Sony PCV-RX670, PCV-RX660 System Reference Manual
i
ii
VAIO Digital Studio System Reference Manual
NOTICE
© 2002 Sony Electronics Inc. Reproduction in
whole or in part without written permission is
prohibited. All rights reserved. This manual and the
software described herein, in whole or in part, may
not be reproduced, translated, or reduced to any
machine-readable form without prior written
approval.
SONY ELECTRONICS INC. PROVIDES NO
WARRANTY WITH REGARD TO THIS
MANUAL, THE SOFTWARE, OR OTHER
INFORMATION CONTAINED HEREIN AND
HEREBY EXPRESSLY DISCLAIMS ANY
IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR ANY
PARTICULAR PURPOSE WITH REGARD TO
THIS MANUAL, THE SOFTWARE, OR SUCH
OTHER INFORMATION. IN NO EVENT SHALL
SONY ELECTRONICS INC. BE LIABLE FOR
ANY INCIDENTAL, CONSEQUENTIAL, OR
SPECIAL DAMAGES, WHETHER BASED ON
TORT, CONTRACT, OR OTHERWISE, ARISING
OUT OF OR IN CONNECTION WITH THIS
MANUAL, THE SOFTWARE, OR OTHER
INFORMATION CONTAINED HEREIN OR THE
USE THEREOF.
Sony Electronics Inc. reserves the right to make any
modification to this manual or the information
contained herein at any time without notice. The
software described herein is governed by the terms
of a separate user license agreement.
This product contains software owned by Sony and
licensed by third parties. Use of such software is
subject to the terms and conditions of license
agreements enclosed with this product. Some of the
software may not be transported or used outside the
United States. Software specifications are subject to
change without notice and may not necessarily be
identical to current retail versions.
Updates and additions to software may require an
additional charge. Subscriptions to online service
providers may require a fee and credit card
information. Financial services may require prior
arrangements with participating financial
institutions.
Sony, VAIO, the VAIO logo, VAIO Digital Studio,
VAIO Smart, VisualFlow, Media Bar, MovieShaker,
DVgate, PictureGear, and i.LINK are trademarks or
registered trademarks of Sony.
Memory Stick and are trademarks of Sony
Corporation.
Intel, Pentium, and Celeron are trademarks or
registered trademarks of the Intel Corporation.
Microsoft, Windows, and the Windows logo are
trademarks or registered trademarks of Microsoft
Corporation. PS/2 is a registered trademark of IBM
Corporation.
All other trademarks are trademarks or registered
trademarks of their respective owners.
Owner’s Record
The model number and serial number are located on
either the front or back panel of your Sony VAIO
computer. Record the model and serial number in
the space provided here, and keep in a secure
location. Refer to the model and serial numbers
when you call your Sony Service Center.
Model Number:
Serial Number:
iii
Safety Information and Caution
Your computer’s installed optical drives may vary,
depending on the system configuration you have
purchased. See the Specifications sheet for details
on your installed optical drives.
DVD-RW Laser Diode Properties
Laser Output
Wave Length
DVD-ROM Laser Diode Properties
Laser Output
Wave Length
1.3 mW
(CD-Read)
1.1 mW
(DVD-Read)
42.3 mW
(DVD-Write)
21.9 mW
(CD-Write)
650-662 nm
(DVD)
773-797 nm
(CD)
0.55 mW (DVD)
0.39 mW (CD)
635-665 nm
(DVD)
770-810 nm
(CD)
❑ To prevent fire or shock hazard, do not expose
your desktop to rain or moisture. To avoid
electrical shock, do not open the cabinet.
Refer servicing to qualified personnel only.
❑ Never install modem or telephone wiring
during a lightning storm.
❑ Never install telephone jacks in wet locations
unless the jack is specifically designed for
wet locations.
❑ Never touch uninsulated telephone wire or
terminals unless the telephone line has been
disconnected at the network interface.
❑ Use caution when installing or modifying
telephone lines.
❑ Avoid using the modem during an electrical
storm.
❑ Do not use the modem or a telephone to
report a gas leak in the vicinity of the leak.
❑ The socket outlet shall be installed near the
equipment and shall be easily accessible.
! To change the backup battery,
please contact your nearest Sony
Service Center.
! Caution: The use of optical
instruments with this product will
increase eye hazard. As the laser
beam used in this product is
harmful to the eyes, do not
attempt to disassemble the drive
cabinet. Refer servicing to
qualified personnel only.
CD-RW Laser Diode Properties
Laser Output
Wave Length
CD-ROM Laser Diode Properties
Laser Output
Wave Length
2.0 mW (Read)
53.0 mW (Write)
778-790 nm
0.2 mW
760-810 nm
! Danger: Visible and invisible laser
radiation when open. Avoid direct
exposure to beam.
! For CD-RW: Danger—Visible and
invisible laser radiation when
open. Avoid direct exposure to
beam.
! For DVD-RW: Danger—Visible laser
radiation when open. Avoid direct
exposure to beam.
iv
VAIO Digital Studio System Reference Manual
! Caution: For ADSL, HomePNA and
V.90 modem models; to reduce the
risk of fire, use only No. 26 AWG or
larger telecommunication line
cord.
❑ Pour prévenir tout risque d’incendie ou
d’électrocution, garder cet appareil à l’abri de
la pluie et de l’humidité.
❑ Pour prévenir tout risque d’électrocution, ne
pas ouvrir le châssis de cet appareil et ne
confier son entretien qu’à une personne
qualifiée.
❑ Ne jamais effectuer l’installation de fil
modem ou téléphone durant un orage
électrique.
❑ Ne jamais effectuer l’installation d’une prise
téléphonique dans un endroit mouillé à moins
que la prise soit conçue à cet effet.
❑ Ne jamais toucher un fil téléphonique à
découvert ou un terminal à moins que la ligne
téléphonique n’ait été débranché de
l’interface réseau.
❑ Soyez très prudent lorsque vous installez ou
modifiez les lignes téléphoniques.
❑ Évitez d’utiliser le modem durant un orage
électrique.
❑ N'utilisez pas le modem ni le téléphone pour
prévenir d'une fuite de gaz vous êtes près de
la fuite.
❑ L’appareil doit être le plus près possible
d’une prise murale pour en faciliter l’accès.
! Pour changer la pile de rechange,
veuillez contacter votre centre de
service Sony le plus près.
! Danger : Radiation laser visible et
invisible si ouvert. Évitez
l’exposition directe au faisceau.
! Pour les DVD-RW : Danger—
Radiation laser visible si ouvert.
Évitez l'exposition directe au
faisceau.
! Pour les CD-RW : Danger—
Radiation laser visible et invisible
si ouvert. Évitez l'exposition
directe au faisceau.
! Attention : Pour ADSL, HomePNA,
et V.90 modele modem; afin de
réduire les risques d'incendie,
n'utilisez qu'un cordon de
communication N0. 26 AWG ou
plus gros.
For questions regarding your product or for the
Sony Service Center nearest you, call
1-888-476-6972 in the United States or
1-800-961-7669 in Canada.
Sony Customer Support can be reached at
http://www.sony.com/pcsupport.
! Avertissement : L'utilisation
d'instruments optiques avec ce
produit augmente les risques pour
les yeux. Puisque le faisceau laser
utilisé dans ce produit est
dommageable pour les yeux, ne
tentez pas de désassembler le
boîtier. Adressez-vous à un agent
de service qualifié.
v
Regulatory Information
Declaration of Conformity
Trade Name: SONY
Model No.: PCV-7742
Responsible
Party:
Address: 680 Kinderkamack Rd
Telephone: 201-930-6972
This phone number is for FCC-related matters
only.
This device complies with Part 15 of the FCC
rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful
interference, and
(2) this device must accept any interference
received, including interference that may cause
undesired operation.
Model No.: PCVA-IMB4A
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference,
and
(2) this device must accept any interference
received, including interference that may cause
undesired operation.
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications.
Sony Electronics Inc.
Oradell, NJ 07649
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to radio
or television reception, which can be determined by
turning the equipment off and on, the user is
encouraged to try to correct the interference by one
or more of the following measures:
❑ Reorient or relocate the receiving antenna.
❑ Increase the separation between the
equipment and the receiver.
❑ Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.
❑ Consult the dealer or an experienced radio/
TV technician for help.
You are cautioned that any changes or
modifications not expressly approved in this
manual could void your authority to operate this
equipment.
Only peripherals (computer input/output devices,
terminals, printers, etc.) that comply with FCC
Class B limits may be attached to this computer
product. Operation with noncompliant peripherals
is likely to result in interference to radio and
television reception.
All cables used to connect peripherals must be
shielded and grounded. Operation with cables,
connected to peripherals, that are not shielded and
grounded, may result in interference to radio and
television reception.
FCC Part 68
This equipment complies with Part 68 of the FCC
rules. The FCC Ringer Equivalence Number (REN)
for this equipment is 0.79B. If requested, this
information must be provided to the telephone
company.
This modem uses the USOC RJ-11 telephone jack.
The REN is used to determine the quantity of
devices which may be connected to the telephone
line. Excessive RENs on the telephone line may
result in the devices not ringing in response to an
incoming call. In most, but not all areas, the sum of
the RENs should not exceed five (5.0). To be certain
of the number of devices that may be connected to
the line, as determined by the total RENs, contact
the telephone company to determine the maximum
REN for the calling area.
vi
VAIO Digital Studio System Reference Manual
If the terminal equipment causes harm to the
telephone network, the telephone company will
notify you in advance that temporary
discontinuance of service may be required. But if
advance notice is not practical, the telephone
company will notify the customer as soon as
possible. Also, you will be advised of your right to
file a complaint with the FCC if you believe it is
necessary.
The telephone company may make changes in its
facilities, equipment, operations or procedures that
could affect the operations of the equipment. If this
happens, the telephone company will provide
advance notice in order for you to make the
necessary modifications in order to maintain
uninterrupted service.
If trouble is experienced with this modem, for
repair or warranty information, please contact
1-888-4-SONY-PC, or write to the Sony Customer
Information Center, 12451 Gateway Blvd., Fort
Myers, FL 33913. If the trouble is causing harm to
the telephone network, the telephone company may
request that you remove the equipment from the
network until the problem is resolved.
Repair of this equipment should be made only by a
Sony Service Center or Sony authorized agent. For
the Sony Service Center nearest you, call
1-888-4-SONY-PC (1-888-476-6972).
This equipment cannot be used on public coin
service provided by the telephone company.
Connection to Party Line Service is subject to state
and possible provincial tariffs. (Contact the state or
provincial utility service commission, public
service commission, or corporation commission for
information.)
Telephone Consumer Guidelines (Canada)
Please refer to your telephone directory under
‘Privacy Issues’ and/or ‘Terms of Service.’ For
more detailed information, please contact:
CRTC
Terrasses de la Chaudiére, Tour centrale
1 promenade du Portage, 5 étage Hull PQ K1A
0N2.
This Class B digital apparatus complies with
Canadian ICES-003.
Cet àppareil numérique de la classe B est conforme
à la norme NMB-003 du Canada.
Telephone Consumer Protection Act of 1991 (United States)
The Telephone Consumer Protection Act of 1991
makes it unlawful for any person to use a computer
or other electronic device to send any message via a
telephone facsimile machine unless such message
clearly contains, in a margin at the top or bottom of
each transmitted page or on the first page of the
transmission, the date and time it is sent and an
identification of the business, other entity, or
individual sending the message, and the telephone
number of the sending machine or such business,
other entity, or individual.
In order to program this information into your
facsimile machine, see your fax software
documentation.
Disposal of Lithium Battery
You can return your unwanted lithium batteries to
your nearest Sony Service Center or Factory
Service Center.
✍ In some areas the disposal of lithium
batteries in household or business trash
may be prohibited.
For the Sony Service Center nearest you, call
1-888-476-6972 in the United States or
1-800-961-7669 in Canada.
! Do not handle damaged or leaking
lithium batteries.
vii
! Ne pas manipuler les batteries au
lithium qui fuient ou sont
endommagées.
! Une batterie non conforme
présente un danger d'explosion. La
remplacer seulement par une
batterie identique ou de type
équivalent recommandé par le
fabricant. Évacuer les batteries
usées selon les directives du
fabricant.
! Danger of explosion if battery is
incorrectly replaced. Replace only
with the same or equivalent type
recommended by the
manufacturer. Discard used
batteries according to the
manufacturer’s instructions.
! The battery pack used in this
device may present a fire or
chemical burn hazard if
mistreated. Do not disassemble,
heat above 212°F (100°C), or
incinerate. Dispose of used battery
promptly. Keep away from
children.
! La manutention incorrecte du
module de batterie de cet appareil
présente un risque d'incendie ou
de brûlures chimiques. Ne pas
démonter, incinérer ou exposer à
une température de plus de 100°C.
Évacuer promptement la batterie
usée. Garder hors de portée des
enfants.
viii
VAIO Digital Studio System Reference Manual
Industry Canada Notice
NOTICE: The Industry Canada label identifies
certified equipment. This certification means that
the equipment meets certain telecommunications
network protective, operational and safety
requirements as prescribed in the appropriate
Terminal Equipment Technical Requirements
document(s). The Department does not guarantee
the equipment will operate to the user’s satisfaction.
Before installing this equipment, users should
ensure that it is permissible to be connected to the
facilities of the local telecommunications company.
The equipment must also be installed using an
acceptable method of connection.
The customer should be aware that compliance with
the above conditions may not prevent degradation
of service in some situations.
Repairs to certified equipment should be
coordinated by a representative designated by the
supplier. Equipment malfunctions or any repairs or
alterations made by the user to this equipment may
give the telecommunications company cause to
request that the user disconnect the equipment.
Users should ensure for their own protection that
the electrical ground connections of the power
utility, telephone lines and internal metallic water
pipe system, if present, are connected together. This
precaution may be particularly important in rural
areas.
CAUTION: Users should not attempt to make such
connections themselves, but should contact the
appropriate electrical inspection authority, or
electrician, as appropriate.
NOTICE: The Ringer Equivalence Number (REN)
assigned to each terminal device provides an
indication of the maximum number of terminals
allowed to be connected to a telephone interface.
The termination on an interface may consist of any
combination of devices subject only to the
requirement that the sum of the Ringer Equivalence
Numbers of all the devices does not exceed 5. The
Ringer Equivalence Number for this equipment is
0.79B.
Avis de l’Industrie Canada
AVIS : L’étiquette d’Industrie Canada identifie le
matériel homologué.
Cette étiquette certifie que le matériel est conforme
aux normes de protection, d’exploitation et de
sécurité des réseaux de télécommunications,
comme le prescrivent les documents concernant les
exigences techniques relatives au matériel terminal.
Le Ministère n’assure toutefois pas que le matériel
fonctionnera à la satisfaction de l’utilisateur.
Avant d’installer ce matériel, l’utilisateur doit
s’assurer qu’il est permis de le raccorder aux
installations de l’entreprise locale de
télécommunication. Le matériel doit également être
installé en suivant une méthode acceptée de
raccordement. L’abonné ne doit pas oublier qu’il est
possible que la conformité aux conditions énoncées
ci-dessus n’empêche pas la dégradation du service
dans certaines situations.
Les réparations de matériel homologué doivent être
coordonnées par un représentant désigné par le
fournisseur. L’entreprise de télécommunications
peut demander à l’utilisateur de débrancher un
appareil à la suite de réparations ou de
modifications effectuées par l’utilisateur ou à cause
de mauvais fonctionnement.
Pour sa propre protection, l’utilisateur doit s’assurer
que tous les fils de mise à la terre de la source
d’énergie électrique, des lignes téléphoniques et des
canalisations d’eau métalliques, s’il y en a, sont
raccordés ensemble. Cette précaution est
particulièrement importante dans les régions
rurales.
Avertissement : L’utilisateur ne doit pas tenter de
faire ces raccordements lui-même; il doit avoir
recours à un service d’inspection des installations
électriques, ou à un électricien, selon le cas.
AVIS : L’indice d’équivalence de la sonnerie (IES)
assigné à chaque dispositif terminal indique le
nombre maximal de terminaux qui peuvent être
raccordés à une interface.
La terminaison d’une interface téléphonique peut
consister en une combination de quelques
dispositifs, à la seule condition que la somme
d’indices d’équivalence de la sonnerie de tous les
dispositifs n’excède pas 5. L’indice d’équivalence
de la sonnerie de ce matériel est de 0.79B.
Contents
NOTICE ....................................................................................................... ii
Owner’s Record................................................................................... ii
Safety Information and Caution ...................................................... iii
Regulatory Information.......................................................................v
FCC Part 68 ...........................................................................................v
Telephone Consumer Protection Act of 1991
(United States) .................................................................................... vi
Telephone Consumer Guidelines (Canada)................................... vi
Disposal of Lithium Battery ............................................................ vii
Industry Canada Notice.................................................................. viii
Avis de l’Industrie Canada............................................................. viii
Chapter 1 — Identifying Components................................1
Front View....................................................................................................2
Drives.....................................................................................................3
Buttons and Switches ..........................................................................4
Indicators...............................................................................................5
Connectors ............................................................................................6
Rear View .....................................................................................................7
Icons .......................................................................................................8
I/O Connectors ..................................................................................10
Expansion Slots ..................................................................................14
Chapter 2 — Configuring Your System ............................15
Accessing the BIOS Setup Utility............................................................16
Changing the Display's Power Management Settings.........................17
ix
x
VAIO Digital Studio System Reference Manual
Chapter 3 — Removing, Installing, and Replacing
Components....................................................................... 23
Removing the Side Cover .......................................................................24
Replacing the Side Cover ........................................................................25
Removing a PCI Add-in Card ................................................................26
Installing a PCI Add-In Card .................................................................28
Replacing the Lithium Battery ...............................................................30
Removing a Memory Module ................................................................33
Installing System Memory ......................................................................34
Removing a Slot Cover.............................................................................37
Covering an Open I/O Slot ....................................................................38
Installing a 3.5-inch Internal Hard Disk Drive......................................39
To identify additional hard disk space ...........................................43
Removing the Power Supply................................................................... 44
Replacing the Power Supply ...................................................................45
Chapter 4 — System Board ............................................... 47
Memory Module (DDR-DIMM) Slots ....................................................48
Power Supply and Aux Power Headers ...............................................49
CLR CMOS Jumper................................................................................... 51
Chapter 5 — CMOS Setup Options ................................... 53
Main Screen ...............................................................................................55
Advanced Screen ......................................................................................57
Power Screen..............................................................................................59
Boot Screen ................................................................................................60
Exit Screen ..................................................................................................61
Chapter 6 — Miscellaneous Technical Information......... 63
User and Supervisor Passwords ............................................................64
Beep Code Error Messages .....................................................................65
PCI Configuration Status and Error Messages ....................................66
DMA Channel Assignments ...................................................................68
System I/O Address Map .......................................................................69
Memory Map ............................................................................................71
IRQ Settings ...............................................................................................72
xi
Chapter 7 — Specifications................................................73
Processors ..................................................................................................73
Chipset ......................................................................................................73
AGP Bus .....................................................................................................73
PCI Bus ......................................................................................................74
Memory Modules ....................................................................................74
Memory Configurations ......................................................................... 74
L2 Cache ....................................................................................................74
Graphics ....................................................................................................74
Audio .........................................................................................................75
Communications .....................................................................................75
Giga Pocket I/O.........................................................................................75
I/O and Expansion Slots .........................................................................76
Floppy Disk Drive and Controller ........................................................76
Hard Drives and Controllers .................................................................76
Optical Drives ............................................................................................ 76
System BIOS .............................................................................................77
Index ................................................................................... 79
xii
VAIO Digital Studio System Reference Manual
Chapter 1
Identifying Components
The following sections identify and describe each component that is
visible from the exterior of the VAIO Digital Studio™ computer. Internal
components are identified in another section of this manual.
1
2
VAIO Digital Studio System Reference Manual
Front View
✍ The computer shown in this section is equipped with Giga Pocket features. Your system may
differ, depending on the configuration you purchased.
Drives
Floppy disk drive
Memory Stick
media slot
Identifying Components
Optical disc
drive #1
Optical disc
drive #2
3
Drive Description
Optical disc drive #1 See Specifications sheet for details.
Optical disc drive #2 See Specifications sheet for details.
*
*
Floppy disk drive 3.5-inch, 1.44 MB.
Memory Stick® media slot Accommodates Memory Stick® media.
* The Specifications sheet is supplied with your computer's original documentation.
4
VAIO Digital Studio System Reference Manual
Buttons and Switches
Power on/off
Optical disc eject
Floppy disk eject
Button or switch Description
Optical disc eject button Automatically opens and closes the optical drive
tray.
Floppy disk eject button Ejects a floppy disk.
Power on/off switch Turns system power on, off, or into Stand by
mode.
Indicators
Floppy disk
drive access
Hard disk Optical disc
drive access
Identifying Components
drive access
Power/Stand by
5
Indicator Description
Floppy disk drive access
indicator
On (green) indicates floppy disk drive
activity.
Hard disk drive access indicator On (red) indicates hard disk drive activity.
Optical drive access indicator On (red) indicates optical drive activity.
Power/Stand by indicator Stand by (amber) indicates the computer
is in Stand by mode.
On (blue) indicates the computer is out of
Stand by mode, ready to use.
Off (no color) indicates the computer is
turned off, or in hibernation mode.
6
VAIO Digital Studio System Reference Manual
Connectors
Video In jack
S-Video In port
Audio R In jackAudio L In jack
i.LINK port
USB1, USB2 ports
Connector Description
Audio L In jack Connects to an audio cable (supplied).
Video In jack Connects to a video cable (supplied).
S-Video In port Connects to an S-video cable (optional).
Audio R In jack Connects to an audio cable (supplied).
i.LINK® port
(IEEE 1394)
*
Connects to a digital device that has a 4-pin i.LINK
header.
USB1, USB2 ports Connects to USB devices.
* To connect to a 6-pin i.LINK device, use the i.LINK port on the back of the system. A 6-pin i.LINK
connector can supply power from the computer to the device if the device also has a 6-pin i.LINK port.
A 4-pin i.LINK connector cannot supply power to the device.
Rear View
Mouse
Keyboard
USB3, USB4
Ethernet
Printer/Parallel
Headphones
VGA Monitor port
AV Out jacks
port
i.LINK port
Serial
Line In
Microphone
AV In jacks
Line
Identifying Components
KEYBOARD
MOUSE
NETWORK
USB
ACT
LINK
PRINTER
i.LINK
S400
HEADPHONES
SERIAL
LINE IN
MIC
4
MONITOR
3
VIDEO
VIDEO 1
OUTPUT
INPUT
2
S VIDEO
S VIDEO
/
VIDEO
/
VIDEO
VHF
/UHF
AUDIO
AUDIO
1
LINE
7
AC Input port
VHF/UHF port
Telephone
✍ The computer shown in this section is equipped with Giga Pocket features. Your system may
differ, depending on the configuration you purchased.
8
Icons
VAIO Digital Studio System Reference Manual
KEYBOARD
MOUSE
NETWORK
USB
i.LINK
S400
HEADPHONES
LINE IN
MIC
PRINTER
SERIAL
ACT
LINK
4
MONITOR
3
VIDEO
VIDEO 1
OUTPUT
INPUT
2
S VIDEO
S VIDEO
/
VIDEO
/
VIDEO
VHF
/UHF
AUDIO
AUDIO
1
LINE
Icon Label Area
Icon Label Area
Icon Description
Mouse port
Keyboard port
Universal Serial Bus (USB) port
Ethernet port (for LAN connection only)
Serial port
Icon Description
Printer/Parallel port
i.LINK® (IEEE 1394) port
Headphones
Line In jack (audio)
Microphone jack
VGA Monitor port
Line jack
Telephone j a c k
Identifying Components
9
VHF/UHF port
Audio In jack
Audio Out jack
*
*
*
Video/S-video In jack
Video/S-video Out jack
* On models equipped with Giga Pocket features.
*
*
10
VAIO Digital Studio System Reference Manual
I/O Connectors
The following section identifies the various I/O connectors.
Keyboard and Mouse Ports
The keyboard and mouse ports are physically identical and have the
same pinout. They are standard 6-pin PS/2® compatible female ports.
2
31
4
5
6
USB Ports
The USB ports are standard 4-pin USB ports. Two USB ports are located at
the front, and two at the rear of the system.
Ethernet Port
The Ethernet port at the rear of the system is used to connect to a
10BASE-T/100BASE-TX Ethernet network.
Ethernet
Identifying Components
Serial Port
The serial port is a standard 9-pin DB-9 male port.
11
6
9
1
5
Printer/Parallel Port
The printer/parallel port is a standard 25-pin DB-25 female port.
25
14
13
1
VGA Monitor Port
The monitor port is a standard 15-pin female high-density VGA-type port
located on the AGP plug-in card.
10
15
11
6
5
1
12
VAIO Digital Studio System Reference Manual
Mic, Line In, and Headphones Jacks
The microphone, line in, and headphones jacks are physically identical,
but have different connections. They are standard 3.5 mm stereo
mini-jacks.
Headphones Line In Mic
Connector Description
Headphones 1.0 Vrms (typical).
Mic Electret condenser microphone input.
Line In 1.0 Vrms (typical), 10 Kohm impedance.
Telephone and Line Jacks
The telephone and line jacks are physically identical and have identical
connections. They are standard RJ-11 female phone jacks. However, the
line jack is for connecting to a telephone line that comes from the wall,
and the telephone jack is for connecting the computer to a telephone.
The modem installed on your computer may differ depending on the
configuration you purchased.
Line Phone
Identifying Components
i.LINK (IEEE 1394) Ports
13
The 6-pin i.LINK® port on the back of the system can supply power from
the computer to a device if the device also has a 6-pin i.LINK port. The
6-pin port supplies 10 V to 12 V and a maximum power of 6 watts.
✍ i.LINK is a trademark of Sony used only to designate that a product contains an IEEE 1394
connection. The i.LINK connection may vary, depending on the software applications,
operating system and compatible i.LINK devices. All products with an i.LINK connection may
not communicate with each other.
✍ Refer to the documentation that came with your compatible i.LINK device for information on
operating conditions and proper connections. Before connecting compatible i.LINK PC
peripherals to your system, such as an optical disc or hard disk drive, confirm their operating
system compatibility and required operating conditions.
The 4-pin i.LINK port at the bottom of the front panel does not supply
power.
6-pin i.LINK port
(IEEE 1394)
On back of
system
4-pin i.LINK port
(IEEE 1394)
At bottom of
front panel
14
VAIO Digital Studio System Reference Manual
Expansion Slots
There is one PCI slot available for expansion (slot No. 3), if your system is
equipped with Giga Pocket features.
PCI slot No. 1 is occupied by the fax/modem card. The modem has two
jacks (Line In and Phone).
PCI slot No. 2 is available for expansion if your system does not have a
Giga Pocket card installed.
There is one AGP slot (No. 4), which is occupied by an AGP card.
Slot No. 4 (AGP)
Slot No. 3 (PCI)
Slot No. 2 (Giga Pocket card)
Slot No. 1 (Fax/modem card)
✍ The computer shown in this section is equipped with Giga Pocket features. Your system may
differ, depending on the configuration you purchased.
Chapter 2
Configuring Your System
This chapter contains information on configuring your system.
Configuring your system can consist of the following:
❑ Making changes to the BIOS settings.
❑ Making changes to the display's power management settings.
15
16
VAIO Digital Studio System Reference Manual
Accessing the BIOS Setup Utility
You must access the BIOS Setup Utility to make changes to the BIOS
settings (see “CMOS Setup Options” on page 53 for information on BIOS
settings).
! Before rebooting the system, save and close all open files, and exit open
applications.
1 Reboot your computer by selecting Shut Down... from the Start
menu, then selecting Restart.
2 When the Sony logo appears, press F3. The following message
appears at the bottom of the screen.
Press <F2> for setup.
3 Press F2.
Each menu presents options for modifying the system configuration.
Use the left and right arrow keys to select a menu from the menu bar.
Use the up and down arrow keys to select items within a menu. Once
an item is highlighted, use the plus/minus (+/-) keys to modify a
setting.
If an item has a triangle ( ) to its left, this indicates that a sub-menu
of options is available. Press ENTER to access a sub-menu. If a submenu contains items with a triangle, there is another layer of options
from which to select.
4 Once you select an option, press ESC to back out of each menu until
you reach the top level, where the menu bar appears.
5 To exit the BIOS setup utility, press ESC from any top-level screen and
follow the prompts.
Configuring Your System
17
Changing the Display's Power Management Settings
A display that has power management capability is designed to operate
on reduced power or shut itself off after the system has been idle for a
specified period of time.
1 From the Start menu, point to Settings, click Control Panel, then click
Display.
The Power Options Properties dialog box opens, with the Power
Schemes tab displayed.
2 Select the power scheme that is most appropriate for the way you use
your computer.
To change a power scheme, change the settings for Turn off monitor,
and Turn off hard disks, System stand by, and System hibernates.
Loading...