Sony Vaio VGC-LA50,Vaio VGC-LS1,Vaio VGC-LA50B,Vaio VGC-LA70B,Vaio VGC-LA90S Service Manual

SERVICE MANUAL

Sony Confidential

Ver.7-2006K

Revision History

VGC-LA50

VGC-LA50B

J

VGC-LA70B

VGC-LA90S *

VGC-LA50/LA50B/LA70B/LA90S

VGC-LS1

AM VGC-LS1

*:CTO Model

4 [MA]

Design and specifications are subject to change
without notice.

PERSONAL COMPUTER

9-876-471-07

Information in this document is subject to
change without notice.

Sony, VAIO and CLIE are trademarks or regis­tered trademarks of Sony. Microsoft, Windows,
Windows Media, Outlook, Bookshelf and other
Microsoft products are trademarks or registered
trademarks of Microsoft Corporation in the
United States and other countries. The word
Bluetooth and the Bluetooth logo are trademarks
of Bluetooth SIG, Inc. AMD, the AMD logo, other
AMD product names and combinations thereof
are trademarks of Advanced Micro Devices, Inc.
Intel Inside logo, Pentium, Celeron and Core are
trademarks or registered trademarks of Intel Cor­poration. Transmeta, the Transmeta logo, Crusoe
Processor, the Crusoe logo and combinations
thereof are trademarks of Transmeta Corporation
in the USA and other countries. Graffi ti, Hot­Sync, PalmModem, and Palm OS are registered
trademarks, and the Hotsync logo and Palm are
trademarks of Palm, Inc. or its subsidiaries. (M)
and Motrola are trademarks of Motrora, Inc. Other
Motrola products and services with (R) mark like
Dragomball are the trademarks of Motrola, Inc.

All other names of systems, products and services
in this manual are trademarks or registered trade­marks of their respective owners. In this manual,
the (TM) or (R) mark are not specifi ed.

Caution Markings for Lithium/Ion Battery - The
following or similar texts shall be provided on
battery pack of equipment or in both the operating
and the service instructions.

CAUTION: Danger of explosion if battery is
incorrectly replaced. Replace only with the same
or equivalent type recommended by the manu­facturer. Discard used batteries according to the
manufacturer’s instructions.

CAUTION: The battery pack used in this device
may present a fi re or chemical burn hazard if mis­treated. Do not disassemble, heat above 100°C
(212°F) or incinerate. Dispose of used battery
promptly. Keep away from children.

CAUTION: Changing the back up battery.

• Overcharging, short circuiting, reverse charg­ing, multilation or incineration of the cells must
be avoided to prevent one or more of the fol­lowing occurrences; release of toxic materials,
release of hydrogen and/or oxygen gas, rise in
surface temperature.

• If a cell has leaked or vented, it should be
replaced immediately while avoiding to touch
it without any protection.

Service and Inspection Precautions

1. Obey precautionary markings and
instructions

Labels and stamps on the cabinet, chassis, and
components identify areas requiring special pre­cautions. Be sure to observe these precautions,
as well as all precautions listed in the operating
manual and other associated documents.

2. Use designated parts only

The set’s components possess important safety
characteristics, such as noncombustibility and
the ability to tolerate large voltages. Be sure that
replacement parts possess the same safety charac­teristics as the originals. Also remember that the

mark, which appears in circuit diagrams and
parts lists, denotes components that have particu­larly important safety functions; be extra sure to
use only the designated components.

3. Always follow the original design

when mounting parts and routing
wires

The original layout includes various safety fea­tures, such as inclusion of insulating materials
(tubes and tape) and the mounting of parts above
the printer board. In addition, internal wiring has
been routed and clamped so as to keep it away
from hot or high-voltage parts. When mounting
parts or routing wires, therefore, be sure to du­plicate the original layout.

4. Inspect after completing service

After servicing, inspect to make sure that all
screws, components, and wiring have been
returned to their original condition. Also check
the area around the repair location to ensure that
repair work has caused no damage, and confi rm
safety.

5. When replacing chip components...

Never reuse components. Also remember that
the negative side of tantalum capacitors is easily
damaged by heat.

6. When handling flexible print
boards...

• The temperature of the soldering-iron tip

should be about 270°C.

• Do not apply the tip more than three times to

the same pattern.

• Handle patterns with care; never apply force.

Caution: Remember that hard disk drives are
easily damaged by vibration. Always handle
with care.

Sony Confidential

2

VGC-LA50/LA50B/LA70B/LA90S (J)

VGC-LS1 (AM)

TABLE OF CONTENTS

Section Title Page Section Title Page
Chapter1. SPECIFICATIONS ACCESSORIES
1-1.Specifications……………………………………………… A-1.ACCESSORIES……………………………………………

1-1

4-13

Chapter2. BLOCK DIAGRAM SUBSTITUTION PARTS LIST
2-1.VGC-LA Series…………………………………………… T-1.SUBSTITUTION PARTS LIST………………………

2-1

4-14

Chapter3. FRAME HARNESS Chapter5.OTHER

3-1. VGC-LA Series………………………………………… 5-1. Replacing the CPU……………………………………

3-1

5-1

Chapter4. EXPLODED VIEW AND PARTS LIST

Screws
S-1.Screws…………………………………………………
Main Chassis
M-1.Main Chassis………………………………………

4-2

4-3

History of the changes is shown as the

“Revision History” at the end of this data.

Main Board
B-1.Main Board…………………………………………

4-5

Rear Chassis
R-1.Rear Chassis………………………………………

4-7

CAMERA
C-1.CAMERA………………………………………………

4-9

ODD

D-1.ODD……………………………………………………
HDD
H-1.HDD……………………………………………………

4-11

4-12

Sony Confidential

3

VGC-LA50/LA50B/LA70B/LA90S (J)

VGC-LS1 (AM)

1-1. Specifications

r

+

(

)

r

VGC-LA50 VGC-LA50B VGC-LA70B VGC-LA90S*
CPU
Graphic

LCD
HDD
MEMORY(Slot1)
MEMORY(Slot2)

QUANTITY[STANDARD/MAX]

OPT-DRIVE
AC adapto
Wireless LAN
Camera
Battery
OS

CPU
Graphic

LCD
HDD
MEMORY(Slot1)
MEMORY(Slot2)

QUANTITY[STANDARD/MAX]

OPT-DRIVE
AC adapto
Wireless LAN
Camera
Battery
OS

Celeron-M 420(Yo1.6) Celeron-M 420(Yo1.6) Intel ICD T2300E(Yo1.66) *1)

945GM 945GM 945GM 945GM

19"WSXGA+

(Clear Black)

200GB 200GB 200GB *2)

512MB DDR2 533MHz 512MB DDR2 533MHz 512MB DDR2 533MHz

---

512MB/2GB 512MB/2GB 512MB/2GB

Super Multi

Drive +- DL

AC19V15 AC19V15 AC19V15 AC19V15

OOOO

OOOO

XXXX

XP Home XP Home XP Home XP Home

*1)Celeron-M 420(Yo1.6),Yonah-ICD T2300E(Yo1.66) *2)300GB,200GB,160GB *3)512MB*2,512MB*1

AM

VGC-LS1

Intel ICD T2400(Yo1.83) (C0)

945GM

19"WSXGA

Clear Black

250GB

1024MB DDR2 533MHz

1024MB DDR2 533MHz

2GB/2GB

Super Multi

Drive +- DL

AC19V15

O

O

X

XP MCE

4 [MA]

ԦThe model that is accompanied by asterisk(*) is the CTO model.

For the equipment configuration, refer to the CTO Information.

ԦThe trademarks or registered trademarks of above ,refer to page2.

3 [CHG]

19"WSXGA+

(Clear Black)

Super Multi

Drive +- DL

CHAPTER1.

J

19"WSXGA+

(Clear Black)

Super Multi

Drive +- DL

3 [CHG]

19"WSXGA+

(Clear Black)

*3)

Super Multi

Drive +- DL

Sony Confidential

1-1

VGC-LA50/LA50B/LA70B/LA90S (J)

VGC-LS1 (AM)

1-2.CTO Information

A

A

A

D

Model name:VGC-LA90S
Model number:PCG-232N (W/ WLAN)

OS:WinXP Home

Cel M 420 ICD T2300E

CPU

6-709-634-01 6-600-521-01
CPU CM1.60 CPU YDC1.66

3 [CHG]

HDD

LCD

Graphics

Memory

Opt.Drive

W-LAN

300GB 200GB 160GB

ASSY HDD 300GB ASSY HDD 200GB

19"WSXGA+
A-1181-050­ASSY LCD Samsung

945GM

512MB*2 512MB*1 Note: Refer to "M-1.Main Board" for part numbers.

SuperMulti Drive +- DL

A-1179-935-A
ASSY ODD PAN

802.11b/g
1-797-564-21
WIRELESS LAN CAR

SSY HDD 160GB

Note: Refer to "H-1.HDD" for part numbers.

Sony Confidential

1-2

VGC-LA50/LA50B/LA70B/LA90S (J)

VGC-LS1 (AM)

2-1.VGC-LA Series

g

A

A

19”SXGA
Panel

CRT Conn

Head Phone JACK

Mic In Jack

Int .Mic

Int .Speaker

TPS2220
Power sw

Line In Jack

AEC

VP1020

LM4991LD X2
Amplifier

RJ11

MDC 1.5
Modem

PCMCIA Conn

MS_Duo_Pro
Slot

SD/MMC Slot

i-Link 1394

EQ

RC458

TI PCI8412ZHK
CardBus
CardReader
I.LINK

CXD9872AK
Audio Codec

CHAPTER2.

BLOCK DIAGRAM

CPU Processor

ICD T2300E, Celeron-M 420

FSB
533/667 MHz

533/667 MHzLVD S

PCIE X 1

PCIE X 1

PCIE X 1

USB2.0

SAT

IDE AT

3.5” SATA
HDD

CRT

HD Audio

PCI BUS

North Bridge

Calistoga

X4 DMI
(Direct Media Interface)

South Bridge

ICH7-M

Clock Gen.
9Lpr321bklf

SO-DIMM
533/667 MHz
DDRII RAM

RF Receiver

Marvell 10/100
Ethernet
88e8036

Pulse
H0068NLT

Mini-Card
WLAN 802.11b/

Express Card TPS2231

USB2.0
CONN.X4

CAM(0.3M)

CIRPATA ODD

Power SW

RJ45

SYSTEM DC/DC

MAX8734A

INPUTS OUTPUTS
+5VALW
+5VALW_LDO
DCBATOUT +3VALW
+ECVCC

SYSTEM DC/DC

MAX8374

INPUTS OUTPUTS

+1_5VRUN
DCBATOUT +1_05VRUN

SC486

+1_8VSUS
DCBATOUT +0_9VRUN

CPU DC/DC

MAX8771

INPUTS OUTPUTS

DCBATOUT VHCORE

AMP DC/DC

MAX668

INPUTS OUTPUTS

+5VALW +12VRUN

SYSTEM DC/DC
SC1470/GMT966

(external VGA Core)

INPUTS OUTPUTS

DCBATOUT PEX_VDD
+1_5VRUN NV_VDD

S-Video In

Composite In

RCA L In

RCA R In

RF-In

Mini-PCI

TV-Tuner

Lid Switch
&LED

ENE KB3910SFC1
EC+KBC

Flash BIOS
&Mbits

LPS

SMB Channel 1

XBUS

CPU
FAN

Thermal Sensor
F75384M
(CPU/NB)

RF I/F Keyboard
+
FeliCa

Thermal Sensor
F75383M
(VGA/DDR So-DIMM)

Pure H/W Thermal Shotdown

Max6509

Sony Confidential

2-1

VGC-LA50/LA50B/LA70B/LA90S (J)

VGC-LS1 (AM)

FRAME HARNESS DIAGRAM

3-1. VGC-LA Series (TOP)

CHAPTER3.

3-1

Sony Confidential

VGC-LA50/LA50B/LA70B/LA90S (J)

VGC-LS1 (AM)

3-1. VGC-LA Series (BOTTOM)

3-2

Sony Confidential

VGC-LA50/LA50B/LA70B/LA90S (J)

VGC-LS1 (AM)