Sony Alpha 68, SLT-A68 User Guide

4-590-091-31(1)

ILCA-68

A-mount

Interchangeable Lens Digital Camera/Instruction Manual GB

Appareil photo à objectif interchangeable/Mode d’emploi FR

Digitalkamera mit Wechselobjektiv/Gebrauchsanleitung DE

Cámara Digital de Lentes Intercambiables/Manual de instrucciones ES

Fotocamera digitale con obiettivo intercambiabile/Istruzioni per l’uso IT

Câmara Digital de Objetivas intercambiáveis/Manual de instruções PT

Digitale camera met verwisselbare lens/Gebruiksaanwijzing NL

Цифровой фотоаппарат со сменным объективом/Инструкция по эксплуатации

Цифровий фотоапарат зі змінним об'єктивом/Посібник з експлуатації

Digitalkamera med utbytbart objektiv/Handledning SE

Digitaalinen kamera vaihdettavalla objektiivilla/Käyttöopas FI

Digitalkamera med utskiftbart objektiv/Bruksanvisning NO

Digitalkamera med udskifteligt objektiv/Betjeningsvejledning DK

“Help Guide” (Web manual)

Refer to “Help Guide” for in-depth instructions on the many functions of the camera.

« Manuel d’aide » (Manuel en ligne)

Consultez le « Manuel d’aide » pour obtenir des instructions détaillées au sujet des nombreuses fonctions de l'appareil.

http://rd1.sony.net/help/ilc/1610/h_zz/

English

A-mount

Learning more about the camera (“Help Guide”)

“Help Guide” is an on-line manual. You can read the “Help Guide” on your computer or smartphone. Refer to it for in-depth instructions on the many functions of the camera.

URL:

http://rd1.sony.net/help/ilc/1610/ h_zz/

Owner’s Record

Record the model and serial number (which are located on the product) in the space provided below. Refer to these numbers whenever you call your Sony dealer regarding this product. Model No. ILCASerial No.

WARNING

To reduce fire or shock hazard, do not expose the unit to rain or moisture.

IMPORTANT SAFETY INSTRUCTIONS

-SAVE THESE INSTRUCTIONS DANGER TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS

If the shape of the plug does not fit the power outlet, use an attachment plug adaptor of the proper configuration for the power outlet.

CAUTION

(A) (B)

Battery pack

If the battery pack is mishandled, the battery pack can burst, cause a fire or even chemical burns. Observe the following cautions.

• Do not disassemble.

• Do not crush and do not expose the battery pack to any shock or force such as hammering, dropping or stepping on it.

• Do not short circuit and do not allow metal objects to come into contact with the battery terminals.

• Do not expose to high temperature above 60°C (140°F) such as in direct sunlight or in a car parked in the sun.

• Do not incinerate or dispose of in fire.

• Do not handle damaged or leaking lithium ion batteries.

• Be sure to charge the battery pack using a genuine Sony battery charger or a device that can charge the battery pack.

• Keep the battery pack out of the reach of small children.

• Keep the battery pack dry.

• Replace only with the same or equivalent type recommended by Sony.

• Dispose of used battery packs promptly as described in the instructions.

Use a nearby wall outlet (wall socket) when using the supplied or recommended AC Adaptor/battery charger. If any malfunction occurs while using this product, disconnect the plug from the wall outlet (wall socket) immediately to disconnect from the power source. If you use the product with a charge lamp, note that the product is not disconnected from the power source even when the lamp turns off.

Power Cord

For the customers in the UK, Ireland, Malta, Cyprus and Saudi Arabia Use the power cord (A). For safety reasons, the power cord (B) is not intended for above countries/regions and shall therefore not be used there. For the customers in other EU countries/ regions Use the power cord (B).

Notice

If static electricity or electromagnetism causes data transfer to discontinue midway (fail), restart the application or disconnect and connect the communication cable (USB, etc.) again.

This product has been tested and found compliant with the limits set out in the EMC regulation for using connection cables shorter than 3 meters (9.8 feet).

The electromagnetic fields at the specific frequencies may influence the picture and sound of this unit.

For Customers in the U.S.A. and Canada

RECYCLING LITHIUM-ION BATTERIES

Lithium-Ion batteries are recyclable. You can help preserve our environment by returning your used rechargeable batteries to the collection and recycling location nearest you.

For more information regarding recycling of rechargeable batteries, call toll free 1-800-822-8837, or visit http://www.call2recycle.org/

Caution: Do not handle damaged or leaking Lithium-Ion batteries.

For supplied accessories

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

CAN ICES-3 B/NMB-3 B

For Customers in the U.S.A.

If you have any questions about this product, you may call:

Sony Customer Information Center

1-800-222-SONY (7669). The number below is for the FCC related matters only.

Regulatory Information

Declaration of Conformity

Trade Name: SONY Model No.: ILCA-68 Responsible Party: Sony Electronics Inc. Address: 16535 Via Esprillo,

Telephone No.: 858-942-2230

This device complies with Part15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

CAUTION

You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.

San Diego, CA 92127 U.S.A.

Note:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving

antenna.

– Increase the separation between the

equipment and receiver.

– Connect the equipment into an outlet on a

circuit different from that to which the receiver is connected.

– Consult the dealer or an experienced

radio/TV technician for help.

The supplied interface cable must be used with the equipment in order to comply with the limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules.

For Customers in Europe

Notice for the customers in the countries applying EU Directives

Manufacturer: Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan For EU product compliance: Sony Belgium, bijkantoor van Sony Europe Limited, Da Vincilaan 7-D1, 1935 Zaventem, Belgium

Disposal of waste batteries and electrical and electronic equipment (applicable in the European Union and other European countries with separate collection systems)

certain batteries this symbol might be used in combination with a chemical symbol. The chemical symbols for mercury (Hg) or lead (Pb) are added if the battery contains more than 0.0005% mercury or 0.004% lead. By ensuring these products and batteries are disposed of correctly, you will help prevent potentially negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling. The recycling of the materials will help to conserve natural resources.

This symbol on the product, the battery or on the packaging indicates that the product and the battery shall not be treated as household waste. On

In case of products that for safety, performance or data integrity reasons require a permanent connection with an incorporated battery, this battery should be replaced by qualified service staff only. To ensure that the battery and the electrical and electronic equipment will be treated properly, hand over these products at endof-life to the applicable collection point for the recycling of electrical and electronic equipment. For all other batteries, please view the section on how to remove the battery from the product safely. Hand the battery over to the applicable collection point for the recycling of waste batteries. For more detailed information about recycling of this product or battery, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product or battery.

For Customers in India

Battery Pack

Self Declaration –Conforming to IS 16046:2012, R-41022780

This manual covers several models supplied with different lenses. The model name varies depending on the supplied lens. The available model varies depending on the countries/regions.

Model name Lens

ILCA-68 Not supplied ILCA-68K Supplied (DT 18-55 mm zoom lens)

Before use

Notes on using your camera

Screen language

You can select the language displayed on the screen using the menu.

Shooting procedure

This camera has 2 modes for monitoring subjects: the monitor mode using the monitor, and the viewfinder mode using the viewfinder.

Functions built into this camera

This manual describes 1080 60i-compatible devices and 1080 50i-compatible devices.

Creating an image database file

If you insert a memory card that does not contain an image database file into the camera and turn on the power, the camera automatically creates an image database file using some of the memory card’s capacity. The process may take a long time and you cannot operate the camera until the process is completed. If a database file error occurs, export all images to your computer using PlayMemories Home™, and then format the memory card using the camera.

No compensation for damaged content or recording failure

Sony cannot compensate for failure to record or loss or damage of recorded content due to a malfunction of the camera or recording media, etc.

Back up recommendation

To avoid the data loss, always copy (back up) data to other media.

Notes on the monitor, electronic viewfinder, lens, and image sensor

• The monitor and electronic viewfinder are manufactured using extremely highprecision technology, and over 99.99% of the pixels are operational for effective use. However, there may be some small black dots and/or bright dots (white, red, blue or green in color) that constantly appear on the monitor and electronic viewfinder. These dots are normal due to the manufacturing process and do not affect the images in any way.

• Do not hold the camera by the monitor.

• Do not expose the camera to sunlight or shoot sunward for a long time. The internal mechanism may be damaged. If sunlight is focused on a nearby object, it may cause a fire.

• Do not directly expose the lens to beams such as laser beams. That may damage the image sensor and cause the camera to malfunction.

• Images may trail across on the screen in a cold location. This is not a malfunction. When turning on the camera in a cold location, the screen may become temporarily dark. When the camera warms up, the screen will function normally.

• The recorded image may be different from the image you monitored before recording.

Notes on shooting with the viewfinder

This camera is equipped with an Organic Electro-Luminescence viewfinder with high resolution and high contrast. This viewfinder achieves a wide viewing angle and a long eye relief. This camera is designed to provide an easily viewable viewfinder by appropriately balancing various elements.

• The image may be slightly distorted near the corners of the viewfinder. This is not a malfunction. When you want to see the full composition with all its details, you can also use the monitor.

• If you pan the camera while looking into the viewfinder or move your eyes around, the image in the viewfinder may be distorted or the color of the image may change. This is a characteristic of the lens or display device and is not a malfunction. When you shoot an image, we recommend that you look at the center area of the viewfinder.

• When shooting with the viewfinder, you may experience symptoms such as eyestrain, fatigue, travel sickness, or nausea. We recommend that you take a break at regular intervals when you are shooting with the viewfinder. The required length or frequency of the break may differ depending on the individuals, so you are advised to decide at your own discretion. In case you may feel uncomfortable, refrain from using the viewfinder until your condition recovers, and consult your doctor as necessary.

Notes on using your camera

Notes on recording for long periods of time

• Depending on the camera and battery temperature, you may be unable to record movies or the power may turn off automatically to protect the camera. A message will be displayed on the screen before the power turns off or you can no longer record movies. In this case, leave the power off and wait until the camera and battery temperature goes down. If you turn on the power without letting the camera and battery cool enough, the power may turn off again or you may be unable to record movies.

• Under high ambient temperatures, the temperature of the camera rises quickly.

• When the temperature of the camera rises, the image quality may deteriorate. It is recommended that you wait until the temperature of the camera drops before continuing to shoot.

• The surface of the camera may get warm. This is not a malfunction.

Notes on importing XAVC S movies and AVCHD movies to a computer

When importing XAVC S movies or AVCHD movies to a computer, download and use the software PlayMemories Home from the following website: http://www.sony.net/pm/

Notes on the flash

• Do not carry the camera by the flash unit, or use excessive force on it.

• If water, dust or sand get into the open flash unit, it may cause a malfunction.

• Be sure to keep your fingers out of the way when you press the flash down.

Notes when playing movies on other devices

• Movies recorded with this camera may not be played back correctly on other devices. Also, movies recorded with other devices may not be played back correctly on this camera.

• Discs created from AVCHD movies recorded by this camera can be played back only on AVCHD-compatible devices. DVD players or recorders cannot play back discs created from AVCHD movies, as they are incompatible with the AVCHD format. Also, DVD players or recorders may fail to eject HD discs recorded in AVCHD format.

• Movies recorded in 1080 60p/1080 50p format can be played back only on 1080 60p/1080 50p-supported devices.

• Movies recorded in XAVC S format can be played back only on XAVC Ssupported devices.

Warning on copyright

Television programs, films, videotapes, and other materials may be copyrighted. Unauthorized recording of such materials may be contrary to the provisions of the copyright laws.

The pictures used in this manual

The photographs used as examples of pictures in this manual are reproduced images, and are not actual images shot using this camera.

Notes on using your camera

On the data specifications described in this manual

The data on performance and specifications are defined under the following conditions, except as described in this manual: at an ordinary ambient temperature of 25ºC (77°F), and using a battery pack that has been fully charged until the CHARGE lamp has turned off.

Before use

Checking the supplied items

First check the model name of your camera (page 6). The accessories supplied differ depending on the model. The number in parentheses indicates the number of pieces.

Supplied with all models:

• Camera (1)

• Battery charger BC-VM10A (1)

• Power cord (mains lead) (1)* (supplied in some countries/ regions)

* Multiple power cords may be supplied

with your camera. Use the appropriate one that matches your country/region. See page 3.

• Rechargeable battery pack NPFM500H (1)

• Micro USB cable (1)

• Shoulder strap (1)

For how to attach the shoulder strap to the camera, refer to page 15.

• Body cap (1) (Attached on the camera)

• Eyepiece Cup (1) (Attached on the camera)

• Instruction Manual (1) (this manual)

ILCA-68K:

• DT 18-55 mm zoom lens (1)/ Front lens cap (1)/Packaging lid (1)

Identifying parts

See the pages in parentheses for details on operation for the parts.

Front side

A Shutter button (30) B Power switch (28) C Control dial (17) D Self-timer lamp E Lens contacts* F Mirror* G Preview button H Mount I Built-in flash*

• Press the (Flash pop-up) button to use the flash.

• When not using the flash, press it back into the camera body.

J Microphone*

K Mode dial lock release button

(30, 35)

L Mode dial (35) M (Flash pop-up) button N Mounting index (26) O Lens release button (27) P Focus mode switch

*1 Do not directly touch these parts. *2 Do not cover this part during movie

recording. Doing so may cause noise or lower the volume.

Rear side

Identifying parts

A Eyepiece cup B Eye sensor C MENU button (19) D Viewfinder*

• When you look into the viewfinder, the viewfinder mode is activated, and when you take your face away from the viewfinder, the screen mode returns to the monitor mode.

E Diopter-adjustment dial

• Adjust the diopter-adjustment dial according to your eyesight until the display appears clearly in the viewfinder.

F Monitor G MOVIE button (32) H For shooting: C1 (Custom 1)

button For viewing: (Enlarge) button

I For shooting: AEL (AE lock)

button/SLOW SYNC button For viewing: (Image index) button

J Control wheel (17)

K For shooting: Fn (Function)

button (18) For viewing: (Image rotation) button

L C2 (Custom 2) button

For viewing: (Delete) button (34)

M (Playback) button (33)

* Do not directly touch this part.

Identifying parts

Top side

Identifying parts

A Multi interface shoe* B FINDER/MONITOR button C Display panel D (Drive mode) button E WB (White balance) button F (Exposure compensation)

button

G ISO button H (Display panel

illumination) button

I Image sensor position

mark

* For details on compatible accessories

of the Multi interface shoe, visit the Sony website in your area, or consult your Sony dealer or local authorized Sony service facility. Accessories for the Accessory Shoe can also be used. Operations with other manufactures’ accessories are not guaranteed.

Sides/Bottom

Identifying parts

A Hooks for shoulder strap

• Attach both ends of the strap onto the camera.

B Microphone jack

• When an external microphone is connected, the internal microphone is turned off automatically. When the external microphone is a plugin-power type, the power of the microphone is supplied by the camera.

C Speaker D DC IN terminal

• When connecting the ACPW10AM AC Adaptor (sold separately) to the camera, turn the camera off, then plug the connector of the AC Adaptor to the DC IN terminal on the camera.

E HDMI micro jack F Multi/Micro USB Terminal*

• Supports Micro USB compatible device.

G Memory card insertion slot (23) H Memory card cover (23) I Access lamp J Battery insertion slot (23) K Battery cover (23)

L Tripod socket hole

• Use a tripod with a screw less than 5.5 mm (7/32 inches) long. Otherwise, you cannot firmly secure the camera, and damage to the camera may occur.

* For details on compatible accessories

for the Multi/Micro USB Terminal, visit the Sony website, or consult your Sony dealer or local authorized Sony service facility.

Identifying parts

Lens

DT 18-55mm F3.5-5.6 SAM II (Supplied with the ILCA-68K)

A Focusing ring B Zoom ring C Focal-length scale D Focal-length index E Lens contacts* F Focusing mode switch G Mounting index

* Do not directly touch this part.

• The DT 18-55mm F3.5-5.6 SAM II is designed for Sony A-mount cameras (models equipped with an APS-C sized image sensor). You cannot use these lenses on 35mm-format cameras.

• For the lenses other than DT 1855mm F3.5-5.6 SAM II, refer to the operating instructions supplied with the lens.

Functions list

Operating the camera

How to use the control wheel

• You can turn the control wheel or press up/down/left/right on the control wheel to move the selection frame. Press z in the center of the control wheel to set the selected item. In this manual, the action of pressing the up/down/left/right side of the control wheel is indicated by v/V/b/B.

• When you turn the control wheel or press b/B on the control wheel in playback mode, you can display the previous or next image.

• DISP function is assigned to v on the control wheel. You can change the screen display with this function.

• [Standard] is assigned to z in the center of the control wheel in the default settings. When you press z, the autofocus function is activated and the camera focuses on the subjects in the central area of the monitor.

How to use the control dial

You can turn the control dial to change the settings required for each shooting mode with immediate effect.

Selecting a function using the Fn (Function) button

This button is used for setting up or executing functions used frequently in shooting, except for functions from the Quick Navi screen. The displayed contents and their position shown below are just a guideline, and may differ from the actual display.

1 Press DISP on the control wheel to set the screen mode to other

than [For viewfinder].

2 Press the Fn button.

3 Select the desired item using v/V/b/B on the control wheel.

The setting screen appears.

4 Select the desired setting by

turning the control wheel, then press z on the control wheel.

• Some setting values can be finely adjusted by turning the control dial.

To set the individual settings in the dedicated screen

In step 3, select a setting item and press z on the control wheel to switch to the dedicated screen for the setting item. Set the items according to the Operation guide.

Operation guide

Functions that can be selected using the MENU button

You can set up the basic settings for the camera as a whole, or execute functions such as shooting, playback, or other operations.

1 Press MENU button to display the menu screen. 2 Select the desired setting item using

v/V/b/B on the control wheel or by turning the control wheel, and then press z on the center of the control wheel.

• Select an icon at the top of the screen and

3 Select the setting value, then press z to confirm.

To display the Tile Menu

Allows you to select whether to always display the first screen of the menu when you press the MENU button.

MENU t (Setup) t [Tile Menu] t [On]

b/B on the control wheel to

press the move to another MENU item.

Using the In-Camera Guide

You can use [Custom Key Settings] to assign In-Camera Guide to the desired button. The In-Camera Guide displays explanations for the currently selected menu function or setting.

MENU button t (Custom Settings) t [Custom Key Settings] t Select the desired button assigned to the function. t [In-

Camera Guide]

Press the MENU button and use the control wheel to select a MENU item whose explanation you want to read, and then press the button to which [In-Camera Guide] is assigned.

Preparing the camera

Charging the battery pack

When using the camera for the first time, be sure to charge the NP-FM500H InfoLITHIUM™ battery pack (supplied). The InfoLITHIUM battery pack can be charged even when it has not been fully depleted. It can also be used when it has not been fully charged. The charged battery pack is discharged little by little, even when you do not use it. To avoid missing an opportunity to shoot, charge the battery pack again before shooting.

1 Insert the battery pack into the

battery charger.

Push the battery pack until it clicks.

Charging the battery pack

2 Connect the battery charger to the

wall outlet (wall socket).

• How to connect the battery charger

With the battery charger that can be connected to the wall outlet (wall socket) directly

may differ depending on the country/ region.

Light on: Charging Light off: Charge completed

Charging time (Full charge)

Approx. 175 minutes

• When charging a fully depleted battery pack at a temperature of 25°C (77°F).

• The CHARGE lamp turns off when charging is completed.

Notes

• The charging time differs depending on the remaining capacity of the battery pack or charging conditions.

• Be sure to use only genuine Sony brand battery packs.

• We recommend charging the battery pack in an ambient temperature of between 10°C to 30°C (50°F to 86°F). You may not be able to efficiently charge the battery pack outside this temperature range.

• Connect the battery charger to the nearest wall outlet (wall socket).

CHARGE lamp

With the battery charger that requires the power cord to connect to the wall outlet (wall socket)

CHARGE lamp

To a wall outlet (wall socket)

Inserting the battery pack/memory card (sold separately)

1 While sliding the battery cover

open lever, open the cover.

2 Firmly insert the battery pack all

the way while pressing the lock lever with the tip of the battery.

Lock lever

3 Close the cover.

4 Slide the memory card cover to

open it.

Inserting the battery pack/memory card (sold separately)

5 Insert a memory card.

• With the notched corner facing as illustrated, insert the memory card until it clicks into place.

Ensure the notched corner faces correctly

6 Close the cover.

To remove the battery pack

Turn off the camera and slide the lock lever in the direction of the arrow. Be careful not to drop the battery pack.

Lock lever

To remove the memory card

Check that the access lamp (page 15) is not lit, then open the cover, and push the memory card once.

To check the remaining battery level

The supplied battery pack is a lithium-ion battery pack that has functions for exchanging information related to operating conditions with your camera. The percentage of the remaining battery life is displayed according to the operating conditions of your camera.

Inserting the battery pack/memory card (sold separately)

“Battery

Battery level

High Low

exhausted.”

You cannot shoot any more pictures.

Memory cards that can be used

Memory card

Memory Stick PRO Duo

For still images

(Mark2 only) (Mark2 only)

Memory Stick PRO-HG Duo™

Memory Stick Micro™ (M2)

(Mark2 only) (Mark2 only) SD memory card SDHC memory card SDXC memory card microSD memory card microSDHC memory card microSDXC memory card

*1 SD Speed Class 4: or faster, or UHS Speed Class 1: or faster *2 Memory cards that fulfill all of the following conditions:

– Capacity of 4 GB or more – SD Speed Class 10: , or UHS Speed Class 1: or faster

• For details on the number of recordable still images and recordable duration of movies, refer to pages 41 to 43. Check the tables to select a memory card with the desired capacity.

Notes

• When an SDHC memory card is used to record XAVC S movies over extended periods of time, the recorded movies will be divided into files of 4 GB. The divided files can be integrated into a single file using PlayMemories Home.

• Not all memory cards are guaranteed to operate correctly. For memory cards produced by manufacturers other than Sony, consult the manufacturers of the products.

• When using Memory Stick Micro media or microSD memory cards with this camera, make sure to use with the appropriate adaptor.

For movies

MP4 AVCHD XAVC S

—

*1 *1

*1 *1 *2

*1 *1

*1 *1 *2

—

Attaching a lens

Set the power switch of the camera to OFF before you attach or remove the lens.

1 Remove the body cap from the

camera and the packaging lid from the rear of the lens.

• When changing the lens, change the lens quickly somewhere away from dusty locations to keep dust or debris from getting inside the camera.

• When shooting, remove the front lens cap from the front of the lens.

2 Mount the lens by aligning the

orange index marks (mounting indexes) on the lens and camera.

• Hold the camera with the lens facing down to prevent dust from entering into the camera.

3 While pushing the lens lightly

toward the camera, turn the lens clockwise until it clicks into the locked position.

• Be sure to put the lens on straight.

Front lens cap

Body cap

Packaging lid

Orange index marks

Attaching a lens

Notes

• When attaching a lens, do not press the lens release button.

• Do not use force when attaching a lens.

• E-mount lenses are not compatible with this camera.

• When you use a lens for which a tripod socket is provided, attach the lens onto the tripod using the tripod socket provided to help balance the weight of the lens.

• When carrying the camera with a lens attached, hold both the camera and the lens firmly.

• Do not hold the part of the lens that is extended for the zoom or focus adjustment.

To remove the lens

1 Press the lens release button all

the way in and turn the lens counterclockwise until it stops.

Lens release button

2 Attach the caps to the front and rear of the lens and the body

cap to the camera.

• Before you attach them, remove any dust from them.

• A rear lens cap is not supplied with the DT 18-55mm F3.5-5.6 SAM II Lens Kit. If storing the lens without attaching it to the camera, purchase Rear Lens Cap ALC-R55.

Notes on changing the lens

When changing the lens, if dust or debris gets inside the camera and adheres to the surface of the image sensor (the part that converts the light to an electric signal), it may appear as dark spots on the image, depending on the shooting environment. The camera is equipped with an anti-dust function to prevent dust from landing on the image sensor. However, always make sure to change the lens quickly somewhere away from dusty locations when attaching/ removing a lens.

Setting the date and time

When you turn on the camera for the first time or after you initialize the functions, the screen to set the date and time appears.

1 Set the power switch to ON to turn

on the camera.

The screen to set the date and time appears.

• To turn the camera off, set the power switch to OFF.

2 Check that [Enter] is selected on

the screen, then press z on the control wheel.

3 Select a desired geographic location, and then press z. 4 Select a setting item by using v/V on the control wheel, then

press z.

5 Select a desired setting by using v/V/b/B, then press z. 6 Repeat steps 4 and 5 to set other items, then select [Enter] and

press z.

To cancel the date and time setting operation

Press the MENU button.

Setting the date and time

Checking or resetting the date/time and area

The date and time setup screen appears automatically when the power is turned on for the first time or when the internal rechargeable backup battery has been discharged. To reset the date and time, use the menu.

MENU button t (Setup) t [Date/Time Setup] or [Area Setting]

MENU button

Maintaining the date and time setting

This camera has an internal rechargeable battery for maintaining the date and time and other settings regardless of whether the power is on or off, or the battery is installed or not.

Shooting and viewing images

Shooting still images

In auto mode, the camera analyzes the subject and allows you to shoot with the appropriate settings.

1 Set the power switch to ON to turn on the camera. 2 Set the mode dial to (Auto

Mode).

• Turn the mode dial while pressing the mode dial lock release button on the center of the mode dial.

3 Look into the viewfinder and hold

the camera.

When using a zoom lens, adjust the zoom ring to the proper size of the subject.

4 Press the shutter button halfway down to focus.

• When the image is in focus, a beep sounds and the z or indicator lights.

5 Press the shutter button fully

down to shoot an image.

• If [Auto Obj. Framing] is set to [Auto], when shooting faces, close-up (macro) subjects, or subjects tracked by [Lockon AF], the camera analyzes the scene and automatically trims the captured image into a suitable composition. Both the original and the trimmed images will be saved.

Zoom ring

+ 621 hidden pages