions

mmJ

• Insert the wireless adapter (not supplied)

with the S-AIR logo facing
make sure
adapter (not supplied) and the slot on the
S-AIR main unit are aligned when
inserting.

• Do not touch the terminal

adapter.

The
S-AIR
S-AIR
same.

Rear panel

S-AIR

the'"

illustrationofthe rear panelofan

main unit is an example.
main units look exactly the

main unit, you

of

the S-AIR main unit.

up.

marks on the wireless

of

the wireless

can

EZW-

Also,

Not

all

(not supplied)