Sony STRV-828 Service manual
STR-DE835/DE935/SE591/V828
SERVICE MANUAL
US Model
STR-DE835/DE935/SE591
Canadian Model
STR-DE835/DE935
E Model
Australian Model
PX Model
STR-DE835
Photo : STR-DE935
Manufactured under license from Dolby Laboratories
Licensing Corporation.
“DOLBY” and the double-D symbol a are trademarks
of Dolby Laboratories Licensing Corporation.
SPECIFICATIONS
AUDIO POWER SPECIFICATIONS:
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
With 8 Ω loads, both channels driven, from 20 – 20,000 Hz; rated 110
W(STR-DE935) and 100 W(STR-DE835/SE591) per channel minimum
RMS power, with no more than 0.09% toral harmonic distortion from 250
mW to rated output (USA model only).
Amplifier section
POWER OUTPUT
Stereo mode (8Ω 20Hz – 20kHz, THD 0.09%)
USA, Canadian models
STR-DE935 : 110W + 110W
STR-DE835/SE591 : 100W + 100W
Other models
95W + 95W
(8Ω 20Hz-20kHz, THD 0.09%)
135W + 135W
(8Ω at 1kHz, THD 10%)
Surround mode USA, Canadian models
(8Ω at 1kHz, THD 0.8%)
STR-DE935
Front: 110W + 110W
Centera): 110W
Reara): 110W + 110W
STR-DE835/SE591
Front: 100W + 100W
Centera): 100W
Reara): 100W + 100W
Other models
Rated power
(8Ω at 1kHz, THD 0.7%)
Front: 100W + 100W
Centera): 100W
Reara): 100W + 100W
Chinese Model
STR-V828
Reference
(8Ω 20Hz-20Hz, THD 0.9%)
Front: 95W + 95W
Centera): 95W
Reara): 95W + 95W
(8Ω at 1kHz, THD 10%)
Front: 135W + 135W
Centera): 135W
Reara): 135W + 135W
a) Depending on the sound field settings and the source, there may be no
sound output.
Dynamic power output
STR-DE935 : 165W + 165W, 8Ω
250W + 250W, 4Ω
STR-DE835/SE591 : 155W + 155W, 8Ω
240W + 240W, 4Ω
Frequency response PHONO: RIAA
equalization curve ±0.5 dB
CD, TAPE, MD/DAT, TAPE/MD, DVD/LD,
TV/SAT, VIDEO 1, 2, and VIDEO 3(STRDE935 only):
10Hz – 50kHz + 0.5/–2dB (with sound field,
equalizer, and bass boost bypassed)
— Continued on next page —
FM STEREO FM-AM RECEIVER
MICROFILM
Inputs (Analog) PHONO:
Sensitivity: 2.5mV
Impedance: 50kΩ
S/Nb): 86dB (A, 2.5mVc))
5.1CH INPUT, CD,DVD/LD,TAPE,MD/
DAT,TAPE/MD,TV/SAT,VIDEO1,2 and
VIDEO3(STR-DE935 only):
Sensitivity: 150mV
Impedance: 50kΩ
S/Nb): 96dB (A, 150mVc))
b) Input short
c) Weighted network, input level
Inputs (Digital) DVD/LD (coaxial):
Sensitivity: –
Impedance: 75Ω
S/N: 100dB (A, 20kHz LPF)
DVD/LD, TV/SAT, MD/TAPE (Optical):
Sensitivity: –
Impedance: –
S/N: 100dB (A, 20kHz LPF)
Outputs TAPE,MD/DAT,TAPE/MD, (REC OUT);
VIDEO1,2 (AUDIO OUT):
Voltage: 150mV,
Impedance: 10kΩ
SUB WOOFER:
Voltage:2V
Impedance: 1kΩ
PHONES:
Accepts low-and high-impedance headphones
BASS BOOST +6dB at 70Hz
Sampling Frequency 48kHz
EQ BASS: 100Hz – 1.0kHz (21steps)
MID: 500Hz – 5.0kHz (21steps)
TREBLE:1.0kHz – 10kHz (21steps)
Gain levels: ±10dB, 1dB step
FM tuner section
Tuning range 87.5 – 108.0MHz
Antenna terminals 75Ω, unbalanced
Sensitivity Mono: 18.3dBf, 2.2µV/75 Ω
Stereo: 38.3dBf, 22.5µV/75Ω
Usable sensitivity 11.2dBf, 1µV/75Ω
S/N Mono: 76dB
Stereo: 70dB
Harmonic destortion at 1kHz
Mono: 0.3%
Stereo: 0.5%
Separetion 45dB at 1kHz
Frequency response 30Hz – 15kHz + 0.5/–2dB
Selectivity 60dB at 400kHz
AM tuner section
Tuning range USA, Canadian, E, PX models
With 10-kHz tuning scale:
530 – 1,710kHz
With 9-kHz tuning scale:
531 – 1,710kHz
d)
d)
Other models
531 – 1,620kHz
Antenna Loop antenna
Usable sensitivity 50dB/m (at 1,000kHz or 999kHz)
S/N 54dB (at 50mV/m)
MODEL IDENTIFICATION
– BACK PANEL –
PART NO.
Harmonic destortion 0.5% (50mV/m, 400kHz)
Selectivity At 9kHz: 35dB
At 10kHz: 40dB
d) You can change the AM tuning scale to 9kHz. After tuning in any AM
station, turn off the receiver. Hold down the TUNING + button and
press the 1/u button. All preset stations will be erased when you
change the tuning scale. To reset the scale to 10kHz, repeat the
procedure.
Video section
Inputs VIDEO : 1Vp-p 75Ω
S-video : Y : 1Vp-p 75Ω
C : 0.286Vp-p 75Ω
Outputs VIDEO : 1Vp-p 75Ω
S-video : Y : 1Vp-p 75Ω
C : 0.286Vp-p 75Ω
General
System Tuner section:
PLL quartz-locked digital synthesizer system
Preamplifier section:
Low-noise NF type equalizer
Power amplifier section:
Pure-complementary SEPP
Power requirements USA, Canadian models
120V AC, 60Hz
Australian model
240V AC, 50Hz
Chinese model
220 – 230V AC 50/60Hz
E, PX models
120 or 220 or 240V AC 50/60Hz
(adjustable with the voltage selector)
Power consumption STR-DE935
USA: 290W
Canada: 345VA
STR-DE835/SE591
USA: 280W
Canada: 335VA
Australian: 230W
E, PX: 300W
Chinese: 200W
AC outlets USA, Canadian models
2switched, total 120W/1A
Other models
1switched, max 100W
Dimensions 430 × 376 × 157.5mm
(17 × 147/8 × 61/4 in.)
including projecting parts and controls
Mass (Approx.) 10.2kg (22 lbs. 8 oz.)
Supplied accessories FM wire antenna (1)
AM loop antenna (1)
Audio/video/control S connecting cord (1)
Control S connecting cord (1)
FM antenna adapter (1)
STR-DE935 only
Remote commander RM-LJ302 (remote) (1)
R6 (size-AA) alkaline batteries (3)
Other models
Remote commander RM-PP402 (remote) (1)
R6 (size-AA) batteries (2)
Design and specifications are subject to change without notice.
MODEL
DE835: US model
DE835: Singapore, Malaysia models
V828
DE835: Australian model
DE835: E, PX models
DE935
SE591
DE835: Canadian model
PARTS No.
4-217-900-3π
4-217-900-4π
4-217-900-5π
4-217-900-6π
4-217-900-7π
4-217-900-8π
4-217-900-9π
4-218-334-11
— 2 —
TABLE OF CONTENTS
SAFETY CHECK-OUT
(US model only)
After correcting the original service problem, perform the
following safety checks before releasing the set to the customer:
Check the antenna terminals, metal trim, “metallized” knobs, screws,
and all other exposed metal parts for AC leakage. Check leakage as
described below.
LEAKAGE
The AC leakage from any exposed metal part to earth ground
and from all exposed metal parts to any exposed metal part having
a return to chassis, must not exceed 0.5 mA (500 microampers).
Leakage current can be measured by any one of three methods.
1. A commercial leakage tester , such as the Simpson 229 or RCA
WT -540A. Follow the manufacturers’ instructions to use these
instruments.
2. A battery-operated AC milliammeter. The Data Precision 245
digital multimeter is suitable for this job.
3. Measuring the voltage drop across a resistor by means of a
VOM or battery-operated AC voltmeter . The “limit” indication
is 0.75 V, so analog meters must have an accurate low-voltage
scale. The Simpson 250 and Sanwa SH-63Trd are examples of
a passive VOM that is suitable. Nearly all battery operated
digital multimeters that have a 2V AC range are suitable. (See
Fig. A)
To Exposed Metal
Parts on Set
1. GENERAL ··········································································4
2. TEST MODE······································································ 6
3. DIAGRAMS
3-1. Block Diagram Main Section ··········································· 7
3-2. Block Diagram Power Section ········································· 9
3-3. Circuit Board Location ····················································· 11
3-4. Schematic Diagram Digital Section(1/3) ······················· 13
3-5. Schematic Diagram Digital Section(2/3) ······················· 15
3-6. Schematic Diagram Digital Section(3/3) ······················· 17
3-7. Printed Wiring Board Digital Section(1/2)····················· 19
3-8. Printed Wiring Board Digital Section(2/2)····················· 21
3-9. Printed Wiring Board Display Section ··························· 23
3-10. Schematic Diagram Display Section ······························ 25
3-11. Printed Wiring Board Surround Section························· 27
3-12. Schematic Diagram Surround Section ··························· 29
3-13. Printed Wiring Board Rear AMP Section······················· 31
3-14. Schematic Diagram Rear AMP Section ·························33
3-15. Printed Wiring Board Power Section ····························· 35
3-16. Schematic Diagram Power Section ································ 37
3-17. Printed Wiring Board Video Section ······························ 39
3-18. Schematic Diagram Video Section ································· 41
3-19. Printed Wiring Board Main Section ······························· 43
3-20. Schematic Diagram Main Section(1/2) ·························· 45
3-21. Schematic Diagram Main Section(2/2) ·························· 47
3-22. IC Pin Function ································································ 49
3-23. IC Block Diagrams ··························································· 59
4. EXPLODED VIEWS
4-1. Front Panel Section ·························································· 62
4-2. Chassis Section································································· 64
AC
0.15µF
1.5k
Ω
voltmeter
(0.75V)
Earth Ground
Fig. A. Using an AC voltmeter to check AC leakage .
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK ! OR DOTTED LINE WITH
MARK ! ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY .
5. ELECTRICAL PARTS LIST ······································· 66
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFÉS P AR UNE MARQUE ! SUR LES
DIAGRAMMES SCHÉMA TIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
— 3 —
Identifying the Parts
Front Panel
SECTION 1
GENERAL
1 1/u switch
2 Function buttons
3 INPUT MODE button
4 5.1CH INPUT button
5 MASTER VOLUME control
6 MUTING button
7 SPEAKERS selector
PHONES jack
8 2ND AUDIO button (DE935 MODEL)
9 DISPLAY button
0 DIMMER button
!¡ A.F.D button/indicator
MODE button/indicator
2CH button/indicator
!™ MULTI CHANNEL DECODING indicator
!£ BASS BOOST button
!¢ EQUALIZER button
!∞ DIRECT button
SHIFT button
Numeric buttons (1 to 0)
AM button
FM button
FM MODE button
MEMORY button
— 4 —
!§ TUNNIG +/- buttons
PRESET +/- buttons
!¶ LEVEL button
!• SUR button
!ª EQ button
@º Cursor buttons(</>)
@¡ Jog dial
@™ SET UP button
@£ NAME button
@¢ ENTER button
SECTION 2
SERVICING NOTE
Rear Panel
1 2 3 4 5 6 7
!¡!™!£!¢!∞!§!¶!•!ª@º@¡
1 ANTENNA
2 DIGITAL
3 5.1 CH INPUT
4 SPEAKERS (FRONT)
5 SPEAKERS (REAR)
6 SPEAKERS (CENTER)
7 WOOFER
8 INPEDANCE SELECTOR
9 AC power cord
!º AC OUTLET
!¡ S-LINK
!™ 2ND AUDIO OUT
!£ VIDEO 1
!¢ VIDEO 2
!∞ DVD/LD
(US, Canadian, Australian models)
DVD
(EXCEPT US, Canadian, Australian models)
!§ TV/SAT
(US, Canadian, Australian models)
TV/LD
(EXCEPT US, Canadian, Australian models)
!¶ TAPE (DE935 MODEL)
!• MD/DAT (DE935 MODEL)
MD/TAPE (EXCEPT DE935)
!ª CD
@º PHONO
@¡ MONITOR
1. When the front panel is removed, the VR board is removed at the
same time. Consequently the LEDs cannot be turned on and the
sound volume cannot be increased or decreased from the remote
control.
2. When servicing the DIGIT AL board, be sure to connect the earth
land of the DIGITAL board with the chassis frame so that the
earth potential of the DIGITAL board must not be floated from
the chassis frame.
SECTION 3
8
FLUORESCENT INDICATOR TUBE TEST MODE
* All fluorescent segments are tested. When this test is activated,
all segments turn on at the same time, then each segment turns on
one after another.
* Procedure:
While depressing the ENTER, the LEVEL and the EQ buttons
simultaneously, press the power [1/u] button to turn on the main
power. All segments turn on at the same time, then each segment
90
turns on press the ENTER button.
FACTORY SET MODE
* All preset contents are reset to the default setting.
* Procedure:
While depressing the SET UP, the LEVEL and the ENTER buttons
simultaneously, press the power [1/u] button to turn on the main
power. The message Factry Set appears and the present contents
are reset to the default values.
ALL CLEAR MODE
* All preset contents are cleared when this mode is activated. Use
this mode before returning the product to clients upon completion
of repair.
* Procedure:
While depressing the SET UP button simultaneously, press the
power [1/u] button to turn on the main power. The machine enters
the DEMO mode.DEMO mode: Wait a while, then the
demonstration starts. If the power [1/u] button is pressed often
the demonstration has started, the power is turned off, and the
demonstration resumes if the power [1/u] button is pressed again.
ALL CLEAR mode; If the power [1/u] button is pressed often
the machine enters the DEMO mode, but before the demonstration
starts, the display is turned off. Press [1/u] again. No response is
returned. The press [1/u] again. The preset data is cleared and
the machine enters the normal power-on state.
TEST MODE
AM CHANNEL STEP 9 kHz/10 kHz
SELECTION MODE (US,Canadian Model)
* Either the 9 kHz step or 10 kHz step can be selected for the AM
channel step.
* Procedure:
Set the FUNCTION to AM. Turn off the main power.
While depressing the TUNING+ button or the PRESET TUNING
+ button, press the power [1/u] button to turn on the main power.
Either the message AM 9kHz Step or AM 10kHz Step appears.
Select the desired step.
DSP TEST MODE
* It tests whether the DSP works correctly or not. When the DSP
test is activated, the test data is output from the DSP (IC1401:
CXD2712R) of the DIGITAL board and is written in the RAM
(IC1402: IDT71V016S). When the test data is read from the RAM
by the DSP, the data output must be equivalent to the original
data. If they disagree, an error is triggered. Errors can be caused
by the broken data line or defective soldering.
* Procedure
While pressing the SETUP, LEVEL and SUR buttons, press the
POWER button to enter the DSP test mode. The message DSP
TEST MODE appears. When an error occurs, the message DSP2
ERROR is displayed. When there is no error, the message DSP2
NO ERROR appears and the 1 kHz signal is output to all channels.
Then, the mode can be switched the (SIGN W AVE) (THROUGH)
and (INPULSE) mode.
VERSION MODE
* When this mode is used, the microprocessor version number is
displayed.
* Procedure:
Press the POWER button while pressing the ENTER, LEVEL,
and SUR buttons to turn on the power. The microprocessor version
number appears as follows.
SOUND FIELD CLEAR MODE
* The preset sound field is cleared when this mode is activated.
Use this mode before returning the product to clients upon
completion of repair.
* Procedure:
While depressing the SOUND FIELD MODE button, press the
power [1/u] button to turn on the main power. The message S.F
Initialize appears and initialization is performed.
— 5 — — 6 —
STR-DE835/DE935/SE591/V828
4-1. BLOCK DIAGRAM MAIN SECTION
SECTION 4
DIAGRAMS
DE935 MODEL
MD/TAPE
EXCEPT DE935 MODEL
DE935 MODEL
US,Canadian
Australian
MODEL
TV/DBS
DVD/LD
DAT/MD
TAPE
DE935 MODEL
MONITOR
VIDEO 1
VIDEO 2
TV/LD
DVD
EXCEPT US,Canadian
Australian
MODEL
PHONO
INPUT
DVD/LD
TV/SAT
DAT/MD
(INPUT)
MD/DAT
(REC OUT)
COAXIAL
DVD
AUDIOVIDEO 3
OUTPUT
INPUT
OUTPUT
INPUT
OUTPUT
INPUT
INPUT
J253
DVD
J252
VIDEO 1
INPUT
FM
75Ω
AM
L
LCD
LINPUT
LOUTPUT
L
LOUTPUT
L
TM301
ANTENNA
J301
J302
IC001
IR LINK
DET
IC002
IR LINK
DET
IC003
IR LINK
DET
IC004
IR LINK
DET
J001
J299
J201
J202
J203
Y
C
Y
C
TUNER UNIT
FM
AM
J303
STEREO
TUNED
T. MUTE
DO
4 14 15 13 2 3 1
DO
STEREO
TUNED
MUTING
IC007
VIDEO SELECT
IC201
1
M OUT
13
V1 IN
15
V1 OUT
9
V2 IN
11
V2 OUT
3
TV
5
LD
Y SWITCH
IC252
V1 O
5
13
V1 I
C SWITCH
IC251
V1 O1315
5
LD
V1 I
16
ANT LEVEL
DATA
S DATA
S CLK
M O
R CH
MUTE
Q1502
MUTE
Q1506
MUTE
Q1505
MUTE
Q1504
D1201
DE935 MODEL
J306
IC1510
IC1508
IC1508
IC1509
2ND
L
AUDIO
OUT
R
DATA
CLK
LAT
• RCH is omitted
• Signal Path
: FM
: PHONO
: CD
: DVD
AC MUTE
PROTECTOR
HP RY
SP/A RY
SP/B RY
RY CENTER
RY WOOFER
REAR SP RY
U DATA
U CLOCK
U MREQ
U SREQ
U REST
RESET
RY POWER
STOP
SOT0
SIN1
MD2
MD0
L
C
W
B
SL
C
D
SELECTOR
IC330
26
COM
TUNER
CD
MD
TAPE
S DATA
S DATA
47
S CLK
S CLK
48
EV DATA
COM
COM
161415
S LAT
DVD/LD
VIDEO2
VIDEO1
S LAT
EV CLK46EV STB
23
20
17
INPUT
INPUT
OUTPUT
112
110CL111CE115
DI
6
L OUT
10
R OUT
12
R CH
CE
CLK
S LAT
EQ AMP
IC302
5
7
4
SELECT
6
SWITCH
3
10
IC1005
4
11
12
14
A
2
9
B
VCC
16
IC202
VEE
8
SW1
14
SW2
10
SW3
4
SW4
6
-5V
3 2
REG
ANT LEVEL
A
AUDIO SELECT
IC301
4
3
2
8
7
6
11
10
CONTROL
CLK
14DI15
S DATA
S CLK
IC1006
A
B
+5V
DO
TMUTE
TUNED
58
59
DATA
STEREO
60
AUTO STOP
-15V
VIDEO(SW1)77
VIDEO(SW2)76
75
VIDEO(SW3)
72
VIDEO(SW4)
84
STEREO
TUNER MUTE
S LAT
S CLK
S DATA
56
57
DATA
CLOCK55LATCH
27
25
23
5
9
12
CE
16
S LAT
A
B
108
107
DIG IN A
DIG IN B
D201
SW5
2
15
14SW1
10SW2
4SW3
6SW4
1LDM O
14SW1
10SW2
4SW3
6SW4
1
Y
VIDEO 1
OUTPUT
C
Y
J251
MONITOR
OUTPUT
C
LTV/ SAT
L
LOUTPUT
LINPUT
L
LINPUT
BY SYNC
IC309
J305
J304
DIGITAL AUDIO
3
D IN
36
DI
38
CLK
37
CE
33
BP SYNC
I/F RECEIVER
IC1101
CK OUT
12.288M
ERROR
CSFLAG
XMODE
48
25
109
117
118
XMODE
CSFLAG
17
DATA
LRCK
AUTO
Q301
RY301
RELAY
DRIVE
SELECTOR
IC1502
19
SELECTOR
IC303
27
26
25
24
22
21
16
13
BCK
14
15
22
34
DO
35
32
XSTATE
Q1102
XSTATE
CONTROL
S DATA
116
AUTO
CLK
14DI15
S CLK
IC11404
113
DO
23
20
17
CE
16
S LAT
IC1404
IC1404
X3501
12.288MHz
Q1204
Q1203
D1203
D1202
106
ANALOG/DIG
85
S MUTE
S MUTE
SYSTEM
CONTROL
114
ERROR
DIGITAL AUDIO DECODER
84
SDIA0
85
SDIA1
83
SDBCK0
82
SDWCK0
8
XI
SCK
69
1
SCCLK
IC201
DOLBY
IC1301
AUDATA0
AUDATA1
AUDATA2
SI
68CS66IC62
2SI4CS5
IC1403
24
IC1403
23
IC1403
22
SO
67
3
IC
SO
IC1403
IC1403
SRAM
IC1402
D0-7
24 17
HD0 HD7
IC304
D0-7
J1002
5.1 INPUT
IC1507
IC1505
IC1505
IC1506
Q1507
MUTE
CONT
RY FRONT A
RY FRONT B
RY WOOFER
L
LS
C
W
AC MUTE
PROTECT
RY HP
RY CENTER
RY REAR
DISP DATA
DISP CLK
DISP MR
SREQ
SOTO
SINO
MD2
MD0
82
66
104
99
100
101
103
102
50
52
49
51
90RESET
105RY POWER
67STOP
10
9
87
89
AUDIO CODEC
HRDY
X1401
10MHz
15
SOD
30
29
9
39
4
5
6
7
8
Q1202
LIN+
LINSDTO
MCLK1
BCLK
LRCK
SDTI 1
SDTI 2
SDTI 3
CDTO
44
30
CDTI
IC1503
43
31
CDTI
42CS41PD17
29
CDTO
CCLK
CCLK
28CS32
L OUT1
L OUT3
R OUT3
L OUT2
27
23
24
25
DFS
11
35
PD
96kHZ
IC1504 IC1504
AUDIO DSP
IC1401
113
BCK0
SOA
14
16
XHDCS
XHDCS
CLKO
HRDY
SOB
SOC
CLKI
SOD
26
IC1202
26
XI
X1201
16MHz
XRST
XRST
2
3
4
99
100
5
13
Q1201
27
92XO93
114
BCK1
115
LRCK0
116
LRCK1
117
SIA
118
SIB
119
SIC
D0-7
A0-7
74
XWE
70
XOE
16
20
HD0
.
23
HD7
25
15
HA0
XHDWR
9
IC1202
13
25
HA0
XHDWR
2CH L
20
L OUT
S.1-L
23
S.1-LS
26
S.1-C
3
S.1-C
21
L
27
C
2
W
24
LS
17
C OUT
25
W OUT
4
22LS OUT
161415
S DATA
S CLK
S LAT
— 7 — — 8 —
STR-DE835/DE935/SE591/V828
4-2. BLOCK DIAGRAM POWER SECTION
VOLUME
US,Canadian MODEL
J258
TV/SAT
CONTL S
STATUS IN
J257
MONITOR
CONTROL S
IN
VIDEO 1
CONTL S
OUT
DVD/LD
CONTL S
OUT
16
B
J255
J256
DATA
RV401
L
C
W
SL
CLK
LAT
IC408
IC410
IC410
IC409
M
Q120
LED
DRIVE
AC MUTE
PROTECTOR
RY HP
SP/A RY
C
SP/B RY
RY CENTER
RY WOOFER
RY REAR
RY POWER
STOP
RESET
URESET
USREQ
UMREQ
UCLOCK
D
UDATA
SOTO
SIN1
MD2
MD0
RDS DATA
RDS CLK
A
ANT LEVEL
IC105
2
MOTOR
DRIVE
4
Q251,252
SWITCH
3
Q254
2
IC254
IC254
5
6
Q255,256
LEVEL
CONTROL
Q257,258
LEVEL
CONTROL
LEVEL
CONTROL
DATA
CLK
LAT
DATA
CLK
LAT
DATA
CLK
LAT
BUFFER
Q253
1
7
5
8
VOL CONT
14
IN
9
DATA
8
CLK
10
LAT
VOL CONT
3
IN
IN1415
9
DATA
8
CLK
10
LAT
VOL CONT
14
IN
9
DATA
8
CLK
10
LAT
9
11
IC414
IC416
IC415
54
53
46
55
56
ST-I/O
IC253
OUT
OUT
OUT
OUT
RDS DATA
RDS CLK
RDS SIGNAL
6
VOLUME
UP
DOWN
15
2
15
MUTE
Q501,503
6
4
MBUS TV
95
MBUS STA OUT
93
96
+VDD
-VDD
+VDD
-VDD
+VDD
-VDD
49
51
20
MD0
MD2
MBUS DVD
MBUS VIDEO 1
94
POWER AMP(L)
13 VCC
VCC
14
15
VEE
6
IN
1
MUT
POWER AMP(C/W)
13 VCC
14 VCC
15
VEE
IN
8
1 MUT
IN
6
POWER AMP(SL)
13 VCC
VCC
14
VEE
15
IN
6
MUT
1
19
SINO
SOTO
AD KEY1
38
FUNCTION
KEY
S101,104,107
S140-144
61
IC501
IC601
IC701
62
UDATA
+VE
NF
-VE
+VE
NF
-VE
+VE
NF
-VE
60
58
UMREQ
UCLOCK
FUNCTION
S102,105,108
S110-114
2
5
3
12
9
11
2+VE
3-VE
2
5
3
URESET
39
KEY
59
AD KEY2
Q504, Q505
BIAS
Q604, Q605
BIAS
Q704, Q705
BIAS
USREQ
FUNCTION
S103,106,109
S115-119
40
KEY
AD KEY3
BOOSTER
BOOSTER
BOOSTER
BOOSTER
BOOSTER
BOOSTER
RV101
75
JOG UP
Q506
Q507
Q606
Q607
Q706
Q707
76
JOG DOWN
41
FUNCTION
KEY
S120-126
CUR DET
Q598
CUR DET
Q698
CUR DET
Q798
PROTECTOR
Q547-549
D100,101,104-106
2EQ1
5
4
3
B.B
D.D
DCS
MUTE
MODE CONTROL
IC102
AD KEY4
AD KEY5
43
FUNCTION
KEY
S127-133 S134-139 S151
44
FUNCTION
KEY
AD KEY6
FUNCTION
S145-149
AF DETECTOR
Q509,510
AF DETECTOR
Q609,610
AF DETECTOR
Q709,710
D151,152
D154-170
..
915 20 2917
LED DRIVER
88
LED DATA
AD KEY7
44
KEY
IC106
87
LED CLK
89
19181716
90
LED CE
LED CLR
SP A
64
SPEAKER
SWITCH
Q511
Q611
65
SP B
R CH
RY602
RELAY
DRIVE
Q601
RY501
RELAY
DRIVE
Q546
RY502
RELAY
DRIVE
Q596
RY601
RELAY
DRIVE
Q645
RY681
RELAY
DRIVE
Q681
RY701
RELAY
DRIVE
Q745
DE935 MODEL
+B
QQ13,14
SIRCS
POWER KEY
66
S150
POWER
IC11
DET.
X101
16MHz
82
XO
FL CLK
FL LAT
FL CLEAR
21
24
25
26
34
LAT
CLK24CLR
DIN
FL DRIVE FL DRIVE
F2
FLOURESCENT
INDICATOR TUBE
IC12
SIRCS
CARR OUT
2
SIRCS IN
33
83
XI
4LS29
5CL30
CLK
3
29
DOUT
IC104IC103
FL101
X11
7.82MHz
16
15
XI
XO
CA1 I
CA1 O
RESET
LAT
14
5
99
98
LAT
RESET
FL DAT
ABUS OUT
82
67
DIN
F1
Q109
BUFFER
R CH
R CH
QQ11
CTL
11
12
I/O
7
POWER RY
63
SIRCS
URESET
RESET
STOP
ABUS A1 IN
I/O
26
58
77
47
J701
PHONES
L
A
JJ103
WOOFER
B
SURROUND
D1209
Q101
TM501
FRONT
SPEAKER
TM701
SPEAKER
+5V
+15V
-15V
+32V
+VDD
-VDD
DISP µCOM+5.6V
IC101
REMOTO
CONTROL
RECEIVER
RESET
Q108
1
DIGITAL +5V
CONT µCOM ETC
D1211
IC404
+5V
REG
Q801
+32V
REG
SWITCH
Q613
CODEC +5V
D1208
Q1205
IC1206
+6.2
REG
RESET
S801
IMPEDANCE
SELECTOR
84
3
IC401
+15V
1
3
REG
IC402
-15V
2
3
REG
RELAY
DRIVE
J204
S-LINK
F801
F802
D802-805
D806-809
RY901
Q901
T902
D801
+24V
IC1501
+5V
1
3
REG
IC1203
+3.3V
1
3
REG
IC1204
+5V
1
3
REG
IC1205
+6.2V
1
3
REG
3
6
D901-904
58
T901
F803
F804
F805
F2
F1
F901
JW927
JW928
EXCEPT E,PX
R
L
R
C
S(L)
S(R)
• RCH is omitted
• Signal Path
E,PX MODEL
F904
EXCEPT
US,Canadian
MODEL
F903
US,Canadian
MODEL
JW925
:FM
:CD
VS901
VOLTAGE
SELECTOR
240V
220V
120V
CNJ901
CNP901
AC IN
— 9 — — 10 —
STR-DE835/DE935/SE591/V828
R
4-3. CIRCUIT BOARD LOCATION
AC board
DC board
DISPLAY board
SP-SW board
H.P board
SW board
LED board
4/8 board
ROTARY board
V-SWITCH board
REAR-AMP board
SP board
MUTING board
VIDEO board
VOLUME board
S-VIDEO board
DIGITAL board
JOINT(H) board
MAIN board
TUNE
board
THIS NOTE IS COMMON FOR PRINTED WIRING
BOARDS AND SCHEMATIC DIAGRAMS.
(In addition to this necessary note is printed in each
block.)
For schematic diagrams.
Note:
• All capacitors are in µF unless otherwise noted. pF: µµF
50 WV or less are not indicated except for electrolytics
and tantalums.
• All resistors are in Ω and 1/
specified.
• % : indicates tolerance.
• 2 : nonflammable resistor.
• 1 : fusible resistor.
• C : panel designation.
Note:
The components identified by
mark ! or dotted line with mark
! are critical for safety.
Replace only with part number
specified.
• U : B+ Line.
• V : B– Line.
• H : adjustment for repair.
• Voltages and waveforms are dc with respect to ground
under no-signal (detuned) conditions.
No mark : FM
• Voltages are taken with a VOM (Input impedance 10 MΩ).
Voltage variations may be noted due to normal production
tolerances.
• Waveforms are taken with a oscilloscope.
• Circled numbers refer to waveforms.
• Signal path.
F : FM
J : CD
c : DIGITAL
I : PHONO
• Abbreviation
CND :Canadian model
AUS :Australian model
MY :Malaysia model
SP :Singapore model
CH :Chinese model
W or less unless otherwise
4
Note:
Les composants identifiés par
une marque ! sont critiques
pour la sécurité.
Ne les remplacer que par une
pièce portant le numéro spécifié.
For printed wiring boards.
Note:
• X : parts extracted from the component side.
• ® : Through hole.
• b : Pattern from the side which enables seeing.
• Wavef orm
DIGITAL Board
1 IC1201 (™ (XO)
4.0Vp-p
4MHz
2 IC1401 (CLKO)
100
3.5Vp-p
10MHz
3 IC1404 25
5.5Vp-p
12.288MHz
DISPLAY Board
4 IC102 *™ (XO)
3.6Vp-p
16.0MHz
— 11 — — 12 —
5 IC12 !§ (X OUT)
3.8Vp-p
7.28MHz
4-4. SCHEMATIC DIAGRAM DIGITAL SECTION(1/3) • See page 19 for Printed Wirig Board. • See page 12 for Waveforms. • See page 49 for IC Pin Functions. • See page 59 for IC Block Diagrams.
STR-DE835/DE935/SE591/V828
— 13 — — 14 —
STR-DE835/DE935/SE591/V828
4-5. SCHEMATIC DIAGRAM DIGITAL SECTION(2/3) • See page 19 for printed wirig board. • See page 12 for Waveforms. • See page 51 for IC Pin Functions. • See page 59 for IC Block Diagrams.
CXD9511Q
— 15 — — 16 —
4-6. SCHEMATIC DIAGRAM DIGITAL SECTION(3/3) • See page 19 for printed wirig board. • See page 54 for IC Pin Functions. • See page 59 for IC Block Diagrams.
STR-DE835/DE935/SE591/V828
— 17 — — 18 —
STR-DE835/DE935/SE591/V828
4-7. PRINTED WIRING BOARD DIGITAL SECTION(1/2) • See page 11 for circuit board location.
A
B
C
D
12
34567891011121314
E
F
G
H
• Semiconductor Location
Ref. No. Location Ref. No. Location
D1001 E-2
D1101 C-3
D1102 C-6
D1208 A-9
D1209 D-12
D1211 A-9
D1501 F-11
D1504 G-11
D1505 H-11
IC1005 D-2
IC1007 E-2
IC1101 C-2
IC1102 C-6
IC1201 C-7
IC1202 F-6
IC1301 C-4
IC1401 F-5
IC1402 F-3
IC1403 E-3
IC1404 D-3
IC1502 G-10
Ref. No. Location
IC1503 F-8
IC1504 F-10
IC1505 G-7
IC1506 G-8
IC1507 G-9
IC1508 G-12
IC1509 F-12
IC1510 E-12
IC1554 E-10
Q1201 E-6
Ref. No. Location
Q1202 E-6
Q1501 E-11
Q1502 F-11
Q1503 F-11
Q1504 G-11
Q1505 G-11
Q1506 H-11
Q1507 E-11
— 19 — — 20 —
4-8. PRINTED WIRING BOARD DIGITAL SECTION(2/2) • See page 11 for circuit board location.
STR-DE835/DE935/SE591/V828
A
B
C
D
12
(Page 44)
(Page 23)
345678910111213
DISPLAY BOARD
39
US,CND,
EXCEPT
AUS
US,CND,
MODEL
AUS
MODEL
935 MODEL
(Page 36) (Page 24)
935 MODEL
(Page 35)
E
(Page 36)
F
40
G
H
• Semiconductor Location
Ref. No. Location Ref. No. Location
D1002 C-12
D1201 C-7
D1202 B-8
D1203 B-9
D1204 C-2
D1205 C-2
D1206 C-4
D1207 C-4
D1210 B-10
IC1001 D-13
IC1002 C-13
IC1003 B-13
IC1004 B-13
IC1006 C-12
IC1203 A-3
IC1204 A-3
IC1205 C-4
IC1206 D-5
IC1501 C-5
Q1203 B-9
Q1204 C-8
Q1205 C-3
US,CND,
AUS
MODEL
EXCEPT
US,CND,
AUS
MODEL
43
— 21 — — 22 —
STR-DE835/DE935/SE591/V828
4-9. PRINTED WIRING BOARD DISPLAY SECTION • See page 11 for circuit board location.
A
B
C
D
12
27
34567891011121314
21
(PAGE 22)
(PAGE 28)
(PAGE 40)
Z
SW BOARD
(PAGE 27)
E
F
• Semiconductor
Location
Ref. No. Location
D102 A-4
D103 B-4
D104 B-3
D105 C-3
D106 C-2
D107 B-13
D109 D-6
D112 D-7
D113 D-6
D114 D-6
D115 D-7
D116 D-7
D180 D-6
DD11 D-12
DD12 B-11
DD14 B-11
DD15 B-11
DD16 C-10
Ref. No. Location
IC11 D-11
IC12 D-12
IC101 C-4
IC102 E-8
IC103 C-7
IC104 B-6
IC105 B-2
Q101 C-4
Q102 E-9
Q108 D-9
Q109 D-6
QQ1 C-2
QQ11 D-12
QQ13 B-11
QQ14 B-11
27
28
— 23 — — 24 —
4-10. SCHEMATIC DIAGRAM DISPLAY SECTION • See page 12 for Waveforms. • See page 56 for IC Pin Functions. • See page 61 for IC Block Diagrams.
STR-DE835/DE935/SE591/V828
Z
R193 1K
R194 1K
D118 1SS352
C102
0.22
R115 680K
— 25 — — 26 —
STR-DE835/DE935/SE591/V828
4-11. PRINTED WIRING BOARD SURROUND SECTION • See page 11 for circuit board location.
A
B
C
D
12
34567891011121314
E
F
G
H
(Page 23)
Z
(Page 23)
(Page 23)
(Page 28)
• Semiconductor
Location
Ref. No. Location
D101 I-4
D120 G-11
(Page 24)
I
16
D121 G-11
D151 B-4
D152 C-5
D154 A-6
D155 C-9
D156 A-4
D157 B-1
D158 D-4
D159 B-6
D160 C-6
D161 C-7
D162 C-8
D163 C-10
D164 B-10
D165 B-9
D166 B-8
D167 B-7
D168 B-6
D169 C-1
D170 A-5
— 27 — — 28 —
4-12. SCHEMATIC DIAGRAM SURROUND SECTION
STR-DE835/DE935/SE591/V828
Z
26
— 29 — — 30 —
STR-DE835/DE935/SE591/V828
4-13. PRINTED WIRING BOARD REAR AMP SECTION • See page 11 for circuit board location.
12
A
B
C
D
E
3456789101112
(PAGE 43)
(PAGE 43)
• Semiconductor
Location
Ref. No. Location
D701 H-9
D702 H-10
D703 H-10
D704 H-10
D705 F-3
D706 F-4
D749 F-9
D751 G-2
D752 H-2
D753 H-2
D754 H-3
D798 F-11
D799 F-3
IC701 G-6
Q704 G-10
Q705 H-10
Q706 H-9
Q707 H-11
Q708 G-11
Q709 F-3
Q710 F-4
Q754 G-3
Q755 H-3
Q756 H-2
Q757 H-4
Q758 G-4
Q798 F-11
Q799 G-4
F
G
H
(PAGE 44) (PAGE 43)
16
(PAGE 44)
I
— 31 — — 32 —
4-14. SCHEMATIC DIAGRAM REAR AMP SECTION • See page 58 for IC Block Diagrams.
STR-DE835/DE935/SE591/V828
510
510
The components identified by
mark ! or dotted line with mark
! are critical for safety.
Replace only with part number
specified.
— 33 — — 34 —
Les composants identifiés par
une marque ! sont critiques
pour la sécurité.
Ne les remplacer que par une
pièce portant le numéro spécifié.
Loading...