Sony C6916, L39t, L39u, Xperia Z1 Test Instructions

1279-7193 Rev 3

 Sony Mobile Communications AB – Company Internal

Go/No Go Test

C6916 / L39t / L39u

Xperia

TM

Z1

1279-7193 Rev 3

 Sony Mobile Communications AB – Company Internal

2(8)

Test and Calibration Repair Instruction

CONTENTS

Go/No Go Testing ................................................................................. 3

1.1 Antenna Coupler C6916, L39t and L39u no LTE ................................ 3

1.2 Antenna Coupler L39t no TD-SCDMA/ C6916 L39u all bands ........... 3

1.3 Attenuation Factors ............................................................................. 5

1.3.1 Loss Values – Antenna Coupler CMU-Z11 ................................................ 5

1.3.2 Loss Values – Antenna Coupler CMW-Z11 ................................................ 6

2 Revision History ............................................................................. 8

C6916 no LTE bands is implemented in SERPII.
L39t no TD-SCDMA, no LTE bands is implemented in SERPII.
L39t no TD-SCDMA bands /L39u C6916 all bands is implemented in

CMWrun.
L39t only TD-SCDMA bands is implemented in Sony Lector.
L39u no LTE bands is implemented in SERPII.

1279-7193 Rev 3

 Sony Mobile Communications AB – Company Internal

3(8)

For more information on Antenna Coupler and Cable in shield box testing, refer to
1220-1336: Generic Repair Manual – electrical, section ‘Setup Go/NoGo Test’!

For part no’s on the equipment below, refer to the ‘Tools Catalogue/Matrix’!

1.1 Antenna Coupler C6916, L39t
and L39u no LTE

The following equipment has to be used:
 Rohde & Schwartz RF Shield Package

- Rohde & Schwartz RF Shield Box CMU-Z11

- Rohde & Schwartz RF Coupler

- Grid Positioning Holder

 RF Test Cable Flexible 1M
 RF Adapter for RF Shield Box
 Micro USIM Card, instrument specific

GSM-850/900/1800/1900
WCDMA-850/900/1700/1900/2100
TD-SCDMA-BAND 34/39

Put the grid positioning holder with its reference point in
position F11 and place the phone as shown in the adjacent
picture.

A FEDB C G H I NMLJ K O P Q R

25

15

16

17

18

19

20

21

22

23

24

14

4

5

6

7

8

9

10

11

12

13

1

2

3

A FEDB C G H I NMLJ K O P Q R

25

15

16

17

18

19

20

21

22

23

24

14

4

5

6

7

8

9

10

11

12

13

1

2

3

1.2 Antenna Coupler L39t no
TD-SCDMA/ C6916 L39u all
bands

The following equipment has to be used:

• Rohde & Schwartz RF Shield Package

- Rohde & Schwartz RF Shield Box

- Rohde & Schwartz RF Coupler CMW-Z11

- Grid Positioning Holder

• RF Test Cable Flexible 1M

• RF Adapter for RF Shield Box

• Micro USIM Card, instrument specific

GSM-850/900/1800/1900
WCDMA-850/900/1700/1900/2100
FDD-LTE-BAND 3/4/7/17
TDD-LTE-BEND 38/39/40/41

Put the grid positioning holder with its reference point in
position i13 and place the phone as shown in the adjacent
picture.

Go/No Go Testing

This Go/No Go testing has to be carried out with an:
 Antenna Coupler.

Test and Calibration Repair Instruction