Sony VPL-VW10HT Product Sheet

VPL-VW10HT

LCD VIDEO PROJECTOR

Sony is proud to introduce its new VPL-VW10HT LCD Video Projector – the stylish and brilliant projector
for various types of meetings and presentations. Featuring a powerful combination of newly developed
16:9 wide XGA (1366 x 768 pixels) LCD panels, a high-performance optical system and a 200 W UHP lamp,
this impressive unit provides extremely high-resolution and high-contrast images at a brightness of
1000 ANSI lumens.

What’s more, advanced Sony signal processing technologies such as Digital Reality Creation - Multi Function
(DRC-MFTM), 3D gamma, 3D/3-line Y/C separation/digital noise reduction and through mode, help to provide a
truly rewarding visual experience.Video memory,digital keystone correction, cinema black mode, short
throwing distance,low fan noise, and a handsome white cabinet – just some of the innovations that make
Sony’s VPL-VW10HT LCD Video Projector the perfect addition to your office environment.

TM

Superb picture quality

For crisp and vivid image reproduction,the VPL-VW10HT
incorporates a series of high-performance Sony signal processing
technologies such as Digital Reality Creation - Multi Function
(DRC-MF),3D gamma correction and 3D*/3-line Y/C separation/
digital noise reduction circuit. With the newly developed DRC-MF,
picture quality is enhanced in “4x dense DRC” mode or “DRC
progressive” mode depending on input source characteristics. 3D
gamma correction performs precise gamma level adjustment and
helps to improve white uniformity.

*This function is only applicable to NTSC signals.

PICTURE CONTROL

CONTRAST:
BRIGHT:
COLOR:
HUE:
SHARP:
D.PICTURE:
COLOR TEMP:
COLOR SYS:

DRC-MF:

OFF
LOW

DRCx4
DRC PROGRES.

VIDEO

On-screen menu

Cinema black mode

For extra versatility,the VPL-VW10HT allows you to set lamp drive
wattage to “normal” (1000 ANSI lumens) or “cinema black” mode
(approx.750 ANSI lumens). The “cinema black” mode provides an
elevated black level for viewing film sources. For optimum results,
use both modes according to ambient light conditions.

“Cinema black” mode ON

“Cinema black” mode OFF

Simulated picture

Video memory

The video memory function of the VPL-VW10HT memorizes six
sets of control parameters to match various input sources. Control
parameters include picture control,DRC-MF settings, aspect settings
and V scroll/title area adjustment.

DRC chip

1000 ANSI lumens

for exceptional brightness

With its newly developed LCD panels,high-performance optical
unit,and a 200 W UHP lamp,the VPL-VW10HT provides 1000
ANSI lumens (in 16:9 mode) of brightness for extremely clear
on-screen images.

Optical unit

Lamp

Newly designed

wide-aspect LCD panel

The VPL-VW10HT incorporates three wide XGA (1366 x 768
pixels) resolution LCD panels with a metal mask.
To improve uniformity and reduce “ghost” images
on the screen,dot line inverter technology is
adopted on these panels. The panel drive
voltage has also been increased for
outstanding black-level reproduction.

LCD panel

Through mode

In the “through” mode,video signals are not affected by scan
conversion and this enables the VPL-VW10HT to reproduce a
high-density, one-to-one mapped picture. The “full through” mode is
suitable for squeezed 16:9 sources,while the “normal through” mode
is ideal for 4:3 sources.

“Full” mode

“Normal” mode

“Zoom” mode

“Full through” mode

“Normal through” mode “Subtitle” mode

“Wide zoom” mode

RGB input

In addition to video signals,the VPL-VW10HT accepts RGB signals
(fH:15 to 91 kHz, fV: 50 to 85 Hz), while the RGB enhancer
circuit helps to produce crisper RGB images.

New RM-PJVW10
remote control unit

The new RM-PJVW10 remote control unit
allows you to easily select video memory and
inputs,while the LIGHT key provides smooth
control even in low-light conditions.

RM-PJVW10

395

(15 5/8)

168

(6

5

/

8

)

427

(16 7/8)

Control panel

Connectors

Dimensions

Unit: mm (inches)

Specifications

Model

Optical

Signals

General

Inputs/Outputs

Projection system
LCD panels

Projection lens
Lamp
Screen coverage
Light output
Color system

Resolution

Acceptable signals

Power requirements
Power consumption
Heat dissipation
Dimensions

Weight
Operating temperature
Operating humidity
Video

Composite
Y/C IN

Y
C

INPUT A/B

Component/Progressive
Component/YPBPR/
Analog RGB

G
G with sync/Y
B/CB/PB
R/CR/PR
SYNC/HD

Composite sync
Horizontal sync

VD

Vertical sync

CONTROL S IN

(PLUG IN POWER)

TRIGGER

REMOTE RS-232C

Safety regulations

Supplied accessories

*ANSI lumens is a measuring method of the American National Standards Institute IT 7.228.

VPL-VW10HT

3 LCD panels, 1 lens projection system

1.35-inch p-Si TFT LCD panel
3,147,264 (1,049,088 x 3) pixels

1.2 times zoom lens, F2.2 to 2.5, f44.6 to 53.6 mm
200 W UHP
40 to 300 inches (16:9, viewable area, measured diagonally)
1000 ANSI lumens* (16:9), 750 ANSI lumens (4:3)
NTSC, PAL, SECAM, NTSC4.43, PAL-M, PAL-N
(automatically/manually selected)
Video: 750 TV lines
HD: 1100 TV lines
RGB: 1366 x 768 pixels
DTV (480i, 480p, 720p, 1080i), progressive component,
15 kHz component 50/60 Hz system,composite video,
Y/C video, RGB (fH: 15 to 91 kHz, fV: 50 to 85 Hz)
AC 100 to 240 V, 50/60 Hz
Max. 300 W, standby 6 W

1023.7 BTU
395 (W) x 168 (H) x 427 (D) mm
(15 5/8 x 6 5/8 x 16 7/8 inches)
Approx. 17 lb 10 oz (8 kg)
0 to 40 °C (32 to 104 °F)
35 to 85 %

Phono type, 1 Vp-p ± 2 dB sync negative, 75 Ω
Mini DIN 4-pin
1 Vp-p ± 2 dB sync negative, 75 Ω
Burst 0.286 Vp-p ± 2 dB (NTSC), 75 Ω or 0.3 Vp-p ± 2 dB (PAL), 75 Ω

Phono type

0.7 Vp-p ± 2 dB positive, 75 Ω
1 Vp-p ± 2 dB sync negative, 75 Ω

0.7 Vp-p ± 2 dB positive, 75 Ω

0.7 Vp-p ± 2 dB positive, 75 Ω

1 to 5 Vp-p, high impedance positive/negative
1 to 5 Vp-p, high impedance positive/negative

1 to 5 Vp-p, high impedance positive/negative
Stereo mini jack 5 Vp-p,
plug in power DC 5 V
Mini jack
Power on: DC 12 V, output impedance: 4.7 kΩ
Power off: 0 V
D-sub 9-pin (Female)
UL, cUL (CSA), FCC Class B, IC Class B, EN 60 950 (Nemko), CE,
C-Tick, VCCI class B, JEIDA
Remote control unit RM-PJVW10
Size AA battery (2)
Air filter
Operating manual

Optional accessories

Sony Electronics Inc.
One Sony Drive
Park Ridge, NY 07656
www.sony.com/displaysystems

V-2067

Projector lamp LMP-P200
(for replacement)

Monitor cable SMF-400

Projector suspension support
PSS-610

(HD D-sub 15-pin to 5 BNC)
Macintosh

(Macintosh to VGA)

®

adaptor ADP-20

©2001 Sony Electronics Inc. All rights reserved.

Reproduction in whole or in part without written permission is prohibited.

Features and specifications are subject to change without notice.

All non-metric weights and measures are approximate.

Sony, Digital Reality Creation and DRC-MF are trademarks of Sony.

Macintosh is a registered trademark of Apple Computer, Inc.

All other trademarks are the property of their respective owners.