Sony PCG-TR2, PCG-TR2E, PCG-TR2A, PCG-TR2AP1, PCG-TR2AP3 Service Manual
...
SERVICE MANUAL
Ver. 4 2003K
Revision History
Area Model Lineup
PCG-TR2/B
American
Asian/Oceania/
South Africa
Japanese Japanese
US Canadian
Latin PCG-TR2F
International PCG-TR2
Chinese PCG-TR2C
Korean PCG-TR2L
Thai PCG-TR2S
Taiwan PCG-TR2T
PCG-TR2/P∗
PCG-TR2E
PCG-TR2A
PCG-TR2AP1∗
PCG-TR2AP3∗
Confidential
∗ : CTO model
PCG-TR2/TR2E
PCG-TR2A/TR2AP1/TR2AP3/TR2F
PCG-TR2/TR2C/TR2L/TR2S/TR2T
S400
9-876-341-04
• Design and specifications are subject to
change without notice.
本機の仕様および外観は、改良のため予告なく変更
•
することがあります が 、ご了承ください。
NOTEBOOK COMPUTER
Information in this document is subject to
change without notice.
Sony, VAIO and CLIE are trademarks or registered trademarks of Sony. Microsoft,Windows,
Windows Media, Outlook, Bookshelf and other
Microsoft products are trademarks or registered
trademarks of Microsoft Corporation in the
United States and other countries.The word
Bluetooth and the Bluetooth logo are trademarks
of Bluetooth SIG, Inc. AMD, AMD logo, AMD
Duron and combinations there of, 3DNow!, are
trademarks of Adv anced Micro Devices, Inc. Intel
Inside logo, Pentium and Celeron are trademarks
or registered trademarks of Intel Corporation.
Transmeta, the Transmeta logo, Crusoe Processor, the Crusoe logo and combinations there of
are trademarks of Transmeta Corporation in the
USA and other countries. Graffiti, HotSync,
PalmModem, and Palm OS are resistered trademarks, and the Hotsync logo and Palm are trademarks of Palm,Inc. or its subsidiaries. (M) and
Motrola are trademarks of Motrora, Inc. Other
Motrola products and services with (R) mark like
Dragomball are the trademarks of Motrola, Inc.
All other names of systems, products and
servicesin this manual are trademarks or registered trademarks of their respective owners. In
this manual, the (TM) or (R) mark are not specified.
Caution Markings for Lithium/Ion Battery - The
following or similar texts shall be provided on
battery pack of equipment or in both the operating and the service instructions.
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same
or equivalent type recommended by the manufacturer. Discard used batteries according to the
manufacturer’s instructions.
CAUTION: The battery pack used in this device
may present a fire or chemical burn hazard if
mistreated. Do not disassemble, heat above
100ºC (212ºF) or incinerate. Dispose of used battery promptly. Keep away from children.
CAUTION: Changing the back up battery.
•Overcharging, short circuiting, reverse charging, multilati on or incineration of the cells must
be avoided to prevent one or more of the following occurrences; release of toxic materials,
release of hydrogen and/or oxygen gas, rise in
surface temperature.
• If a cell has leaked or vented, it should be replaced immediately while avoiding to touch it
without any protection.
Service and Inspection Precautions
1. Obey precautionary markings and
instructions
Labels and stamps on the cabinet, chassis, and
components identify are as requiring special precautions. Be sure to observe these precautions,
as well as all precautions listed in the operating
manual and other associated documents.
2. Use designated parts only
The set’s components possess important safety
characteristics, such as noncombustibility and the
ability to tolerate large voltages. Be sure that replacement parts possess the same safety characteristics as the originals. Also remember that the
0 mark, which appears in circuit diagrams and
parts lists, denotes components that have particularly important safety functions; be extra sure to
use only the designated components.
3. Always follow the original
designwhen mounting parts and
routing wires
The original layout includes various safety features, such as inclusion of insulating materials
(tubes and tape) and the mounting of parts above
the printer board. In addition, internal wiring has
been routed and clamped so as to keep it away
from hot or high-voltage parts. When mounting
parts or routing wires, therefore, be sure
toduplicate the original layout.
4. Inspect after completing service
After servicing, inspect to make sure that all
screws, components, and wiring have been returned to their original condition. Also check the
area around the repair location to ensure that repair work has caused no damage, and confirm
safety.
5. When replacing chip components...
Never reuse components. Also remember that
the negative side of tantalum capacitors is easily
damaged by heat.
6. When handling flexible print
boards...
• The temperature of the soldering-iron tip
should be about 270ºC.
• Do not apply the tip more than three times to
the same pattern.
•Handle patterns with care; never apply force.
Caution: Remember that hard disk drives
areeasily damaged by vibration. Always
handlewith care.
ATTENTION AU COMPOSANT AYANT
RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFÉS PAR UNE
MARQUE 0 SUR LES DIAGRAMMES
SCHÉMATIQUES ET LA LISTE DES PIÈCES
SONT CRITIQUES POUR LA SÉCURITÉ DE
FONCTIONNEMENT. NE REMPLACER CES
COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS
DANSCE MANUEL OU DANS LES
SUPPÉMENTS PUBLIÉS PAR SONY.
– 2 –
Confidential
PCG-TR2/TR2E (J)
PCG-TR2A/TR2AP1/TR2AP3/TR2F (AM)
PCG-TR2/TR2C/TR2L/TR2S/TR2T (AO)
TABLE OF CONTENTS
Section Title Page
CHAPTER 1. SPECIFICATIONS ....................................................................................... 1-1
(to 1-1)
CHAPTER 2. BLOCK DIAGRAM...................................................................................... 2-1
(to 2-1)
CHAPTER 3. FRAME HARNESS DIAGRAM............................................................... 3-1
(to 3-1)
CHAPTER 4. EXPLODED VIEWS AND PARTS LIST
Palmrest
P-1 ........................................................................................................................................... 4-2
Bottom
B-1 .......................................................................................................................................... 4-3
Main Board
M-1 ......................................................................................................................................... 4-4
HDD
H-1 .......................................................................................................................................... 4-5
LCD
L-1........................................................................................................................................... 4-6
Accessories
A-1 .......................................................................................................................................... 4-7
(to 4-7)
Section Title Page
CHAPTER 5. OTHERS
5-1. The Barcode Label.................................................................................................................. 5-1
5-2. CTO Information .................................................................................................................... 5-2
(to 5-2)
History of the changes is shown as the “Revision
History” at the end of this data.
変更履歴は，“RevisionHistory”として，本データ末に記
載してあります。
– 3 –
Confidential
PCG-TR2/TR2E (J)
PCG-TR2A/TR2AP1/TR2AP3/TR2F (AM)
PCG-TR2/TR2C/TR2L/TR2S/TR2T (AO)
Confidential
PCG-TR2/TR2E (J)
PCG-TR2A/TR2AP1/TR2AP3/TR2F (AM)
PCG-TR2/TR2C/TR2L/TR2S/TR2T (AO)
CHAPTER 1.
p
p
y
SPECIFICATIONS
[MA]
1
J AM AO
CPU M-Cel 800AMHz ULV P-M 1.0GHz ULV P-M 1.0GHz ULV P-M 1.0GHz ULV P-M 1.0GHz ULV P-M 1.0GHz ULV P-M 1.0GHz ULV P-M 1.0GHz ULV P-M 1.0GHz ULV P-M 1.0GHz ULV P-M 1.0GHz
LCD 10.6WXGA 10.6WXGA 10.6WXGA 10.6WXGA 10.6WXGA 10.6WXGA 10.6WXGA 10.6WXGA 10.6WXGA 10.6WXGA 10.6WXGA
HDD 40GB 40GB 40GB 40GB 40GB 40GB 40GB 40GB 40GB 40GB 40GB
hics Intel 855GM Intel 855GM Intel 855GM Intel 855GM Intel 855GM Intel 855GM Intel 855GM Intel 855GM Intel 855GM Intel 855GM Intel 855GM
Gra
MEMORY1 256MB × 1 256MB × 1 512MB × 1 512MB × 1 512MB × 2 512MB × 1 512MB × 1 512MB × 1 512MB × 1 512MB × 1 512MB × 1
OPT-DRIVE CD-RW/DVD-ROM CD-RW/DVD-ROM CD-RW/DVD-ROM CD-RW/DVD-ROM CD-RW/DVD-ROM CD-RW/DVD-ROM CD-RW/DVD-ROM CD-RW/DVD-ROM CD-RW/DVD-ROM CD-RW/DVD-ROM CD-RW/DVD-ROM
internal W-LAN
AC ada
Batter
OS WinXP Home WinXP Home WinXP Home WinXP Pro WinXP Pro WinXP Home WinXP Home WinXP Home WinXP Home WinXP Home WinXP Home
QUANTITY
[STANDARD/MAX] 256/1024 256/1024 512/1024 512/1024 1024/1024 512/1024 512/1024 512/1024 512/1024 512/1024 512/1024
tor PCGA-AC16V6 PCGA-AC16V6 PCGA-AC16V6 PCGA-AC16V6 PCGA-AC16V6 PCGA-AC16V6 PCGA-AC16V6 PCGA-AC16V6 PCGA-AC16V6 PCGA-AC16V6 PCGA-AC16V6
PCG-TR2E PCG-TR2/B PCG-TR2A PCG-TR2AP1∗ PCG-TR2AP3∗ PCG-TR2F PCG-TR2 PCG-TR2L PCG-TR2C PCG-TR2S PCG-TR2T
aa
aa
PCGA-BP2T PCGA-BP2T PCGA-BP2T PCGA-BP2T PCGA-BP2T PCGA-BP2T PCGA-BP2T PCGA-BP2T PCGA-BP2T PCGA-BP2T PCGA-BP2T
aa
aa
aa
aa
aa
aa
aa
aa
[MA]
2
aa
aa
aa
aa
[MA]
1
aa
aa
aa
aa
[MA]
3
aa
aa
aa
aa
• The trademarks of registered trademarks of above table, refer to page 2.
• The model that is accompanied by asterisk (∗) is the CTO model.
• 本表中の商標・登録商標については，2ページをご参照ください。
• 機種名に（∗）がつくのはCTOモデルです。
1-1
(END)
Confidential
PCG-TR2/TR2E (J)
PCG-TR2A/TR2AP1/TR2AP3/TR2F (AM)
PCG-TR2/TR2C/TR2L/TR2S/TR2T (AO)
o
CHAPTER 2.
BLOCK DIAGRAM
USB0
CN
USB1
CN
MS
CN
RJ11
RJ45
RJ80535UC0011M
RJ80535UC0011M
RJ80535UC800512M
RJ80535UC800512M
IC401
CLKGEN
ICS
950812
Camera
Memory
Memory
Stick
Stick
Module
Module
RJ-11
IC1
IC1
CPU
CPU
or
Camera
Module
or
Primary
Internal
USB2.0
USB2.0
Camera
Module
IC1103
EEPROM
EEPROM
For Rominfo
IDE(ATA100)
HDD
PSB
SMBUS2
Optical
Drive
Secondary
Port-0
Port-1
Port-3
Port-2
Port-4
Port-5
IC1103
Memory Slot
CN801,CN802
IO Control Hub
IO Control Hub
FW82801DBM
EEPROM
EEPROM
For
MAC Address
IC1001
IC1001
FW82801DBM
LCI
IC1501
IC1501
Ether Control
Ether Control
Intel 82562
Intel 82562
266MHz Memory Bus
(DDR)
HUB I/F
LPC
AC LINK
MDC
MDC
(Modem
(Modem
Daughter
Daughter
Card)
Card)
Module
Module
RJ-11
IC1403
EEPROM
EEPROM
i.LINK0
For i.Link
IC201
IC201
GMCH
GMCH
RG82G5300M
RG82G5300M
PCI BUS(3.3V)
IC2100
AD1981B
Line-in
Line-Out
AMP, etc.
IC1394
IC1394
CARDBUS
CARDBUS
i.link
i.link
RICOH
RICOH
R5C551
R5C551
IC2100
Audio
Audio
AD1981B
(ADI)
(ADI)
MIC
Headphone
CardBus/16bitCard
Speaker
CN701
LCD CONN
PC Card
Connector
IC2501
IC2501
FWH
FWH
KeyBoard
Cable
SONY
IC2301
IC2301
H8S/2160B
H8S/2160B
KBC/EC
KBC/EC
SPIC
SPIC
PS/2
TouchPad
MiniPCI
MiniPCI
SMBUS1
SMBUS0
802.11 a/b/g
or
802.11 b/g
r
802.11 b
FAN0 ATF0
i.LINK0
Debug
Debug
CN
Power
CN
VGA
Out
Dsub-15p
i.LINK
IntMic
in
Phone
Out
ExtMicinSpeaker
L&R
2-1
(END)
SPDIF
Battery
Power
Power
Circuit
Circuit
DC Jack
Confidential
PCG-TR2/TR2E (J)
PCG-TR2A/TR2AP1/TR2AP3/TR2F (AM)
PCG-TR2/TR2C/TR2L/TR2S/TR2T (AO)
MONITOR
Side L
INVERTER UNIT
FPC (VGA CONNECTOR)
EXTENSION
MEMORY
MODULE
CAMERA UNIT
LCD HARNESS
CN2701
212
111
CN802
12
(WITH HEATSINK)
KEY BOARD
173172
CHAPTER 3.
FRAME HARNESS DIAGRAM
CAPTURE
S6103
ZOOM
Y
VANADIUM-LITHIUM
S6102
BATTERY
21
SPEAKER
L ch
LCD
M
DC FAN
CN6052
SPEAKER
R ch
CN60
12
21
2423
CN2800
BCX-U7
2181
21
CN6051 CN6050
1
A
LEX-46 BOARD SIDE A
HARNESS (DC JACK WITH 2P)
CN3901
21
CN3902
SWX-135
BOARD
SIDE A
S6100
VOL
S6101
Rear
1
5
CN6100
CN701
DC IN
21
4039
LITHIUM ION
BATTERY PACK
CN4051
18
CN1401
4544
12
4544
CN1402
12
4544
CN801
172173
21
CONNECTOR
(WITH FPC)
From board to connector
(direct connection)
Harness
(with connectors on both ends)
Harness (soldering on either end)
MEMORY
MODULE
PC CARD
Side R
MODULAR
JACK
NETWORK
PC CARD
MODEM
CARD
CN2601
USB
CN1394
i.LINK
DC OUT
MEMORY
STICK
BLUE
TOOTH
MODULE
BLUE
TOOTH
MODEL
1
10
POWER
S6200
CN4601
12
1920
CN5601
12
CN6200
SWX-136 BOARD
SIDE A
HARNESS (SW)
IFX-292 BOARD
SIDE A
CN5902
2
1
14
1
FFC
12
2930
CN5900
CN5901
CN2901
(30PIN)
12
2930
HDD
MBX-81 BOARD
SIDE A
CN1201
FLEXIBLE
PRINT
PWB (HDD)
FLEXIBLE
PRNT
PWB (LED)
2
LEFT BUTTON
TOUCH PAD
4950
1
RIGHT BUTTON
CN2721
145
CN1602 CN1601
244
145
244
FPC-2
WIRELESS
LAN CARD
12
CN1501
1
8
50
CN1202
FLEXIBLE PRINT
PWB (AUDIO)
49
12
FPC-3
DC-10L
COMBO
DRIVE
DC-9R
CN5950
FPC-4
21
4445
CN5951
110
CNX-236
BOARD
RJ-45/11 HARNESS
SIDE A
CN6301
USB
J2150
MIC IN
J2250
HEADPHONE
2
1
ELECTRET CAP
MICROPHONE
CN2190
3-1
(END)
Loading...