Sony PCG-Z1V, PCG-Z1VE, PCG-Z1VT, PCG-Z1VAP1, PCG-Z1VAP2 Service Manual

...

Information in this document is subject to change without notice.

Sony, VAIO and CLIE are trademarks or registered trademarks of Sony. Microsoft, Windows, Windows Media, Outlook, Bookshelf and other Microsoft products are trademarks or registered trademarks of Microsoft Corporation in the United State and other countries. The word Bluetooth and the Bluetooth logo are trademarks of

Bluetooth SIG, Inc. AMD, the AMD logo, other AMD product names and combinations thereof are trademarks of Advanced Micro Devices, Inc. Intel Inside logo, Pentium and Celeron are trademarks or registered trademarks of Intel Corparation. Transmeta, the Transmeta logo, Crusoe Processor, the Crusoe logo and combinations thereof are trademarks of Transmeta Corporation in the USA and other countries. Graffiti, Hotsync, PalmModem, and Palm OS are registered trademarks, and the Hotsync logo and Palm are trademarks of Palm, Inc. or its subsidiaries. (M) and Motrola are trademarks of Motrola, Inc. Other Motrola pruducts and services with (R) mark like Dragomball are the trademarks of Motrola, Inc.

All other name of systems, products and services in this manual are trademarks or registered trademarks of their respective owners. In this manual, the (TM) or (R) mark are not specified.

Caution Markings for Lithium/Ion Battery - The following or similar texts shall be provided on battery pack of equipment or in both the operating and the service instructions.

CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Discard used batteries according to the manufacturer’s instructions.

CAUTION: The battery pack used in this device may present a fire or chemical burn hazard if mistreated. Do not disassemble, heat above 100°C (212°F) or incinerate. Dispose of used battery promptly. Keep away from children.

CAUTION: Changing the back up battery.

• Overcharging, short circuiting, reverse charging, multilation or incineration of the cells must be avoided to prevent one or more of the following occurrence; release of toxic materials, release of hydrogen and/or oxygen gas, rise in surface temperature.

• If a cell has leaked or vented, it should be replaced immediately while avoiding to touch it without any protection.

Service and Inspection Precautions

1. Obey precautionary markings and instructions

Labels and stamps on the cabinet, chassis, and components identify areas requiring special

precautions. Be sure to observe these precautions, as

well as all precautions listed in the operating manual and other associated documents.

2. Use designated parts only

The set’s components possess important safety characteristics, such as noncombustibility and the

ability to tolerate large voltages. Be sure that

replacement parts possess the same safety characteristics as the originals. Also remember that the ! mark, which appears in circuit diagrams and

parts lists, denotes components that have particularly important safety functions; be extra sure to use only

the designated components.

3. Always follow the original design when mounting parts and routing wires

The original layout includes various safety features,

such as inclusion of insulating materials (tubes and

tape) and the mounting of parts above the printer board. In addition, internal wiring has been routed and

clamped so as to keep it away from hot or high-voltage

parts. When mounting parts or routing wires, therefore, be sure to duplicate the original layout.

4. Inspect after completing service

After servicing, inspect to make sure that all screws, components, and wiring have been returned to their

original condition. Also check the area around the repair

location to ensure that repair work has caused no damage, and confirm safety.

5. When replacing chip components...

Never reuse components. Also remember that the negative side of tantalum capacitors is easily damaged

by heat.

6. When handling flexible print boards...

• The temperature of the soldering-iron tip should be

about 270°C.

• Do not apply the tip more than three times to the same

pattern.

• Handle patterns with care; never apply force.

Caution: Remember that hard disk drives are easily damaged by vibration. Always handle with care.

ATTETION AU COMPOSANT AYANT

LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY DONT LES NUMÉROS SONT DONNÉSDANS CE MANUEL OU DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.

RAPPORT

À LA SÉCURITÉ!

! SUR LES DIAGRAMMES

– 2 –

Confidential

PCG-Z1V/Z1VE/Z1VT (J)

PCG-Z1VAP1/Z1VAP2/Z1VA/Z1VFP (AM)

PCG-Z1VCP/Z1VGP/Z1VJP/Z1VLP/Z1VTP (AO)

Section Title Page

CHAPTER 1. SPECIFICATIONS....................................................... 1-1

(to 1-1)

CHAPTER 2. BLOCK DIAGRAM...................................................... 2-1

(to 2-1)

CHAPTER 3. FRAME HARNESS DIAGRAM .............................. 3-1

(to 3-1)

CHAPTER 4. EXPLODED VIEWS AND PARTS LIST

Palmrest

P-1 ................................................................................................................. 4-2

Bottom

B-1 ................................................................................................................. 4-3

Main Board

M-1 ................................................................................................................ 4-4

LCD

L-1 ................................................................................................................. 4-5

Accessories

A-1 ................................................................................................................. 4-6

DIP Switch .............................................................................................. 4-7

(to 4-7)

CHAPTER 5. OTHERS

5-1. The Barcode Label ..................................................................................... 5-1

5-2. CTO Information ........................................................................................ 5-2

(to 5-2)

[MA]

History of the changes is shown as the Revision History at the end of this data.

– 3 –

Confidential

PCG-Z1V/Z1VE/Z1VT (J)

PCG-Z1VAP1/Z1VAP2/Z1VA/Z1VFP (AM)

PCG-Z1VCP/Z1VGP/Z1VJP/Z1VLP/Z1VTP (AO)

CHAPTER 1.

SPECIFICATIONS

JAM

PCG-Z1VT/P PCG-Z1V/P PCG-Z1VE PCG-Z1VAP1∗ PCG-Z1VAP2∗ PCG-Z1VA∗ PCG-Z1VFP

CPU Pentium-M 1.7 GHz Pentium-M 1.6 GHz Pentium-M 1.3 GHz Pentium-M 1.6 GHz Pentium-M 1.7 GHz Pentium-M 1.6 GHz Pentium-M 1.6 GHz

LCD 14.1SXGA+ 14.1SXGA+ 14.1SXGA+ 14.1SXGA+ 14.1SXGA+ 14.1SXGA+ 14.1SXGA+

HDD 80GB 60GB 40GB 60GB 80GB 60GB 60GB

MEMORY (STANDARD/MAX) 512 MB/1GB 512 MB/1GB 256 MB/768MB 512 MB/1GB 1GB/1GB 512 MB/1GB 512 MB/1GB

On Board 512MB 512MB 256MB 512MB 512MB 512MB 512MB

SLOT – – – – 512MB – –

OPT-DRIVE COMBO COMBO COMBO COMBO COMBO COMBO COMBO

Wireless LAN aa a aaaa

Bluetooth aa a aaa ✕

AC Adaptor PCGA-AC16V6 PCGA-AC16V6 PCGA-AC16V6 PCGA-AC16V6 PCGA-AC16V6 PCGA-AC16V6 PCGA-AC16V6

Battery PCGA-BP2V PCGA-BP2V PCGA-BP2V PCGA-BP2V PCGA-BP4V PCGA-BP2V PCGA-BP2V

OS XP Professional XP Professional XP Home Edition XP Professional XP Professional XP Home Edition XP Professional

[MA]

PCG-Z1VGP PCG-Z1VLP PCG-Z1VCP PCG-Z1VTP PCG-Z1VJP

CPU Pentium-M 1.6 GHz Pentium-M 1.6 GHz Pentium-M 1.6 GHz Pentium-M 1.6 GHz Pentium-M 1.6 GHz

LCD 14.1SXGA+ 14.1SXGA+ 14.1SXGA+ 14.1SXGA+ 14.1SXGA+

HDD 60GB 60GB 60GB 60GB 60GB

MEMORY (STANDARD/MAX) 512 MB/1GB 512 MB/1GB 512 MB/1GB 512 MB/1GB 512 MB/1GB

On Board 512MB 512MB 512MB 512MB 512MB

SLOT – – –––

OPT-DRIVE COMBO COMBO COMBO COMBO COMBO

Wireless LAN aa aaa

Bluetooth ✕✕ ✕✕✕

AC Adaptor PCGA-AC16V6 PCGA-AC16V6 PCGA-AC16V6 PCGA-AC16V6 PCGA-AC16V6

Battery PCGA-BP2V PCGA-BP2V PCGA-BP2V PCGA-BP2V PCGA-BP2V

OS XP Professional XP Professional XP Professional XP Professional XP Professional

[MA]

• The trademarks or registered trademarks of above table, refer to page 2.

• The model that is accompanied by astarisk (∗) is CTO model.

•

本表中の商標・登録商標については、２ページをご参照下さい。

•

機種名に(∗ )がつくのは、CTOモデルです。

1–1

(END)

Confidential

PCG-Z1V/Z1VE/Z1VT (J)

PCG-Z1VAP1/Z1VAP2/Z1VA/Z1VFP (AM)

PCG-Z1VCP/Z1VGP/Z1VJP/Z1VLP/Z1VTP (AO)

CHAPTER 2.

BLOCK DIAGRAM

USB Left

CONN

USB Left

CONN

RJ4 5

For SPD

EEP ROM

On DIMM 1

EEP ROM

For VID

Pentium-M

Processor

1MB L2

479pins

uFCBGA

USB1

USB3

Memory

Stick

Module

For SPD

EEP ROM

On DI MM2

EEP ROM

RJ-4 5

EEP ROM

For Passwor d

Port-0

Port-1

Port-2

Port-3

Port-4

SMBUS2

For ClockGEN

CP U Local Bus

Bluetooth

Port-5

Internal

HDD

Module

Port0-5

IDE(A TA100)

Primary

Opt ical

dr ive

Memory

CONT ROL LER

HUB (MCH )

732 FCBGA

IO Control Hub

ICH4-m

421mBGA

Seconda ry

266MHz Memory Bus

(DDR)

On Board Memory 256MB

or 512MB SDRAM SO-DIMM

EEP ROM

Ether

PHY

For LAN

RJ-4 5

LPC

SMBUS2

Gr aphics

M6-C16

(ATI )

CARDBU S

& i.LINK

RICOH R5C5 51

CL KGEN

ICS

950812YGD

Refer to Clock Gene rator

Block Dia gra m

PCI BUS(3.3V)

CardBus/16bitCa rd

For i.LI NK

EEP ROM

i.LINK0

SMBUS2

CD CONN

PC Card

Conne ctor

1 Slot

LCD

SXGA+(14)

SONY

Cable

Dock-VGA DB-15

Dock -DVI

i.LINK0

VGA DSUB-15

i.LINK

Port Repr icator

Dock-DVI

DVI

RJ11

DC Ja ck

DCin

RJ-1 1

Power

Circuit

Batter y

BATTERY 1

MDC

(Mode m

Daughter

Card)

Module

RJ-1 1

AC LINK

Audi o

YMF753

(Yama ha)

AMP, etc.

PHONE

OUT

FW H

(Fla sh BIOS

ROM )

MIC

Speaker

L&R

Internal KeyBoar d

Membr ane

2–1

(END)

SMBUS1

H8S/2160

KBC/EC

SPIC

LID

& SM BUS MUX

TouchP ad

SMBUS 0

FA N0 ATF0

I/O Expa nde r

BATTERY 1

SONY CO NFI DENTIAL

Ot her

Cont r ol

Dock-VGA DB-15

RJ-4 5

USB3

USB1

USB=>P RT

PL-2305

USB HUB

UPD720110

DCin

PCG-Z1VCP/Z1VGP/Z1VJP/Z1VLP/Z1VTP (AO)

VGA

DB-15

RJ4 5

PRT

DB-25

USB

CONN

USB

CONN

USB

CONN

DC J ack

1/1

Confidential

PCG-Z1V/Z1VE/Z1VT (J)

PCG-Z1VAP1/Z1VAP2/Z1VA/Z1VFP (AM)

MAGIC

GATE

MEMORY

STICK

USB

i LINK

MIC

HEAD

PHONE

Side L

MEMORY STICK

CONNECTOR

110

CN4601

CNX-199 BOARD SIDE A

LCD HARNESS

IFX-286 BOARD SIDE A

1414

CN5301

CN5402CN5401

110

CN4602

CN5300

CN5400

CN2270

WIRELESS

LAN ANT

(L)

NETWORK MONITOR

RJ-45 HARNESS

110

IFX-249 BOARD SIDE B

CN1501

CN1394

J2150

J2250

6 1

CN2702

CN721

INVERTER UNIT

CN5501

10 5

CN5500

FFC IFX248

FPC

(VGA)

1012

CN3902

CHAPTER 3.

FRAME HARNESS DIAGRAM

LCD

UNIT

CNX-200 BOARD SIDE B

BATTERY

CN2602

BATTERY PACK

SPEAKER

L ch

CN4051

MBX-71 BOARD SIDE A

WIRELESS

D6003

D6000

D6001

D6002

CN6000

LAN ANT

(R)

SWX-131 BOARD SIDE A

16 2

FFC SWX131

CN2901

115

CN6001

S6002

OFF WIRELESS ON

P1P2

S6003

FPC (MODEM)

1092

CN2001

CN60

S6003

SPEAKER

R ch

MODEM

DC FAN MOTOR

CARD

From board to connector (direct connection) Harness (connector at both end) Harness (soldered at one end)

Connectors soldered on board and appearing on the panel

基板からコネクタへ（ダイレクト接続）

ハーネス（両端がコネクタ付き） ハーネス（一方が半田付け）

コネクタ（基板側半田付け, パネル側コネクタ）

DC IN 16V

Side R

Rear

FPC (LED-W)

POWER

HARNESS (RJ-11)

MODULAR JACK

PORT REPLICATOR

PCGA-PRZ1

HARNESS

CN3901

(WITH DC JACK 2P)

2 100

CN2701

Wireless LAN

Bluetooth

PCG-Z1VT/P, Z1V/P, Z1VE, Z1VA, Z1VAP1, Z1VAP2

[MA]

MBX-71 BOARD SIDE B

CARD

PC CARD

CONNECTOR

CN1401

CABLE ASSY

CN2821

KEYBOARD

UNIT

CN2601

199

200

CARD MEMORY

(EXPANSION MEMORY)

CN801

FFC TP

CN5101

SWX-132 BOARD SIDE B

CN4501

29 1 30

CN4502

TOUCH

PA D

119

CN2801

CN1202

FFC SWX132

FPC (OPT)

124

WIRELESS

CN1601

LAN

CARD

COMBO DRIVE

1163123

CN5600

HDD

CN5601

IFX-250 BOARD

150

FPC (HDD)

CN1202

BLUETOOTH

ANT

SIDE B

CN5100

CN5102

S5101S5100

FFC IFX250

J5J6

PCG-Z1VT/P, Z1V/P, Z1VE, Z1VA, Z1VAP1, Z1VAP2

[MA]

BLUETOOTH MODULE

CABLE (WITH U.F.L CONNECTOR)

IFX-251 BOARD SIDE A

Confidential

PCG-Z1V/Z1VE/Z1VT (J)

PCG-Z1VAP1/Z1VAP2/Z1VA/Z1VFP (AM)

3–1

PCG-Z1VCP/Z1VGP/Z1VJP/Z1VLP/Z1VTP (AO)

(END)

+ 11 hidden pages

Sony PCG-Z1V, PCG-Z1VE, PCG-Z1VT, PCG-Z1VAP1, PCG-Z1VAP2 Service Manual

TABLE OF CONTENTS