Sony PT-1155-IR10 Installation Manual

Installation Guide

PT-1155-IR10

Content of box:

1 x Touch overlay
3 x Brackets

13 x Phillips screws

Copyright PresTop B.V. 2015. All rights reserved

Table of Contents

Introduction 2
Capabilities 3
Unpacking the Unit 4
Installation Instructions 5 - 6
USB Installation 7
Operating the Touch Screen 8
Cleaning the Touch Screen 9
Troubleshooting 9 -11
Specifications 12

Terminology

Monitor: refers to the Sony FWL-55W805C / FW-55X8570C LCD screen.
Sometimes referred to as “display screen.”

Touch overlay: refers to the PresTop overlay that fits onto the monitor and
provides the touch functionality.

Touch screen: refers to the combined unit—the monitor and the touch overlay.

1

Copyright PresTop B.V. 2015. All rights reserved

Introduction

Congratulations on your purchase of a PresTop PT Touch Overlay. This product turns a
Sony FWL-55W805C / FW-55X8570C large-format display, into an interactive display.
You can control a computer application simply by touching the screen.

The PT Touch Overlay can be connected to the computer via USB cable, thus providing
maximum versatility. The USB is HID compliant, providing true plug-and-play operation,
just like a USB mouse.

The standard PT Touch Overlay is powered via the USB interface from the computer and
hence does not require a separate power supply.

The main steps to install the PT Touch Overlay are as follows:

• Unpack the PT Touch Overlay.

• Unpack the screen.

• Fit the touch overlay to the display screen.

• Connect all the cables.

Touch service Software Suite

For USB communications, you do not need to install any software. However, an optional
USB Configuration program that allows you to change various default settings is
available in the Touch service software suite.
Touch service software can be downloaded from http://prestopproducts.com/support/.

Once installed, this program is available from the Start / Programs / Touchservice.

2

Copyright PresTop B.V. 2015. All rights reserved

Capabilities

The following table shows the touch functionality provided by a PresTop PT touch over­lay with different operating systems.

1) Windows must be non OEM version.

2) Kernal 3.0+, csn support multitouch by adding patch.
Kernal 3.5+, HID compliance support multitouch.

3) Gesture support on request.

4) Kernal 2.6.32+, we can provide patch
Kernal 3.5+, HID compliance support Multi-touch

Multi-Touch and Gestures on Windows 7, 8, 10

The latest operating systems from Microsoft and other vendors support multi-touch
features such as two-touch gestures. The PresTop PT touch overlay is multi-touch
capable and supports gestures.

3

Copyright PresTop B.V. 2015. All rights reserved

Unpacking the Unit

Unpack the unit, taking care not to damage the surfaces. Check the product for any
signs of damage in transit.

Installation Requirements

Once you have unpacked the unit, make sure you have the following:

• The display monitor that you are going to mount the touch overlay onto.

• The computer that runs your software application, including the cable that
connects the computer to the display screen.

Safety Notes

• The touch overlay contains glass that can add significant weight, especially
for large-format displays. It is essential that the monitor’s stand is strong and
stable enough to support the combined weight of the touch overlay and
monitor.

• For a large screen, you need two people to install the touch overlay safely.

Parts of the Touch Overlay

The PresTop PT Touch Overlay consists of metal frame, in this frame is the touch and
glass.

The overlay is secured with brackets on the monitor, which are screwed in the frame.

4