Sony PCV-L640 Reference Manual

Notice to Users

© 2000 Sony Electronics Inc. Reproduction in whole or in part without written permission is prohibited. All rights reserved. This manual and the software described herein, in whole or in part, may not be reproduced, translated, or reduced to any machinereadable form without prior written approval.

SONY ELECTRONICS INC. PROVIDES NO WARRANTY WITH REGARD TO THIS MANUAL, THE SOFTWARE, OR OTHER INFORMATION CONTAINED HEREIN AND HEREBY EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE WITH REGARD TO THIS MANUAL, THE SOFTWARE, OR SUCH OTHER INFORMATION. IN NO EVENT SHALL SONY ELECTRONICS INC. BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, OR SPECIAL DAMAGES, WHETHER BASED ON TORT, CONTRACT, OR OTHERWISE, ARISING OUT OF OR IN CONNECTION WITH THIS MANUAL, THE SOFTWARE, OR OTHER INFORMATION CONTAINED HEREIN OR THE USE THEREOF.

Sony Electronics Inc. reserves the right to make any modification to this manual or the information contained herein at any time without notice. The software described herein is governed by the terms of a separate user license agreement.

This product contains software owned by Sony and licensed by third parties. Use of such software is subject to the terms and conditions of license agreements enclosed with this product. Some of the software may not be transported or used outside the United States. Software specifications are subject to change without notice and may not necessarily be identical to current retail versions.

Updates and additions to software may require an additional charge. Subscriptions to online service providers may require a fee and credit card information. Financial services may require prior arrangements with participating financial institutions.

Sony, VAIO, the VAIO logo, VAIO Smart, VAIO Digital Studio, VAIO Slimtop, Media Park, DVgate, Media Bar, Handycam, Mavica, PictureGear, i.LINK, and Memory Stick are trademarks of Sony. Intel, Pentium, and Celeron are trademarks of Intel Corporation. Microsoft, Windows, and the Windows 98 logo are registered trademarks of Microsoft Corporation.

This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

All other trademarks are trademarks or registered trademarks of their respective owners.

Owner’s Record

The model number and serial number are located on the back of your VAIO Record the serial number in the space provided here. Refer to the model and serial number when you call your Sony Service Center.

Model Number: PCV-L640 Serial Number:________________________

computer.

iii

VAIO Computer Reference Manual

Safety Information and Caution

CD-RW Laser Diode Properties

Max. Laser output (read)

UJDA310V UJDA310T UJDA320

1.8 mW 1.8 mW 1.8 mW

Max. Laser output (write)

UJDA310V UJDA310T UJDA320

21 mW 21 mW 21 mW

Wavelength

UJDA310V UJDA310T UJDA320

773-797 nm 773-797 nm 780-795 nm

To prevent fire or shock hazard, do

❑

not expose your desktop to rain or moisture.To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.

Never install modem or telephone

❑

wiring during a lightning storm. Never install telephone jacks in wet

❑

locations unless the jack is specifically designed for wet locations.

Never touch uninsulated telephone

❑

wire or terminals unless the telephone line has been disconnected at the network interface.

Use caution when installing or

❑

modifying telephone lines. Avoid using the modem during an

❑

electrical storm. Do not use the modem or a telephone

❑

to report a gas leak in the vicinity of the leak.

The socket outlet shall be installed

❑

near the equipment and shall be easily accessible.

To change the backup battery, contact your nearest Sony Service Center.

Caution - The use of optical instruments with this product will increase eye hazard. As the laser beam used in this product is harmful to the eyes, do not attempt to disassemble the drive cabinet. Refer servicing to qualified personnel only.

Danger - Visible and invisible laser radiation when open. Avoid direct exposure to beam.

For CD-RW: Danger - Invisible laser radiation when open. Avoid direct exposure to beam.

Caution: For ADSL modem models, to reduce the risk of fire, use only No. 26 AWG or larger telecommunication line cord.

Pour prévenir tout risque d’incendie

❑

ou d’électrocution, garder cet appareil à l’abri de la pluie et de l’humidité.

Pour prévenir tout risque

❑

d’électrocution, ne pas ouvrir le châssis de cet appareil et ne confier son entretien qu’à une personne qualifiée.

Ne jamais effectuer l’installation de fil

❑

modem ou téléphone durant un orage électrique.

Ne jamais effectuer l’installation

❑

d’une prise téléphonique dans un endroit mouillé à moins que la prise soit conçue à cet effet.

Ne jamais toucher un fil téléphonique

❑

à découvert ou un terminal à moins que la ligne téléphonique n’ait été débranché de l’interface réseau.

Soyez très prudent lorsque vous

❑

installez ou modifiez les lignes téléphoniques.

Évitez d’utiliser le modem durant un

❑

orage électrique. N'utilisez pas le modem ni le

❑

téléphone pour prévenir d'une fuite de gaz vous êtes près de la fuite.

L’appareil doit être le plus près

❑

possible d’une prise murale pour en faciliter l’accès.

Pour changer la pile de rechange, veuillez contacter votre centre de service Sony le plus près.

Avertissement - L'utilisation d'instruments optiques avec ce produit augmente les risques pour les yeux. Puisque le faisceau laser utilisé dans ce produit est dommageable pour les yeux, ne tentez pas de désassembler le boîtier. Adressez-vous à un agent de service qualifié.

Danger : Radiation laser visible et invisible si ouvert. Évitez l’exposition directe au faisceau.

Pour les CD-RW : Danger : Radiation laser visible et invisible si ouvert. Évitez l'exposition directe au faisceau.

Attention : Pour ADSL modele modem, afin de réduire les risques d'incendie, n'utilisez qu'un cordon de communication N0. 26 AWG ou plus gros.

For questions regarding your product or for the Sony Service Center nearest you, call 1-888-476-6972 in the United States or 1-800-961-7669 in Canada.

Sony Customer Support can be reached at www.sony.com.pcsupport.

VAIO Computer Reference Manual

Regulatory Information

Declaration of Conformity

Trade Name: SONY Model No.: PCV-L640 Responsible Party: Sony Electronics Inc. Address: 1 Sony Drive

Telephone: 201-930-6970 This phone number is for FCC-related matters

only. This device complies with Part 15 of FCC Rules.

Operation is subject to the two following conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: :

Reorient or relocate the receiving

❑

antenna. Increase the separation between the

❑

equipment and the receiver. Connect the equipment into an outlet

❑

on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced

❑

radio/TV technician for help.

Park Ridge, NJ 07656

You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.

Only peripherals (computer input/output devices, terminals, printers, etc.) that comply with FCC Class B limits may be attached to this computer product. Operation with noncompliant peripherals is likely to result in interference to radio and television reception.

All cables used to connect peripherals must be shielded and grounded. Operation with cables, connected to peripherals, that are not shielded and grounded, may result in interference to radio and television reception.

FCC Part 68

This equipment complies with Part 68 of the FCC rules. The FCC Ringer Equivalence Number (REN) for this equipment is 0.7. If requested, this information must be provided to the telephone company.

This modem uses the USOC RJ-11 telephone jack.

The REN is used to determine the quantity of devices which may be connected to the telephone line. Excessive RENs on the telephone line may result in the devices not ringing in response to an incoming call. In most, but not all areas, the sum of the RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to the line, as determined by the total RENs, contact the telephone company to determine the maximum REN for the calling area.

If the terminal equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But if advance notice is not practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary.

The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the operations of the equipment. If this happens, the telephone company will provide advance notice in order for you to make the necessary modifications in order to maintain uninterrupted service.

If trouble is experienced with this modem, for repair or warranty information, please contact 1-888-4SONY-PC, or write to the Sony Customer Information Center, 12451 Gateway Blvd., Fort Myers, FL 33913. If the trouble is causing harm to the telephone network, the telephone company may request that you remove the equipment from the network until the problem is resolved.

Repair of this equipment should be made only by a Sony Service Center or Sony authorized agent. For the Sony Service Center nearest you, call 1-888-4SONYPC (1-888-476-6972).

This equipment cannot be used on public coin service provided by the telephone company. Connection to Party Line Service is subject to state and possible provincial tariffs. (Contact the state or provincial utility service commission, public service commission, or corporation commission for information.)

Telephone Consumer Protection Act of 1991 (United States)

The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device to send any message via a telephone facsimile machine unless such message clearly contains, in a margin at the top or bottom of each transmitted page or on the first page of the transmission, the date and time it is sent and an identification of the business, other entity, or individual sending the message, and the telephone number of the sending machine or such business, other entity, or individual.

In order to program this information into your facsimile, see your fax software documentation

vii

VAIO Computer Reference Manual

Telephone Consumer Guidelines (Canada)

Please refer to your telephone directory under ‘Privacy Issues’ and/or ‘Ter ms of Service.’ For more detailed information, please contact:

CRTC Terrasses de la Chaudiére, Tour centrale 1 promenade du Portage, 5 étage Hull PQ K1A 0N2.

This Class B digital app ar atus complies with Canadian ICES-003.

Cet àppareil numérique de la classe B est conforme à la norme NMB -003 du Canada.

DISPOSAL OF LITHIUM ION BATTERY

You can return your unwanted lithium ion batteries to your nearest Sony Service Center or Factory Service Center.

In some areas the disposal of lithium

✍

ion batteries in household or business trash may be prohibited.

For the Sony Service Center nearest you, call 1-888-476-6972 in the United States or 1-800-961-7669 in Canada.

Do not handle damaged or leaking lithium ion batteries.

Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Discard used batteries according to the manufacturer’s instructions.

The battery pack used in this device may present a fire or chemical burn hazard if mistreated. Do not disassemble, heat above 212°F (100°C) or incinerate. Dispose of used battery promptly. Keep away from children.

Ne pas manipuler les batteries au lithium-ion qui fuient ou sont endommagées.

Une batterie non conforme présente un danger d'explosion. La remplacer seulement par une batterie identique ou de type équivalent recommandé par le fabricant. Évacuer les batteries usées selon les directives du fabricant.

La manutention incorrecte du module de batterie de cet appareil présente un risque d'incendie ou de brûlures chimiques. Ne pas démonter, incinérer ou exposer à une température de plus de 100°C. Évacuer promptement la batterie usée. Garder hors de portée des enfants.

viii

INDUSTRY CANADA NOTICE

NOTICE: The Industry Canada label identifies certified equipment. This certification means that the equipment meets certain telecommunications network protective, operational and safety requirements as prescribed in the appropriate Terminal Equipment Technical Requirements document(s). The Department does not guarantee the equipment will operate to the userís satisfaction.

Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company. The equipment must also be installed using an acceptable method of connection.

The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations.

Repairs to certified equipment should be coordinated by a representative designated by the supplier. Equipment malfunctions or any repairs or alterations made by the user to this equipment may give the telecommunications company cause to request that the user disconnect the equipment.

Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines and internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas.

CAUTION: Users should not attempt to make such connections themselves, but should contact the appropriate electrical inspection authority, or electrician, as appropriate.

NOTICE: The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of the maximum number of terminals allowed to be connected to a telephone interface. The termination on

an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed 5. The Ringer Equivalence Number for this equipment is 0.7.

AVIS D E L’INDUSTRIE CANADA

AVI S: L’étiquette d’Industrie Canada identifie le matériel homologué.

Cette étiquette certifie que le matériel est conforme aux normes de protection, d’exploitation et de sécurité des réseaux de télécommunications, comme le prescrivent les documents concernant les exigences techniques relatives au matériel terminal. Le Ministère n’assure toutefois pas que le matériel fonctionnera à la satisfaction de l’utilisateur.

Ava nt d’installer ce matériel, l’utilisateur doit s’assurer qu’il est permis de le raccorder aux installations de l’entreprise locale de télécommunication. Le matériel doit également être installé en suivant une méthode acceptée de raccordement. L’abonné ne doit pas oublier qu’il est possible que la conformité aux conditions énoncées cidessus n’empêche pas la dégradation du service dans certaines situations.

Les réparations de matériel homologué doivent être coordonnées par un représentant désigné par le fournisseur. L’entreprise de télécommunications peut demander à l’utilisateur de débrancher un appareil à la suite de réparations ou de modifications effectuées par l’utilisateur ou à cause de mauvais fonctionnement.

Pour sa propre protection, l’utilisateur doit s’assurer que tous les fils de mise à la terre de la source d’énergie électrique, des lignes téléphoniques et des canalisations d’eau métalliques, s’il y en a, sont raccordés

VAIO Computer Reference Manual

ensemble. Cette précaution est particulièrement importante dans les régions rurales.

Avertissement: L’utilisateur ne doit pas tenter de faire ces raccordements lui-même; il doit avoir recours à un service d’inspection des installations électriques, ou à un électricien, selon le cas.

AVI S : L’indice d’équivalence de la sonnerie (IES) assigné à chaque dispositif terminal indique le nombre maximal de terminaux qui peuvent être raccordés à une interface.

La terminaison d’une interface téléphonique peut consister en une combination de quelques dispositifs, à la seule condition que la somme d’indices d’équivalence de la sonnerie de tous les dispositifs n’excède pas

5. L’indice d’équivalence de la sonnerie de ce matériel est de 0.7.

Notice to Users .................................................................................... ii

Safety Information and Caution ......................................................iii

Regulatory Information.......................................................................v

FCC Part 68 ......................................................................................... vi

Telephone Consumer Protection Act of 1991 (United States) ..... vi

Telephone Consumer Guidelines (Canada).................................. vii

DISPOSAL OF LITHIUM ION BATTERY ....................................vii

INDUSTRY CANADA NOTICE....................................................viii

AVIS DE L’INDUSTRIE CANADA ..............................................viii

Chapter 1 — Identifying Components

Front View .......................................................................................2

Drives ...................................................................................................3

Buttons and Switches .........................................................................4

Indicators ..............................................................................................5

Connectors ...........................................................................................6

Slots .......................................................................................................7

Rear View ........................................................................................8

I/O Connectors ....................................................................................9

Chapter 2 — Configuring Your System

Accessing the CMOS Setup Utility..............................................14

Changing the Display's Power Management Settings ............. 15

Configuring the System Board ....................................................17

CMOS Jumper ....................................................................................17

CPU Frequency Ratio Multiplier Switches ....................................19

AGP_INT Switch................................................................................20

VGA Switch ........................................................................................21

xii

VAIO Slimtop™ Reference Manual

Chapter 3 — Removing, Installing, and Replacing Components

Removing the System Cover .......................................................24

Replacing the System Cover ........................................................25

Installing an Add-In Card ............................................................26

Removing an Add-in Card ...........................................................27

Setting the Configuration Switches ............................................29

Setting the CMOS Jumper ............................................................30

Replacing the Lithium Battery .....................................................31

Installing System Memory ...........................................................34

Removing a Memory Module .....................................................36

Replacing the Hard Drive ...........................................................41

Removing a Slot Cover..................................................................44

Covering an Open I/O Slot ..........................................................45

Chapter 4 — System Board

Connectors ......................................................................................48

Front Panel Header............................................................................48

Diskette Drive (FLOPPY) Connector ..............................................49

IDE Connectors .................................................................................50

PCI Slot Connectors...........................................................................51

Memory Module (DIMM) Connectors ..........................................52

Power (ATX PWR) Connector .........................................................53

Fan (CPU FAN, CTRL PWR) Connectors ......................................54

Keyboard/Mouse (KB/MOUSE) Connector ................................55

USB Connectors .................................................................................56

PRINTER, SERIAL, and VGA MONITOR Connectors ...............57

LCD Connector ..................................................................................59

Wake On LAN (WOL_CON) Connector .......................................60

LINE IN and LINE OUT Connectors .............................................61

PHONE and MIC Connectors .........................................................62

Sony Memory Stick Slot Connector ................................................63

i.LINK Interface Header Connectors .............................................64

i.LINK Connectors ............................................................................65

Auxiliary Audio In Connector .........................................................66

Configuration Jumper and Switches ..........................................67

CMOS Jumper ...................................................................................67

Configuration Switches (SW)...........................................................68

Contents

Chapter 5 — Fax/Modem Card

Chapter 6 — Ethernet Card

Chapter 7 — CMOS Setup Options

STANDARD CMOS SETUP Screen ............................................76

BIOS FEATURES SETUP Screen..................................................77

CHIPSET FEATURES SETUP Screen.......................................... 80

POWER MANAGEMENT SETUP Screen..................................82

PNP AND PCI SETUP Screen .....................................................84

LOAD SETUP DEFAULTS Screen ..............................................86

SUPERVISOR PASSWORD Screen .............................................86

USER PASSWORD Screen............................................................86

IDE HDD AUTO DETECTION Screen.......................................86

SAVE & EXIT SETUP Screen........................................................86

EXIT WITHOUT SAVING Screen ...............................................86

Chapter 8 — Miscellaneous Technical Information

About User and Supervisor Passwords .....................................88

Beep Code Error Messages ..........................................................89

PCI Configuration Status and Error Messages ......................... 90

DMA Channel Assignments .......................................................91

IRQ Assignments ........................................................................92

System I/O Address Map ............................................................93

Memory Map.................................................................................. 95

xiii

Chapter 9 — Specifications

Processor .......................................................................................97

Chipset ...........................................................................................97

PCI Bus ..........................................................................................97

Memory Modules (DIMMs) .......................................................97

DIMM Configurations ..................................................................98

L2 Cache .........................................................................................98

Graphics ........................................................................................98

xiv

VAIO Slimtop™ Reference Manual

Audio ...............................................................................................99

Communications ..........................................................................99

I/O and Expansion Slots .............................................................99

i.LINK Interface ...........................................................................100

Ethernet Interface ........................................................................100

Drives and Controllers ...............................................................100

System CMOS .............................................................................101

Chapter 1 Identifying Components

The following sections identify and describe each component that is visible from the exterior of the VAIO identified in Chapters 3, 4, and 5 of this manual.

Computer. Internal components are

VAIO Slimtop™ Reference Manual

Front View

Flip-down panel

FD DISC HD

SHA0001.VSD

Identifying Components

Drives

FD DISC HD

Floppy disk driveCD-RW disc drive

SHA0002.VSD

Drive Description

Diskette drive 3.5-inch, 1.44 Mbyte. CD-RW drive

* The CD-RW/CD-R/CD-ROM data transfer standard 1X rate is 150 kbytes/s. Data on a CD-RW is read at a

variable transfer rate, ranging from 6X at the innermost track to 14X at the outermost track. The average data transfer rate is 10X (1500 kbytes/s). Data on a CD-R/CD-ROM is read at a variable transfer rate, ranging from 8X at the innermost track to 20X at the outermost track. The average data transfer rate is 14X (2100 kbytes/s). Data on a CD-RW/CD-R is written at a constant transfer rate of 2X or 4X, depending on the speed and media type you select.

CD-ROM disc read: 20X (maximum performance). CD-R disc read: 20X (maximum performance). CD-R disc write: 4X (maximum performance). CD-RW disc read: 14X (maximum performance). CD-RW disc write: 4X (maximum performance).

VAIO Slimtop™ Reference Manual

Buttons and Switches

Power on/off Floppy disk eject

Manual eject hole

FD DISC HD

CD-RW disc eject

Button or switch Description

Power/Standby switch Turns system power on and off. Floppy disk eject button Ejects a diskette. CD-RW disc eject button

Automatically opens the CD-RW tray.

Emergency eject hole Ejects an optical disc.

SHA0003.VSD

Indicators

Power on/off

Identifying Components

Diskette drive access indicator

CD-RW drive access indicator

Hard drive access indicator

FD DISC HD

SHA0004.VSD

Indicator Description

Power/Standby indicator Standby (amber) indicates the computer is in

standby mode. On (green) indicates the computer is out of standby mode, ready to use. Off (no color) indicates the computer is

turned off. Diskette drive access indicator On (green) indicates diskette drive activity. CD-RW drive access indicator On (amber) indicates optical disc activity. Hard disk drive access

On (green) indicates hard disk drive activity. indicator

VAIO Slimtop™ Reference Manual

Connectors

FD DISC HD

MIC

PHONES

VOLUME

USBi.LINK

SHA0005.VSD

Connector Description

MIC Connects to microphone. PHONES Connects to headphones.

i.LINK (IEEE-1394)

Connects to digital devices that have a 4-pin i.LINK

connector. USB Connects to USB devices. VOLUME Controls headphone volume.

* To connect to a 6-pin i.LINK device, use the i.LINK connector on the back of the system. A 6-pin i.LINK

connector can supply power from the computer to the device if the device also has a 6-pin i.LINK connector. A 4-pin i.LINK connector cannot supply power to the device.

Slots

Identifying Components

FD DISC HD

PC Card

Slot

Memory Stick

Media Slot

SHA0006.VSD

Slot Description

PC Card Slot Accommodates one Type I or Type II PCMCIA

card.

Memory Stick

Media Slot Accommodates Memory Stick media.

VAIO Slimtop™ Reference Manual

Rear View

Power LINE

PRINTER SERIAL MO NITOR

PRINTER SERIAL MONITOR

ETHERNET

USB LINE I.LINK

USB

OUTIN

LINE PHONE

S400

i.LINK LINE OUT

LINE IN

LCD KEYBOARD

LCD

KEYBOARD

PHONE

SHA0007.VSD

Connector Description

Power AC input power. ETHERNET Connects to RJ-45 Ethernet connector. LINE Connects to phone cable from wall jack. PHONE Connects to telephone. PRINTER Connects to parallel device. SERIAL Connects to serial device. MONITOR Connects to VGA monitor (optional). USB Connects to USB devices. LINE IN Connects to output connector on audio device. LINE OUT Connects to input connector on audio device. i.LINK (IEEE-1394)

Connects to digital device that has a 6-pin i.LINK connector.

LCD Connects to VAIO Slimtop

™

LCD monitor.

KEYBOARD Connects to keyboard.

* To connect to a 6-pin i.LINK device, use the i.LINK connector on the back of the system. A 6-pin i.LINK

connector can supply power from the computer to the device if the device also has a 6-pin i.LINK connector. A 4-pin i.LINK connector cannot supply power to the device.

Identifying Components

I/O Connectors

The following section identifies the various I/O connectors.

PRINTER Port

The PRINTER port is a standard 25-pin DB-25 female connector assigned as LPT1.

13 1

25 14

KY0005.VSD

SERIAL Port

The SERIAL port is a standard 9-pin DB-9 male connector assigned as COM1.

KY0057.VSD

MONITOR

The MONITOR connector is a standard 15-pin female high-density VGAtype connector.

SHA0009.VSD

VAIO Slimtop™ Reference Manual

USB Connectors

A USB connector is located on the front and real panels.

Rear panel

Front panel

KY0003.VSD

PHONE, MIC, LINE IN, and LINE OUT

The PHONES, MIC, LINE IN, and LINE OUT jacks are physically identical, but have different connections. They are standard 3.5 mm stereo mini-jacks. The PHONES and MIC jacks are located on the front panel. The LINE IN and LINE OUT jacks are located on the rear panel.

PHONES MIC

Front panel

LINE IN LINE OUT

Rear panel

Connector Description

PHONES 1.0 Vrms output (typical) at 31 mW (32 ohm) output (max). MIC Electret condenser microphone input. LINE IN 1.0 Vrms input (max), 50 Kohm impedance. LINE OUT 1.0 Vrms out (max).

KY0013.VSD

Identifying Components

i.LINK (IEEE-1394)

The 6-pin i.LINK (IEEE-1394) connector on the rear panel can supply power from the computer to a device if the device also has a 6-pin i.LINK connector. The connector supplies 10V to 12V. The total power supplied by the 6-pin i.LINK connector cannot exceed 6 watts.

6-pin i.LINK (IEEE-1394)

4-pin i.LINK (IEEE-1394)

On rear panel

On front panel

KY0087.VSD

Ethernet

The Ethernet connector on the rear panel connects to a 10Base-T/100Base-TX Fast Ethernet network via an RJ-45 connector.

MAN009.VSD

LCD

The LCD connector is a 40-pin female MDR-type connector.

KY0004.VSD

Do not connect any LCD monitor other than the Sony VAIO Slimtop LCD monitor.

KEYBOARD/MOUSE

The KEYBOARD/MOUSE connector is a mini DIN-type female connector that can be used for the supplied VAIO Smart convertible keyboard with wheel mouse, and a standard PS/2 keyboard.

2 5

KY0002.VS

VAIO Slimtop™ Reference Manual

LINE and PHONE

The LINE and PHONE jacks are physically identical and have identical connections. They are standard RJ-11 female phone jacks. However, the LINE jack is for connecting to a telephone line that comes from the wall jack, and the PHONE jack is for connecting the computer to a telephone.

LINE PHONE

KY0014.VSD

Accidentally plugging a phone line from the wall into the modem’s PHONE jack, and a

✍

telephone into the LINE jack, will not damage the modem card or telephone equipment. However, the modem will not work correctly.

Chapter 2 Configuring Your System

This chapter contains information on configuring your system. Configuring your system can consist of the following:

Making changes to the CMOS settings

❑

Making changes to the display's power management settings

❑

Changing the system board jumper position

❑

VAIO Slimtop™ Reference Manual

Accessing the CMOS Setup Utility

You must access the CMOS Setup Utility to make changes to the CMOS settings (see “CMOS Setup Options” on page 75 for information on CMOS settings).

Before rebooting the system, save any open files and exit Windows®.

Reboot the system. The following message appears during the initial

boot sequence:

Press TAB to show the POST screen, DEL to enter SETUP

Press DEL after the progress bar starts.

Use the arrow keys to select an item from the main menu.

Press Enter to display the options for the selected item.

Use the arrow keys to select an option.

Press Page Up or Page Down to modify the setting.

Press ESC to return to the main menu.

Select SAVE & EXIT SETUP, type Y, then press Enter. Follow the

onscreen prompts.

Configuring Your System

Changing the Display's Power Management Settings

A display that has power management capability is designed to operate on reduced power or shut itself off after the system has been idle for a specified period of time.

From the

Click the Power Management icon.

The Power Management Properties dialog box opens, with the Power Schemes tab displayed.

Start

menu, point to Settings, then click Control Panel.

Select the power scheme that is most appropriate for the way you use

your computer. To change a power scheme, change the settings for System standby,

Turn o ff moni to r, an d Tu rn off h ar d d is ks . The System standby option allows you to specify the period of

inactivity (in minutes) that you want to elapse before your computer goes on standby when your computer is running on AC power. Power is reactivated when you move the mouse or press a key.

VAIO Slimtop™ Reference Manual

The Turn off monitor option allows you to specify the period of inactivity (in minutes) that you want to elapse before your monitor turns off when your computer is running on AC power. The display reactivates when you move the mouse or press a key.

The Turn off hard disks option allows you to specify the period of inactivity (in minutes) that you want to elapse before your hard disks turn off when your computer is running on AC power.

To save a new power scheme, first modify the settings, click

type a descriptive name, and then click Click the Advanced tab.

Select the desired settings, and then click OK.

Save As

+ 90 hidden pages