Sony SRS-X77 Operating Instructions

4-570-617-14(1)

Personal Audio System Système audio personnel Sistema de audio personal

Operating Instructions

Mode d’emploi

Manual de instrucciones

Refer to the Wi-Fi Startup Guide (separate document) for how to listen to music stored in your PC or other device over your Wi-Fi network. Reportez-vous au guide de démarrage Wi-Fi (document distinct) pour savoir comment écouter la musique stockée sur votre PC ou autre périphérique à l'aide de votre réseau Wi-Fi. Consulte la Guía de inicio de Wi-Fi (se encuentra en un documento aparte) acerca de cómo escuchar la música almacenada en su PC u otro dispositivo a través de la red Wi-Fi.

SRS-X77

Before operating the system, please read this guide thoroughly and retain it for future reference.

Owner’s Record

The serial number is located on the bottom. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product.

Model No. SRS-X77

Serial No.

For customers in the USA

Please register this product on line at http:// www.sony.com/productregistration Proper registration will enable us to send you periodic updates about new products, services and other important announcements. Registering your product will also allow us to contact you in the unlikely event that the product needs adjustment or modification. Thank you.

WARNING

To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

To reduce the risk of fire, do not cover the ventilation opening of the appliance with newspapers, tablecloths, curtains, etc. Do not expose the appliance to naked flame sources (for example, lighted candles). To reduce the risk of fire or electric shock, do not expose this apparatus to dripping or splashing, and do not place objects filled with liquids, such as vases, on the apparatus. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. Do not expose batteries or apparatus with battery installed to an excessive heat such as sunshine, fire or the like. As the main plug is used to disconnect the unit from the mains, connect the unit to an easily accessible AC outlet. Should you notice an abnormality in the unit, disconnect the main plug from the AC outlet immediately. The system is not disconnected from the mains as long as it is connected to the AC outlet, even if the system itself has been turned off.

CAUTION

You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.

When using a LAN cable, use a shielded type.

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

 Reorient or relocate the receiving antenna.  Increase the separation between the equipment

and receiver.

 Connect the equipment into an outlet on a

circuit different from that to which the receiver is connected.

 Consult the dealer or an experienced radio/TV

technician for help.

This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment should be installed and operated keeping the radiator at least 20 cm or more away from person’s body (excluding extremities: hands, wrists, feet and ankles).

This equipment must not be co-located or operated in conjunction with any other antenna or transmitter.

The Caution Marking is put on the AC adaptor.

This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance

If you have any questions about this product, you may call; Sony Customer Information Service Center 1-800-222-7669 or

http://www.sony.com

Compliance with FCC requirement 15.407(c) Data transmission is always initiated by software, which is the passed down through the MAC, through the digital and analog baseband, and

finally to the RF chip. Several special packets are initiated by the MAC. These are the only ways the digital baseband portion will turn on the RF transmitter, which it then turns off at the end of the packet. Therefore, the transmitter will be on only while one of the aforementioned packets is being transmitted. In other words, this device automatically discontinues transmission in case of either absence of information to transmit or operational failure.

Frequency Tolerance: ±20ppm

5.15-5.25 GHz band is restricted to indoor operations only.

Important Safety Instructions

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11) Only use attachments/accessories specified by the manufacturer.

12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long periods of time.

14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been

exposed to rain or moisture, does not operate normally, or has been dropped.

For customers in the USA and Canada only

RECYCLING LITHIUM-ION BATTERIES

Lithium-Ion batteries are recyclable. You can help preserve our environment by returning your used rechargeable batteries to the collection and recycling location nearest you. For more information regarding recycling of rechargeable batteries, call toll free 1-800-8228837, or visit http://www.call2recycle.org

Caution: Do not handle damaged or leaking Lithium-Ion batteries.

For all other batteries, please view the section on how to remove the battery from the product safely. Hand the battery over to the applicable collection point for the recycling of waste batteries. For more detailed information about recycling of this product or battery, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.

For customers in Canada

This device complies with Industry Canada licenceexempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

High-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices.

Outdoor use of the 5 GHz Wi-Fi function is prohibited by law.

Compliance with IC requirement RSS-210 A9.4.4 Data transmission is always initiated by software, which is the passed down through the MAC, through the digital and analog baseband, and finally to the RF chip. Several special packets are initiated by the MAC. These are the only ways the digital baseband portion will turn on the RF transmitter, which it then turns off at the end of the packet. Therefore, the transmitter will be on only while one of the aforementioned packets is being transmitted. In other words, this device automatically discontinues transmission in case of either absence of information to transmit or operational failure.

Precautions

Polarity of the plug

On safety

The nameplate indicating the Sony trademark, model number and electrical rating is located on the bottom exterior of this unit. The MAC address is located on the bottom exterior of this unit. MAC1: MAC address of wired network MAC2: MAC address of Wi-Fi network

 Before operating the unit, be sure that the

operating voltage of the unit is identical with that of your local power supply.

Where purchased Operating voltage

All countries/regions

Notes on the AC adaptor

 When connecting or disconnecting the AC

adaptor, turn off the unit beforehand. Otherwise, it may cause malfunction.

 Use only the supplied AC adaptor. To

avoid damaging the unit, do not use any other AC adaptor.

100 V – 240 V AC, 50 Hz/60 Hz

 Do not leave the unit in a location near

heat sources, or in a place subject to direct sunlight, excessive dust, moisture, rain or mechanical shock.

On operation

 Do not insert any small objects, etc., into

the jacks or ventilation hole on the rear of the unit. The unit may short out or malfunction.

On cleaning

 Do not use alcohol, benzine, or thinner to

clean the cabinet.

Others

 If you have any questions or problems

concerning this unit that are not covered in this manual, please consult your nearest Sony dealer.

 When disposing of or giving away this

unit, make sure to initialize it to reset all settings to the factory defaults (page 23).

 Plug the AC adaptor into a nearby wall

outlet (mains). In the case of a problem, unplug it from the wall outlet (mains) immediately.

 Do not install the AC adaptor in a confined

space, such as a bookcase or built-in cabinet.

 To reduce the risk of fire or electric shock,

do not expose the AC adaptor to dripping or splashing, and do not place objects filled with liquids, such as vases, on the AC adaptor.

 The validity of the CE marking is restricted

to only those countries where it is legally enforced, mainly in the countries EEA (European Economic Area).

On placement

 Do not set the unit in an inclined position.

Disposing of the unit

Note

Documents provided

For environment protection, remove the built-in lithium-ion battery pack from the unit. Before removing the battery, drain the battery by removing the AC adaptor and using the unit only with the battery.

Take out the lithium-ion battery for recycling. Do not open the cabinet other than when disposing of the unit.

Turn off the unit and remove the AC adaptor.

Detach the cover of the bottom of the unit to remove the battery pack.

 Remove the 6 rubber covers from the

bottom of the unit.

 Remove the 6 screws.  Remove the cover.  Remove the connector plug from the

unit.

 Remove the battery.

Operating Instructions (this document)

Explains important safety information, BLUETOOTH connection method, troubleshooting, etc.

Wi-Fi Startup Guide (separate document)

Explains how to listen to music stored in your PC or other device over your WiFi network.

Help Guide (web document for a PC/ smartphone)

Explains details about the unit; network and BLUETOOTH connection method with various devices, High-Resolution Audio playback method, etc.

http://rd1.sony.net/help/speaker/srs-x77/h_zz/

 Be careful not to damage the cord cover with

metallic tweezers, etc. when you remove the battery pack from the unit.

 Do not put the battery into a fire. Also, do not

heat the battery, or apply pressure to the battery.

On copyrights

 Windows, the Windows logo, and

Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

 This product is protected by certain

intellectual property rights of Microsoft Corporation. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft or an authorized Microsoft subsidiary.

 Apple, the Apple logo, AirPlay, iPad,

iPhone, iPod, iPod nano, iPod touch, iTunes, Mac and OS X are trademarks of Apple Inc., registered in the U.S. and other countries. iPad Air and iPad mini are trademarks of Apple Inc. App Store is a service mark of Apple Inc. “Made for iPod,” “Made for iPhone,” and “Made for iPad” mean that an electronic accessory has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone, or iPad may affect wireless performance.

 “ ” is a mark of the Wi-Fi Alliance.  Wi-Fi®, Wi-Fi Protected Access® and Wi-Fi

Alliance® are registered marks of the Wi-Fi Alliance.

 Wi-Fi CERTIFIED™, WPA™, WPA2™ and

Wi-Fi Protected Setup™ are marks of the Wi-Fi Alliance.

 “S-Master” is a trademark of Sony

Corporation.

 ClearAudio+ and are

trademarks of Sony Corporation.

 “DSEE” and are trademarks of

Sony Corporation.

 MPEG Layer-3 audio coding technology

and patents licensed from Fraunhofer IIS and Thomson.

 The BLUETOOTH® word mark and logos

are owned by the Bluetooth SIG, Inc. and any use of such marks by Sony Corporation is under license. Other trademarks and trade names are those of their respective owners.

 The N-Mark is a trademark or registered

trademark of NFC Forum, Inc. in the United States and in other countries.

 Google Play and Android are trademarks

of Google Inc.

 “Xperia” and “Xperia Tablet” are

trademarks of Sony Mobile Communications AB.

 Google Cast™ and the Google Cast Badge

are trademarks of Google Inc.

 WALKMAN® and WALKMAN® logo are

registered trademarks of Sony Corporation.

 LDAC™ and LDAC logo are trademarks of

Sony Corporation.

 DLNA™, the DLNA Logo and DLNA

CERTIFIED™ are trademarks, service marks, or certification marks of the Digital Living Network Alliance.

 AOSS is a trademark of BUFFALO INC.  This product incorporates Spotify

software which is subject to 3rd party licenses found here: https://developer.spotify.com/esdkthird-party-licenses/

 Spotify and Spotify logos are trademarks

of the Spotify Group.

 The system names and product names

indicated in this manual are generally the trademarks or registered trademarks of the manufacturer. ™ and ® marks are omitted in this manual.

Notes on the License

This product contains software that Sony uses under a licensing agreement with the owner of its copyright. We are obligated to announce the contents of the agreement to customers under requirement by the owner of copyright for the software. Please access the following URL and read the contents of the license. http://rd1.sony.net/help/speaker/sl/15/

Notice on GNU GPL/LGPL applied software

This product contains software that is subject to the following GNU General Public License (hereinafter referred to as “GPL”) or GNU Lesser General Public License (hereinafter referred to as “LGPL”). These establish that customers have the right to acquire, modify, and redistribute the source code of said software in accordance with the terms of the GPL or LGPL supplied. The source code for the above-listed software is available on the Web. To download, please access the following URL then select the model name “SRS-X77”. URL: http://oss.sony.net/Products/Linux/ Please note that Sony cannot answer or respond to any inquiries regarding the content of the source code.

Notes on the update

If you use this unit while connected to the Internet via a wired or Wi-Fi network, the unit can update to the latest software automatically. By updating the software, new features will be added enabling you to experience more convenient and stable use. If you do not want to automatically update the software, you can disable this function by using the SongPal installed on your smartphone/ iPhone. However, the software may be updated automatically for stable use, etc., even if you disable this function. Also, if you disable this function, you can still update the software manually. For details about how to set and operate, refer to the Help Guide. The unit may not be operational while updating.

Disclaimer regarding services offered by third parties

Services offered by third parties may be changed, suspended, or terminated without prior notice. Sony does not bear any responsibility in these sorts of situations.

Table of Contents

Precautions..................................... 4

Disposing of the unit........................5

Documents provided .......................5

On copyrights.................................. 6

Getting started

Location and function of controls... 9

About SongPal

What you can do with SongPal ...... 12

Listening to music through a BLUETOOTH connection

Pairing the unit with a BLUETOOTH

device and listening to music..... 13

Listening to music by one-touch

action (NFC) ................................ 15

Listening to music via a Wi-Fi network

Selecting the method of network

connection..................................16

Connecting with a PC.....................16

Listening to the same music from the

multiple speakers (SongPal Link

function) .....................................18

Listening to an Internet music service

(Google Cast) ..............................18

Listening to an Internet music service

(Spotify) ......................................19

Listening to music with connected components

Listening to music on an external

device (AUDIO IN)....................... 20

Additional information

Troubleshooting ............................21

What is BLUETOOTH wireless

technology? ...............................24

Specifications................................ 25

Getting started

Rear of the unit

Location and function of controls

Getting started

 UPDATE button

Indicates the status of the unit’s software update.

 CHARGE indicator

Display the charging status of the built-in lithium-ion battery by the lighting and flashing of the indicator.

 VOL (volume) –/+ buttons

Tap to adjust the volume. The / (on/standby) indicator flashes according to the volume adjustment when tapped.

/ (on/standby) button/indicator

Tap to turn the power of the unit on and off.

 LINK indicator

Indicates the status of the network connection of the unit.

 NETWORK button/indicator

Tap to switch the unit to NETWORK mode. Tap to use various music services or listen to music stored in a device on the home network with the unit.

 (BLUETOOTH) PAIRING button/

indicator

Tap when pairing or connecting with a BLUETOOTH device or listening to music with a BLUETOOTH device. Tap once to switch the unit to BLUETOOTH mode. Tap and hold to switch the unit to pairing mode.

 AUDIO IN button/indicator

Tap to listen to music in a device connected to the AUDIO IN jack. The AUDIO IN indicator lights up when tapped.

 Wi-Fi antenna

Set upright during Wi-Fi connection as below.

 LAN port

Use a LAN cable (not supplied) to connect the PC or the wireless router. When using a LAN cable, use a shielded type.

 AUDIO IN jack

Connect to the headphone jack of a portable audio device, etc., using a audio cable (not supplied).

 DC IN 18 V jack

Connect the AC adaptor (supplied).

When the indicator is lit or flashing

 Push the right side of the antenna,

and the antenna comes out from the recess.

 Bring up the antenna.

 N-Mark

If your smartphone is NFC-compatible, touch the smartphone on the N-Mark. The unit will turn on automatically and registering (pairing) and BLUETOOTH connection can be made.

 NETWORK OFF/ON switch

Turn the network function on and off. Set this switch to ON when connecting to the network.

 RESET button

Push to reset the unit.

 WPS button

Press and hold when connecting to a WiFi network. Beeps will be heard by pressing and holding the WPS button for 2 seconds, which indicates that the unit is ready to connect to a wireless router. If your wireless router has a WPS button, you can use this button to connect to the network.

 DC OUT ONLY port (USB)

Connect a USB device, such as smartphone, using a USB cable (not supplied) to charge from the unit. If you play music on the connected USB device, sound will not be output from the unit.

/ (on/standby) indicator

Indicator status (color)

Lights up (green) The unit is turned on. Lights up (orange) The unit is in the

Turns off The unit is in the standby

Flashes (green) • If you tap the / (on/

Flashes (red) A software update is failed,

Unit status

BLUETOOTH/Network standby mode. The BLUETOOTH/Network standby function can be set only when the unit is connected to an AC outlet via the AC adaptor. When the unit is being powered by the built-in battery only, the BLUETOOTH/Network standby function is not available.

mode.

standby) button to turn off the unit, the indicator flashes slowly in green, then lights up in orange or turns off. While the indicator is flashing, the unit is not operational.

• When you tap the VOL (volume) –/+ button, the indicator flashes once or three times according to the volume adjustment.

or the unit is in the protect mode. See “/ (on/ standby) indicator is flashing red” (page 22) for details.

CHARGE indicator

Indicator status (color)

Turns off Charging of the unit is

Lights up (orange) The unit is charging. Flashes slowly

(orange)

Flashes three times and turns off (orange)

Unit status

completed.

The built-in battery is running low and needs to be charged. In this state, the unit cannot supply power to other devices.

If the CHARGE indicator flashes three times and goes off when you turn on the unit, the battery is empty and needs to be charged.

LINK indicator

Indicator status (color)

Lights up (orange) The unit is connected to a

Lights up (pink) The unit is connected to a

Flashes (orange) The unit is in the process of

Flashes (pink) The unit is in the process of

Flashes (red) The network connection

Lights up (red) The network connection

The color of the lit/flashing indicator changes depending on the connected music service.

 Refer to Help Guide for details. http://rd1.sony.net/help/speaker/srs-x77/h_zz/

Unit status

Wi-Fi network.

wired network.

connecting to a Wi-Fi network.

connecting to a wired network.

failed.

failed, or connection failed even though the network setting is complete.

(BLUETOOTH) PAIRING indicator

Indicator status (color)

Lights up (white) The unit is connected to a

Flashes quickly (white)

Flashes (white) The unit is searching for a

Unit status

BLUETOOTH device. The unit is pairing with a

BLUETOOTH device.

BLUETOOTH device to connect.

NETWORK indicator

Indicator status (color)

Lights up (white) The unit is in the NETWORK

Flashes (white) The unit is receiving an

Unit status

mode.

audio file via the network.

UPDATE button

Indicator status (color)

Lights up (orange) The button lights up in

Flashes (orange) • The unit is updating the

Unit status

orange when the unit detects the latest software while connected to the Internet. When you tap and hold the lit button, the update of the unit’s software is started.

software. During the update, you cannot operate the unit.

• When the unit turns on for

the first time after the software update, the UPDATE button flashes three times to inform you that the update is completed.

Getting started

About SongPal

Sound settings of SRS-X77

You can easily customize your sound, or use Sony’s recommended settings “ClearAudio+”.

Music service*

You can configure the initial settings to use music services. To enjoy music services, a third party application is required.

Controlling devices on your home network

You can play music stored in your PC or home network server over your network.

 Refer to Help Guide for detailed

operation.

http://rd1.sony.net/help/speaker/srs-x77/h_zz/

What you can do with SongPal

SongPal is an application for controlling Sony audio devices which are compatible with SongPal using your smartphone/ iPhone.

Search for SongPal on Google Play™ or the App Store, and download it.

Downloading this application on your smartphone/iPhone provides the following.

change, stop or be terminated without notice. Sony does not assume any responsibility for such situations.

What you can control with SongPal varies depending on the connected device. The specification and design of the application may change without notice.

The overview of the devices on the home network is displayed. You can select the audio device to play or group the audio devices using SongPal Link (multi-room function).

* Depending on the country and region, music

services and their period of availability may differ. A separate registration is required for certain services. An update of the device may be required. The services provided by third parties may

You can select sound sources for playback from the list of the selectable sound sources. Also, you can make various sound/network settings of audio device.

 Refer to SongPal Help for more details.

http://info.songpal.sony.net/help/

Note

Tip

Note

Listening to music through a BLUETOOTH connection

Pairing the unit with a BLUETOOTH device and listening to music

You can listen to music from BLUETOOTH device over a wireless connection. Before using the BLUETOOTH function, perform pairing to register your BLUETOOTH device.

 When pairing the unit with a BLUETOOTH device,

place the BLUETOOTH device within one meter of the unit.

 When pairing the unit with a BLUETOOTH device,

connect the unit to the AC outlet or charge the battery sufficiently.

 If your BLUETOOTH device is compliant with

one-touch connection (NFC), skip the next procedure. See “Listening to music by one-touch action (NFC)” (page 15).

Turn on the unit.

The / (on/standby) indicator lights up in green.

BLUETOOTH device, terminate the current BLUETOOTH connection by operating the currently connected BLUETOOTH device.

Tap and hold the (BLUETOOTH)

PAIRING button until beeps

are heard.

The (BLUETOOTH) indicator begins to flash quickly in white, and the unit enters pairing mode.

Perform the pairing procedure on

the BLUETOOTH device to detect the unit.

When a list of detected devices appears on the display of the BLUETOOTH device, select “SRS-X77”. If passkey entry is required on the display of the BLUETOOTH device, enter “0000”.

Stop playback on the BLUETOOTH device before performing the pairing procedure. Loud sound may be output when the BLUETOOTH connection is established. In addition, after the connection is established, loud sound may be output at the time of the first playback operation. It is recommended to turn down the volume before starting playback.

Listening to music through a BLUETOOTH connection

Tap the (BLUETOOTH)

PAIRING button.

The (BLUETOOTH) indicator begins to flash in white.

 From the factory, pairing information is not

stored in the unit. As such, when you tap the (BLUETOOTH) PAIRING button, the (BLUETOOTH) indicator will begin to flash quickly in white and the unit enters pairing mode automatically. In this case, proceed to step 4.

 When you tap the (BLUETOOTH)

PAIRING button, the unit tries to make BLUETOOTH connection with the last connected BLUETOOTH device. If the device is nearby, the BLUETOOTH connection is established automatically and the (BLUETOOTH) indicator stays lit. When you want to connect another

Make the BLUETOOTH connection

from the BLUETOOTH device.

When the BLUETOOTH connection is established, the (BLUETOOTH) indicator stays lit. If the BLUETOOTH connection is not established, repeat from step 3.

Adjust the volume on the

BLUETOOTH device, or tap the VOL (volume) –/+ button to adjust the volume.

Start playback on the

Tip

Note

Tip

BLUETOOTH device.

 You can perform a pairing operation or attempt

to make a BLUETOOTH connection with another BLUETOOTH device while the BLUETOOTH connection is established with one BLUETOOTH device. The currently established BLUETOOTH connection is canceled when BLUETOOTH connection with another device is successfully established.

 SongPal does not have a music playback

function via the BLUETOOTH connection. Play music using the music playback software of BLUETOOTH devices (such as smartphone, PC, etc.).

 The operations described above may not be

available for certain BLUETOOTH devices. In addition, the actual operations may differ depending on the connected BLUETOOTH device.

 Pairing mode of the unit is released after about 5

minutes and the (BLUETOOTH) indicator flashes slowly. However, when pairing information is not stored in the unit, such as from the factory, pairing mode is not released. If pairing mode is released before finishing the process, repeat from step 3.

 When pairing with a BLUETOOTH device that

cannot display a list of detected devices or that has no display, you may pair the device by setting both the unit and the BLUETOOTH device to pairing mode. At this time, if a passkey other than “0000” is set on the BLUETOOTH device, pairing cannot be done with the unit.

 Once a pairing operation is performed, it does

not have to be performed again. In the following cases, however, a pairing operation must be performed again:

 Pairing information was erased when the

BLUETOOTH device was repaired.

 You attempt to pair the unit with more than 9

BLUETOOTH devices. This unit can pair with up to 9 BLUETOOTH devices. If you pair another BLUETOOTH device after pairing with 9 devices was performed, pairing information of the device that was connected with the unit first is overwritten with that of the new device.

 Pairing registration information of this unit is

erased from the connected device.

 If you initialize the unit, all the pairing

information will be erased.

 The unit can be paired with multiple devices, but

can only play music from one paired device at a time.

 “Passkey” may be called “Passcode,” “PIN code,”

“PIN number” or “Password,” etc.

To cancel the connection with the BLUETOOTH device

Disconnect the BLUETOOTH connection on the BLUETOOTH device.

When you finish playing music, the BLUETOOTH connection may terminate automatically, depending on the BLUETOOTH device.

Listening to music through a registered device

After step 2 on “Pairing the unit with a BLUETOOTH device and listening to music” (page 13), operate the BLUETOOTH device to connect with the unit. After adjusting the volume on the BLUETOOTH device, start playback on the BLUETOOTH device.

Stop playback on the BLUETOOTH device before connecting the unit to the BLUETOOTH device.

Listening to music by

Tip

one-touch action (NFC)

NFC is a technology for short-range wireless communication between various devices such as a mobile phone and IC tag. Just touch your smartphone on the unit. The unit is turned on automatically, and pairing and BLUETOOTH connection are established. Beforehand, turn the NFC settings to on and unlock the screen of the smartphone.

Touch your smartphone on the

N-Mark on the unit.

Touch the smartphone on the unit and maintain contact until the smartphone responds. Refer to the user’s guide of your smartphone for the part of your smartphone used as touch contact.

When you touch an NFC-compliant smartphone on the unit while another BLUETOOTH device is connected with this unit, the BLUETOOTH device is disconnected and the unit is connected with the smartphone.

Listening to music through a BLUETOOTH connection

Follow the on-screen instructions to establish the connection. When a BLUETOOTH connection is established, the (BLUETOOTH) indicator stops flashing and stays lit.

After completing the connection,

start playback on the smartphone.

To disconnect the established connection, touch your smartphone on the N-Mark on the unit.

Tip

Note

Tip

Listening to music via a Wi-Fi network

LAN cable (not supplied)

Selecting the method of network connection

If you connect this unit to a network, you can enjoy this unit in various ways. Depending on your network environment, setting up methods are different. Select the appropriate connecting method for your network environment from below.

For setting the fixed IP address, use the screen in step 6 of “Connecting with a PC” (page 16).

Connecting with a PC

If your wireless router does not have a WPS (AOSS) button, configure Wi-Fi settings by connecting the unit to your PC with a LAN cable. Prepare a commercially-available LAN cable beforehand.

When setting up a Wi-Fi network, the SSID (Wi-Fi Network Name) and security key (WEP or WPA key) may be required. The security key (or network key) uses encryption to limit the devices with which communication can occur. It is used to provide higher security for devices communicating via a wireless router/access point.

 Connecting to a Wi-Fi network and a wired

network simultaneously is not possible. When you connect to a Wi-Fi network, be sure to disconnect the LAN cable from the unit.

Method for using a smartphone/ iPhone

Install the SongPal application for your smartphone/iPhone. For details, refer to the Wi-Fi Startup Guide (separate document).

Method for using a wireless router with a WPS (AOSS) button

Use the WPS button to connect. For details, refer to the Wi-Fi Startup Guide (separate document).

Method for using a PC

See “Connecting with a PC” (page 16).

Method for using a wired network

 Refer to Help Guide for details.

http://rd1.sony.net/help/speaker/srs-x77/h_zz/

Record the SSID and password of

your router.

For details, refer to the operating instructions of your router.

SSID (Wi-Fi Network Name)

Password (Security Key)

Connect the unit to the PC with a

LAN cable directly.

Use a commercially-available LAN cable to connect.

Set the NETWORK OFF/ON switch

Note

Network Settings

SSID

to ON, then turn the unit on.

Wait until the LINK indicator stops flashing and stays lit in pink. It takes about 1 minutes.

When you connect the unit to a PC for the first time, it takes about 4 or 5 minutes until the LINK indicator stops flashing and stays lit.

Select the SSID of your wireless

router and enter the password.

Display [Sony Network Device

Settings] on your PC.

 Launch a browser.  Enter the following URL in the

address bar.

The above URL is only for when the PC and unit are connected with a LAN cable.

Select [Network Settings] from

the menu.

See the recorded password in step 1 (page 16).

Select [Apply].

When prompted, unplug the LAN

cable from the unit.

Check that the LINK indicator

lights up in orange.

Set the Wi-Fi antenna (page 10). When the Wi-Fi connection is established, the LINK indicator lights up in orange. It may take more than 1 minute to light up.

For information on how to listen to music with this unit, refer to the Wi-Fi Startup Guide (separate document).

Listening to music via a Wi-Fi network

Listening to the same music from the multiple speakers (SongPal Link function)

Listening to an Internet music service (Google Cast)

The following instructions explain how to use a Google Cast-enabled music app.

Enjoy music in any room via Wi-Fi. You can listen to your favorite music stored in your PCs or mobile phones and furthermore, music from streaming services, in different rooms with ultimate sound quality.

Install the free application

SongPal on your smartphone/ iPhone.

Connect the unit and

smartphone/iPhone to your WiFi network.

Connect the unit and smartphone/ iPhone to the same SSID (network) of your router.

When connecting multiple

devices, connect the SongPal Link compatible devices to your Wi-Fi network.

 Refer to Help Guide for detailed

operation.

http://rd1.sony.net/help/speaker/srs-x77/h_zz/

Install the free application

SongPal on your smartphone/ iPhone.

Connect the unit and

smartphone/iPhone to your WiFi network.

Connect the unit and smartphone/ iPhone to the same SSID (network) of your router.

Launch SongPal, and download a

Google Cast-enabled music app.

 Launch SongPal, then tap [SRS-X77]

 [Settings]  [Google Cast] 

[Learn how to cast].

 See the instructions, then find and

install a Google Cast-enabled app on your smartphone/iPhone.

Launch the Google Cast-enabled

app, then tap the Cast button to select [SRS-X77].

Select music to listen to on your

Tip

Note

Select the unit

Google Cast-enabled app.

The music is played on the unit.

 Refer to Help Guide for detailed

operation.

http://rd1.sony.net/help/speaker/srs-x77/h_zz/

Tap the Connect icon ( ) and

select the unit as the audio output device.

When “Spotify Connect” is activated, the Connect icon ( ) lights up.

Listening to an Internet music service (Spotify)

“Spotify” gives you instant access to millions of songs. The “Spotify Connect” feature lets you select music on the Spotify app and stream it on the unit. To use “Spotify Connect” feature, you need a Premium account. For details, visit www.spotify.com/connect

Connect the unit and

smartphone/iPhone to your WiFi network.

Connect the unit and smartphone/ iPhone to the same SSID (network) of your router.

Download the Spotify app to

your smartphone/iPhone from Google Play or the App Store.

Launch the Spotify app and log in

to a Spotify Premium account.

Depending on the country and region, music services and their periods of availability may differ.

Listening to music via a Wi-Fi network

Select and start playing the

music.

Listening to music with connected

Audio cable (not supplied).

components

Listening to music on an external device (AUDIO IN)

Connect the device to the AUDIO

IN jack with an audio cable (not supplied).

Tap the AUDIO IN button, then

start playback on the connected device.

 Refer to Help Guide for detailed

operation.

http://rd1.sony.net/help/speaker/srs-x77/h_zz/

Additional information

Troubleshooting

If a problem occurs while operating the unit, check the following to resolve the problem before consulting your nearest Sony dealer.

 Check to see if the problem is listed in this

“Troubleshooting” section.

 Check in Help Guide.

 Refer to “How to use” and

“Troubleshooting” in Help Guide for details.

http://rd1.sony.net/help/speaker/srs-x77/h_zz/

 Check information about the problem on

the customer support website. For customers in the U.S.A.: http://esupport.sony.com/US For customers in Canada: http://esupport.sony.com/CA/

 Connect the unit to an AC outlet via the

AC adaptor to charge the battery. You may be able to resolve some issues by charging the battery.

 Push the RESET button on the rear of the

unit with a pointed object, such as a pin.

Then turn on the unit. If the problem persists after doing all of the above, consult your nearest Sony dealer.

BLUETOOTH

Unable to pair the unit with a BLUETOOTH device/ BLUETOOTH connection between the unit and smartphone/iPhone is not possible using SongPal



Bring the unit and the BLUETOOTH device to within 1 m (3 ft) of each other.

 If the (BLUETOOTH) indicator is not flashing

quickly in white, tap and hold the (BLUETOOTH) PAIRING button until the unit beeps and the (BLUETOOTH) indicator starts flashing quickly in white.

 Connect the unit to an AC outlet or charge the

battery of the unit sufficiently.

 If you initialize the unit, the unit may not be

able to connect your iPhone/iPad/iPod or PC. In this case, erase the pairing information on the iPhone/iPad/iPod or PC, and then perform the pairing procedure again.

Unable to connect the unit to a BLUETOOTH device with one-touch connection (NFC)



Keep the smartphone close to the unit until the smartphone responds. If the unit fails to connect, move the smartphone slowly on the N-Mark of the unit. When the smartphone responds, follow the on-screen instructions to establish the connection.

 Check that the NFC function of the

smartphone is set to on.

 If the smartphone is in a case, remove it.  NFC reception sensitivity varies, depending on

the device. If you repeatedly fail to connect the unit with a smartphone by one touch, make the connection by on-screen operation.

 Check that your smartphone is compatible

with NFC. Look up information on the issue on the customer support website.

There is no sound



If you are connecting a PC to the unit, make sure the audio output setting of the PC is set for a BLUETOOTH device.

 Check that the unit has established

BLUETOOTH connection with the BLUETOOTH device.

 Pair the unit and the BLUETOOTH device

again.

Distorted sound/humming or noise in the speaker output

Bring the unit and the BLUETOOTH device



closer together. Remove any obstacles between the unit and the BLUETOOTH device.

 Select “Priority on stable connection” for

BLUETOOTH audio streaming playback quality.

Additional information

Network

A Wi-Fi connection between the unit and home network is not possible



The unit does not support IEEE 802.11ac . Use

the 2.4 GHz frequency band (IEEE 802.11 b/g/

n) or 5 GHz frequency band (IEEE 802.11 a/n)

for the Wi-Fi network.

 When setting a Wi-Fi network using the

SongPal application on your smartphone/

iPhone, connect your smartphone/iPhone to

the Wi-Fi network to be used beforehand.

 If a LAN cable is connected to the unit,

disconnect it and restart the unit. When a LAN

cable is connected to the unit, the unit

automatically tries to connect to the home

network over a wired network and a wireless

network cannot be used.

 Check that your wireless router is turned on.  Bring the unit and wireless router closer

together. Devices that use the 2.4 GHz

frequency band, such as a microwave oven,

BLUETOOTH or digital cordless device, etc.,

may interrupt Wi-Fi communication. Move the

unit away from such devices or turn them off.

 Set the Wi-Fi antenna.  If a Wi-Fi network is not possible even if the

setting of a Wi-Fi network is correct, try the

following.

 Turn off the wireless router/access point,

wait a while and turn on the power again.

 Turn off the unit, wait a while and turn on

the power again.

Distorted sound/humming or noise in the unit output



Turn down the volume of the connected

device.

 If a connected device has an equalizer

function, turn it off.

 Keep the unit away from a microwave oven,

other wireless devices, etc.

 Keep the unit away from metal objects.  Connect the unit and wireless router/PC via a

LAN cable, not via Wi-Fi network.

iTunes cannot find the unit via AirPlay

Make sure the PC with iTunes installed and the



unit are connected to the same home network.

 Update the software version of iTunes to the

latest version.

General

/ (on/standby) indicator is flashing red

A software update is failed, or the unit is in the



protect mode. Check the following to resolve the problem.

 The UPDATE button is flashing in orange.

Software update is failed. Update the software using a USB flash drive. Check the customer support website about how to update the software with a USB flash drive. Turn off the unit until you perform the software update.

 The unit does not turn off by tapping the

/ (on/standby) button.

The unit is in the protect mode. Push the RESET button on the rear of the unit with a pointed object, such as a pin. Then turn on the unit. If the / (on/standby) indicator keeps flashing, consult your nearest Sony dealer or the shop you purchased this unit.

The unit has entered standby mode or BLUETOOTH/Network standby mode unexpectedly



This is not a malfunction. The unit enters standby mode or BLUETOOTH/Network standby mode automatically due to the auto standby function if no operation is performed and no sound is input for about 15 minutes. Refer to Help Guide for details about the auto standby function.

To check Wi-Fi signal strength (reception sensitivity)

While the unit is connected to the Wi-Fi network, tap and hold the NETWORK button until you hear a beep.

No sound/low sound level



Check that both the unit and connected

device are turned on.

 Turn up the volume of the unit and the

connected device.

 Check that the connected device is being

played back.

Note

3 ······ 2 ······ 1 ······ 0 ······

Signal

strength

Number of flashing function indicators

Flashing stops when any button is tapped. To receive a stronger signal, try the following:

 Change the direction of the Wi-Fi

antenna.

 Turn off other wireless devices.

To use the BLUETOOTH/Network standby function

If the BLUETOOTH/Network standby function is on, the unit turns on automatically by operating a BLUETOOTH device or network device, even if the unit is turned off. The unit will start up more quickly than usual.

Check that the AC adaptor is connected,

then turn on the unit.

Press and hold the / (on/standby)

button until it lights up in orange.

The unit turns off and enters the BLUETOOTH/Network standby mode. If you operate a BLUETOOTH device or network device, the unit turns on automatically and connection starts.

The unit will turn off. Settings will return to their factory defaults, and all BLUETOOTH pairing information and network settings will be reset.

If you initialize the unit, the unit may not be able to connect your iPhone/iPad/iPod or PC. In this case, erase the pairing information on the iPhone/iPad/ iPod or PC, and then perform the pairing procedure again.

 Refer to Help Guide for symptoms other than

the above.

http://rd1.sony.net/help/speaker/srs-x77/h_zz/

Additional information

To initialize the unit

Initialize the unit if these measures do not resolve the problem or if the settings fail.

Make sure the unit is turned on. Tap

(press) and hold both the VOL (volume)

– button and / (on/standby) button at

the same time for more than 5 seconds.

What is BLUETOOTH wireless technology?

BLUETOOTH wireless technology is a shortrange wireless technology that enables wireless data communication between digital devices, such as a computer and digital camera. BLUETOOTH wireless technology operates within a range of about 10m (about 30ft). Connecting two devices as necessary is common, but some devices can be connected to multiple devices at the same time. You do not need to use a cable for connection, nor is it necessary for the devices to face one another, such is the case with infrared technology. For example, you can use such a device in a bag or pocket. BLUETOOTH standard is an international standard supported by thousands of companies all over the world, and employed by various companies worldwide.

Maximum communication range

Maximum communication range may shorten under the following conditions.

 There is an obstacle such as a person,

metal, or wall between the system and BLUETOOTH device.

 A wireless LAN device is in use near the

system.

 A microwave oven is in use near the

system.

 A device that generates

electromagnetic radiation is in use near the system.

Interference from other devices

Because BLUETOOTH devices and wireless LAN (IEEE802.11b/g/n) use the same frequency, microwave interference may occur and resulting in communication speed deterioration, noise, or invalid connection if the system is used near a wireless LAN device. In such a case, perform the following.

 Use the system at least 10 m (about 30

ft) away from the wireless LAN device.

 If the system is used within 10 m (about

30 ft) of a wireless LAN device, turn off the wireless LAN device.

Interference to other devices

Microwaves emitting from a BLUETOOTH device may affect the operation of electronic medical devices. Turn off the system and other BLUETOOTH devices in the following locations, as it may cause an accident.

 where inflammable gas is present, in a

hospital, train, airplane, or a gas station

 near automatic doors or a fire alarm

 To be able to use the BLUETOOTH function, the

BLUETOOTH device to be connected requires the same profile as the system’s. Note also that even if the same profile exists, devices may vary in function depending on their specifications.

 Due to the characteristic of BLUETOOTH wireless

technology, the sound played on the system is slightly delayed from the sound played on the BLUETOOTH device during talking on the telephone or listening to the music.

 This system supports security capabilities that

comply with the BLUETOOTH standard to provide a secure connection when the BLUETOOTH wireless technology is used, but security may not be enough depending on the setting. Be careful when communicating using BLUETOOTH wireless technology.

 We do not take any responsibility for the leakage

of information during BLUETOOTH communication.

 A device featuring the BLUETOOTH function is

required to conform to the BLUETOOTH standard specified by Bluetooth SIG, and be authenticated. Even if the connected device conforms to the above mentioned BLUETOOTH standard, some devices may not be connected or work correctly, depending on the features or specifications of the device.

 Noise or sound skips may occur depending on

the BLUETOOTH device connected with the system, the communication environment or the usage environment.

Specifications

Section for Speaker

Speakers

Full range speaker: Approx. 46 mm (1 7/8 inches) diameter × 2 / Subwoofer: Approx. 62 mm (2 diameter × 1

Section for Amplifier

POWER OUTPUT AND TOTAL HARMO NIC DISTORTION: Power Output (reference)

Using AC adaptor

Full range speaker: 10W+10W (at 1% harmonic distortion, 1 kHz, 8 Ω) Subwoofer: 20W (at 1% harmonic distortion, 100 Hz, 4 Ω)

Using battery

Full range speaker: 6W+6W (at 1% harmonic distortion, 1 kHz, 8 Ω) Subwoofer: 12W (at 1% harmonic distortion, 100 Hz, 4 Ω)

Section for Network

Compati ble standards

IEEE 802.11 a/b/g/n (WEP 64 bit, WEP 128 bit, WPA/WPA2-PSK (AES), WPA/ WPA2-PSK (TKIP))

Radio frequency

2.4/5 GHz band

Section for BLUETOOTH

Output

BLUETOOTH Specification Power Class 2

Maximum communication range

Line of sight Approx. 10 m (about 30 ft)*

Radio frequency

2.4 GHz band (2.4000 GHz – 2.4835 GHz)

Communication System

BLUETOOTH Specification Version 3.0

Compatible BLUETOOTH Profiles*

A2DP (Advanced Audio Distribution Profile)/AVRCP (Audio Video Remote Control Profile)

/8 inches)

Supported codec*

SBC*4/AAC*5/LDAC*

Transmission bandwidth (A2DP)

20 Hz – 20,000 Hz (with 44.1 kHz sampling)

*1The actual range will vary depending on factors

such as obstacles between devices, magnetic fields around a microwave oven, static electricity, reception sensitivity, aerial’s performance, operating system, software application, etc.

BLUETOOTH standard profiles indicate the purpose of BLUETOOTH communication between devices.

Codec: Audio signal compression and conversion format

Subband Codec

Advanced Audio Coding

LDAC is an audio coding technology developed by Sony that enables the transmission of HighResolution (Hi-Res) Audio content, even over a BLUETOOTH connection. Unlike other BLUETOOTH compatible coding technologies such as SBC, it operates without any downconversion of the Hi-Res Audio content and allows approximately three times more

data

than those other technologies to be transmitted over a BLUETOOTH wireless network with unprecedented sound quality, by means of efficient coding and optimized packetization.

Excluding DSD format contents.

In comparison with SBC (Subband Coding) when the bitrate of 990 kbps (96/48 kHz) or 909 kbps (88.2/44.1 kHz) is selected.

General

AUDIO IN

ANALOG Φ 3.5 mm stereo mini jack

Network port

10BASE-T/100BASE-TX (Auto Polarity)

DC OUT

USB jack Type A (for charging the battery of a connected device) (5 V, Max. 1.5 A: labeled on bottom of system)

Power

DC 18V (using the supplied AC adaptor connected to AC 100V-240V, 50Hz/60Hz power supply) or, using built in lithium-ion battery

Additional information

Usage life of lithium-ion battery (when the

Note

NETWORK OFF/ON switch is OFF)

Approx. 10 hours*

Usage life of lithium-ion battery (when the NETWORK OFF/ON switch is ON)

Approx. 3 hours*

*1When the specified music source is used, the

BLUETOOTH device is set to the maximum volume, and the volume level of this unit is set to 7. When the NETWORK OFF/ON switch is OFF: If the volume level of the unit is set to maximum, the usage life will be shortened by 80%. When the NETWORK OFF/ON switch is ON If the volume level of the unit is set to maximum, the usage life will be shortened by 50%.

Operating temperature

5 °C to 35 °C (41 °F to 95 °F)

Dimensions (w/h/d) (including projecting parts and controls)

Approx. 300 mm × 132 mm × 60 mm (11 7/8 inches × 5

/8 inches × 2 3/8 inches)

Mass

Approx. 1.9kg (4 lb 3 oz)

Supplied accessories:

AC power cord (1) AC adaptor (AC-E1826L) (1) Wi-Fi Startup Guide Operating Instructions, Warranty card (this document) Warranty card (for customers in Canada) (1)

Design and specifications are subject to change without notice.

Compatible models

iPad mini 3*  iPad Air*  iPad mini 2* 

iPad (4th generation)*

iPad mini* 

iPad (3rd generation)*

iPad 2*  iPad* 

iPod touch (5th generation)

iPod touch (4th generation)

iPod touch (3rd generation)*

iPod nano (7th generation)*

* SongPal does not support iPod touch (3rd

generation) and iPod nano. SongPal, as of January 2015, does not support the display optimized for iPad screen.

AirPlay BLUETOOTH





AirPlay works with iPhone, iPad, and iPod touch with iOS 4.3.3 or later, Mac with OS X Mountain Lion or later, and Mac and PC with iTunes 10.2.2 or later.

Compatible iPhone/iPad/iPod models

Compatible models

iPhone 6 Plus  iPhone 6  iPhone 5s  iPhone 5c  iPhone 5  iPhone 4s  iPhone 4  iPhone 3GS  iPad Air 2* 

AirPlay BLUETOOTH

Sony cannot accept responsibility in the event that data recorded to iPhone/iPad/iPod is lost or damaged when using your iPhone/iPad/iPod connected to this unit.

+ 58 hidden pages