Sony PS3 INFIMOD Installation Manual

PS3 INFIMOD Installation Manual

Installation time 10-15 minutes.

INFIMOD includes electronic board and cable.

Unscrew 5 screws.

Open first back side of the controller. If you have any

problems opening your controller then on YouTube you can

find many videos with explanations how to do it. Search for

”disassemble a ps3 controller”.

Opened controller. Gray piece is the battery.

Disconnect battery from the green board. Try to hold white

connector and don't pull the wires.

Unscrew additional screw.

Lift the board.

Place the original board like on the picture.

Now we need to lift the PCB(prinetd circuit board) of the

buttons. Insert screwdriver as shown on the picture.

Lift right side up.

Then with the help of twizzers or your finger push left side of

the board as shown on the picture.

With the help of screwdriver lift left side of the board.

Both sides are lifted. Under the board you will see black

cushion.