Sony STRDH790 User Manual

Multi Channel

Connection and Preparation

AV Receiver

Operating Instructions

Playback

Menu/Other Functions

Troubleshooting/ Specifications

STR-DH790

For the customers in the USA

Owner’s Record

The model and serial numbers are located on the rear of the receiver. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product.

Model No. ST R -D H7 9 0

Serial No.

WARNING

To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

To reduce the risk of fire, do not cover the ventilation opening of the appliance with newspapers, tablecloths, curtains, etc. Do not expose the appliance to naked flame sources (for example, lighted candles).

To reduce the risk of fire or electric shock, do not expose this appliance to dripping or splashing, and do not place objects filled with liquids, such as vases, on the appliance.

Do not install the appliance in a confined space, such as a bookcase or built-in cabinet.

As the main plug is used to disconnect the unit from the mains, connect the unit to an easily accessible AC outlet. Should you notice an abnormality in the unit, disconnect the main plug from the AC outlet immediately.

The unit is not disconnected from the mains as long as it is connected to the AC outlet, even if the unit itself has been turned off.

CAUTION

Risk of explosion if the battery is replaced by an incorrect type. Do not expose batteries or appliances with battery-installed to excessive heat, such as sunshine and fire.

CAUTION

HOT SURFACE

To reduce the risk of thermal burn hazard, do not touch the hot surface where this symbol is displayed.

FOR UNITED STATES CUSTOMERS. NOT APPLICABLE IN CANADA, INCLUDING IN THE PROVINCE OF QUEBEC.

POUR LES CONSOMMATEURS AUX ÉTATS-UNIS. NON APPLICABLE AU CANADA, Y COMPRIS LA PROVINCE DE QUÉBEC.

For the customers in the USA

This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

Important Safety Instructions

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11) Only use attachments/accessories specified by the manufacturer.

12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long periods of time.

14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

 Reorient or relocate the receiving antenna.  Increase the separation between the

equipment and receiver.

 Connect the equipment into an outlet on a

circuit different from that to which the receiver is connected.

 Consult the dealer or an experienced radio/

TV technician for help.

CAUTION

You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.

Properly shielded and grounded cables and connectors must be used for connection to host computers and/or peripherals in order to meet FCC emission limits.

To reduce the risk of electric shock, the speaker cable should be connected to the apparatus and the speakers in accordance with the following instructions.

1) Disconnect the AC power cord from the MAINS.

2) Strip 10 to 15 mm of the wire insulation of the speaker cable.

3) Connect the speaker cable to the apparatus and the speakers carefully so as not to touch the core of speaker cable by hand. Also disconnect the AC power cord from the MAINS before disconnecting the speaker cable from the apparatus and the speakers.

This equipment must not be co-located or operated in conjunction with any other antenna or transmitter.

For the customers in Canada

Properly shielded and grounded cables and connectors must be used for connection to host computers and/or peripherals.

This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device.

For the customers in the USA and Canada

This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment should be installed and operated keeping the radiator at least 20 cm or more away from person’s body.

For the customers in Australia

Disposal of old electrical & electronic equipment (applicable in the European Union and other countries with separate collection systems)

For the customers in Europe

Disposal of waste batteries and electrical and electronic equipment (applicable in the European Union and other countries with separate collection systems)

This symbol on the product, the battery or on the packaging indicates that the product and the battery shall not be treated as household waste. On certain batteries this symbol might be used in combination with a chemical symbol. The chemical symbol for lead (Pb) is added if the battery contains more than

0.004% lead. By ensuring that these products and batteries are disposed of correctly, you will help to prevent potentially negative consequences for the environment and human health which could be caused by inappropriate waste handling. The recycling of the materials will help to conserve natural resources. In case of products that for safety, performance or data integrity reasons require a permanent connection with an incorporated battery, this battery should be replaced by qualified service staff only. To ensure that the battery and the electrical and electronic equipment will be treated properly, hand over these products at end-of-life to the appropriate collection point for the recycling of electrical and electronic equipment. For all other batteries, please view the section on how to remove the battery from the product safely. Hand the battery over to the appropriate collection point for the recycling of waste batteries. For more detailed information about recycling of this product or battery, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product or battery.

Notice for customers: the following information is only applicable to equipment sold in countries applying EU directives

This product has been manufactured by or on behalf of Sony Corporation. EU Importer: Sony Europe Limited. Inquiries to the EU Importer or related to product compliance in Europe should be sent to the manufacturer’s authorized representative, Sony Belgium, bijkantoor van Sony Europe Limited, Da Vincilaan 7-D1, 1935 Zaventem, Belgium.

Hereby, Sony Corporation declares that this equipment is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.compliance.sony.de/

This radio equipment is intended to be used with the approved version(s) of software that are indicated in the EU Declaration of Conformity. The software loaded on this radio equipment is verified to comply with the essential requirements of the Directive 2014/53/EU. You can check the software version by pressing AMP MENU, then select “<SYSTEM>” using / and .

This Multi Channel AV Receiver is intended for sound and video playback from connected devices, music streaming from a BLUETOOTH® device, and FM tuner.

This equipment has been tested and found to comply with the limits set out in the EMC regulation using a connection cable shorter than 3 meters.

Excessive sound pressure from earphones and headphones can cause hearing loss.

Table of Contents

Supplied Items .......................................... 6

Main Features of the Receiver .................. 7

Parts and Controls .................................... 8

Connection and Preparation

1: Deciding on the Speaker System .........14

2: Setting/Connecting Speakers .............16

3: Connecting a TV .................................. 24

4: Connecting Audio-Visual Devices ...... 29

5: Connecting the FM Antenna (aerial) ...31

6: Turning on the Receiver and

Performing Easy Setup .......................31

7: Setting for HDMI .................................. 35

Playback

Playing Back Sound and Images on

Connected TV and/or Audio-Visual

Devices ............................................... 36

Playing Back Sound on a BLUETOOTH

Device ................................................ 37

Selecting Sound Effects .......................... 39

Troubleshooting/ Specifications

Troubleshooting ......................................47

Precautions ............................................. 54

Specifications ..........................................55

On Copyrights .......................................... 57

On BLUETOOTH Communication ............ 57

Supported Playable Formats ...................59

Index ....................................................... 60

Menu/Other Functions

Operating Menu on the TV Screen ......... 43

Selecting the speaker pattern ................ 44

Switching the front speakers .................. 46

Reverting to the Factory Default

Settings .............................................. 46

Supplied Items

•Receiver (1)

• Remote control (1)

• R03 (size AAA) batteries (2)

• FM wire antenna (aerial) (1)

• Calibration microphone (1)

•Startup Guide (1)

• The text enclosed in bracket ([--]) appears on

the TV screen, and the text enclosed in double quotation mark (“--”) appears on the display panel.

•The items displayed on the TV screen may

vary depending on the area.

The Help Guide (web-based online operating instructions) provides information on advanced functions and operations.

You can view the Help Guide on your computer as well as a smartphone or tablet. Open your Web browser and enter the following URL or use the QR code reader function to access the site.

For the customers in Europe

Explains how to connect the 5.1.2-channel speaker system, perform initial settings and listen to connected devices.

• Operating Instructions (this booklet) (1)

Explains necessary connections, initial settings, and basic operations.

About manuals provided for this product

•Some illustrations are presented as conceptual drawings, and may be different from the actual products.

•The manuals provided for this product mainly describe the procedures for using the remote control. You can also use the controls on the receiver if they have the same or similar names as those on the remote control.

http://rd1.sony.net/help/ha/ strdh79/h_eu/

For the customers in Taiwan

http://rd1.sony.net/help/ha/ strdh79/zh-tw/

For the customers in other areas

http://rd1.sony.net/help/ha/ strdh79/h_zz/

Main Features of the Receiver

Compatible with the latest object-based audio formats

Dolby TrueHD, DTS-HD Master Audio, and the object-based audio formats (Dolby Atmos and DTS:X) are supported (only when devices are connected via HDMI cables). You can experience surround sound for 360 degrees.

Compatible with high quality 4K video formats*

• The receiver supports HDCP 2.2, Dolby Vision, HDR10 and Hybrid Log-Gamma, letting you

enjoy high quality video images (page 24).

* You need to change the setting of “SIG. FMT.” depending on the input video signal.

Equipped with an Auto Calibration function (Advanced D.C.A.C.) that makes your viewing and listening environment close to ideal

• Advanced D.C.A.C. measures and calibrates the distance, level, and frequency

characteristics of the speakers using the supplied monaural calibration microphone to fit your viewing and listening environment (page 32).

• The Automatic Phase Matching (A.P.M.) function calibrates the phase characteristics of the

speakers so that you can experience well-matched surround sound.

Reproduces a virtual surround sound even in an environment where the back speaker cannot be installed (Front Surround)

Allows you to enjoy surround sound equivalent to that of a 5.1-channel speaker system with only two front speakers (page 23).

Compatible with BLUETOOTH® wireless technology

• Connect a WALKMAN®, smartphone, or tablet to the receiver via the BLUETOOTH function

to play music content on those devices wirelessly (page 37).

• You can turn on this receiver from a paired BLUETOOTH device even when the receiver is

in standby mode. For details on operation, visit the Help Guide.

Sound fields selectable by preference

You can select from a variety of sound fields according to speaker connections or input sources (2ch Stereo, Direct, Auto Format Decoding, etc.) (page 39).

Equipped with an Audio Return Channel (ARC)-compatible HDMI jack

TV sound can be output from the receiver using only one HDMI cable (page 25, 26, 27).

Supports bi-amplifier connection of front speakers

You can enhance the sound quality of the front speakers by connecting different amplifiers to the tweeter and woofer using a bi-amplifier connection (page 22).

Parts and Controls

Receiver front panel

 (power)

Turns the receiver on or sets it to the standby mode.

 Power indicator

•Green: The receiver is turned on.

•Red: The receiver is in standby mode,

and you have set one of the following: – “CTRL.HDMI” is set to “CTRL ON”. – “BT STBY” is set to “STBY ON”.* – “STBY.THRU” is set to “ON” or

“AUTO”.

•The indicator goes off: The receiver is

in standby mode and: – “CTRL.HDMI” is set to “CTRL OFF”. – “BT STBY” is set to “STBY OFF”. – “STBY.THRU” is set to “OFF”.

* The indicator lights up in red only if a device

has been paired with the receiver and “BT POWER” is set to “BT ON”. If no devices are paired with the receiver or “BT POWER” is set to “BT OFF”, the indicator turns off.

 SPEAKERS (page 46)

Switches the speaker system.

Note

No sound is output from the speakers when you select “OFF SP EAKERS”. Be sure to select setting other than “OFF SPEAKERS”.

 TUNING MODE

Selects auto tuning or preset tuning mode.

 TUNING +/–

Scans a FM station or selects preset stations/channels.

 2CH/MULTI, MOVIE, MUSIC

(page 39)

 Display panel (page 10)  NIGHT MODE

Activates the Night Mode function which allows you to retain a theaterlike environment at low volume levels.

Note

• The Night Mode function does not work in the following cases:

– [Pure Direct] is set to [On].

– Headphones are connected. – [Direct] is being used and an analog input

is selected.

• The receiver may play signals at a lower sampling frequency than the actual sampling frequency of the input signals, depending on the audio format.

 DISPLAY

Displays information on the display panel.

 DIMMER

Adjusts the brightness of the display panel.

 BLUETOOTH

Switches the input of the receiver to [BT] and automatically connects to the last connected device. Sets the receiver to pairing mode when there is no pairing information on the receiver. Disconnects the BLUETOOTH device when the receiver is connected to a BLUETOOTH device.

BLUETOOTH indicator (page 37)

 Remote control sensor

Receives signals from remote control.

 PURE DIRECT

Activates the Pure Direct function which allows you to enjoy higherfidelity sound from all inputs. The indicator above the button lights up when the Pure Direct function is activated.

Note

[Calibration Type], [Night Mode], [Equalizer], “A.P.M.”, and “D.RANGE” do not work when the Pure Direct function is selected.

 MASTER VOLUME (page 36)  INPUT SELECTOR

Selects the input channel connected to the device you want to use.

 CALIBRATION MIC jack (page 33)  PHONES jack

Connect headphones here.

Indicators on the display panel

 Speaker system indicator

(page 46)

 Input indicator

Lights up to indicate the current input.

OPT

Digital signals are input through the OPTICAL jack.

COAX

Digital signals are input through the COAXIAL jack.

HDMI

Digital signals are input through the selected HDMI jack.

 SLEEP

Lights up when the sleep timer is activated.

 Tuning indicator

Lights up when the receiver tunes to a radio station.

MEMORY

A memory function, such as Preset Memory, etc., is activated.

RDS (European and Asia-Pacific models only)

Tuned to a station with RDS services.

MONO

Monaural broadcast

FM stereo broadcast

Preset station number (The number will change according to the preset station you select.)

 D.RANGE

Lights up when dynamic range compression is activated.

Receiver rear panel

 POWER SUPPLY port

For power supply only.

 HDMI IN/OUT jacks (page 24, 25,

26, 27, 28, 29)

All of the HDMI IN/OUT jacks on the receiver support HDCP 2.2. HDCP 2.2 is newly enhanced copyright protection technology that is used to protect content such as 4K movies.

 SPEAKERS terminals (page 16, 17,

18, 19, 20, 21, 22, 23)

 SUBWOOFER OUT jacks (page 17,

18, 19, 20, 21, 22, 23)

 AUDIO IN jacks (page 28, 30)  FM ANTENNA terminal (page 31)  OPTICAL IN jack (page 26, 28)  COAXIAL IN jack (page 30)

Remote control

 (power) (page 32)

Turns the receiver on or sets it to the standby mode.

INFORMATION

Displays information such as audio format, etc. on the TV screen.

SLEEP

Sets the receiver to turn off automatically at a specified time.

 Input buttons

BLUETOOTH, MEDIA BOX, BD/DVD, SAT/CATV, GAME, SA-CD/CD, TV, FM

Selects the input channel connected to the device you want to use. When you press any of the input buttons, the receiver turns on.

Note

When you press BLUETOOTH, the receiver turns on only if “BT POWER” is set to “BT ON” in the “<BT>” menu.

BLUETOOTH PAIRING (page 37)

Switches the input of the receiver to [BT] and sets the receiver to the pairing mode.

 2CH/MULTI, MOVIE, MUSIC

(page 39)

Selects a sound field.

PURE DIRECT

Activates the Pure Direct function which allows you to enjoy higherfidelity sound from all inputs.

Note

[Calibration Type], [Night Mode], [Equalizer], “A.P.M.”, and “D.RANGE” do not work when the Pure Direct function is selected.

FRONT SURROUND

Activates the Front Surround function which allows you to enjoy theater-like surround sound only with two front speakers.

NIGHT MODE

Activates the Night Mode function which allows you to retain a theaterlike environment at low volume levels.

Note

• The Night Mode function does not work in the following cases:

– [Pure Direct] is set to [On]. – Headphones are connected. – [Direct] is bei ng used and an analog input

is selected.

• The receiver may play signals at a lower sampling frequency than the actual sampling frequency of the input signals, depending on the audio format.

DIMMER

Adjusts the brightness of the display panel.

 DISPLAY

Displays information on the display panel.

AMP MENU

Displays the menu on the display panel to operate the receiver.

(enter), / / /

Press , , , to select the menu items. Then, press to enter the selection.

BACK

Returns to the previous menu or exits a menu or on-screen guide that is displayed on the TV screen.

OPTIONS (page 43)

Displays the options menu on the TV screen.

HOME (page 43)

Displays the home menu on the TV screen.

  (volume) +*/–

Adjusts the volume level of all speakers at the same time.

 (muting)

Turns off the sound temporarily. Press the button again to restore the sound.

/ (fast rewind/fast forward),  (play/pause)*,

/ (previous/next),  (stop) (page 38)

Note

• The above explanation is intended to serve as examples.

• Depending on the model of your connected device, some functions explained in this section may not work with the supplied remote control.

To insert batteries into the remote control

Insert two R03 (size AAA) batteries (supplied) in the remote control. Make sure that the + and – ends are in the correct position when installing batteries.

Note

• Do not leave the remote control in an extremely hot or humid place.

• Do not use a new battery with an old one.

• Do not mix manganese batteries and other kinds of batteries.

• We recommend that you use AAA manganese batteries.

• Do not expose the remote control sensor on the front panel of the receiver to direct sunlight or lights. Doing so may cause a malfunction.

• If you do not intend to use the remote control for an extended period of time, remove the batteries to avoid possible damage from battery leakage and corrosion.

• When the receiver no longer responds to the remote control, replace both of the batteries with new ones.

TUNING +/–

Scans a FM station.

MEMORY*

Stores a station that you are receiving as a preset station.

PRESET +/–

Selects preset stations or channels.

*The  +, , and MEMORY buttons have

tactile dots. Use the tactile dots as reference when operating the receiver.

Connection and Preparation

Room with the receiver installed Another location with

Front B speakers

1: Deciding on the Speaker System

Decide on the speaker system you want to set up according to the number of speakers and subwoofers that you are using. The illustration and table below indicate the types of speakers that can be connected to the receiver and the general positions for placing the speakers.

Abbreviations used in illustrations

FL Front left speaker

FR Front right speaker

CNT Center speaker Produces vocal sounds from center channel.

SL Surround left speaker

SR Surround right speaker

SBL

SBR

SB Surround back speaker Produces sounds from surround back channel.

SW Subwoofer

TML Top middle left speaker

TMR Top middle right speaker

FDL

FDR

Speaker type Function of each speaker

Produces sounds from front left/right channels.

Produces sounds from surround left/right channels.

Surround back left speaker

Surround back right speaker

Front Dolby Atmos enabled left speaker

Front Dolby Atmos enabled right speaker

Produces sounds from surround back left/right channels.

Produces LFE (low frequency effect) channel sounds and reinforces bass parts of other channels.

Produces sounds from top middle left/right channels.

Produces sounds from the top middle left/right channels and reflects these sounds off the ceiling. Enables playing back sounds of Dolby Atmos 3D movies without the need to install ceiling speakers.

Abbreviations used in illustrations

SDL

SDR

FHL Front high left speaker

FHR Front high right speaker

Tip

• When you connect only one surround back speaker (SB), place the surround back speaker directly behind the listening position.

• As the subwoofer (SW) does not emit highly directional signals, you can place it wherever you want.

Speaker type Function of each speaker

Surround Dolby Atmos enabled left speaker

Surround Dolby Atmos enabled right speaker

Produces sounds from the top middle left/right channels and reflects these sounds off the ceiling. Enables playing back sounds of Dolby Atmos 3D movies without the need to install ceiling speakers.

Produces sound from front height left/right channels.

Speaker systems described in this manual

This manual describes the installation, connection, and setting procedures using the typical speaker systems indicated in the table below as examples. To learn about all speaker systems supported by this receiver, see “Selecting the speaker pattern” (page 44).

Connection and Preparation

For setting/

Speaker system

 5.1-channel 17

 7.1-channel using surround

back speakers

 5.1.2-channel using top middle speakers

 5.1.2-channel using front Dolby Atmos enabled speakers

 5.1-channel with Front B speakers

 5.1-channel with Bi-Amplifier connection

 2.1-channel 23

connecting speakers, see page

[ASSIGN SURROUND BACK TERMINALS]

[Surround Back

Speakers/

Nothing]

[Surround Back

Speakers/

Nothing]

[Height

Speakers]

[Height

Speakers]

[Front B

Speakers]

[Bi-Amplifier

Speakers]

[Surround Back

Speakers/

Nothing]

[Speaker Pattern] “PATTERN”

[5.1ch]

“5.1”

[7.1ch]

“7.1”

[5.1.2ch]

“5.1.2”

[5.1.2ch]

“5.1.2”

[5.1ch]

“5.1”

[5.1ch]

“5.1”

[2.1ch]

“2.1”

[Front High/ Top /D olby Speakers] “HEIGHT”

–

[Top Middle

Speakers]

“TM”

[Front Dolby

Speakers]

“FD”

–

2: Setting/Connecting Speakers

10 mm

(13/32 in)

10 mm

(13/32 in)

Set up the speakers and subwoofers in a room using the layout you prefer for your speaker system and connect them to the receiver. The speaker layout drawings on page 17 and subsequent pages provide the ideal layout examples. You do not have to set up the speakers and subwoofers in exactly the same way as the layout examples. Adjust the speaker layout to optimally suit your room environment.

Note

• Connect speakers with a nominal impedance of 6 ohms to 16 ohms.

• Before connecting cables, be sure to disconnect the AC power cord (mains lead).

• Before connecting the AC power cord (mains lead), make sure that metallic wires of the speaker cables are not touching each other between the SPEAKERS terminals or on the receiver rear panel. If the wires are touching, it may result in damage to the amplifier circuit.

• When you connect a subwoofer with an auto standby function, turn off the function when watching movies. If the auto standby function is set to on, it turns to standby mode automatically based on the level of the input signal to the subwoofer, and the sound may not be output.

Tip

If you have one subwoofer, connect it to either of the SUBWOOFER OUT jacks. If you have two subwoofers, you can connect them to both SUBWOOFER OUT jacks.

How to connect speaker cables

Connect speaker cables with the polarities + (red)/– (black) matched between the receiver and the speakers as illustrated below. Strip the jacket to 10 mm (13/32 in) at each end of the speaker cables, and then tightly twist the speaker wire strands. Insert the stripped ends of the cables into the terminals.

Note

• Be sure not remove too much of the speaker cable sleeves, so as to prevent the wires of the speaker cables from touching each other.

• Improper connection may result in fatal damage to the receiver.

5.1-channel speaker system

 30˚  100˚ – 120˚

Speaker cable (not supplied) Monaural audio cable (not supplied)

To fully enjoy theater-like multi-channel surround sound, you need five speakers (two front speakers, a center speaker, and two surround speakers) and a subwoofer.

Connection and Preparation

7.1-channel speaker system using surround back speakers

 30˚  100˚ – 120˚  Same angle

Speaker cable (not supplied) Monaural audio cable (not supplied)

You can enjoy high-fidelity reproduction of recorded sound from DVD or Blu-ray Disc software in 6.1-channel or 7.1-channel format.

Tip

If you connect only one surround back speaker, place it directly behind the listening position and connect it to the L (+/–) terminals.

5.1.2-channel speaker system using top middle speakers

 30˚  100˚ – 120˚  65˚  80˚  100˚

Speaker cable (not supplied) Monaural audio cable (not supplied)

You can enjoy vertical sound effects by connecting additional two top middle speakers.

Connection and Preparation

5.1.2-channel speaker system using front Dolby Atmos enabled

 30˚  100˚ – 120˚

Speaker cable (not supplied) Monaural audio cable (not supplied)

speakers

You can enjoy vertical sound effects by connecting additional two front Dolby Atmos enabled speakers.

+ 44 hidden pages