Sony SU-B461S, SU-B551S User Manual

4-268-384-61(1)

TV Stand/
Soporte para Televisor
con Bocinas Activas

Instructions

Mode d’emploi

Instrucciones

Instruções

Lea este manual antes de usar el producto

US

FR

ES

PT

SU-B551S
SU-B461S

© 2011 Sony Corporation

Important Safety
Instructions

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.

8) Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has
two blades and a third grounding prong. The wide blade
or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.

11) Only use attachments/accessories specified by the
manufacturer.

12) Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when
unused for long periods of time.

14) Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug
is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to rain
or moisture, does not operate normally, or has been
dropped.

Please observe the Additional Safety DOs and DON’Ts to
avoid electrical shock, short-circuit, fire, bodily injury or
property damage.

Owner’s Record

The model and serial numbers are located at the rear of the
TV Stand. Record these numbers in the spaces provided
below.
Refer to them whenever you call upon your Sony dealer
regarding this TV Stand.

Model Name

Serial No.

For Customers in Canada

This Class B digital apparatus complies with Canadian
ICES-003.

FCC Related Information

This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and

receiver.

– Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

– Consult the dealer or an experienced radio/TV technician

for help.

Pursuant to FCC regulations, you are cautioned that any
changes or modifications not expressly approved in this
manual could void your authority to operate this equipment.

2 (US)

On Safety

Thank you for purchasing this product.
Products by Sony are designed with safety in mind.
Incorrect use may result in a serious injury through
fire, electric shock, the product toppling over, or the
product being dropped. Be sure to observe the
precautions for safety to prevent such accidents.

This instructions manual shows the correct handling of the
product and important precautions necessary to prevent
accidents. Be sure to read this manual thoroughly and use the

product correctly. Keep this manual available for future
reference.

CAUTION

Specified products

This stand is designed for use with the Sony products
specified below. Do not install other than the specified
products.

The following products are subject to change without notice,
may be out of stock, or discontinued.
Also, certain models are sold in some regions.

LCD color TV

SU-B551S KDL-55HX92x/55HX82x/55NX72x
SU-B461S KDL-46HX92x/46HX82x/46NX72x

* In the actual model names, the “x” indicates numbers and/or

characters specific to each model.

Location of the identification label

Label for Model No. is located on the rear of the TV Stand.

WARNING

To reduce the risk of fire or electric shock, do not expose this
APPARATUS to rain or moisture.

NOTE ON AC adapter

Warning

To reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture.
To prevent fire or shock hazard, do not place objects filled
with liquids, such as vases, on the apparatus.
Do not install this equipment in a confined space, such as a
bookshelf or similar unit.

• Please ensure that the AC power outlet is installed near the
equipment and shall be easily accessible.

• Be sure to use the supplied AC adapter and AC power
cords.

• Do not use any other AC adapter. It may cause a
malfunction.

• Connect the AC adapter to an easily accessible AC power
outlet.

• Do not coil the AC power cord around
the AC adapter. The core wire may be
cut and/or it may cause a malfunction
of the TV.

• Do not touch the AC adapter with wet
hands.

• If you notice an abnormality in the AC adapter, disconnect
it from the AC power outlet immediately.

• The set is not disconnected from the AC source as long as
it is connected to the AC power outlet, even if the set itself
has been turned off.

US

English

The APPARATUS must never be exposed to dripping,
splashing, or spilling liquids of any kind.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

A TTENTION

RISQUE DE CHOC ELECTRIQUE,

NE PAS OUVRIR

PRECA UCION

RIESGO DE CHOQUE ELECTRICO

NO ABRIR

This symbol is intended to alert the user to the
presence of uninsulated “dangerous voltage”
within the APPARATUS’s enclosure that may
be of sufficient magnitude to constitute a risk of
electric shock to persons.

This symbol is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the APPARATUS.

WARNING

If the following precautions are not observed,
serious injury or death can result through fire,
electric shock, or the product toppling over.

Be sure to take measures to prevent
the TV Stand from toppling over.

If you fail to do so, the TV may topple over and cause injury.
Anchor the TV Stand and the rack, etc., to prevent toppling
over.

Be sure to install the TV Stand on a
stable surface.

If you install the TV Stand on an unstable
surface, it may lose its balance and topple
over or fall off. This may cause injury or
property damage.

Do not lean on or hang from the TV
with the TV installed on the TV
Stand.

The TV Stand may topple over, or the TV
may fall and cause serious injury or death.

(Continued)

3 (US)

Do not cover the ventilation holes of
the TV.

The ventilation openings in the TV are
necessary to ensure reliable operation of the
TV and to protect it from overheating.

• Do not block or cover the ventilation
openings with cloth or other materials.

• Never allow liquid or solid objects to fall
into the ventilation openings.

Do not place liquid filled objects
such as a vase or potted plant on the
APPARATUS.

Do not use a power line operated TV
set near water; for example, near a
bathtub, washbowl, kitchen sink,
laundry tub, wet basement or near a
swimming pool, etc.

AC power cord

• Do not allow the AC power cord or the connecting cable to
be pinched when you install the TV on the TV Stand. If
the AC power cord or the connecting cable is damaged,
this may result in fire or electric shock.

• Do not step on the AC power cord or
the connecting cable when you carry
the TV Stand. The AC power cord or
the connecting cable may be damaged,
and this may result in fire or electric
shock.

• If you stumble over the AC power cord
or the connecting cable, the TV Stand may topple over and
cause injury.

• Unplugging the AC power cord from the wall outlet will
completely remove power from the TV Stand.

CAUTION

If the following precautions are not observed,
injury or property damage may occur.

Do not install the TV in places
subject to extreme temperature,
such as in direct sunlight, near a
radiator or a heating vent.

The TV may overheat in such conditions which can cause
deformation of the enclosure and/or TV malfunction.

Do not install the TV in a place
exposed to direct air conditioning.

Moisture may condense inside and may cause TV
malfunction.

Allow adequate space around the TV
set to ensure proper air circulation.

Allow enough space around the TV as shown below.

30 cm

10 cm

(4 inches)

(11 7/8 inches)

10 cm
(4 inches)

6 cm
(2 3/8 inches)

Do not install any equipment other
than the specified product.

This TV Stand is designed for use with the specified product
only. If you install equipment other than specified, it may fall
or break, and cause injury. Illustrations used in this manual
show of the KDL-46NX72x, unless otherwise stated.

Be sure to secure the TV.

Secure the TV to the TV Stand using the supplied screws. If
the TV is not installed securely, it may fall, or the TV Stand
may topple over, and cause injury.

Notes on installation

Do not allow the TV Stand to be installed at an angle or
incline. To avoid this, observe the following precautions.

– If you install the TV Stand on a soft surface such as a

mat or a carpet, lay a board over the designated location
beforehand.

– Do not install the TV Stand in a place subject to direct

sunlight or near a heater.

– Do not install the TV Stand in a hot or humid place, or

outdoors.

4 (US)

Leave at least this much space around the set.

Note on use

Cleaning

To keep the TV Stand clean, occasionally wipe it with a dry
soft cloth. Stubborn stains may be removed by wiping with a
cloth slightly dampened with mild soap. Be sure to dry the
area afterwards with a dry soft cloth. Do not use chemicals,
such as thinner or benzine, as they damage the finish of the
TV Stand.

Be sure that two or more persons do
the installation work.

Be sure that two or more persons install the TV on the TV
Stand. If one person does the installation work alone, this
may result in an accident or injury.

Do not modify the TV Stand.

It may fall and cause injury.

Be sure to install the TV securely
following the instructions.

Tighten the screws securely. If the TV is not installed
securely, it may fall and cause injury.

Be careful not to injure your hands
or fingers while assembling.

• Do not move the TV Stand with holding the Neck section.

• Be careful not to hurt your fingers or hands when
installing the TV.

Copyrights

This TV Stand incorporates Dolby* Digital and Pro Logic

**

Surround and the DTS

* Manufactured under license from Dolby Laboratories.

Dolby, Pro Logic, and the double-D symbol are trademarks of
Dolby Laboratories.

** Manufactured under license under U.S. Patent #’s:

5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 & other
U.S. and worldwide patents issued & pending. DTS and the
Symbol are registered trademarks & DTS Digital Surround and
the DTS logos are trademarks of DTS, Inc. Product includes
software. © DTS, Inc. All Rights Reserved.

This TV Stand incorporates High-Definition Multimedia
Interface (HDMI™) technology.

HDMI, the HDMI Logo, and High-Definition Multimedia
Interface are trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other countries.

“BRAVIA” is a trademark of Sony Corporation.

Digital Surround System.

PRECAUTIONS

On power sources

• If you are not going to use the TV Stand for a long time, be
sure to disconnect the TV Stand from the wall outlet. To
disconnect the AC power cord, grasp the plug itself; never
pull the cord.

• AC power cord must be changed only at the qualified
service shop.

On operation

Before connecting other components, be sure to turn off and
unplug the TV Stand.

ENERGY STAR® is a U.S. registered mark.
EPA has determined that this product meets the

ENERGY STAR
efficiency.

®

guidelines for energy

5 (US)

Note on taking the TV Stand out from the carton

Be sure to hold the TV Stand and handle it carefully.

WARNING

If you allow the AC power cord to be pinched under or between
pieces of equipment, this may result in a short circuit or an electric
shock. If you stumble over the AC power cord or the connecting
cable, the TV Stand may topple over and cause injury.

Step 1:
Checking the parts

Name Quantity

Stand

1

Rear Cover L

Rear Cover R

Joint

Neck

*

1

*

1

1

Decide on the installation location and lay the TV
Stand down before installing the TV.

Since the TV is heavy, it is recommended that you decide on the
installation location beforehand, and assemble the TV Stand on
site.

Refer to the operating instructions supplied with your TV for
information on how to remove the Table-Top Stand from the TV.

Neck-Spacer

TV Stand Neck Attachment Screw
(PSW5 × 16) (× 3)
Joint Screw
(PSW5 × 16) (× 3)

Neck Screw
(PSW4 × 12)

AC adapter (ACDP-001) 1

AC power cord

High Speed HDMI cable 1

Instructions manual 1

Warranty card

* For SU-B551S model only.

1

1

6

4

6 (US)

Step 2:
Installing the TV

Before assembling

• Be sure to have a Phillips screwdriver that fits the screws prior to

the assembly.

• When using an electric screwdriver, set the torque

setting to approximately 1.5 N·m {15 kgf·cm}.

12 cm ~

Position the Neck-Spacer on the

1

TV Stand.

The Neck-Spacer is used for adjusting the height of the
Neck and TV.
Be sure to attach the Neck-Spacer.

For KDL-55HX82x/46HX82x/55NX72x/46NX72x
only:

Neck-Spacer

Attach the Neck and the Neck-

2

Spacer (for KDL-55HX82x/
46HX82x/55NX72x/46NX72x only)
to the TV Stand with the four
Neck Screws (PSW4 × 12)
(supplied).

Neck Screw
(PSW4 × 12)

Neck

When moving the TV, hold the TV

3

as shown below.

(Continued)

7 (US)

Attach the supplied Joint to the

4

rear of the TV with the three
screws (PSW5 × 16) (supplied).

Slide the supplied Joint up to attach.

Joint Screw
(PSW5 × 16)

Joint

~

• Make sure to keep the removed screws.

• When removing the Table-Top Stand from the Display, lay
the display face down on a stable work surface that is larger
than the Display.

• To prevent damaging the surface of the LCD display, make
sure to place a soft cloth on the work surface.

CAUTION

• If pressure or shock is applied to the surface of the Display,
the LCD display may break or become damaged.

• Lay the display face down on a stable and level surface
with the Table-Top Stand hanging over the edge of the
surface.
Having the display face and the base of the Table-Top
Stand on the same level surface will create an unstable
working condition and can damage the Display.

Secure the TV and the TV Stand

6

with the three TV Stand Neck
Attachment Screws (PSW5 × 16)
(supplied).

TV Stand Neck
Attachment
Screw
(PSW5 × 16)

Attach the Rear Cover to the TV

7

Stand. (For SU-B551S model
only)

Install the TV onto the TV Stand.

5

The TV is installed by placing it in the groove of the
TV Stand.

Arrow direction shows front of the TV Stand.

Rear Cover

8 (US)

Bundling the cables.

8

Use the cable clamper supplied with the TV.

~

• Do not bundle the AC power cord together with other
cables.

Step 3:
Safety measures to
prevent toppling over

WARNING

Be sure to take measures to prevent the TV Stand from
toppling over, and causing possible injury and damage.

Securing the TV and the TV
Stand

Sony strongly recommends taking
measures to prevent the TV from
toppling over.
Unsecured TVs may topple and result
in property damage, serious bodily
injury or even death.

Preventing the TV and the TV
Stand from toppling

• Secure the TV to a wall and/or board.

• Do not allow children to play or climb on furniture
and TV sets.

• Avoid placing or hanging items on the TV.

• Never install the TV on:
– slippery, unstable and/or uneven surfaces.
– furniture that can easily be used as steps, such as a

chest of drawers.

• Install the TV where it cannot be pulled, pushed, or
knocked over.

• Route all AC power cords and connecting cables so
that they are not accessible to curious children.

(Continued)

9 (US)

Recommended measures to
secure the TV and the TV Stand

Consider the following measures when securing your
TV to a board (not supplied).

1 Secure the board for the TV.

Make sure the board can adequately support the
weight of the TV. Use two angle braces (not
supplied) to secure the board. For each angle brace
use the appropriate hardware to:

• Attach one side of the angle brace to the wall stud.

• Attach the other side to the board.

Angle brace
(not supplied)

Board

2 Secure the TV to the board.

Use the optional hardware listed below (not
supplied):

• M4 × 16 machine screw (screwed into the TV Stand)

• A screw or similar (attach it to the board)

• Rope or chain (strong enough to support the weight
of the TV). Make sure that there is no excess slack in
the rope or chain.

An alternative way to secure the TV is with an optional
Sony Support Belt Kit.

3 Anchor the TV to the Wall.

Anchor the TV to the wall by using bolts, wall
anchor and chain (or rope).

~

• TV SET is shipped with screws attached to the rear of the
TV. (They are fastened in the screw holes for wall
mounting.) Be sure to remove the upper two screws prior to
anchoring the TV on a wall.

• Securing the TV to the board without securing the TV and
the board to the wall provides minimum protection against
the TV toppling over. For further protection, be sure to
follow the three measures recommended.

Anchor bolts (M6, not supplied)

Rope or chain
(not supplied)

Wall-anchor
(not supplied)

Wall­mount
holes

Screw hole
on the TV
Stand

Screw
(not supplied)

M4 × 16
machine
screw (not
supplied)

Rope or
chain (not
supplied)

~

Contact Sony Customer Support to obtain the optional
Support Belt Kit by providing your TV Stand model name
(SU-B551S/461S).

• For United States call: 1-800-488-7669 or visit:
www.sony.com/accessories

• For Canada call: 1-877-899-7669

10 (US)

Step 4:
Connecting the TV and
Player

Connect the TV with an HDMI IN 1
to the TV Stand using an HDMI
cable.

By connecting Sony “BRAVIA” Sync-compatible
components using HDMI cables, operation can be
simplified when you set the Control for HDMI function
for the TV.

Blu-ray Disc Player, etc.

• Check the setup of the connected component if an image is
poor or the sound does not come out of a component
connected via the HDMI cable.

• Audio signals (sampling frequency, bit length, etc.)
transmitted from an HDMI jack may be suppressed by the
connected component.

• Sound may be interrupted when the sampling frequency or
the number of channels of audio output signals from the
playback component is switched.

• When the connected component is not compatible with
copyright protection technology (HDCP), the image and/or
the sound from the HDMI TV OUT jack may be distorted
or may not be output.
In this case, check the specification of the connected
component.

• We do not recommend using an HDMI-DVI conversion
cable.

• This system supports Deep Color, “x.v.Color,” and 3D
transmission.

HDMI cable
(not supplied)

HDMI cable
(supplied)

~

• Please do not connect PC with HDMI.

• The TV Stand is compatible with the Audio Return
Channel (ARC) function. If you connect the TV Stand to
the ARC compatible TV’s HDMI IN 1 via an HDMI cable,
you do not need to connect the TV to the TV Stand with the
digital optical cord.

• You can see the letters “ARC” beside the TV’s HDMI jack
if it is compatible with the ARC function. Even if you
connect an HDMI cable to the jack, if the HDMI input jack
is not compatible with the ARC function, you cannot use
the ARC function.

• The ARC function is available only when Control for
HDMI is set to on.

z

• Even if the TV Stand is turned off (active standby mode),
the HDMI signal will be sent from the connected
component to the TV via the HDMI connection. You can
enjoy image and sound from the component on the TV.

Notes on HDMI connections

• Use a High Speed HDMI cable. If you use a Standard
HDMI cable, 1080p, Deep Color, or 3D images may not be
displayed properly.

• We recommend that you use an HDMI-authorized cable.

11 (US)

Step 5:

Step 6:
Connecting the AC
power cord

Connect all components and TV to the TV Stand
before connecting the AC power cord of the TV
Stand’s AC Adapter to a wall outlet.

~

• Connect the TV Stand to an easily accessible AC outlet.
Should you notice an abnormality in the TV Stand,
disconnect the main plug from the AC outlet immediately.

Performing the TV
settings

1 Set to “On” in the “Control for HDMI”

function.

Press the HOME button of the remote control of the
TV and select the menu as follows;

Settings > External Inputs > HDMI Set-up

> Control for HDMI > On

2 Set to “Audio System” in “Speakers” menu.

Press the SYNC MENU button of the remote
control of the TV and select the menu as follows;
Speakers > Audio System

~

After completing the settings for procedure 1 and 2, the :
(power) indicator lights up in green.

z

• Scene Select mode

This TV Stand is synchronized with the TV sound settings
automatically, and works together with the Scene Select
function, for you to choose your preferred sound for the
selected scene.
To change the sound, change the TV sound settings.

Scene Select

Auto

General

Cinema

Sports

Music

Animation

Photo

Game

Graphics

HDMI1

12 (US)

• Position Control

If you set “External Device Control” to “On” of the TV, this
TV Stand adjusts the volume balance between the left and
right speakers according to viewing position. (Setting of the
TV)
To set “Position Control”, press the HOME button, then

select > Preferences > Position Control > the desired
option.

Troubleshooting

Specifications

Sound

No sound:

• Check the HDMI cable connection.

• Check the settings for “Control for HDMI” and

“Audio System” in Step 6 (page 12).

Using with headphones:

• Switch “Audio System” to “TV Speakers” in the

“Speakers” setting.

Using with external equipment for dual sound:

• If the sound cannot be switched, switch the audio

output setting of the external equipment to activate
PCM.

Indicator

Although the TV power is turned on, the : (power)
indicator of the TV Stand does not light up:

• Check whether the AC adapter’s AC power cord is

plugged into a wall outlet.

• Consult customer support services.

Flash : (power) indicator red:

• A malfunction may have occurred with this product.

Check how many times the LED flashes, and consult
Sony service center.

Indicator

336 mm
(13 1/4 inches)

Dimensions:
mm (inches)

Stand Weight:

A

B

C

D

E

64 mm
(2 5/8

38 mm
(1 1/2 inches)

SU-B551S SU-B461S

102

(4 1/8)

190

(7 1/2)

1,276

(50 1/4)

55HX92x:

796 (31 3/8)

55HX82x:

798 (31 1/2)

55NX72x:

797 (31 1/2)

292

(11 1/2)

6.3 kg

(13.9 lb)

inches)

118

(4 3/4)

159

(6 3/8)

1,079

(42 1/2)

46HX92x:

686 (27)

46HX82x:

687 (27 1/8)

46NX72x:

687 (27 1/8)

277

(11)

5.6 kg

(12.4 lb)

1 : (power) indicator

Lights as follows:
Green: The TV Stand is power on. (“Audio System”

is set for “Speakers.”)

Off: The TV Stand is standby or power off.

2 Audio format indicators

Light up according to the audio format that is being
input to the TV Stand.

D: Dolby Digital

DTS

PLII: Dolby Pro Logic II

Amplifier section

Rated Output Power Front: 10 W + 10 W, (per channel)

8 ohms, 1 kHz, THD less than 1%
Subwoofer: 20 W, 6 ohms, 100 Hz,
THD less than 1%

(Continued)

13 (US)

HDMI section

Connector HDMI™ Connector
Video inputs/outputs 720 × 480p (60Hz) 16:9

1280 × 720p (60Hz) 16:9
1920 × 1080i (60Hz) 16:9
1280 × 720p (50Hz) 16:9
720 (1440) × 480i (60Hz) 4:3
720 (1440) × 480i (60Hz) 16:9
720 (1440) × 576i (50Hz) 4:3
720 (1440) × 576i (50Hz) 16:9
1920 × 1080p (60Hz) 16:9
720 × 576p (50Hz) 16:9
1920 × 1080i (50Hz) 16:9
1920 × 1080p (50Hz) 16:9
1920 × 1080p (24Hz) 16:9
1920 × 1080p (30Hz) 16:9
1280 × 720p (24Hz) 16:9
1280 × 720p (30Hz) 16:9

Deep Color: 30bit/36bit
Video inputs/ 1280 × 720p@59.94/60 Hz
outputs (3D) Frame packing

1920 × 1080i@59.94/60 Hz

Frame packing

1920 × 1080i@59.94/60 Hz

Side-by-Side (Half)

1920 × 1080p@59.94/60 Hz

Side-by-Side (Half)

1280 × 720p@50 Hz

Frame packing

1920 × 1080i@50 Hz

Frame packing

1920 × 1080i@50 Hz

Side-by-Side (Half)

1920 × 1080p@50 Hz

Side-by-Side (Half)

1920 × 1080p@24 Hz

Frame packing

Deep Color: 30bit/36bit
Audio inputs Linear PCM 2ch/5.1ch/7.1ch

Dolby Digital

DTS

Each signal is compliant with 32, 44.1,

48 kHz.

General

Power requirements 100 – 240 V, 50/60 Hz
Power consumption

On: 12 W
Standby: 0.7 W

• Standby power consumption: 0.7 W

• Halogenated flame retardants are not used in the certain
printed wiring boards.

• Over 85% power efficiency of amplifier block is
achieved with the full digital amplifier, S-Master.

Design and specifications are subject to change without
notice.

Speakers
Front speaker unit

Speaker system 2-way 2-driver, Bass reflex type
Speaker unit Woofer: 30 × 100 mm cone type ×1

Tweeter: 30 mm cone type

Subwoofer unit

Speaker system Subwoofer, Bass reflex type
Speaker unit 70 mm cone type

14 (US)

Consignes de sécurité
importantes

1) Lisez les directives suivantes.

2) Conservez ces directives.

3) Observez et respectez tous les avertissements.

4) Suivez toutes les directives.

5) N’utilisez pas cet appareil près de l’eau.

6) Nettoyez cet appareil uniquement avec un chiffon sec.

7) Ne bouchez pas les fentes de ventilation. Respectez les
directives du fabricant pour l’installation de l’appareil.

8) N’installez pas l’appareil à proximité d’une source de
chaleur telle qu’un radiateur, une bouche d’air chaud, une
cuisinière ou tout autre appareil (y compris des
amplificateurs) émettant de la chaleur.

9) Ne désactivez pas le dispositif de sécurité appliqué à la
fiche polarisée ou à la fiche avec mise à la terre. Une
fiche polarisée est équipée de deux lames dont l’une est
plus large que l’autre. Une fiche avec mise à la terre est
équipée de deux lames et une broche destinée à la mise à
la terre. La lame la plus large et la troisième broche sont
des dispositifs de sécurité. Si vous ne réussissez pas à
brancher la fiche fournie dans la prise de courant,
consultez un électricien et faites remplacer la prise par
une neuve.

10) Ne placez pas le cordon d’alimentation dans des endroits
passants et assurez-vous qu’il ne peut pas être pincé,
surtout au niveau des fiches, de la prise de courant et à
l’endroit où il sort de l’appareil.

11) Utilisez uniquement les éléments de raccordement et les
accessoires recommandés par le fabricant.

12) Utilisez l’appareil uniquement avec le chariot,
le trépied, le support ou la table recommandés
par le fabricant ou achetés avec l’appareil.
Lorsque vous utilisez un chariot, prenez des
précautions en déplaçant le chariot et l’appareil afin de ne
pas les renverser, ce qui pourrait entraîner des blessures.

13) Débranchez cet appareil en cas d’orage ou lorsque vous
ne l’utilisez pas pendant de longues périodes.

14) Pour toute réparation, adressez-vous à un réparateur
qualifié. Faites réparer l’appareil s’il a été endommagé de
quelque manière que ce soit, par exemple si le cordon
d’alimentation ou sa fiche sont endommagés, si du
liquide ou tout autre corps étranger a pénétré dans
l’appareil, si l’appareil a été exposé à la pluie ou à
l’humidité, s’il ne fonctionne pas normalement ou s’il est
tombé.

Fiche d’identification

Les numéros de modèle et de série sont indiqués à l’arrière
du téléviseur. Inscrivez ces numéros dans les espaces ci­dessous.
Faites-y référence chaque fois que vous appelez votre
détaillant Sony au sujet de ce support TV.

N° de modèle

N° de série

Pour les clients résidant au Canada

Cet appareil numérique de la classe B est conforme à la
norme NMB-003 du Canada.

AVIS

Cet appareil a été soumis à l’essai et s’est avéré conforme aux
limites pour un appareil numérique de classe B,
conformément à la section 15 des règlements de la FCC. Ces
normes sont conçues pour assurer une protection raisonnable
contre les interférences nuisibles dans un environnement
résidentiel. Cet appareil génère, utilise et peut émettre de
l’énergie radioélectrique et, s’il n’est pas installé ou utilisé
selon les directives, peut causer des interférences nuisibles
aux communications radio. Cependant, il n’existe aucune
garantie que des interférences ne se produiront pas dans une
installation particulière. Si ce matériel est source
d’interférences nuisibles pour la réception radio ou télévisée,
ce qui peut être déterminé en mettant l’appareil hors tension,
puis sous tension, il est recommandé de tenter d’éliminer ces
interférences en appliquant l’une ou plusieurs des mesures
suivantes :
– Réorienter ou déplacer l’antenne réceptrice.
– Éloigner l’appareil du récepteur.
– Brancher l’appareil dans une prise d’un circuit différent de

celui qui alimente le récepteur.

– Consulter le détaillant ou un technicien radio ou télévision

qualifié pour obtenir de l’aide.

Conformément aux règlements de la FCC, vous êtes averti
que tous les changements ou modifications non
expressément approuvés dans ce manuel pourraient annuler
tous vos droits relatifs à l’utilisation de ce produit.

Veuillez respecter les consignes de sécurité supplémentaires
pour éviter les risques d’électrocution, de court-circuit,
d’incendie, de blessure et de dommages à la propriété.

2 (FR)

Sécurité

Merci d’avoir acheté ce produit.
Les produits fabriqués par Sony sont conçus pour
être sécuritaires. Un mauvais usage peut provoquer
des blessures graves suite à un incendie, une
électrocution, un basculement ou une chute du
produit. Assurez-vous d’observer les mesures de
sécurité afin d’éviter de tels accidents.

Le présent manuel d’instruction illustre la façon correcte de
manipuler ce produit ainsi que les mesures à prendre
nécessaires en vue d’éviter les accidents. Lisez attentivement
ce manuel et utilisez le produit correctement. Conservez ce
manuel pour le consulter dans l’avenir.

ATTENTION

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

A TTENTION

RISQUE DE CHOC ELECTRIQUE,

NE PAS OUVRIR

PRECA UCION

RIESGO DE CHOQUE ELECTRICO

NO ABRIR

Ce sigle vise à signaler à l’utilisateur la
présence d’une « tension dangereuse » non
isolée au sein de l’appareil, dont la puissance
peut être suffisante pour provoquer un risque
d’électrocution.

Ce sigle vise à signaler à l’utilisateur la
présence d’une documentation importante
concernant les instructions de fonctionnement
et d’entretien de cet appareil.

Produits

Ce support est conçu pour être utilisé avec les produits Sony
mentionnés ci-dessous. N’y installez pas d’autres produits
que ceux mentionnés.

Les produits suivants sont sujets à changement sans préavis,
peuvent être épuisés ou abandonnés.
Certains modèles sont aussi vendus dans certaines régions.

Téléviseur couleur LCD

SU-B551S KDL-55HX92x/55HX82x/55NX72x
SU-B461S KDL-46HX92x/46HX82x/46NX72x

* Dans les noms de modèle actuels, le « x » indique les chiffres

et/ou caractères spécifiques à chaque modèle.

Emplacement de l’étiquette d’identification

L’étiquette du n° de modèle est située à l’arrière du support
TV.

AVERTISSEMENT

Afin de réduire les risques d’incendie et d’électrocution,
n’exposez pas cet appareil à la pluie ou à l’humidité.

L’appareil ne doit jamais être exposé aux éclaboussures, au
déversement ou à l’égouttement de liquides, quels qu’ils
soient.

REMARQUE au sujet de
l’adaptateur CA

Avertissement

Afin de réduire les risques d’incendie et de choc électrique,
n’exposez pas cet appareil à la pluie ou à l’humidité.
Pour éviter les risques d’incendie et d’électrocution, ne
placez pas d’objets contenant des liquides, tels qu’un vase,
sur l’appareil.
N’installez pas cet appareil dans un espace restreint, comme
une bibliothèque ou un meuble semblable.

• Assurez-vous que la prise de courant est située à proximité
de l’appareil et qu’elle est facilement accessible.

• Utilisez l’adaptateur de courant CA et le cordon
d’alimentation fournis.

• N’utilisez aucun autre adaptateur de courant CA. Il
pourrait entraîner des problèmes de fonctionnement.

• Branchez l’adaptateur de courant CA dans une prise de
courant facilement accessible.

• N’enroulez pas le cordon
d’alimentation CA autour de
l’adaptateur de courant CA. Cela
pourrait provoquer une entaille dans le
fil de noyau ou provoquer un mauvais
fonctionnement du téléviseur.

• Ne touchez pas l’adaptateur de courant CA avec des mains
mouillées.

• Si vous constatez une anomalie de l’adaptateur de courant
CA, débranchez-le immédiatement de la prise de courant.

• L’appareil n’est pas débranché de la source de courant CA
tant qu’il demeure branché à la prise de courant, même si
l’appareil lui-même est hors tension.

FR

Français

(Suite)

3 (FR)

AVERTISSEMENT

Si les mesures suivantes ne sont pas
observées, cela peut entraîner un décès ou des
blessures graves lors d’un incendie,
d’électrocution ou du basculement du produit.

Prenez les mesures nécessaires afin
d’éviter que le téléviseur ne bascule.

Le téléviseur peut alors basculer et provoquer des blessures.
Fixez le support TV et le bâti, etc. pour qu’il ne bascule pas.

Assurez-vous d’installer le support
TV sur une surface stable.

Si vous installez le téléviseur sur une
surface instable, il peut être en déséquilibre
et basculer ou tomber. Ceci pourrait alors
causer des blessures ou des dommages.

Ne vous appuyez pas et ne vous
suspendez pas au téléviseur lorsque
ce dernier est installé sur le support
TV.

Le téléviseur peut basculer ou tomber et
entraîner la mort ou des blessures graves.

N’installez pas le téléviseur dans des
endroits sujets à des extrêmes de
température, par exemple à la
lumière directe du soleil ou encore
près d’un radiateur ou d’une bouche
de chaleur.

Dans de telles conditions, le téléviseur pourrait surchauffer,
ce qui peut provoquer une déformation du boîtier et/ou des
problèmes de fonctionnement.

N’installez pas le téléviseur dans un
endroit exposé directement à l’air
climatisé.

De l’humidité pourrait se condenser à l’intérieur du téléviseur
et provoquer des problèmes de fonctionnement.

Laissez un espace suffisant autour
du téléviseur pour assurer une
circulation d’air adéquate.

Laissez un espace suffisant autour du téléviseur, tel
qu’illustré ci-dessous.

30 cm

10 cm

(4 pouces)

(11 7/8 pouces)

10 cm

(4 pouces)

6 cm
(2 3/8 pouces)

Ne bouchez pas les trous de
ventilation du téléviseur.

Les orifices de ventilation du téléviseur sont
nécessaires pour assurer son
fonctionnement fiable et le protéger de la
surchauffe.

• Ne bloquez pas et ne couvrez pas les
orifices de ventilation à l’aide de chiffons
ou autres.

• Ne déversez jamais de liquides ou ne laissez jamais
tomber d’objets dans les orifices de ventilation.

Ne placez pas d’objets contenant
des liquides, tels qu’un vase ou une
plante en pot, sur l’appareil.

N’utilisez pas un téléviseur alimenté
par une source de courant électrique
près de l’eau (baignoire, lavabo,
évier de cuisine, cuve de lavage,
piscine, sous-sol humide, etc.).

Laissez au moins cet espace autour du téléviseur.

Cordon d’alimentation CA

• Assurez-vous de ne pas pincer le cordon
d’alimentation CA ou le câble de raccordement lors de
l’installation du téléviseur sur le support TV. Si le cordon
d’alimentation CA ou le câble de raccordement est
endommagé, il risque de se produire un incendie ou une
électrocution.

• Ne marchez pas sur le cordon
d’alimentation CA ou sur le câble de
raccordement lorsque vous transportez
le support TV. Le cordon
d’alimentation CA ou le câble de
raccordement peut être endommagé et
cela peut provoquer un incendie ou une
électrocution.

• Si vous trébuchez sur le cordon d’alimentation CA ou sur
le câble de raccordement, le support TV peut basculer et
provoquer des blessures.

• Pour interrompre complètement l’alimentation électrique
du support TV, débranchez le cordon d’alimentation CA
de la prise de courant.

4 (FR)