Sony Nxcam NEX-FS700 Upgrade Procedure
NEX-FS700 V3.10 Upgrade procedure
NEX-FS700
V3.10
Upgrade procedure for Win and Mac
November 2014
November 2014 abc
NEX-FS700 V3.10 Upgrade procedure
New features
With V3.10 firmware upgrade, the following functions will be available for your NEXFS700 camcorder:
1. Distortion correction of E-mount lenses supported (SELP18105G, SELP1650)
2. Iris ring operation supported (SELP28135G)
3. Direction change on zoom ring rotation (SELP28135G)
4. Operation stability improvement
Please note that if you have upgraded your NEX-FS700E or NEX-FS700EK into V3.00,
or your model is NEX-FS700R or NEX-FS700RH, you will need to install V3.10.
If you haven’t upgraded your NEX-FS700E/NEX-FS700EK into V3.00, then you will
need to install V2.10.
November 2014 abc
NEX-FS700 V3.10 Upgrade procedure
Version check: Confirming if the unit is applicable
Select [MENU] – [OTHERS] - [VERSION DISPLAY] on the camera.
Firmware version is displayed. Check if “BODY” version is “Ver. 3.00” or “Ver. 3.01”:
November 2014 abc
NEX-FS700 V3.10 Upgrade procedure
System requirements (Windows)
Supported: Windows 8.1, Windows 8, Windows 7 SP1, Windows Vista 1 SP2 (Starter
edition is not supported). Windows XP is not supported.
Other system requirements:
• Hard Disk space: 200 MB or more
• RAM: 512 MB or more
Please close all other applications software before updating the system software.
Prevent your computer from sleeping beforehand.
System requirements (Mac)
Supported: Mac OS X v.10.7-10.10
Other system requirements
• CPU: Intel processor (Core Solo and Core Duo processors are no longer
supported)
• Hard Disk space: 200 MB or more
• RAM: 512 MB or more
Please close all other applications software before updating the system software.
Prevent your computer from sleeping beforehand.
Other items required
• Power source for NEX-FS700: AC-PW10 (AC/DC converter, supplied), AC-VL1
(optional) + DK-415 (adapter-to-battery bay connection cable, optional). Update
can only be performed when using AC adapter. Battery only cannot be used for
this update.
• USB cable: supplied with the camcorder; update functionality is not guaranteed
with any other USB cable.
November 2014 abc
NEX-FS700 V3.10 Upgrade procedure
Firmware update procedure for Windows systems
When performing the firmware update, please use the supplied AC adapter. Update
won’t work only with battery use.
IMPORTANT: Do not remove the AC adapter during the update. Otherwise, the
camera may become inoperable due to the sudden power shutdown.
Remove the memory card from the camcorder before starting this procedure.
Step 1: download the update file
Link should have been provided to you, or you may find it on the Support tab of NEXFS700 camcorder website.
Please save the downloaded file onto the Desktop of your computer (recommended).
For Windows 8/8.1 users: Under the initial settings of Internet Explorer, the update file
may be saved in the [Downloads] folder. Click the [Desktop] tile from the Start screen
and find the downloaded file in the [Downloads] folder by using Explorer.
Step 2: startup Firmware Updater
Close all currently running programs on your computer.
Double-click the downloaded file to run Firmware Updater.
November 2014 abc
NEX-FS700 V3.10 Upgrade procedure
Step 3: connect the camcorder to the computer
Feed the camera with AC adapter, and never power it off until you have finished the
upgrade.
Connect the camera to the computer with the supplied USB cable.
Press on the media icon on the camcorder screen.
After confirming “Mass Storage Connected” is displayed on the camera screen, click
[Next] on Firmware Updater.
If the USB CONNECT screen is not shown, please try the following methods:
1. Disconnect the USB cable from the camera, and then reconnect the USB cable.
2. If there is another unused USB terminal in the computer, reconnect the USB
terminal to that terminal
Step 4: check if update is required
Click [Next] to check your actual version.
November 2014 abc
Loading...