Sony MRW62E-S1 Operating manual

3-218-810-22 (1)

Multi-Card Reader/Writer

Operating Instructions

Before operating the unit, please read this document

thoroughly, and retain it for future reference.

MRW62E-S1

Safety regulations

WARNING

Keep the unit away from children. If any part of the unit is swallowed, promptly see a doctor. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.

Notice for the customer in the countries applying EU Directives

The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents.

NOTICE TO USERS

Documentation ©2006 Sony Corporation. All rights reserved. This manual described herein, in whole or in part, may not be reproduced, translated to any machinereadable form without prior written approval from Sony Corporation.

IN NO EVENT SHALL SONY CORPORATION BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES, WHETHER BASED ON TORT, CONTRACT, OR OTHERWISE, ARISING OUT OF OR IN CONNECTION WITH THIS MANUAL, THE DEVICE DRIVERS OR OTHER INFORMATION CONTAINED HEREIN OR THE USE THEREOF.

Sony Corporation reserves the right to make any modification to this manual or the information contained herein at any time without notice. SONY CORPORATION IS NOT RESPONSIBLE FOR ANY DAMAGE TO OR LOSS OF ANY PROGRAMS, DATA, OR OTHER INFORMATION STORED ON ANY MEDIA.

Copyright law prohibits unauthorized use of any recorded audio/video for any other purpose than personal enjoyment. Please be warned that the “Memory Stick” containing images and data protected by copyright shall be strictly used within copyright law.

Trademarks

• , “Memory Stick,” “Memory Stick Duo,” “MagicGate Memory Stick,” “Memory Stick PRO,” “Memory Stick PRO Duo,” “Memory Stick PRO-HG Duo,” “Memory Stick Micro,” and “M2” are registered trademarks or trademarks of Sony.

• Microsoft logo are trademarks or registered trademarks of Microsoft Corporation in the United States of America and/or other countries.

• Macintosh trademarks of Apple Inc. in the United States of America and/or other countries.

• Other system names, product names, and company names appearing in this manual are trademarks or registered trademarks of their respective holders, even though not indicated by the ® or ™ marks.

, Windows®, and the Windows

and Mac OS® are registered

Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems)

This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection

point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic office, your household waste disposal service or the shop where you purchased the product.

Before you use the reader/writer for the first time, you are encouraged to install the Drive Letter Recognition Software on your computer.

Before connecting the reader/writer, see page 14 for details about the Drive Letter Recognition Software installation procedure. Also see the end user license agreement on page 20.

Safety regulations .............................. 2

Overview ........................................... 4

Package Contents ............................... 4

System Requirements ........................ 4

Supported Media ............................... 5

Parts and Functions ............................ 6

Connecting the Reader/Writer to a

Computer ........................................... 7

Using the Reader/Writer .................... 9

Inserting a Memory Card ............... 9

Reading and Writing Data on a

Memory Card ............................... 10

Removing a Memory Card ........... 11

Reading the Access Indicator ....... 12

Disconnecting the Reader/Writer

From the Computer .......................... 13

Installing the Drive Letter Recognition

Software (Windows Only) ............... 14

About Memory Stick ....................... 15

Usage Notes ..................................... 16

Troubleshooting ............................... 18

Specifications .................................. 19

Technical Support ............................ 19

End User License Agreement .......... 20

Overview

System

The MRW62E-S1 (hereafter referred to as the “reader/writer”) has the following features:

• Quick and simple data transfer – easily

transfer images from camera to PC

• Compatible with “Memory Stick,”

“Memory Stick PRO,” “Memory Stick Duo,” CompactFlash, Microdrive, xD-Picture Card, SmartMedia, MultiMediaCard, SD Memory Card

• Drive Letter Recognition Software can be

download from the web site

• Quick to Connect – Hot-pluggable

USB-powered design

Package Contents

When you unpack the box, make sure that it contains all the accessories listed below. If anything is missing or damaged, contact your retailer.

• MRW62E-S1 Multi-Card Reader/Writer

Requirements

The reader/writer requires the following minimum system configuration:

• OS – Windows Vista – Windows® XP Home or Professional – Windows

Pack 4 or later)

– Windows – Mac OS X 10.1.2 or later

This product works with the standard drivers in Windows.

2000 Professional (Service

• USB cable

• Read Me First

Supported Media

The reader/writer supports the following media:

“Memory Stick” media

• “Memory Stick” (without MagicGate)

• “MagicGate Memory Stick”

*1*2

• “Memory Stick” (with MagicGate)

• “Memory Stick Duo” (without MagicGate)

• “MagicGate Memory Stick Duo”

• “Memory Stick Duo” (with MagicGate)

*1*2*3

• “Memory Stick PRO”

• “Memory Stick PRO Duo”

*2*3

• “Memory Stick PRO-HG Duo”

• “Memory Stick Micro” (“M2”)

“MagicGate” is the general name of a copyright protection technology developed by Sony.

Recording or playback of MagicGate data that uses MagicGate technology is not supported.

4-bit parallel data transfer is supported. It, however, varies depending on each medium how long it takes to read/write data.

“M2” is an abbreviation of “Memory Stick Micro.” In this document, hereinafter, the abbreviation “M2,” is used.

With adaptor (not supplied) only.

SD memory cards

• SD Memory Card

• SDHCTM Memory Card

• miniSDTM card

• miniSDHCTM card

• microSDTM card

• microSDHCTM card

Recording or playback of data that uses SD technology is not supported.

With adaptor (not supplied) only.

*6*7

*1*2*3

*1*2

*2*3

*2*3*4*5

Other memory cards

• MultiMediaCard

• RS-MMC

• CompactFlash

• Microdrive®

• SmartMedia

• xD-Picture Card

MMCplus and MMCmobile are supported, but parallel data transfer is not supported.

The Microdrive requires more power than other memory cards. When using a Microdrive, remove other memory cards; otherwise an error may occur due to a shortage of power.

Notes

• Not all memory cards are guaranteed to work.

Operation is not assured if non-supported memory cards are used.

• The capacity of a file to be recorded/played back

is smaller than 4 GB per file according to the specifications of the file system incorporated in “Memory Stick.”

• Although operation check of this product has

been performed with up to 8 GB “Memory Stick,” please note that the operation is not guaranteed for every type of “Memory Stick.”

• In this manual, all types of media listed in

“Supported Media” are generically called memory cards.

• I/O cards that are not memory cards, such as

GPS cards, are not supported.

• MultiMediaCards and SD Memor y Cards use the

same slot, so you cannot use them at the same time.

• The “Memory Stick” media all use the same slot,

so you cannot use them at the same time.

• Only DOS format is supported. Memory cards in

other formats are not supported.

Parts and Functions

Front

Access Indicator

This indicator is always lit. The indicator blinks when the reader/writer accesses data on a memory card.

B SmartMedia/xD-Picture Card Slot

Insert either a SmartMedia memory card or xD-Picture Card here.

C CompactFlash/Microdrive Slot

Insert either a CompactFlash or Microdrive memory card here. Remove all other memory cards before using a Microdrive, because of its large power consumption.

D “Memory Stick” Slot

Insert a “Memory Stick” media here. When inserting a “Memory Stick Micro” (“M2”), use an adaptor (not supplied).

E MultiMediaCard/SD Memory Card

Slot

Insert either a MultiMediaCard or an SD Memory Card here. When inserting a miniSD Card, miniSDHC Card, microSD Card or a microSDHC Card, use an adaptor (not supplied).

Rear

USB Port (mini B)

Connect to a computer using the supplied USB cable.

Connecting the Reader/Writer to a Computer

Simply connect the reader/writer to a computer using the supplied USB cable.

1 Start the computer.

2 Connect the smaller connector

of the USB cable to the USB port on the rear of the reader/writer.

3 Connect the larger connector of

the USB cable to the USB port on the computer.

Notes for Windows

• On some computers, a message may appear

asking you to insert the operating system disc. When this happens, follow the computer’s instructions.

• On some computers, the “HI-SPEED USB

Device Plugged into non-HI-SPEED USB Hub” message may appear, indicating that a hi-speed USB device has been connected to a USB port which does not support hispeed USB. If your computer has multiple USB ports, try connecting to a different port. Otherwise, close the message and continue using the reader/writer with the current port.

The computer recognizes the reader/ writer as a removable disk, and the reader/writer is ready for use.

Notes

• Do not connect to a computer via a USB hub.

• Depending on the computer and the status of its

operating system, the reader/writer may not operate or may become unstable. If this occurs, refer to the “Troubleshooting” section.

• After disconnecting the USB cable, wait at least

5 seconds before reconnecting it. (Otherwise, the reader/writer may not be recognized.)

• When t wo or more USB devices are c onnected to

one computer, the read er/writer is not guaranteed to operate simultaneously with some types of USB device.

• You cannot access two or more memory cards

simultaneously on a single computer by connecting additional memory card devices. Remove any memory cards from the reader/ writer or turn off the other devices.

+ 14 hidden pages