
OPERATING MANUAL
Before attempting to connect or operate this product, please read these
nstructions completely i
OKIUSA Standard Camera
1/3” SONY Super HAD CCD
1. General
This color video camera employs 1/3 inch charge coupled imaging device with
310/270 k picture elements and equipped with Digital Signal Processor for
video signal processing, to provide high quality stable picture.
2. Features
1. Resolution: 420 TV lines of horizontal resolution.
2. Low Lux: BY employing high sensitivity image sensor and low noise circuit
design produces 0.8 Lux and signal-to-noise ratio of 48 dB.
3. White Balance: The wide range of Auto Wide Balance (AWB) and Auto
Tracing White Balance (ATW) allow the camera to adjust automatically the
tone according to the color temperature of the light source illuminating the
subject.
4. Back Light Compensation: Smart digital control Auto BLC, ensure for use
against any unusual lighting conditions.
5. Auto Gain Control: Advanced Super AGC and auto gain control function
built-in.
6. Internal sync.
Model SST-6420 12V DC
Model SST-6420D 12V DC + 24V AC
Model SST-6420P 85 ~ 265V AC
-1 -

3. Name of parts and functions
AC 24V
DC 12V
PL
VI DE O O UT
AC85V ~ 265V
VI DE O O UT
PL
DC 12V
VI DE O O UT
PL
BLCOFF
SUPAGC
AE AI
ATW
BLC
AGC
AWB
FLOFF FLON
AI
FLON
SUPAGC
AWB
BLCOFF
ATW
AGC
BLC
AE
FLOFF
BLCOFF
AWB
SUPAGC
FLON
AI
AGC
ATW
FLOFF
AE
BLC
DC V IDEO
DC LEVEL
DIGIT AL
DCBA
EF
G
J
H
K
L
SST-6420P
SST-6420D
SST-6420
A. C(CS)mount adapter
If a CS mount lens is to be used, remove the C mount ring.
B. DC lever Adjuster(VR)
For DC drive auto iris lens driving level adjustment; in order to obtain
correct exposure light.
C. Auto iris lens connector(MINI JACK) See 3-1 auto-iris connector.
DC VIDEO
D. Video/DC auto-iris lens selector
DC—For DC Drive lens
Video—For Video drive lens
E. Flange focal lock screw
F. Holder screw hole
Standard photographic pan-head screw size(1/4”-20)
G. Dip Switch
BLC OFF
AW B
SUP AGC
FLON
AI
AGC
ATW
FLOFF
AE
BLC
AE /AI O PTIO N
WB MODE
AG C MO DE
BLC FUN CTIO N
FLICKERLESS FUNCTIO N
H. Video output terminal(BNC)
This connector is used to connect with the VIDEO IN connector of monitor.
-2 -