Sony VAIO PCG-X505CP, VAIO VGN-X505ZP, VAIO VGN-505VP, VAIO VGN-505AP Service Manual
SERVICE MANUAL
Ver 6-2004H
Revision History
Area Model Lineup
1
4
[MA]
[MA]
Japanese Japanese PCG-X505CP
American US/Canadian VGN-X505ZP
European AEP/UK VGN-X505VP
Asian/Oceania/
South Africa
Chinese VGN-X505AP
PCG-X505CP
VGN-X505ZP
VGN-X505VP
VGN-X505AP
9-876-368-06
Confidential
Design and specifications are subject to
•
change without notice.
●
本機の仕様および外観は,改良のため予告なく
Illust : PCG-X505CP
変更することがありますが,ご了承ください。
NOTEBOOK COMPUTER
Information in this document is subject to change
without notice.
Sony, VAIO and CLIE are trademarks or
registered trademarks of Sony. Microsoft,
Windows, Windows Media, Outlook, Bookshelf
and other Microsoft products are trademarks or
registered trademarks of Microsoft Corporation
in the United State and other countries.
The word Bluetooth and the Bluetooth logo are
trademarks of
Bluetooth SIG, Inc. AMD, the
AMD logo, other AMD product names and
combinations thereof are trademarks of
Advanced Micro Devices, Inc. Intel Inside logo,
Pentium and Celeron are trademarks or registered
trademarks of Intel Corparation. Transmeta, the
Transmeta logo, Crusoe Processor, the Crusoe
logo and combinations thereof are trademarks of
Transmeta Corporation in the USA and other
countries. Graffiti, Hotsync, PalmModem, and
Palm OS are registered trademarks, and the
Hotsync logo and Palm are trademarks of Palm,
Inc. or its subsidiaries. (M) and Motrola are
trademarks of Motrola, Inc. Other Motrola
pruducts and services with (R) mark like
Dragomball are the trademarks of Motrola, Inc.
All other name of systems, products and services
in this manual are trademarks or registered
trademarks of their respective owners.
In this manual, the (TM) or (R) mark are not
specified.
Caution Markings for Lithium/Ion Battery - The
following or similar texts shall be provided on
battery pack of equipment or in both the
operating and the service instructions.
CAUTION: Danger of explosion if battery is
incorrectly replaced. Replace only with the same
or equivalent type recommended by the
manufacturer. Discard used batteries according
to the manufacturer’s instructions.
CAUTION: The battery pack used in this device
may present a fire or chemical burn hazard if
mistreated. Do not disassemble, heat above
100°C (212°F) or incinerate.
Dispose of used battery promptly.
Keep away from children.
CAUTION: Changing the back up battery.
• Overcharging, short circuiting, reverse
charging, multilation or incineration of the cells
must be avoided to prevent one or more of the
following occurrence; release of toxic materials,
release of hydrogen and/or oxygen gas, rise in
surface temperature.
• If a cell has leaked or vented, it should be
replaced immediately while avoiding to touch
it without any protection.
Service and Inspection Precautions
1. Obey precautionary markings and
instructions
Labels and stamps on the cabinet, chassis, and
components identify areas requiring special
precautions. Be sure to observe these precautions, as
well as all precautions listed in the operating manual
and other associated documents.
2. Use designated parts only
The set’s components possess important safety
characteristics, such as noncombustibility and the
ability to tolerate large voltages. Be sure that
replacement parts possess the same safety
characteristics as the originals. Also remember that
the ! mark, which appears in circuit diagrams and
parts lists, denotes components that have particularly
important safety functions; be extra sure to use only
the designated components.
3. Always follow the original design
when mounting parts and routing
wires
The original layout includes various safety features,
such as inclusion of insulating materials (tubes and
tape) and the mounting of parts above the printer
board. In addition, internal wiring has been routed and
clamped so as to keep it away from hot or high-voltage
parts. When mounting parts or routing wires, therefore,
be sure to duplicate the original layout.
4. Inspect after completing service
After servicing, inspect to make sure that all screws,
components, and wiring have been returned to their
original condition. Also check the area around the repair
location to ensure that repair work has caused no damage,
and confirm safety.
5. When replacing chip components...
Never reuse components. Also remember that the
negative side of tantalum capacitors is easily damaged
by heat.
6. When handling flexible print
boards...
• The temperature of the soldering-iron tip should be
about 270°C.
• Do not apply the tip more than three times to the same
pattern.
• Handle patterns with care; never apply force.
Caution: Remember that hard disk drives are easily
damaged by vibration. Always handle with care.
ATTETION AU COMPOSANT AYANT
LES COMPOSANTS IDENTIFÉS PAR UNE
MARQUE
SCHÉMATIQUES ET LA LISTE DES PIÈCES
SONT CRITIQUES POUR LA SÉCURITÉ DE
FONCTIONNEMENT. NE REMPLACER CES
COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉSDANS
CE MANUEL OU DANS LES SUPPÉMENTS
PUBLIÉS PAR SONY.
RAPPORT
À LA SÉCURITÉ!
!!
! SUR LES DIAGRAMMES
!!
– 2 –
Confidential
PCG-X505CP (J)
VGN-X505ZP (AM)
VGN-X505VP (EU)
VGN-X505AP (AO)
TABLE OF CONTENTS
Section Title Page
CHAPTER 1. SPECIFICATIONS ....................................................... 1-1
(to 1-1)
CHAPTER 2. BLOCK DIAGRAM...................................................... 2-1
(to 2-1)
CHAPTER 3. FRAME HARNESS DIAGRAM .............................. 3-1
(to 3-1)
CHAPTER 4. EXPLODED VIEWS AND PARTS LIST
Main Section
MS-1 .............................................................................................................. 4-2
LCD
L-1 ................................................................................................................. 4-3
Accessories
A-1 ................................................................................................................. 4-4
A-2 ................................................................................................................. 4-5
(to 4-5)
CHAPTER 5. OTHERS
5-1. The Barcode Label ..................................................................................... 5-1
(to 5-1)
5
[ADD]
History of the changes is shown as the
“Revision History” at the end of this data.
変更履歴は, ” Revision History ” として,
本データ末に記載してあります。
– 3 –
Confidential
PCG-X505CP (J)
VGN-X505ZP (AM)
VGN-X505VP (EU)
VGN-X505AP (AO)
CHAPTER 1.
SPECIFICATIONS
1-1. Specifications
J AM EU AO
PCG-X505CP VGN-X505ZP VGN-X505VP VGN-X505AP
CPU PM-1.1 ULV PM-1.1 ULV PM-1.1 ULV PM-1.1 ULV
ChipSet Intel 855GM Intel 855GM Intel 855GM Intel 855GM
Graphic Intel 855GM Intel 855GM Intel 855GM Intel 855GM
LCD 10.4"XGA 10.4"XGA 10.4"XGA 10.4"XGA
HDD 20GB 20GB 20GB 20GB
MEMORY 512MB Onboard 512MB Onboard 512MB Onboard 512MB Onboard
Internal W-LAN
✕
✕✕ ✕
AC adaptor PCGA-AC16V6 PCGA-AC16V6 PCGA-AC16V6 PCGA-AC16V6
Battery PCGA-BP505 PCGA-BP505 PCGA-BP505 PCGA-BP505
Accessory VGA/LAN Adaptor VGA/LAN Adaptor VGA/LAN Adaptor VGA/LAN Adaptor
- VGP-MCA10 VGP-MCA10 VGP-MCA10
- - PCGA-DDRW2 PCGA-DDRW2
- PCGA-C800S/B PCGA-C300S/B PCGA-C300S/B
OS XP Professional XP Professional XP Professional XP Professional
4
1
[MA]
• The trademarks or registered trademarks of above table, refer to page 2.
•
本表中の商標・登録商標については,２ページをご参照下さい。
1–1
(END)
[MA]
Confidential
PCG-X505CP (J)
VGN-X505ZP (AM)
VGN-X505VP (EU)
VGN-X505AP (AO)
5
[ADD]
PCGA-DDRW2
5.0V
DVD±RW Drive
SONY UJ-820
1-796-904-21
1394 Bridge
EPSON_SPC7281
3.3V
Detect
Detect
Disable
FFM_MD8408B
OVP CIRCUIT
DC/DC Converter
LINEAR_LTC1735
3.3V Regurator
RICOH_RN5RF33A
1394 PHY
IC202IC200
IC300
IC203
Q303
F300
DC-Jack Connector
Q310
Close
1394+POWER Connector
MOLEX_549490-0611
CHAPTER 2.
BLOCK DIAGRAM
DC Jack
(16V)
FPC-9
VGA
Close
Et her
CN300
CN203
FPC-8
mini VGA
(VGA & Ether)
USB2.0
(rear)
USB2.0
(front)
i.LINK
with
DC out
port0
port2
MBX-96
Battery
(power circuit)
EC/KBC
controller
H8S/2160
NEC
uPD789176
SMbus0
VGA (RGB)
100Base-Tx
Power
Check
10Base-T/
LPC
Debug
USB2.0
(33MHz)
PHY
Intel
82562EP
FWH
(8Mb)
i.LINK
EEPROM
(MAC address)
L
C
I
EEPROM
(password)
CPU
Intel
Pentium M
ULV1.1GHz
PSB
(400MHz)
GMCH
Intel
855GM
HUB Link
(66MHz)
ICH
Intel
ICH4-m
IDE
(Ultra ATA100)
ATF0
LM86
DDR
(266MHz)
PCI
(33MHz)
i.LINK
&
PC Card
RICOH
R5C551
SMbus1
LVDS
memory (512Mb x 8)
memorymemorymemorymemorymemorymemorymemorymemor
AC Link
PC Card I/F
EEPROM
(GUID)
LCD
TMDT
10.4 XGA
y
speaker
FPC-7
Audio-
Headphone
CODEC
ADI
AD1981B
PC Card
(typeII x 1)
VGN-X505VP, X505AP
iLINK Connector
CN202
I/F connectors
Stick Pointer
2–1
(END)
Internal KeyBoard
HDD
TOSHIBA
1.8/1pl
(20GB)
Confidential
PCG-X505CP (J)
VGN-X505ZP (AM)
VGN-X505VP (EU)
VGN-X505AP (AO)
Loading...