SONY SA-VE312 User Manual [fr]
Micro Satellite
System
4-226-697-21(1)
Operating Instructions
Mode d’emploi
SA-VE315
GB
FR
SA-VE312
©2000 Sony Corporation
WARNING
To prevent fire or shock hazard, do not
expose the unit to rain or moisture.
To avoid electrical shock, do not open the cabinet.
Refer servicing to qualified personnel only.
Do not install the appliance in a confined space,
such as a bookcase or built-in cabinet.
NOTICE FOR THE CUSTOMERS IN
CANADA
CAUTION
TO PREVENT ELECTRIC SHOCK, DO NOT USE
THIS POLARIZED AC PLUG WITH AN
EXTENSION CORD, RECEPTACLE OR OTHER
OUTLET UNLESS THE BLADES CAN BE FULLY
INSERTED TO PREVENT BLADE EXPOSURE.
GB
2
Table of Contents
Hooking up the system ......................... 4
Positioning the speakers........................ 7
Listening to the sound ........................... 8
Adjusting the sound .............................. 8
Precautions ............................................ 10
Troubleshooting ................................... 11
Specifications ........................................ 11
About this manual
The instructions in this manual are for SA-VE315 and SA-VE312, Sony Micro Satellite Systems.
Differences between the systems
• SA-VE315
The SA-VE315 is a 5.1 channel speaker system consisting of two front speakers,
two rear speakers, one center speaker, and one subwoofer. It supports Sony Digital
Cinema Sound, Dolby* Pro Logic, and Dolby Digital (AC-3), and is thus geared
towards the enjoyment of movies.
• SA-VE312
Consisting of two front speakers and one subwoofer, the SA-VE312 is suited for the enjoyment
of music.
* Manufactured under license from Dolby Laboratories. DOLBY, the double-D symbol ;, “PRO LOGIC” and
“Dolby Digital (AC-3)” are trademarks of Dolby Laboratories.
Any difference in operation is clearly indicated in the text, for example, “SA-VE315 only.”
GB
GB
3
Hooking up the system
Connect the speaker system to the speaker output terminals of an amplifier.
Make sure power to all components (included the subwoofer) is turned off before starting the
hook-up.
Hookup A (for SA-VE315)
This configuration is used when the amplifier is connected to a DVD player, LD player, VCR or
other video devices.
Front (Right)
Ee Ee
LINE IN
Subwoofer Center
Amplifier
Ee
WOOFER OUT
CENTER
Ee
R
eE Ee
R
FRONT
L
L
REAR
Ee Ee
Front (Left)
Rear (Left)Rear (Right)
GB
4
Hookup B (for SA-VE315)
Try this configuration instead of “Hookup A” in the following situations:
— When there are no jacks on the amplifier for a subwoofer.
— When you want a stronger bass sound from the subwoofer.
Front (Right)
Ee Ee
Amplifier
Ee
CENTER
R
eE Ee
R
Center Front (Left)
Ee
Subwoofer
L
e
E
E
e
RLR
FRONT
L
L
SPEAKERINSPEAKER
REAR
OUT
Ee Ee
Terminal (jack) connections
e
e
E
E
E
e
E
e
Rear (Left)Rear (Right)
continued
GB
5
Hooking up the system (continued)
Hookup C (for SA-VE312)
This configuration is used when the amplifier is connected to a CD player, MD deck, cassette
deck, or other audio devices.
Front (Right)
Ee Ee
Subwoofer
L
e
E
Amplifier
FRONT
RL
eE Ee
SPEAKERINSPEAKER
E
e
RLR
Front (Left)
OUT
Terminal connections
e
E
e
e
E
E
e
E
Notes
• Make sure the plus (+) and the minus (–) terminals on the speakers are matched to the corresponding plus (+)
and minus (–) terminals on the amplifier.
• Be sure to tighten the screws of the speaker terminals securely as loose screws may become a source of noise.
• Make sure all connections are firm. Contact between bare speaker wires at the speaker terminals may cause a
short-circuit.
• Do not connect the subwoofer to the amplifier’s CENTER output terminal (which is for Dolby Pro Logic or
Dolby Digital (AC-3)). No bass sound will output from the subwoofer if you do.
• For details regarding the connections on the amplifier side, refer to the manual that was provided with your
amplifier.
Tip
All striped wires are minus (–) in polarity, and should be connected to the minus (–) speaker terminals.
GB
6
Positioning the speakers
Location of each
speaker
Center*
Setting the speakers
To prevent speaker vibration or movement
while listening, attach the supplied foot pads
to the bottom four corners of the center
speaker*, front speakers, and rear speakers*.
*SA-VE315 only
Subwoofer
Front
(Left)
AA
Rear*
(Left)
BB
*SA-VE315 only
Each speaker should face the listening
position. Better surround effect will result if
all speakers are set at the same distance from
the listening position.
Place the front speakers at a suitable distance
to the left and right of the television.
Place the subwoofer on either side of the
television.
Place the center speaker on the top-center of
the TV set.
The placement of rear speakers greatly
depends on the configuration of the room.
The rear speakers may be placed on both
sides of the listening position A or behind
the listening position B.
Tips
• Movies are best enjoyed in a room that produces
no echoes (as in one with surrounding curtains).
• Music (especially classical music) is best enjoyed
in a room that produces some echo.
Front
(Right)
Rear*
(Right)
Foot pads
Setting the center speaker
(SA-VE315 only)
Set the center speaker firmly on top of the
TV set, making sure it is completely level.
Foot pads
Setting other speakers
For greater flexibility in the positioning of
the speakers, use the optional WS-FV10,
WS-TV10, or WS-WV10 speaker stand
(available only in certain countries).
WS-FV10 WS-TV10 WS-WV10
(for rear speakers)
Tip
The height of the front speakers should be adjusted
to about the center of the TV screen.
GB
7
Listening to the sound
Adjusting the sound
LEVEL MODE
MOVIE
POWER
MIN MAX
POWER POWER indicator
MUSIC
First, turn down the volume on the amplifier.
The volume should be set to minimum before
you begin playing the program source.
1 Turn on the amplifier and select the
program source.
2 Press POWER on the subwoofer.
The POWER indicator on the subwoofer
lights up green.
3 Play the program source.
Slight adjustments to the system can enhance
your sound enjoyment.
Adjusting the
subwoofer
LEVEL MODE
MOVIE
POWER
MIN MAX
LEVEL MODE
MUSIC
1 Set MODE according to the program
source as follows:
Source MODE
DVD, LD, video cassette MOVIE
or other video source
MD, CD, cassette tape MUSIC
or other audio source
2 Rotate LEVEL to adjust the volume.
Set the volume level to best suit your
preference according to the program
source.
Notes
• Some amplifier functions for enhancing the sound
may cause distortion in the subwoofer. If such
distortion occurs, turn off those functions.
• To enjoy high-quality sound, do not turn the
subwoofer volume too high.
• To increase the bass sound from the subwoofer,
connect the system using “Hookup B” (see
page 5).
• The bass sound is enhanced in MOVIE mode
rather than in MUSIC mode. Therefore, if you
change the mode to MOVIE while listening to
some sources that do not include the bass sound,
you may not be able to get the effect.
GB
8
Loading...