Page 1
TABLE OF CONTENTS
English8188
SAFETY INSTRUCTIONS .................................................................. 2
INTRODUCTION ............................................................................. 4
Package Contents ..................................................................... 4
Installing or Removing the Tilt/Swivel Base ............................ 5
Feature Highlights ....................................................................5
Maximum Compatibility................................................... 5
Latest Screen Technology ................................................. 5
Ergonomics concerned ..................................................... 6
Instant Power Saving Solution .......................................... 6
Specifications ...........................................................................6
Recommended Use of the Monitor .......................................... 7
CONTROLS AND ADJUSTMENTS ................................................... 8
Front User Controls. ................................................................ 8
"Picture" Menu ........................................................................ 9
"Status" Menu ........................................................................ 10
"Color" Menu......................................................................... 11
Contrast and brightness control ............................................. 11
BNC/D15 / Exit Switch ........................................................... 11
Energy Declaration ................................................................ 11
TECHNICAL INFORMATION......................................................... 12
Compatibility ......................................................................... 12
Pin Assignment Table ..................................................... 12
Pin Assignments of the BNC Connectors ........................ 12
Preset Timing Chart ........................................................ 13
TROUBLESHOOTING .................................................................... 14
DIMENSION/ABMESSUNGEN/DIMENSION ................................. 43
PLUG & PLAY: DISPLAY DATA CHANNEL (DDC) ........................ 44
MANUFACTURER'S LIMITED WARRANTY. .................................. 45
English
1
♦♦♦
Page 2
SAFETY INSTRUCTIONS
1. Please read carefully all of these instructions below and keep the manual
for later use.
2. Please install the swivel base below this product before it comes into
English
use.
3. The voltage ratings and the rated frequency are on the overlay centered
at rear side of this product. Do not connect with any source of other
voltage or frequency and please follow all warnings and instructions
marked on the product.
4. Unplug this product from the wall outlet before cleaning and use a
damp cloth to clean it. Do not use liquid cleaners or aerosol cleaners.
5. Do not expose this product to rain or moisture.
6. Do not place this product on an unstable cart, stand, or table. The
product may fall, causing serious damage to the product.
7. Do not block or cover ventilating openings with cloth or other material.
Neither should this product be placed near or over a radiator or a heat
register, nor should the product be placed in a built-in installation
unless proper ventilation is provided.
8. This product is equipped with a 3-wire grounding type plug. This plug
will only fit into a grounding-type power outlet. This is a safety feature.
If you are unable to insert the plug into the outlet, contact your
electrician to replace your obsolete outlet. Do not defeat the safety
purpose of the grounding-type plug. Choose a Tandem Blade
attachment plug configuration power cord for 230V AC input.
Due to the safety requirements of different areas, please select a suitable
power cord according to the following rules, in addition to the electric
rating:
A. Northern America area: Please select a UL listed and CSA certified
power cord.
B. Germany: Please select a VDE certified power cord.
C. Nordic countries: Please select a power cord certified by SEMKO,
NEMKO, DEMKO or FIMKO.
D. The other areas: Please select a power cord suitable to the local
power system and power outlet.
2
♦♦♦
Page 3
SAFETY INSTRUCTIONS
Usually a suitable power cord is provided by the manufacturer, while
this product is sold. However, this product is sometimes, resold or
transported to another area of different power system and safety
requirements, please pay attention to the selection of a suitable power
cord.
The plug on the power cord is intended to serve as the disconnect
device, the scoket-outlet shall be installed near the equipment and
shall be easily accessible.
9. Do not allow anything to rest on the power cord. Do not locate this
product where persons will walk on the cord.
10. Never push objects of any kind into this product through cabinet slots
as they may touch dangerous voltage points or short out parts that
could result in a risk of fire or electric shock. Never spill liquid of any
kind on the product.
11. Do not attempt to service this product yourself, as opening or removing
covers may expose you to dangerous voltage points or other risk. Refer
all servicing to service personnel.
12. Unplug this product from the wall outlet and refer servicing to qualified
service personnel under the following conditions.
English8388
English
A. When the power cord or plug is damaged or frayed.
B. If liquid has been spilled into the product.
C. If the product has been exposed to rain or water.
D. If the product does not operate normally, when the operating
instructions are followed, adjust only those controls that are covered
by the operating instructions since improper adjustment of other
controls may result in damage and will often require extensive work
by a qualified technician to restore the product to normal operation.
E. If the product has been dropped or the cabinet has been damaged.
F. If the product exhibits a distinct change in performance, indicating
a need for service.
3
♦♦♦
Page 4
INTRODUCTION
Introduction
The monitor is a multiple frequency high-resolution color monitor for IBM
compatible PC's or Macintosh and workstation systems. The monitor is
equipped with microprocessor based intelligence and multiple frequency
English
scanning capability, allowing it to provide maximum compatibility for various
system platforms.
The monitor uses the latest screen technology including a 0.25mm Aperture
Grille CRT to display crisp text and vivid color graphics with a max. resolution
up to 1600 x 1200 pixels. Furthermore, it supports VESA 85Hz modes to provide
a flicker free display. The full-function digital control and On-Screen Display
(OSD) system provides easy adjustment of image geometry and color settings
for different display modes with the precision of a fixed frequency monitor.
The design of the monitor is also ergonomics concerned. In addition to the
friendly controls and user comfort features, the emission level of the electric
and magnetic field is kept low to meet the Swedish MPR II and TCO standards.
The monitor is also equipped with energy saving functions; it is compatible
with the VESA power saving standards. The lowest power consumption is less
than 8 W.
Package Contents
The following lists all of the items included in the monitor package box. Please
save the original box and packing materials for future transportation or shipment
of the monitor.
4
♦♦♦
Front View
Power Cord
Rear View
Signal Cable
USER'S MANUAL
BENUTZERHANDBUCH
Manuel de l'utlisateur
PR710T
User's Manual
Page 5
INTRODUCTION
English8588
Installing or Removing the Tilt/Swivel Base
1.Turn off the system and all attached
peripherals.
2.Carefully set the monitor upside down.
Remove the Tilt/Swivel Base:
1.Squeeze and hold the latches.
2.Pull the tilt/swivel base to the rear of the
monitor and lift to remove the base.
Installing the Tilt/Swivel Base:
1.Align the base with the slots on the bottom of the monitor and insert the tilt/swivel base into the slots.
2.Push the tilt/swivel base firmly toward the front of the monitor until the
latches click into the locked position.
Feature Highlights
Maximum Compatibility
Automatically scans all horizontal frequencies between 30kHz and 95kHz,
and all vertical frequencies between 50 Hz and 160 Hz.
Supports multiple operating platforms such as IBM compatible PC's or
Macintosh computers (with optional adapter).
Multiple graphic standards with high refresh rates:
640 x 480/160Hz, 800 x 600/147Hz, 1024 x 768/117Hz, 1280 x 1024/
85Hz, 1600 x 1200/75Hz.
Supports wide range of graphics standards including VGA, Super VGA, 8514/
A, XGA, Mac II 13" (640 x 480), Mac 16" (832 x 624), Mac 21" (1152 x
870), as well as all VESA standards.
Install
Remove
English
Latest Screen Technology
0.25 mm Aperture Grille 17" CRT (43.1 cm) for maximum clarity and detailed
pictures.
Special anti-reflection, anti-glare and anti-static coating of the screen face
provides better focus, contrast and color performance.
Cylindrical screen reduces image distortion and glare.
Full feature digital control and multi-lingual OSD system allows easy
adjustment of geometry and color. Furthermore the monitor provides even
advanced adjustments like trapezoid, parallelogram, side-pin, pin-balance,
convergence and rotation which allow the user to fine-tune the screen image.
5
♦♦♦
Page 6
INTRODUCTION
Ergonomics Concerned
Electric and magnetic field emissions are kept low to meet the Swedish
MPR II and TCO standard.
Front user controls allow easy access and comfort to adjust the screen image
to your personal preferences.
Horizontal and vertical full-scan capabilities allow you to use the entire
English
screen area in most resolutions.
A tilt/swivel base for horizontal and vertical adjustments always provides
the optimum viewing angle.
The BNC/D-15 selection allows user to connect two systems to the monitor
and easily select between the two from the front panel switch.
Instant Power Saving Solution
The monitor is compatible with VESA DPMS (Display Power Management
Signalings) standard which provides four power saving modes by detecting
horizontal and vertical sync signals.
The monitor consumes 65 W to 110 W depending on the screen contents in
normal operation; when a power saving mode is activated, it consumes less
than 15 W in Stand-by mode, less than 15 W in Suspend mode and less
than 8 W in Off mode.
Specifications
Color Picture Tube 43.1 cm / 17" (16" viewable screen size) diagonal measurement, 90 degree
Dot Pitch 0.25 mm, Aperture Grille
Input Signal Video: 0.7 Vp-p/75 ohm, analog positive
Scan Frequency Horizontal: 30 to 95 kHz automatically
Display Area Horizontal 300 mm (adjustable)
Max. Resolution 1600 x 1200 pixel, non-interlaced
Display Colors Analog input, unlimited colors
Pixel Rate 202.5 MHz
Misconvergence Center 0.3 mm, Corner 0.4 mm maximum
Plug & Play DDC 1 / DDC 2B
Power Supply 100-120 VAC/200-240 VAC, 50/60 Hz (automatically)
Power Consumption 110W max.
Dimensions 418(W) x 430(H) x 446.5(D) mm
Weight 21.3 kgs(G.W.), 18.5kgs(N.W.)
Environment Operating Temperature: 0°C to 35°C
Consideration Humidity 20% to 80%
Note: Specifications are subject to change without notice.
deflection, Aperture Grille CRT, anti-glare, anti-reflection, anti-static, medium
short persistence phosphor, dark bulb
Sync: Separate Sync.: TTL Level
Horizontal Sync.:positive/negative
Vertical Sync.: positive/negative
Composite Sync.: TTL Level, positive/negative
Composite Sync.: on green video 0.3Vp-p Negative
Vertical: 50 to 160 Hz automatically
Vertical 225 mm (adjustable)
Storage Temperature: 20°C to 60°C
Humidity 10% to 90%
6
♦♦♦
Page 7
INTRODUCTION
English8788
Recommended Use of the Monitor
When setting up and using the monitor, pay special attention to the following
for optimum performance:
Do not use your monitor against a bright background or where sunlight or
other light sources will shine directly on the screen.
The monitor should be placed just below eye level (10°~15°) for optimum
viewing.
Set the monitor's brightness to match the ambient room light.
For optimum focus, the contrast control should not be set to the maximum
level unless the input signal level is extremely low. Also, the brightness
control should be set to a point where the overall background area just
begins to disappear.
Allow adequate ventilation around the monitor so that the heat from the
monitor can properly dissipate.
Neither the monitor itself, nor any other heavy objects, should rest on the
power cord. Damage to the power cord can cause fire or electrical shock.
Keep the monitor away from high-capacity transformers, electrical motors,
or other strong magnetic fields.
Your monitor should not be used in damp, dusty, or dirty areas.
Handle your monitor with care when transporting it.
CAUTION
!
ê
English
Do not scrap or knock the surface of CRT with a pen, a screwdriver
and so on.
Clean the CRT surface with a lint-free, nonabrasive, soft cloth,
and should not use the solution or glass cleaner containing
corpuscles like an abrasive, alcohol and an alkaline solution.
7
♦♦♦
Page 8
CONTROLS AND ADJUSTMENTS
Controls and Adjustments
Once you have installed the monitor for your system, please read the
instructions of this section which give you some guidelines on how to use the
monitor more efficiently. It leads you through the various function of the user
controls and explains how to adjust the monitor to your personal preference.
English
Front User Controls
BNC/D15
▲
1. Power Switch
To turn the monitor on or off.
2. Power LED Indicator
As long as the monitor is powered, this indicator is lit. In normal operation, it
lights green. While in power saving mode, the indicator will turn to amber.
3. Degauss Switch
To manually degauss the monitor.
4. BNC/D15 / Exit Switch
To select input signals from BNC or D-SUB 15 pin connector or to turn off OSD
window.
5. Control Keys
To adjust the parameter of the selected function.
To adjust the contrast level or brightness of the screen.
6. Status Key
To display and select the "Mode", "Off time", "Power save", "Recall",
"Language" and "Location" functions.
"Mode" shows horizontal/vertical frequency and polarity
"Off time" sets OSD window display time.
"Power save" enables or disable the power saving function.
"Recall" recalls the factory settings of the "Picture", "Color" and "Converge"
parameters.
"Language" selects the OSD menu language.
"Location" moves the position of the OSD window.
7. Color Key
To display and select the color mode.(four different color modes can be chosen)
8. Picture Key
To display and select the "Position", "Size", "Pincushion", "Geometry",
"Rotation" and "Others" functions.
Power Saving Note:
This monitor is equipped with a automatic power-saving circuitry design that
will work with any computer which meets the VESA DPMS standard. It meets
the ENERGY STAR low power state definition.
+–
▼
2345678
1
8
♦♦♦
Page 9
CONTROLS AND ADJUSTMENTS
"Picture" Menu
A.Position:
Picture
Position
Size
Pincushion
Geometry
Rotation
Others
B. Size:
Picture
Position
Size
Pincushion
Geometry
Rotation
Others
English8988
a. Press the "+" or ""key to reposition the display to the
right or left.
b. Press the "▲" key to move the entire picture upwards
and "▼" to move it downwards.
a. Press the "+" or "" key to enlarge or reduce the
horizontal width.
b. Press the "▲" key to enlarge the vertical size or "▼" to
reduce it.
English
C. Pincushion:
Picture
Position
Size
Pincushion
Geometry
Rotation
Others
Sidepin
D. Geometry:
Picture
Position
Size
Pincushion
Geometry
Rotation
Others
Keystone
E. Rotation:
Picture
Position
Size
Pincushion
Geometry
Rotation
Others
Raster
F. Others:
Picture
Position
Size
Pincushion
Geometry
Rotation
Others
Moire
Moire
Converge
: Proceed
50
R
R
B
B
46
a. Press the "▼" or "▲" key to select "Sidepin" or "Balance".
b. Press the "+" or "" key to adjust the picture according
79
to your preferences.
a. Press the "▼" or "▲" key to select "Keystone" and
"Parallel".
b. Press the "+" or "" key to adjust the picture according
90
to your preferences.
Press the "+" or "" key to rotate the picture.
50
a. Press the "▼" or "▲" key to select the Moire or Convergence.
b. Press the "+" key to proceed.
c. Press the "+" or "" key for prefered adjustment.
d. Press the "▼ " or "▲ " key to select the H./V.Convergence.
e. Press the "+" or "" key for prefered adjustment.
Caution:
1. If moire reduction is overdone, picture quality, i.e.
focus and vertical line stability will both be effected .
2. Proper adjustment is recommanded for not effecting
picture perfermance.
9
♦♦♦
Page 10
"Status" Menu
A. Mode:
Status
Mode
Off time
Power save
Recall
English
Language
Location
B. Off time:
Status
Status
Mode
Mode
Off time
Off time
Power save
Power save
Recall
Recall
Language
Language
Location
Location
C. Power save:
Status
Mode
Off time
Power save
Recall
Language
Location
D. Recall:
Status
Mode
Off time
Power save
Recall
Language
Location
Status
Mode
Off time
Power save
Recall
Language
Location
CONTROLS AND ADJUSTMENTS
1280 x1024
H: 63.8 KHz
V: 5 9.8 Hz
H. SYNC: +
V. SYNC: +
OSD OFF
OSD OFF
After
After
58
58 SEC
SEC
VESA
DPMS
: ON
: OFF
Picture
Color
Converge
:Proceed
Confirm
:YES
:NO
To display timing information for the resolution, frequency
and polarity of the current mode.
Press the "+" or "" key to specify an Off time between 5 and
255 seconds.
Press the "+" key to enable or the "" key to disable the
power saving function.
a. Press the "▼" or "▲" key to select "Picture", "Color" or
"Converge".
b. Confirm the Recall action and proceed by pressing the
"+" key or cancel the action by pressing the "" key.
E. Language:
Status
Mode
Off time
Power save
Recall
Language
Location
English
Deutsch
Français
Español
Italiano
F. Location:
Status
Mode
Off time
Power save
Recall
Language
Location
10
♦♦♦
OS D
Press the "▼" or "▲" key to select between English, German,
French, Spanish or Italian language for the OSD menu.
a. Press the "+" key to shift the OSD window to the right
or the "" key to shift it to the left.
b. Press the "▲" key to move the OSD window upwards or
"▼" to move it downwards.
Page 11
CONTROLS AND ADJUSTMENTS
English81188
"Color" Menu
Mode 1
Mode 2
Mode 3
Mode 4
9300
Mode 1
Color
62
°K
68
62
Mode 1
Mode 2
Mode 3
Mode 4
7500
Color
52
°K
51
61
Mode 2
Mode 1
Mode 2
Mode 3
Mode 4
6500
Mode 3
Color
50
°K
50
50
a. By pressing the "Color" key you can select between mode 1, 2, 3 or 4 to store
your user defined color settings.
b. Press the "▼" or "▲" key to select the R/G/B gain, then press the "+" key to
increase or press the "" key to decrease the respective color intensity.
Contrast and Brightness Control
When the OSD menu is switched off, proceed as follows
:50
to adjust the contrast or brightness:
a. Press the "+" or "" key to increase or decrease the
contrast level of the screen.
b. Press the "▲" or "▼" key to increase or decrease the
:100
brightness level.
BNC/D15 / Exit Switch
a. BNC/D15 selection
While the OSD window is not displayed.
Select the BNC/D15 by pressing the key.
b. Exit Switch
You can turn off the OSD window by pressing this
key.
Energy Declaration
This monitor is equipped with a function for saving energy which supports the
VESA Display Power Management Signaling (DPMS) standard. This means that
the monitor must be connected to a computer which also supports the VESA
DPMS standard to fulfill the requirements of the NUTEK specification 803299/
94/96. The time settings for switching to a power saving mode are adjusted
from the system unit by software. From the first indication of inactivity to power
saving position A2 the total time must not be set to more than 70 minutes.
1. VESA Power-Management Proposal
VESA DPMS Standard
H. sync V. sync Video State
Off On Blank Stand-by
On Off Blank Suspend
Off Off Blank Off
According to TCO guidelines, the optimum TCO readings are measured when
brightness and contrast are adjusted to their center position.
2. Power Consumption (120/230 Vac)
NUTEK VESA state LED indicator
Nor ma l
operat ion
Power Savi ng
Position A1
Power Savi ng
Position A2
On Green <110W
Suspe nd Amber <15W
Off Amber <8W
Mode 1
Mode 2
Mode 3
Mode 4
5000
Mode 4
°K
Color
Consumpt ion
58
47
23
Power
English
11
♦♦♦
Page 12
TECHNICAL INFORMATION
Compatibility
This color monitor supports multiple operating platforms such as IBM
compatible and Macintosh family computers. This section provides you with
detailed information on pin assignment of the D-Sub connector and the preset
timing chart of the prevailing video standards.
English
Pin Assignment
1
6
11
5
10
15
Male Mini D-15 Connector
Signal 15 Pin Mini D-Sub
Red Video 1
Green Video 2
Blue Video 3
Horizontal Sync 13
Vertical Sync 14
Ground 4,5,6,7,8,10,11
No Connection 9
SDA (DDC) 12
SCL (DDC) 15
Pin Assignments of the BNC Connectors
V. SYNCHS/CS
RED
GREEN BLUE
12
♦♦♦
Video
Page 13
Preset Timing Chart
Note:This monitor is equipped with a micro-processor which allows the user
to set his own preferred mode(s) beyond those standard mode listed
below.
TECHNICAL INFORMATION
English81388
♦♦♦
HORIZONTAL
VESA
Displa y Format
Hotizontal Dots 640 720 640 640 832 800 800 1152 1024 1024 1280 1280
Vertical Lines 480 400 480 480 624 600 600 864 768 768 1024 1024
H. Fr eque ncy (kHz) 31.469 43.269 63.530 49.726 53. 674 75.985 67.500 68.677 80.468 79.976 91.146
H. Sync. Polarity +++++
Aµs (Peri od) 31.778 23. 111 15.7 41 20.110 18.631 13.160 14.815 14. 561 12.427 12.504 10.971
*Bµs (Pulse Width) 3.813 1.556 1.749 1.117 1.138 1.074 1.185 1.016 1.073 1.067 1.016
Cµs (Back Porch) 1.907 2.222 1.731 3.910 2.702 1.951 2.370 2.201 1.945 1.837 1.422
Dµs (Acti ve Are a) 25.4 22 17. 778 11.6 60 14. 524 14.2 22 9.8 27 10.6 67 10.836 9.309 9.4 81 8.1 27
Eµs (Front Porch) 0.636 1.555 0.601 0.559 0.569 0.308 0.593 0.508 0.100 0.119 0.406
V. Frequenc y(Hz) 59.940 70.0 87 85.008 119.868 74. 552 85.062 120.039 75. 000 84.9 97 99.836 75.024 85.024
V. Sync. Polarity + + + + + + +
Oms (Per iod) 16.683 14.268 11.763 8.343 13.413 11.756 8.330 13.333 11.765 10.0 16 13.329 11.761
Pms (Pulse Width) 0.064 0.069 0.094 0.060 0.056 0.039 0.044 0.044 0.037 0.038 0.033
Qms (Bac k Po rch) 1. 049 1.112 0.578 0. 567 0.784 0.503 0.382 0.474 0.524 0.423 0.475 0.483
Rms (Act ive Area) 15. 253 12. 711 11.093 7.555 12.549 11.179 7.896 12.800 11.1 83 9. 544 12.804 11.234
Sms (Front Porch) 0.318 0.381 0.023 0.127 0.020 0.018 0.013 0.015 0.014 0.012 0.012 0.011
13
* Bµs (Pulse Width) should be more than 0.5 µs.
VGA
640x480
at 85 Hz
640x480
at 120 Hz
MAC
832x624
at 75 Hz
VESA
800x600
at 85 Hz
800x600
at 120 Hz
MAC
1152x864
at 75 Hz
VERTICAL
VESA
1024x768
at 85 Hz
To reduce visual tiredness and eye strain, it is recommended to choose the highest refresh modes available.
1024x768
at 100Hz
VESA
1280x102 4
at 75 Hz
English
VESA
1280x102 4
at 85 Hz
Page 14
TROUBLESHOOTING
Troubleshooting
Before calling an authorized service center, please check that the items below
are properly connected or set.
In case of using a non-standard signal, please check the pin assignments and
the signal timing of your adapter with the specifications outlined in sections
"Pin Assignment Table" and "Preset Timing Chart" in chapter 4.
English
Problem Items to check
No picture
"No Signal Input" is displayed on
the screen
Display image is not centered,
too small, or too large
Image is scrolling or unstable The signal cable should be completely att ached to t he computer.
Picture is fuzzy
Picture bounces or a wave
pattern is present in the picture
Edges of the display image are
curved either inward or outward
Color looks blotchy
No Plug & Play functionality Check if the host system is Plug & Play compatible.
Power Switch should be in the ON positi on and the power cord should be pr operly connected.
Check the color of the power LED indicator; if it is orange, then the monitor is in a power
saving mode.
Check if the horizontal/vertical frequency are out of range.
Maximize t he Brightness and Contrast controls.
The video card should be completely seated in it s slot.
The computer power switch should be in the ON position.
The signal cable should be completely connected to the video card/computer.
Change the Position and Size controls to adjust the image.
Check the pin assignments and signal timings of the monitor and your video card.
Adjust the Contrast and Brightness Controls.
Push the degauss but ton once.
CAUTION: A minimum i nterval of 20 minutes should exist before the degauss button is pressed
a second time when not switching between modes.
Do not hold the button down continuously.
Relocate electrical devices that may be causing electrical interference.
See the inside front cover of this manual for FCC information.
Adjust the Pi ncushion control.
Press the Degauss button once.
Check if the VGA card is DDC 1/DDC 2B compatible.
Check if Window '95 is i nstalled and the software key for DDC function is enablnly.
Check if original maker's detachable signal cable is being used(D-15 only). BNC cable does not
support Plug & Play function as it does not convey t he SCL (Signal Clock) and SDA (Signal Data)
signal.
This Monitor is build-in Trinitron CRT. This CRT is very sensitive to shocks
and vibrations that may occur during transportation. Following are some
adjustment tips when below mentioned symptoms occur.
Symptom Tip
One(15") or two(17")
horizontal lines are visible on
the screen
Black fine vertical lines are
visible on the sc reen. Shock
and vibration may cause the
aperture grill misalligned,
which results few fine black
vertical lines across the screen
14
♦♦♦
This is normal charactristic of Trinitron CRT.
These are damper wires which are attached to the apeture grille and
are de signed to dampen a nd prevent which shock and vibration of the
aperture grill.
Degaussing the screen.
Tap lightly (do not hit) the side of the monitor.
If above mentioned remedies do not work, please do the fo llowing:
1. Display full white window or wallpaper background over the area
where the black lines appears.
2. Set Contrast and Brightness to the maximum, wait for a moment until
the problem is corrected. You may try to tap lightly the side of the
monitor to help the expedite of the alignment.
Loading...