Sony RMT-V260 Service Manual

Setting up the remote commander

Controlling other TVs with the remote commander

The remote commander is preprogrammed to control non-Sony TVs. If your TV is listed in the table below, set the appropriate manufacturer’s code number.

* These buttons may not work with all TVs.

Tip

• When you set your TV’s code number correctly while the TV is turned on, the TV turns off automatically.

Set TV/VIDEO at the top of the remote commander to TV.

Hold down ?/1, and enter your TV’s code number(s) using the programme number buttons.Then release ?/1.

Now you can use the following TV control buttons to control your TV:

?/1

, TV/VIDEO, programme number buttons, –/– – (ten’s digit), PROG +/–,

+/–, a (TV), / (Teletext), FASTEXT buttons, WIDE

, MENU*, CURSOR

, and OK*.

Getting Started

Setting up the remote commander

Code numbers of controllable TVs

If more than one code number is listed, try entering them one at a time until you find the one that works with your TV.

To switch to wide mode, see the footnotes below this table for the applicable code numbers.

Press WIDE to switch to the wide picture mode you want.

Press WIDE, then press 2 +/– to select the wide picture mode you want.

Press WIDE. The menu appears on the TV screen.Then, press CURSOR M/m/</, to select the wide picture you want and press OK.

Manufacturer Code number

Sony

, 02, 03, 04, 05

Aiwa 32

Akai 68

Blaupunkt 10, 21

Brionvega 40

C.G.M 09

Colonad 03

Dual 44

Emerson 03, 04

Fenner 30, 31

Ferguson 52

Goldstar 03, 04, 17

Grundig

, 11

Hitachi 24

Hyper 31

Inno-Hit 41

Irradio 20

ITT

15, 16, 69

JVC 33

Loewe 45

Mitsubishi

, 28*1, 50*1, 51

Mivar 09

NEC 66

Nokia

15, 16, 69

Nordmende 35, 42

Orion 47, 48

Panasonic

, 49

Philips

, 07*1, 08

Phonola 18, 19

Pioneer 26

Saba 12, 13

Samsung 22, 23

Sanyo 25

Schneider 46

Seleco 14

Sharp 29

Siemens 39

Sinudyne 37

TEAC 67

Telefunken 36

Thomson

Tos hiba 38

White Westinghouse

Manufacturer Code number

continued