Sony UNI-OFS7C1 Specsheet

UNI-OFS7C1 & UNI-OFS7T1

Security Camera Enclosures

Vandal Resistant Outdoor Recessed Dome

The UNI-OFS7C1 & UNI-OFS7T1 are 7-inch recessed dome enclosures that offer vandal resistance, versatility, easy installation and camera protection in a compact size. These inconspicuous, recessed dome housings are speciﬁcally designed to accommodate the Sony SNC-RZ30 and SNC-RZ50 PTZ cameras.

KEY FEATURES

• Designed for SNC-RZ30 and SNC-RZ50 model of PTZ cameras.

• Vandal resistant, heavy duty construction, rated to IK10 standards.

• Designed to be water and dust tight to IP66 standards.

• UL rated for drop ceiling applications.

• Easy camera installation and servicing from below the ceiling or overhang.

• Includes a decorative trim ring with safety lanyard and captive security fasteners.

• Optically clear 0.118-inch (3mm) thick aspheric polycarbonate dome.

• Thermostatically controlled 24VAC heater.

• 24VAC input with separate power inputs for heater, blower and camera power and regulated DC 12V

with connector to cameras included.

• RoHS, WEEE, UL, CE compliant.

IR Illuminator

(Images 1)

BID SPECIFICATIONS

• The outdoor dome camera housing shall be a Sony model UNI-OFS7C1, UNI-OFS7T1. The housing shall be designed for the

SNC-RZ30 and SNC-RZ50 model of PTZ cameras. These models shall also be equipped with 24VAC input blowers and thermostatically controlled heaters. The back box shall be constructed from heavy 10 - gauge aluminum and be capable of being installed in its entirety from below the ceiling. The top will measure (H x D) 6.75 x 9.16 inches. The lower dome shall be made of an injection molded, 3mm thick, optically clear thermoplastic polycarbonate (1 F-stop light reduction for tinted lower dome). The lower dome shall be held in place with a die-cast aluminum trim ring (white powdercoat ﬁnish) that attaches with a minimum of three (3) security fasteners. The UNI-OFS7C1 / UNI-OFS7T1 shall be designed to be installed in either sheetrock or hard ceiling surfaces. Three rotating support arms will allow for adjustment to the ceiling material thickness. The unit shall be fully sealed, designed to meet IP66 dirt/water ingress rating. Unit will include thermostatically controlled 25-watt heater and blower unit. The blower shall draw 1.4W continuous power. The 25W heater shall turn on at 50°F (10°C) and turn off at 77°F (25°C). The housing shall support a temperature range of -20°F (-29°C) to 122°F (50°C).

• Note: To achieve the increased depth with the aspheric design for optimal camera lens to capsule orientation, the capsule

is slightly angled around the highest section. This creates a “line’, visible to the naked eye, around the upper most section of the capsule. This “line” serves as the geometric center line used to insure proper camera placement. It is not typically seen by the camera except with those models that have above the horizon tilt capability.

SPECIFICATIONS

Mechanical

Size (H x W x D) 11.2 x 11.2 x 11.5 inches (284 x 284 x 292mm) Weight 9 lbs. (4.1 kg) without camera Upper Housing 10 gauge aluminum, powdercoated Trim Ring Die-cast aluminum, powdercoated Lower Dome 0.118-inches (3mm), optically clear, thermoplastic polycarbonate

Environmental

Operating temperature -20°F (-29°C) to 122°F (50°C) Heater activates at 50°F (10°C), deactivates at 77°F (25°C), 24VAC, 25W Blower activates at Continuous operation

Models

UNI-OFS7C1 Outdoor, recessed mount, clear dome enclosure with 24VAC input, 12VDC camera power and heater/blower UNI-OFS7T1 Same speciﬁcations as UNI-ONS7C1 but with a tinted lower dome

Electrical

Heater and blower 24VAC 27 watts Camera 24VAC 25 watts

Shipping

Weight 10 lbs. (4.6 kg) Box dimensions 12 x 12 x 19 inches (305 x 305 x 483mm)

UNI-OFS7C1 & UNI-OFS7T1

SYSTEM CONFIGURATIONS

UNI-OFS7C1

UNI-OFS7T1

Network

HD monitor

Recording Server NSR-1000 Series

Recording Software

IMZ-NS100 Series

DIMENSIONS

9.16

(232.7)

¾ INCH CONDUIT ENTERANCE

7.41

(188.1)

8.00

(203.1)

4.12

(104.6)

12.11

(307.7)

Unit: inches (mm)

½ INCH CONDUIT ENTERANCE

11.18

(284)

Sony Electronics Inc. 1 Sony Drive Park Ridge, NJ 07656 sony.com/security

U-OFS7C1/OFS7T1

Reproduction in whole or in part without written permission is prohibited.

Features and speciﬁcations are subject to change without notice.

Weights and measurements are approximate.

Sony and the Sony make.believe logo are trademarks of Sony.

Printed in USA (05/12)