Sony MDRDS-8000 Service manual

MDR-DS8000

SERVICE MANUAL

Ver 1.0 2002. 02

DP-IF8000 MDR-IF8000

• Manufactured under license from Dolby Laboratories and Digital Theater Systems, Inc. “Dolby”, “AC-3”, “Pro Logic”, the “AAC” logo and the double-D symbol ; are trademarks of Dolby Laboratories. “DTS ” and “DTS VIRTUAL” are trademarks of Digital Theater Systems, Inc.

US Model

Canadian Model

AEP Model

• MDR-DS8000 is composed of the following models. As for the service manual it is issued for each component model, then, please refer to it.

COMPONENT MODEL NAME FOR MDR-DS8000

DIGITAL SURROUND PROCESSOR DP-IF8000 CORDLESS STEREO HEADPHONES MDR-IF8000

SPECIFICATIONS

Digital surround processor (DP-IF8000)

Decoder functions Dolby Digital

Dolby Pro Logic II DTS DTS-ES 6.1ch MPEG-2 AAC

Virtual sound function OFF

Virtual front

Virtual surround 5.1 & 6.1 Modulation System DQPSK Secondary carrier wave frequency 4.5 MHz Transmission distance Approx.10 m to the front Transmission range 12 – 24,000 Hz Distortion rate 1 % or less (1 kHz) Audio inputs Optical input (rectangular-type) × 2

DIGITAL SURROUND HEADPHONE SYSTEM

× 1 Power requirements DC 9 V (from the supplied

Dimensions (w/h/d) Approx.85 × 190 × 200 mm

Mass Approx.1.0 kg(2 lb 30 oz)

Cordless stereo headphones(MDR-IF8000)

Playback frequency range 12 – 24,000 Hz Power requirements Rechargeable nickel metal hydride

Mass Approx. 350 g (10 oz)(including the

Analogue input (pinjack left/- right)

AC power adaptor)

(3 3 /8 × 7 1 /2 × 7

batteries (supplied or sold separately) or R6 (size AA) alkaline batteries

supplied rechargable nickel-metal hydride batteries)

/8 inch)

−Continued on next page−

9-873-526-01

Sony Corporation

Personal Audio Company Published by Sony Engineering Corporation

MDR-DS8000

Supplied accessories

Stand for digital surround processor (1) AC power adaptor (9 V)(1) Rechargeable nickel-metal hydride batteries NH-AA(1600mAh min.)(2) Battery charger (1) Charging plug for battery charger (1) (UK,Hong Kong and European model only) Optical digital connecting cable (rectangular plug y rectangular plug,1.5 m)(1) Operating Instructions (1) Product Information (1)

Design and specifications are subject to change without notice.

PART LIST

Ref. No. Part No. Description Remark

ACCESSORIES

************

0 501 1-467-817-11 ADAPTOR, AC (AC-S911) (US,CND) 0 501 1-473-581-11 ADAPTOR, AC (AC-S911) (AEP)

502 1-477-064-11 CHARGER, BATTERY (US,CND) 502 1-756-271-11 CHARGER, BATTERY (AEP) 503 1-756-272-11 BATTERY, NICKEL HYDROGEN (US,CND)

503 1-756-272-21 BATTERY, NICKEL HYDROGEN (AEP) 504 1-783-868-61 CORD, CONNECTION (OPTICAL DIGITAL CABLE)

0 506 1-769-608-11 CORD, POWER (AEP)

507 4-213-827-11 STAND

AC power adaptor (1)

3-238-629-12 MANUAL, INSTRUCTION (ENGLISH, FRENCH,

SPANISH)

3-238-629-22 MANUAL, INSTRUCTION (GERMAN, DUTCH,

ITALIAN, PORTUGUESE) (AEP) 4-213-922-01 SCREW, COIN 4-984-729-01 FOOT, RUBBER

Battery charger (1)

501 502

Rechargeable nickel-metal hydride batteries NH-AA (2)

503

Charging plug (for battery charger) (1) (European model only)

506

Optical digital connecting cable (rectangular type y rectangular type) (1)

504

Stand (for the processor) (1)

507

Note)

The designation of part of the figure are just as described in the instraction manual.

The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified.

Les composants identifiés par une marque 0 sont critiques pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifié.

+ 2 hidden pages