Sony SSM-L24F1, SSM-L22F1-R, SSM-L24F1-R, SSM-L22F1 Specsheet

SSM-L24F1 SSM-L22F1

LCD Security Monitors

The SSM-L24F1 and SSM-L22F1 are full-HD,

widescreen LCD monitors designed for use in

security applications – the SSM-L24F1 is a

24-inch monitor, while the SSM-L22F1 is a

21.5-inch monitor. Thanks to energy-efficient LED

backlighting, both models offer economical

operation. With various analog and digital

interfaces and other convenient features, these

monitors provide excellent performance in

video surveillance applications.

The monitor stand is optional.

KEY FEATURES

1080 Full-HD Panel

The SSM-L24F1 and SSM-L22F1 incorporate a full-HD LCD panel with a 16:9 aspect ratio. This high-quality LCD panel offers excellent picture quality thanks to a native resolution of 1920 x 1080. Both monitors adopt anti-glare coating on their LCD panels which can reduce light reflection, providing clear, high-contrast picture viewing.

LED Backlighting

With their energy-efficient LED backlighting, the SSM-L24F1 and SSM-L22F1 offer low power consumption of typically 34 W and 32 W respectively, saving operational costs.

Various Video and Audio Inputs

The SSM-L24F1 and SSM-L22F1 support HDMI and DVI-D digital interfaces, analog video inputs – composite (BNC), S-video, and RGB (HD-15) – and stereo audio inputs.

PinP (Picture-in-Picture)

The PinP function allows the picture from a secondary source to be displayed within the main picture. The secondary picture is variable in size and position. The following inputs are supported for display on the main screen and the sub-screen in PinP.

MAIN

SUB

Video

S-Video

HD-15

DVI

HDMI

Video S-Video HD-15 DVI HDMI

l l l l

Built-in Speaker

The SSM-L24F1 and SSM-L22F1 are equipped with a high-performance stereo speaker with 3 W + 3 W output.

VESA Mounting

These monitors support VESA-compliant mounting points (100 mm x 100 mm) to help ensure the safe installation of each unit.

Monitor Stand

Both models can be used as desktop monitors, simply by attaching the optional SSMA-SU10 Monitor Stand.

ISM (Image Sticking Minimization) Function

When ISM* is activated, several small black blocks appear on the monitor screen at random positions and intervals in a very short period of time. This can minimize the phenomenon of LCD monitor burn-in because the black blocks (groups of pixels) produced at black signal levels refresh pixels across the entire LCD panel.

* IMS cannot fully prevent LCD monitor burn-in.

SPECIFICATIONS DIMENSIONS

SSM-L24F1 SSM-L22F1

LCD Panel

Type a-Si TFT TN-type LCD

LED backlight

Panel Size (Diagonal) 24.0-inch 21.5-inch

Picture Size (H x V) 531.4 mm x 298.9 mm

(21 inches x 11 7/8 inches)

Panel Resolution (H x V) 1920 x 1080 pixels, Full HD 1920 x 1080 pixels, Full HD

Pixel Pitch 0.28 mm x 0.28 mm 0.25 mm x 0.25 mm

Color Depth 16.7 million colors 16.7 million colors

Brightness 250 cd/m

(typical) 250 cd/m2 (typical)

Viewing Angle 170° (H)/160° (V) (typical) 170° (H)/160° (V) (typical)

Signal

Color System NTSC, PAL NTSC, PAL

Sampling Rate 25.2 MHz to 148.5 MHz 25.2 MHz to 148.5 MHz

Input/Output

Digital Video HDMI (1080p) input x1 with audio input

Analog Video HD15 input

DVI (Rev.1.0 compliant) input

(RGB/Component video input) S-Video input Composite video input (BNC x1)

Remote Control RS-232C (for factory service use only) RS-232C (for factory service use only)

Speaker Output L/R, 3 W + 3 W (built-in) L/R, 3 W + 3 W (built-in)

General

Power Requirements AC adaptor, 100 V to 240 V, 50/60 Hz AC adaptor, 100 V to 240V (50/60 Hz)

Power Consumption 34 W (typical) 32 W (typical)

Operating Temperature 5°C to 40°C (41°F to 104°F) 5°C to 40°C (41°F to 104°F)

Storage Temperature -20°C to +60°C (-4°F to +140°F) -20°C to +60°C (-4°F to +140°F)

Humidity 10% to 80%, no condensation 10% to 80%, no condensation

Dimensions (W x H x D)

569.5 mm x 353 mm x 44 mm (22 1/2 inches x 14 inches x 1 3/4 inches)(excluding protrusions)

Mass 4.40 kg (9 lb 11 oz) 3.36 kg (7 lb 7 oz)

Regulation Compliance

UL/cUL: UL60950-1, CSA C22.2 No. 60950-1, FCC: Class A, IC: Class A, CB: IEC60950-1, CE: EN55022 Class A, VCCI: Class A, C-Tick: EN55022 Class A, GOST-R

Other Features ISM (Image Sticking Minimization) ISM (Image Sticking Minimization)

Supplied Accessories AC adapter (1)

VGA cable (1) Logo plates (black, gray) (1 each) Cable clamp (1) Operation Manual (1)

a-Si TFT TN-type LCD LED backlight

476.6 mm x 268.1 mm (18 7/8 inches x 10 5/8 inches)

HDMI (1080p) input x1 with audio input DVI (Rev.1.0 compliant) input

HD15 input (RGB/Component video input) S-Video input Composite video input (BNC x1)

516.5 mm x 312.1 mm x 60.5 mm (20 3/8 inches x 12 3/8 inches x 2 1/2 inches) (excluding protrusions)

UL/cUL: UL60950-1, CSA C22.2 No. 60950-1, FCC: Class A, IC: Class A, CB: IEC60950-1, CE: EN55022 Class A, VCCI: Class A, C-Tick: EN55022 Class A, GOST-R

AC adapter (1) VGA cable (1) Cable clamp (1) Operation Manual (1)

SSM-L24F1

)

353.0 (14)

301.0 (11

533.0 (21)

569.5 (22

/2)

100.0 (4)

SSM-L22F1

)

269.0 (10

312.1 (12

478.0 (18 7/8)

516.5 (20

/8)

100.0 (4)

OPTIONAL ACCESSORY

44.0

60.5

Unit: mm (inches)

/4)

/2)

Note on LCD burn-in

LCD panels are susceptible to burn- in. When a non- moving image is displayed in the same position for prolonged periods or at constant intervals, the image may become permanently burned into the screen.

Distributed by

Reproduction in whole or in part without permission is prohibited.

Features and specifications are subject to change without notice.

“Sony”, “make.believe”, and “IPELA” are trademarks of Sony Corporation.

All other trademarks are the properties of their respective owners.

MK10955V1OHB12JUL

ENERGY STAR and the ENERGY STAR mark are registered U.S. marks.

SSMA-SU10 Monitor Stand

The values for mass and dimension are approximate.

As an ENERGY STAR Partner, Sony confirmed that this

product meets the ENERGY STAR standards

for energy efficiency.