
SPEAKER SYSTEM
SS-XGV11AV/XGV80
E Model
SPECIFICATIONS
SS-XGV11AV is the speaker system in LBT-XGV11AV.
SS-XGV80 is tha speaker system in LBT-XGV80.
9-877-431-01
2003E02-1
© 2003.05
Ver 1.0 2003.05
Sony Corporation
Home Audio Company
Published by Sony Engineering Corporation
SERVICE MANUAL
Speaker: SS-XGV11AV for LBT-XGV11AV
Speaker system 3-way BUILT IN SW,
magnetically shielded type
Speaker units
Super Woofer/Woofer: 22 cm/20 cm dia., cone type
Tweeter: 2.5 cm dia., horn type
Rated impedance 6 ohms
Dimensions (w/h/d) Approx. 305 x 610 x 435 mm
Mass Approx. 15 kg net per speaker
Speaker SS-XGV80 for LBT-XGV80
Speaker system 3-way BUILT IN SW,
bass-reflex type, magnetically shielded type
Speaker units
Super Woofer: 22 cm, cone type
Rated impedance 6 ohms
Woofer: 20 cm, cone type
Tweeter: 2.5 cm, horn type
Rated impedance 6 ohms
Dimensions (w/h/d) Approx. 305 x 615 x 435 mm
Mass Approx. 15.0 kg net per speaker
Design and specifications are subject to change without notice.

2
SS-XGV11AV/XGV80
NOTE:
• Items marked “*” are not stocked since they are
seldom required for routine service. Some delay
should be anticipated when ordering these items.
• Hardware (# mark) list and accessories and packing materials are given in the last of this parts list.
Ref. No. Part No. Description Remark
EXPLODED VIEW AND PARTS LIST
Ref. No. Part No. Description Remark
4
3
3
2
1
#1
#1
SP3
SP2
SP1
not supplied
FRONT PANEL
1. CABINET SECTION
1 4-999-101-01 SCREW, HEXAGON HOLE TAPPING
2 X-4955-476-1 HORN ASSY, TW
3 4-874-614-71 SCREW
4 4-227-036-01 BRACKET
SP1 1-504-594-11 SPEAKER (18cm) (XGV80)
SP1 1-504-594-21 SPEAKER (18cm) (XGV11AV)
SP2 1-529-961-11 SPEAKER (2.5cm)
SP3 1-504-515-11 SPEAKER (20cm) (XGV80)
SP3 1-504-515-21 SPEAKER (20cm) (XGV11AV)
#1 7-685-661-19 SCREW +BVTP 4X12 TYPE2 N-S