Sony SRS-D4K User Manual
Active Speaker System
SRS-D4K
3-753-738-21 (2)
Operating Instructions
Before operating the unit, please read this manual
thoroughly and retain it for future reference.
Table of Contents
Features
Precautions
Locsftion of Parts apd Corrtrols
Cc^nections
Howto Use.........
.............................................
................................................... g
............
.1
.....................................
.
..............................
............
g
^
9
0
Bedcoover
© 1991 by Sony Corporation
Owner’s Record
Features
The model and serial numbers are located at the rear. Record
the serial number in the space provided below. Refer to them
whenever you call upon your Sony dealer regarding this
product.
Model No. SRS-D4K Serial No..
To prevent fire or shock hazard, do not ex
pose the unit to rain or moisture.
The Sony SRS-D4K is a 3D speaker system composed of a
woofer unit equipped with an amplifier (SRS-D4) and full range
speakers (SRS-004). The system can be connected to a
Discman, Walkman*, a CD player, cassette-deck or video
deck, TV, etc., and provide the natural and powerful sound
output; 20 watts of bass sound, 5 watts + 5 watts of full range
sound, and 30 watts total. (Peak music power outputs of 34
watts of bass sound, 8 watts 8 watts of full range, 50 watts
total).
The SRS-^ amplifier/Woofer
•You can select the input signal from two audio equipment with
one-touch operation.
•You can adjust the bass level and the overall sound level.
•The magnetically shielded unit has little effect on a TV screen
or recorded te^ies, etc., even when it is placed near the units.
The SRS-004 compact full-range speakers
•The full-range speakers are light, compact and magnetically
shielded. You can hang them on the wall.
•You can also use the SRS-004 as additional speakers for TV.
* WALKMAN IS a trademark of Sony Corporation.
This symbol Is intended to alert the
user to the presence of uninsulated
“dangerous voltage” within the prod
uct’s enclosure that may be of suffi
cient magnitude to constitute a risk of
electric shock to persons.
This symbol is intended to alert the
user to the presence of important
operating and maintenance (servicing)
instructions in the literature accompa
nying the appliance.
Precautions
On operating voltage
Operate the unit only on 120V AC, 60Hz.
On safety
•The nameplate indicating operating voltage, power
consumption, etc. is located on the rear exterior.
•Unplug the unit from the wall outlet when it is not to be used
for an extended period of time. To disconnect the cord, pull it
out by grasping the plug. Never pull it out by the cord.
•Should any solid object or liquid fall into the unit, disconnect
the AC power cord, and have the unit checked by qualified
personnel before operating it any further.
On installation
•Do not leave the unit in a location near heat sources,
moisture, rain or mechanical shock.
•Although this speaker system is magnetically shielded, do not
leave recorded tapes, watches, personal cr^it cards or floppy
disks using magnetic coding in front of the unit for an
extended period for precaution.
•If the unit should cause the TV screen to have poor color,
place the unit at a distance away from the TV.
On cleaning the cabinet
Clean the cabinet with a soft doth slightly moistened with watei
or mild detergent solution. Do not use alcohol, benzine or
thinner as they may mar the finish.
If you have any question or problem concerning your unit that
is not covered in this manual, please consult the nearest Sony
dealer.
Location of Parts and Controls
SRS-D4 woofer/amplifier
Power cord
-INPUT 1 (L,R)/INPUT 2 (L.R)
(phono plugs)
■ SPEAKER terminals
Rear
Connections
Before connecting speakers
Be certain that the POWER switch is set to STANDBY
(POWER lamp is off).
^tlorinei^ons to №è Audio Equipment
•You can connect two kinds of audio equipment to the INPUT
1 and INPUT 2 jacks of the woofer/amplifier simultaneously.
To select the audio equipment, press the INPUT SELECT
switch on the front panel.
•When you connect phono-jack line outputs to phono jack
inputs, be sure to connect the right-chanriel output of the
Use the connectirtg cord supplied for the connection below.
To connect phono jack outputs
of the audio equipment
Connecting cord (supplied)
to line outputs
audio equipment to the R INPUT of the woofer/amplifier, and
the left-channel output to the L INPUT.
•When you connect the front panel INPUT 1, the equipment
connected to the rear panel INPUT 1 (phono jacks) cannot
play.
CD player, cassette-deck, video deck,
TV monitor, etc.
Loading...