Sony KV-SW292M91K User Manual

2-657-522-11 (1)

Trinitron Color TV

Operating Instructions

• Before operating the unit, please read this manual thoroughly and retain it for future reference.

Инструкция по эксплуатации

• Перед работой с устройством внимательно прочтайте инструкцию и сохраните её для дальнейшего использования.

KV-SW292

M91K

WARNING

• Dangerously high voltages are present inside the TV.

• TV operating voltage: 220 – 240 V AC.

• Do not plug in the power cord until you have completed making all other connections; otherwise a minimum leakage current might flow through the antenna and other terminals to ground.

• To avoid battery leakage and damage to the remote, remove the batteries from the remote if you are not going to use it for several days. If any liquid leaks from the batteries and touches your skin, immediately wash it away with water.

For your own safety, do not touch any part of the TV, the power cord and the antenna cable during lightning storms.

Do not place any objects on the TV. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

Do not block the ventilation openings of the TV. Do not install the TV in a confined space, such as a bookcase or built-in cabinet.

Do not open the cabinet and the rear cover of the TV as high voltages and other hazards are present inside the TV. Refer servicing and disposal of the TV to qualified personnel.

For children’s safety, do not leave children alone with the TV. Do not allow children to climb onto it.

Do not operate the TV if any liquid or solid object falls into it. Have it checked immediately by qualified personnel only.

Your TV is recommended for home use only. Do not use the TV in any vehicle or where it may be subject to excessive dust, heat, moisture or vibrations.

Clean the TV with a dry and soft cloth. Do not use benzine, thinner, or any other chemicals to clean the TV. Do not attach anything (e.g., adhesive tape, cellophane tape, glue) on the painted cabinet of the TV. Do not scratch the picture tube.

To prevent fire or shock hazard, do not expose the TV to rain or moisture.

Install the TV on a stable TV stand and floor which can support the TV set weight. Ensure that the TV stand surface is flat and its area is larger than the bottom area of the TV.

Do not plug in too many appliances to the same power socket. Do not damage the power cord.

Pull the power cord out by the plug. Do not pull the power cord itself. Even if your TV is turned off, it is still connected to the AC power source (mains) as long as the power cord is plugged in. Unplug the TV before moving it or if you are not going to use it for several days.

Table of Contents

Installation

Securing the TV .................................... 4

Getting Started ..................................... 5

Setting up your TV

(“Initial Setup”) .................................... 6

Overview of Controls

TV front and rear panels..................... 8

Using the remote control and

basic functions ...................................... 9

Advanced Operations

Selecting the picture and sound

modes .................................................. 11

Enjoying the Party Mode .................. 12

Listening to the FM Radio ................ 13

Enjoying stereo or bilingual

programs ............................................. 14

Viewing Teletext ................................. 15

Menu Adjustment

Introducing the WEGA GATE

navigator ............................................. 16

“Settings” Adjustment ...................... 17

Changing the “Picture” setting........ 18

Changing the “Sound” setting......... 19

Changing the “Channel Setup”

setting .................................................. 20

Changing the “Setup” setting .......... 22

Additional Information

Connecting optional components ... 23

Troubleshooting ................................. 25

Specifications ...................................... 27

Made in Malaysia.

Sony Corporation 6-7-35 Kitashinagawa, Shinagawa-ku, Tokyo, 141-0001 Japan.

Installation

x Securing the TV

To prevent the TV from falling, use the supplied screws, clamps and band to secure the TV.

20 mm

3.8 mm

screws clamps band

Screw the band to the TV stand and to the provided hole at the rear of your TV.

(1) Put a cord or chain through the clamps. (2) Screw one clamp to a wall or pillar and

the other clamp to the provided hole at the rear of your TV.

(1) Attach each end of a cord or chain to

the provided holders at the rear of your TV.

(2) Securely fix the attached cord or chain

to a wall or pillar using an attachment which can support the TV set weight.

Note

• Use only the supplied screws. Use of other screws may damage the TV.

4 Installation

x Getting Started

Step 1

Insert the batteries (supplied) into the remote.

Note

• Do not use old or different types of batteries together.

Installation

Step 2

Connect the antenna cable (not supplied) to 8 (antenna input) at the rear of the TV.

Tips

• Your TV can receive both TV and FM radio signal from the

appropriate connections through the 8 (antenna input) terminal (see page 23).

• You can also connect your TV to other optional components (see page 23).

Step 3

Plug in the power cord, then press ! on the TV to turn it on.

Note

• The 1 (standby) indicator flashes green for a few seconds when turning on the TV. This does not indicate a malfunction.

Step 4

Set up the TV by following the instructions of the “Начальная настройкa” (“Initial Setup”) menu (see page 6).

Installation

Setting up your TV

(“Initial Setup”)

When you turn on your TV for the first time, the “Начальная настройкa” (“Initial Setup”) menu will appear. You may change the menu language, preset the TV channels automatically, sort or edit the channels and adjust the picture position using the buttons on the remote control or TV front panel.

Press V or v to select the desired menu

language, then press .

The selected menu language appears.

Confirm

End

Press V or v to select “Yes”, then press

to preset the channels automatically.

The screen will indicate automatic presetting is in progress.

After all available channels have been tuned and stored, the “Program Sorting/Edit” menu appears automatically on the screen.

Select

Program:

TV System: Auto VHF Low

To skip automatic channel presetting, select “No”, then press

If the message “No channel found. Please connect cable/antenna” appears, check your TV connections, then press

The “Program Sorting/Edit” menu enables

you to sort and edit the channels.

a) If you wish to keep the channels in the current

condition, press WEGA GATE to exit.

b) Press V or v to select the program

number with the channel you wish to change. The selected channel will appear on the screen.

c) If you wish to store the channels in a

different order:

1) Press b to enter sorting mode.

2) Press V or v to select the new program

number position for your selected channel, then press B.

6 Installation

Program Sorting/Edit

PROG

Sorting:

Select

Program Sorting/Edit

PROG

Sorting mode

Select

SkipLabel

Off

Edit:

Confirm

SkipLabel

Off

Confirm

End

Exit

Off01

Exit

d) If you wish to edit the channels, press

Select

Confirm

to change to edit mode. Press b until the mode that you wish to edit is highlighted: Label, Skip, (block symbol). Then press

1) To label, press V or v to select the

alphanumeric characters for the label. Then press

2) To skip the program number, press V or v to

select “On”. Then press

You can skip this program number when using PROG +/-.

3) To block unwanted program number,

press V or v to select

. Then press .

e) Repeat step b) to d) if you wish to change other

channels.

Press WEGA GATE to go to the next menu.

Press B or b to adjust the bars on the top

and bottom of the menu if they are slanted, then press

“Picture V-Position” menu appears.

Select

Confirm

Exit

Installation

Exit

End

If the upper and lower bars are not

equally positioned to the top and bottom of the screen, press V or v to adjust them, then press

Select

End

Confirm

If no adjustment is necessary, then press .

To prevent this “Initial Setup” menu from

appearing again when you turn on the TV by pressing !, press V or v to select “No”, then press

To allow this menu to appear again, select “Yes”, then press

Tip

• You can immediately go to the end of the ”Initial Setup” menu by pressing WEGA GATE.

Installation

Overview of Controls

x TV front and rear panels

TV rear panel

RLY

134

TV front panel

MIC 1 MIC 2

Button/Terminal Function Page

L(MONO) R

678

WEGA GATE

1 ! Turn off or turn on the TV. 5

2 1 Standby indicator. 5 2 Wake Up indicator. 10 3 Remote control sensor. – 4 PROG +/– Select program number. – 5 2 +/– Adjust volume. – 6 t Select TV or video input. 23

WEGA GATE menu operations

4,5 V,v,B,b Select and adjust items. 16 6 Confirm selected items. 16 7 WEGA GATE Display or cancel WEGA GATE menu. 16

8 FM Listen to FM Radio. 13

t2 Video input terminal 2. 23

9 0 i Headphone jack. –

qa MIC 1, MIC 2 Microphone input terminal 1, 2. 12 qs Component video input terminal. 24 qd T Monitor output terminal. 24 qf t1, t3, t4 Video input terminal 1, 3, 4. 23 qg 8 Antenna input terminal. 23

PROG

8 Overview of Controls

x Using the remote control and basic

functions

qa qs

A/B

8 0

PROG

1 4 7

RETURN

WEGA

WEGA GATE

GATE

ql w;

Button Description Page

4 5

6 7

8 9

1 ?/1 Turn off temporarily or turn on the TV. – 2 a Display the TV program. – 3 Jump to last program number that has been –

watched for at least five seconds.

4 PROG +/– Select program number. – 5 2 +/– Adjust volume. – 8 Change the picture size: –

“On” (16:9 wide mode), “Off”.

9 Select surround mode options. 19 0

Display on-screen information.

–

qa Mute the sound. – qd t Select TV or video input. 23 qf 0 – 9 Input numbers. For program numbers 10 and –

above, enter the second digit within two seconds.

ql Select sound mode options with a 5-Band 11

Graphic Equalizer display.

w; Select picture mode options. 11

Overview of Controls

continue

Overview of Controls

continued

Button Description Page WEGA GATE menu operations

6 Confirm selected items. 16 7 WEGA GATE Display or cancel the WEGA GATE menu. qj V, v, B , b Select and adjust items.

RETURN Return to the previous level.

Timer operations

qg Set TV to turn on automatically according to the –

(Wake up timer)

(Sleep timer)

Teletext operations (green label)

, , , ,

(red, green,

yellow, blue)

PIP operations

, , V, v, B, b Not function for your TV. –

Stereo/bilingual operations

qs A/B Select stereo/bilingual mode. 13

desired period of time (max. of 12 hours). The indicator on TV lights up amber once

you set the wake up timer. If no buttons or controls are pressed for more than one hour after the TV is turned on using the wake up timer, the TV automatically goes into standby mode.

Set TV to turn off automatically according to the – desired period of time (max. of one hour and 30 min.).

All buttons are used for Teletext operations. 15

10 Overview of Controls

Advanced Operations

x Selecting the picture and sound

modes

You can select picture and sound modes and adjust the setting to your preference in the “Custom” option.

Selecting the picture mode

A/B

8 0

PROG

WEGA

WEGA GATE

RETURN

GATE

Selecting the sound mode

Press to select the desired sound mode. 5-Band Graphic Equalizer display will appear.

Press to select the desired picture mode.

Select To view

“Vivid” contrast and sharp pictures.

“Standard” normal pictures.

“Custom” the last adjusted picture setting

from the “Picture Adjustment” option in the menu (see page 18).

Select To listen to

“Dynamic” dynamic and clear sound that emphasizes both the low

Dynamic

and high tones.

100 300 1k 3k 8k

“Standard” sound that emphasizes voice and high tones.

“Custom” the last adjusted sound setting from the

Standard

100 300 1k 3k 8k

Custom

“Sound Adjustment” option in the menu (see page 19).

100 300 1k 3k 8k

Advanced Operations

x Enjoying the Party Mode

You can sing duet along with any music program of TV broadcast or with any audio/video equipment or create visual presentations (e.g., photos or video stories) with narration and favorite background music by using the Party Mode feature.

TV front panel

N O

F F O

MIC 1 MIC 2

Select the input connected to your audio/video equipment.

Connect the microphone (not supplied) to the microphone input terminal

and switch it on.

L(MONO) R

You can begin singing or speaking from the microphone at the last TV volume setting. You can press A/B button on remote control to switch between left (“L”) or right (“R”) channel sound for VCD karaoke source only (either music or vocal) when video input is selected and “Audio Input Fix” is set to “Off”.

Press WEGA GATE and select “Party Mode”.

Select “MIC 1 Level”, “MIC 2 Level” or “Echo Level”, then press . Press V,

v, B, or b to adjust the microphone volume and echo level of the microphone sound, then press .

If you want to reduce the vocal of the singer or speaker, select “On” from

“Vocal Reducer” and press (effective for non-karaoke stereo source only).

Party Mode Setup MIC 1 Level MIC 2 Level Echo Level Vocal Reducer: Off Audio Input Fix: Off Reset

Select

Confirm

End

Select “Audio Input Fix” and press , then press V or v to select the input

connected to the audio equipment from which you want to hear the sound: “Video1”, “Video 2”, “Video 3”, “Video 4” or “DVD”.

To revert to the original sound source, select “Off”, then press

Selecting “Reset” will set your TV to the factory settings (except for “Audio

Input Fix”).

Tip

• Microphone volume will be affected by TV volume.

Notes

• Be sure to adjust the microphone and echo level to the minimum level before plugging in and disconnecting the microphone.

• For your own safety, do not use or plug in the microphone during lightning storms.

• Keep microphone away from the speakers and adjust its volume to avoid acoustic feedback

(howling) and distortion.

• Vocal Reducer will set to “Off” if you select “L” or “R” channel sound.

12 Advanced Operations

x Listening to the FM Radio

You are able to listen to the FM radio stations using your TV.

To access to FM Radio mode:

Press WEGA GATE button and select “FM Radio” (see page 16).

Press FM button on the front panel (see page 8).

To exit from FM Radio mode:

Press WEGA GATE button, select the desired items: “TV” or “External Inputs”, then press

Press FM button on the front panel.

A/B

PROG

+/–

V, v, B, b

WEGA

GATE

. Select the desired TV channel or external inputs and press .

Listening to preset stations

A/B

RETURN

8 0

PROG

WEGA GATE

Access to FM Radio mode.

Press WEGA GATE button and select “Settings”.

Preset the desired FM radio stations in “FM Radio Setup” from “Channel Setup” menu (see page 20).

Exit from “Channel Setup” menu by pressing WEGA

GATE button. The selected preset FM radio station number and label will appear on the screen. To select the desired preset FM radio station, press PROG +/–.

Tip

• You can also use the 1-9 buttons on the remote control to directly select the desired preset FM radio station.

Listening to non-preset stations

Access to FM Radio mode.

Press V or v to search for the desired FM radio station. The preset number and

label will not be displayed. If the station has a weak signal, press B or b to fine tune the radio frequency

manually.

Notes

• You can only operate V, v, B and b functions using the remote control buttons in FM

Radio mode.

• The available radio frequency is only for temporary listening pleasure and cannot be stored in the memory.

• If the message “Please setup FM Radio” appears, display the “Channel Setup” menu and select “FM Radio Setup” to preset the desired FM radio stations (see page 20).

Note

• When a FM stereo program has static noise, press A/B until “Mono” appears. There will be no stereo effect, but the noise will be reduced.

Advanced Operations

Enjoying stereo or bilingual programs

You can enjoy stereo sound or bilingual programs of NICAM and A2 stereo systems by using the A/B button.

When receiving a NICAM program

Broadcasting On-screen display (Selected sound)

A/B

1 4 7

8 0

PROG

NICAM stereo

NICAM bilingual

NICAM monaural

NICAM

(Stereo sound)

NICAM Main (Main sound)

NICAM Main

(Main sound)

NICAM Sub

(Sub sound)

When receiving an A2 program

RETURN

WEGA GATE

Broadcasting On-screen display (Selected sound)

A2 stereo

A2 bilingual

Stereo

(Stereo sound)

Main

(Main sound)

Mono

(Regular sound)

Mono

(Regular sound)

Mono

(Regular sound)

Mono

(Regular sound)

Sub

(Sub sound)

Note

• If the stereo sound is noisy when receiving a stereo program, select “Mono”. The sound

becomes monaural but the noise is reduced.

14 Advanced Operations

x Viewing Teletext

Some TV stations broadcast an information service called Teletext which allows you to receive various information, such as stock market reports and news.

You can use the buttons on the remote to view Teletext.

To Do this

display a Teletext Press . Each time you press , the page on the screen changes as follows: TV picture Teletext t Teletext and TV t TV.

3 6 9

If there is no Teletext broadcast, “100” is displayed at the top left corner of the screen.

check the contents Press . of a Teletext service An overview of the Teletext contents,

including page numbers, appears on the screen.

select a Teletext page Press the number buttons to enter the

WEGA GATE

three-digit page number of the desired Teletext page. If you make a mistake, reenter the correct page number. To access the next or previous page, press

or .

hold (pause) a Press to display the symbol “ ” at Teletext display the top left corner of the screen. To

resume normal Teletext viewing, press

reveal concealed Press . information (e.g., To conceal the information, press the an answer to a quiz) button again.

enlarge the Teletext Press . Each time you press , the display Teletext display changes as follows:

Enlarge upper half t Enlarge lower half t Normal size.

stand by for a Teletext (1) Enter the Teletext page number that page while watching you want to refer to, then press . a TV program (2) When the page number is displayed,

press to show the text.

select a FASTEXT Press (red, green, yellow and blue) menu or the colored that corresponds to the desired menu or boxes page number.

turn off Teletext Press a.

(red,

green,

yellow,

blue)

A/B

RETURN

8 0

PROG

Note

• The FASTEXT feature can be used only when the FASTEXT broadcast is available.

Menu Adjustment

Confirm

Select

WEGA GATE

Settings

External Inputs

FM Radio Party Mode

x Introducing the WEGA GATE

navigator

WEGA GATE is a gateway that allows you access to preset TV channels, connected external inputs, FM Radio mode, Party Mode and “Settings” menu.

WEGA GATE TV External Inputs FM Radio Party Mode Settings

Select

Confirm

“FM Radio”

FM Radio

Preset 1:

---.--

Please setup FM Radio

Select Preset 1-9 Search

Fine

–PROG+

Exit

listen to the FM Radio (see page 13)

“TV”

“External Inputs”

“Party Mode”

“Settings”

01 02 03 04 05

Select

End

External Inputs

Video 1 Video 2

Video 3

Video 4

DVD

Select End

Party Mode Setup MIC 1 Level MIC 2 Level Echo Level Vocal Reducer: Off Audio Input Fix: Off Reset

Select

Confirm

Picture Picture Mode: Vivid

Picture Adjustment Color Temperature: Cool Intelligent Picture: On

watch the preset TV channels (see page 6)

Confirm

select the inputs for the connected equipment (see page 22)

Confirm

adjust your TV for Party Mode (see page 12)

End

change the settings of your TV (see page 17)

Select

Confirm

End

How to use WEGA GATE

WEGA GATE TV External Inputs

FM Radio Party Mode

Settings

Select

(1) Press WEGA GATE to display or cancel

Confirm

(3) Press V or v to select the desired item.

the WEGA GATE menu.

01 02 03 04 05

Select

End

(2) Press (or b) to confirm your selection

or go to the next level.

Confirm

(4) Press RETURN to move to the previous

level.

Tip

• The WEGA GATE, and V,v,B,b buttons on the front panel can also be used for the operations

above.

16 Advanced Operations

Select

End

01 02 03 04 05

Confirm

+ 37 hidden pages