Listening to audio content on your Mac,
iPhone, iPod touch or iPad
4-418-920-11(1)
You can play audio from an iPhone, iPod touch or iPad, and also from a Mac.
Turning the speaker on
Connect the unit to an AC power source with the AC
adaptor and the AC power cord.
Set the OPERATE ON/OFF switch to ON.
Set the STANDBY MODE switch to NETWORK
STANDBY.
WPS* push button configuration method
Press the WPS button on the access point.
Press the WPS button on the speaker for three
* WPS is a standard for easy and secure establishment of a wireless
home network. Many new wireless LAN routers/access points come
with this feature.
Manual wireless set up
For Mac
1 Connect the unit and the access point using a network
(LAN) cable.
Control & stream
Connecting the speaker
(network settings)
seconds.
Make sure that your Mac/iPhone, iPod touch or iPad are
within the same network as the SA-NS500.
2 Start Safari and Select “Bonjour” under “Bookmark menu”.
3 Select “SA-NS500.”
4 Start wireless setting from Browser.
Tips
For details on the wireless settings, refer to “Option 1: Manual wireless
setup” in the operating instructions.
For details on the connection process and terms, refer to “Option 1:
Manual wireless setup” in the operating instructions.
For details on Safari, refer to the Safari help.
For iPhone, iPod touch or iPad
Check the following customer support site
http://esupport.sony.com/ for customers in the United States
http://esupport.sony.com/CA/ for customers in Canada
Search for further information using the word “SA-NS500.”
You will find “How to stream music to SA-NS500 from iPhone,
iPod touch or iPad” at the above.
©2011 Sony Corporation Printed in China
Continued
Using AirPlay
Tap/click on the icon at bottom right of the iTunes
window or on the window of the iPhone, iPod touch
or iPad.
iTunes
iPhone, iPod touch or iPad
Select “SA-NS500” on the AirPlay menu of iTunes or
the iPhone, iPod touch or iPad.
Tips
You can use the VOLUME+/–, , , , and buttons on the
remote control. Operation from the unit’s remote control is active only
when the unit is selected as the device for output.
When you use iTunes, set it to accept control from the remote control
when you want to use the remote control to operate iTunes.
The most recent control command to the unit is given priority. The
unit starts playing back audio content of another device when it
accepts control from that AirPlay-equipped device, even if this unit is
being used for AirPlay with the original device.
AirPlay, the AirPlay logo, iPhone, iPod Touch, iTunes, and
Safari are trademarks of Apple Inc., registered in the U.S. and
other countries. iPad is a trademark of Apple Inc.
The unit will start playing back after detecting audio
content.
iTunes
iPhone, iPod touch or iPad