Specifications and Main Features
- Model Numbers: RSE-500, RSE-400
- System Compatibility: Compatible with ISDN and non ISDN circuits for video transfer
- Image Compression: Utilization of H.261 compression standards
- Capacity:
- sixt four remote locations for registration.
- up to 1 registered remote site for alarm signal relay.
- max of 8 alarm signals registered onto 1 ALARM IN port.
- Relay Control: Operates devices located at the central site or hears voice at the terminal site
- Automatic Data Transmission: Data may be sent upon detection of the alarm condition
- Camera Input: More than one camera can be connected
- Communication Mode: The ISDN line rate (64k 56k) and communication internal modes (SINGLE, DUAL for V.35 Interface) can be set.
- Security: Has a password for restriction to access the device
- Interfaces: RS-232C interface for computers or tablets connection.
- Audio Features: Volume controls for headset and microphone input.
- Picture Quality Settings: Display video in three different modes,(FINE,NORMAL,FAST) as per user requirement.
- Remote Camera Control: Offering physical controls to cameras that are connected.
- Automatic Camera Selection: Switching a camera for input based on the alarm signals received.
Frequently Asked Questions
- Q: How many registered remote sites can I do?
A: sixt four registered remote sites can be done.
- Q: In what manner does this device deal with an alarm signal?
A: The device is able to register as much as 10 remote locations to automatically transmit data upon a detection of an alarm signal.
- Q: Is it possible to change the level of quality of the video?
A: Yes, there are picture quality settings which are designated as FINE, NORMAL, and FAST.
- Q: What other types of interfaces does the Video Transmitter work with?
A: These include the ISDN and V.35 interfaces as well as RS-232C for the computer and tablets.
- Q: Are there provision for passwords for security?
A: Yes, the system does allow you to configure a password to avoid access by unauthorized people.
- Q: How do I operate the cameras which are connected?
A: The Video Transmitter has zoom, pan, tilt, focus and iris features that may be controlled and accessed through the main menu.
- Q: Am I able to connect my tablet or computer to the Video Transmitter?
A: Yes, a computer can be connected using the RS-232C interface or menu operations with a tablet.
- Q: How do I proceed when the device ends up not working as required?
A: Repairs or warranty information is best sought from the Sony Business Information Center or the manual troubleshooting part.
User Manual
Loading...