Sony KV-SW292M91, KV-SW252M91 User Manual

2-655-047-11 (1)
Trinitron Color TV
Operating Instructions
• Before operating the unit, please read this manual thoroughly and retain it for future reference.
Инструкция по эксплуатации
Перед работой с устройством внимательно прочтайте инструкцию и сохраните её для дальнейшего использования.
GB
RU
KV-SW292 KV-SW252
© 2005 Sony Corporation
M91
WARNING
• Dangerously high voltages are present inside the TV.
• TV operating voltage: 220 – 240 V AC.
• Do not plug in the power cord until you have completed making all other connections; otherwise a minimum leakage current might flow through the antenna and other terminals to ground.
• To avoid battery leakage and damage to the remote, remove the batteries from the remote if you are not going to use it for several days. If any liquid leaks from the batteries and touches your skin, immediately wash it away with water.
For your own safety, do not touch any part of the TV, the power cord and the antenna cable during lightning storms.
Do not place any objects on the TV. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.
Do not block the ventilation openings of the TV. Do not install the TV in a confined space, such as a bookcase or built-in cabinet.
Do not open the cabinet and the rear cover of the TV as high voltages and other hazards are present inside the TV. Refer servicing and disposal of the TV to qualified personnel.
For children’s safety, do not leave children alone with the TV. Do not allow children to climb onto it.
Do not operate the TV if any liquid or solid object falls into it. Have it checked immediately by qualified personnel only.
Your TV is recommended for home use only. Do not use the TV in any vehicle or where it may be subject to excessive dust, heat, moisture or vibrations.
Clean the TV with a dry and soft cloth. Do not use benzine, thinner, or any other chemicals to clean the TV. Do not attach anything (e.g., adhesive tape, cellophane tape, glue) on the painted cabinet of the TV. Do not scratch the picture tube.
To prevent fire or shock hazard, do not expose the TV to rain or moisture.
Install the TV on a stable TV stand and floor which can support the TV set weight. Ensure that the TV stand surface is flat and its area is larger than the bottom area of the TV.
Do not plug in too many appliances to the same power socket. Do not damage the power cord.
Pull the power cord out by the plug. Do not pull the power cord itself. Even if your TV is turned off, it is still connected to the AC power source (mains) as long as the power cord is plugged in. Unplug the TV before moving it or if you are not going to use it for several days.
2
Table of Contents
Installation
Securing the TV .................................... 4
Getting Started ..................................... 5
Setting up your TV
(“Initial Setup”) .................................... 6
Overview of Controls
TV front and rear panels..................... 8
Using the remote control and
basic functions ...................................... 9
Advanced Operations
Selecting the picture and sound
modes .................................................. 11
Listening to the FM Radio ................ 12
Enjoying stereo or bilingual
programs ............................................. 13
Viewing Teletext ................................. 14
Menu Adjustment
Introducing the WEGA GATE
navigator ............................................. 15
“Settings” Adjustment ...................... 16
Changing the “Picture” setting........ 17
Changing the “Sound” setting......... 18
Changing the “Channel Setup”
setting .................................................. 19
Changing the “Setup” setting .......... 21
GB
Additional Information
Connecting optional components ... 22
Troubleshooting ................................. 24
Specifications ...................................... 26
Made in Malaysia.
Sony Corporation 6-7-35 Kitashinagawa, Shinagawa-ku, Tokyo, 141-0001 Japan.
3
Installation
x Securing the TV
To prevent the TV from falling, use the supplied screws, clamps and band to secure the TV.
20 mm
3.8 mm
screws clamps band
Screw the band to the TV stand and to the provided hole at the rear of your TV.
or
(1) Put a cord or chain through the clamps. (2) Screw one clamp to a wall or pillar and
the other clamp to the provided hole at the rear of your TV.
or
(1) Attach each end of a cord or chain to
the provided holders at the rear of your TV.
(2) Securely fix the attached cord or chain
to a wall or pillar using an attachment which can support the TV set weight.
Note
• Use only the supplied screws. Use of other screws may damage the TV.
4 Installation
x Getting Started
Step 1
b
b
Insert the batteries (supplied) into the remote.
Note
• Do not use old or different types of batteries together.
Installation
Step 2
Connect the antenna cable (not supplied) to 8 (antenna input) at the rear of the TV.
Tips
• Your TV can receive both TV and FM radio signal from the
appropriate connections through the 8 (antenna input) terminal (see page 22).
• You can also connect your TV to other optional components (see page 22).
Step 3
Plug in the power cord, then press ! on the TV to turn it on.
Note
• The 1 (standby) indicator flashes green for a few seconds when turning on the TV. This does not indicate a malfunction.
Step 4
Set up the TV by following the instructions of the “Начальная настройкa” (“Initial Setup”) menu (see page 6).
Installation
5
x
Confirm
Select
End
Program:
TV System: Auto
01
VHF Low
End
Program Sorting/Edit
01 02
03
04
Off
Off
Off
Sorting mode
PROG
SkipLabel
Off01
Exit
Select
Confirm
Setting up your TV
(“Initial Setup”)
When you turn on your TV for the first time, the “Initial Setup” menu will appear. You may change the menu language, preset the TV channels automatically, sort or edit the channels and adjust the picture position using the buttons on the remote control or TV front panel.
Press V or v to select the desired menu
1
language, then press .
The selected menu language appears.
Press V or v to select “Yes”, then press
2
to preset the channels automatically.
The screen will indicate automatic presetting is in progress.
After all available channels have been tuned and stored, the “Program Sorting/Edit” menu appears automatically on the screen.
To skip automatic channel presetting, select “No”, then press
.
If the message “No channel found. Please connect cable/antenna” appears, check your TV connections, then press
.
Select
Confirm
End
The “Program Sorting/Edit” menu enables
3
you to sort and edit the channels.
a) If you wish to keep the channels in the current
b) Press V or v to select the program
c) If you wish to store the channels in a
6 Installation
condition, press WEGA GATE to exit.
number with the channel you wish to change. The selected channel will appear on the screen.
different order:
1) Press b to enter sorting mode.
2) Press V or v to select the new program
number position for your selected channel, then press B.
Program Sorting/Edit
PROG
Sorting:
Select
SkipLabel
01
Off
02
Off
03
Off
04
Off
Edit:
Confirm
Exit
d) If you wish to edit the channels, press
Select
Confirm
to change to edit mode. Press b until the mode that you wish to edit is highlighted: Label, Skip, Then press
.
(block symbol).
1) To label, press V or v to select the
alphanumeric characters for the label. Then press .
2) To skip the program number, press V or v to
select “On”. Then press . You can skip this program number when
using PROG +/-.
3) To block unwanted program number,
press V or v to select . Then press .
Select
Select
Confirm
Confirm
Exit
Installation
Exit
e) Repeat step b) to d) if you wish to change other
channels.
Select
Confirm
Press WEGA GATE to go to the next menu.
Press B or b to adjust the bars on the top
4
and bottom of the menu if they are slanted, then press
.
Select
Confirm
“Picture V-Position” menu appears.
If the upper and lower bars are not
5
equally positioned to the top and bottom of the screen, press V or v to
Confirm
adjust them, then press
.
If no adjustment is necessary, then press
To prevent this “Initial Setup” menu from
6
appearing again when you turn on the TV
.
Select
by pressing !, press V or v to select “No”, then press
.
To allow this menu to appear again, select “Yes”, then press
Tip
• You can immediately go to the end of the ”Initial Setup” menu by pressing WEGA GATE.
.
Exit
End
End
Installation
7
Overview of Controls
x TV front and rear panels
TV rear panel
WEGA GATE
L(MONO) R
FM
PROG
2
qf
qa
RLY
3
1
qs
qd
B
C
C
R
TV front panel
0
9
L(MONO) R
2
678
WEGA GATE
FM
45
PROG
3
2
1
Button/Terminal Function Page
1 ! Turn off or turn on the TV. 5
2 1 Standby indicator. 5 2 Wake Up indicator. 10 3 Remote control sensor. 4 PROG +/– Select program number. 5 2 +/– Adjust volume. 6 t Select TV or video input. 22
WEGA GATE menu operations
4,5 V,v,B,b Select and adjust items. 15 6 Confirm selected items. 15 7 WEGA GATE Display or cancel WEGA GATE menu. 15
8 FM Listen to FM Radio. 12
t2 Video input terminal 2. 22
9 0 i Headphone jack.
qa Component video input terminal. 23 qs T Monitor output terminal. 23 qd t1, t3 Video input terminal 1, 3. 22 qf 8 Antenna input terminal. 22
8 Overview of Controls
x Using the remote control and basic
functions
0
qa qs
A/B
qd
3
2
6
5
9
8 0
PROG
qf
1 4 7
qg
qh
qj
qk
RETURN
RETURN
WEGA
WEGA GATE
GATE
ql w;
TV
Button Description Page
1
2
3
4 5
6 7
8 9
1 ?/1 Turn off temporarily or turn on the TV. 2 a Display the TV program. 3 Jump to last program number that has been
watched for at least five seconds.
4 PROG +/– Select program number. 5 2 +/– Adjust volume. 8 Change the picture size:
“On” (16:9 wide mode), “Off”.
9 Select surround mode options. 18 0 qa Mute the sound.
Display on-screen information.
qd t Select TV or video input. 22 qf 0 – 9 Input numbers. For program numbers 10 and
above, enter the second digit within two seconds.
ql Select sound mode options with a 5-Band 11
Graphic Equalizer display.
w; Select picture mode options. 11
Overview of controls
continue
Overview of Controls
9
continued
Button Description Page WEGA GATE menu operations
6 Confirm selected items. 15 7 WEGA GATE Display or cancel the WEGA GATE menu. qj V, v, B , b Select and adjust items.
RETURN Return to the previous level.
qk
Timer operations
qg Set TV to turn on automatically according to the
(Wake up timer)
qh
(Sleep timer)
Teletext operations (green label)
, , , ,
, , , ,
(red, green,
yellow, blue)
PIP operations
, , V, v, B, b Not function for your TV.
Stereo/bilingual operations
qs A/B Select stereo/bilingual mode. 13
desired period of time (max. of 12 hours). The indicator on TV lights up amber once
you set the wake up timer. If no buttons or controls are pressed for more than one hour after the TV is turned on using the wake up timer, the TV automatically goes into standby mode.
Set TV to turn off automatically according to the – desired period of time (max. of one hour and 30 min.).
All buttons are used for Teletext operations. 14
10 Overview of Controls
Advanced Operations
x Selecting the picture and sound
modes
You can select picture and sound modes and adjust the setting to your preference in the “Custom” option.
Selecting the picture mode
A/B
3
1
2
6
4
5
9
7
8 0
PROG
WEGA
WEGA GATE
RETURN
RETURN
GATE
TV
Selecting the sound mode
Press to select the desired sound mode. 5-Band Graphic Equalizer display will appear.
Press to select the desired picture mode.
Select To view
“Vivid” contrast and sharp pictures.
“Standard” normal pictures.
“Custom” the last adjusted picture setting
from the “Picture Adjustment” option in the menu (see page 17).
Select To listen to
“Dynamic” dynamic and clear sound that emphasizes both the low
Dynamic
and high tones.
100 300 1k 3k 8k
“Standard” sound that emphasizes voice and high tones.
“Custom” the last adjusted sound setting from the
Standard
100 300 1k 3k 8k
Custom
“Sound Adjustment” option in the menu (see page 18).
100 300 1k 3k 8k
Advanced Operations
11
x Listening to the FM Radio
You are able to listen to the FM radio stations using your TV.
To access to FM Radio mode:
Press WEGA GATE button and select “FM Radio” (see page 15).
or
Press FM button on the front panel (see page 8).
To exit from FM Radio mode:
Press WEGA GATE button, select the desired items: “TV” or “External Inputs”, then press
Press FM button on the front panel.
A/B
PROG
+/–
V, v, B, b
WEGA
GATE
. Select the desired TV channel or external inputs and press .
or
Listening to preset stations
A/B
RETURN
3
1
2
6
4
5
9
7
8 0
PROG
WEGA GATE
TV
Access to FM Radio mode.
1
Press WEGA GATE button and select “Settings”.
2
Preset the desired FM radio stations in “FM Radio Setup” from “Channel Setup” menu (see page 19).
Exit from “Channel Setup” menu by pressing WEGA
3
GATE button. The selected preset FM radio station number and label will appear on the screen. To select the desired preset FM radio station, press PROG +/–.
Tip
• You can also use the 1-9 buttons on the remote control to directly select the desired preset FM radio station.
Listening to non-preset stations
Access to FM Radio mode.
1
Press V or v to search for the desired FM radio station. The preset number and
2
label will not be displayed. If the station has a weak signal, press B or b to fine tune the radio frequency
3
manually.
Notes
• You can only operate V, v, B and b functions using the remote control buttons in FM
Radio mode.
• The available radio frequency is only for temporary listening pleasure and cannot be stored in the memory.
• If the message “Please setup FM Radio” appears, display the “Channel Setup” menu and select “FM Radio Setup” to preset the desired FM radio stations (see page 19).
Note
• When a FM stereo program has static noise, press A/B until “Mono” appears. There will be no stereo effect, but the noise will be reduced.
12 Advanced Operations
x
Enjoying stereo or bilingual programs
You can enjoy stereo sound or bilingual programs of NICAM and A2 stereo systems by using the A/B button.
When receiving a NICAM program
Broadcasting On-screen display (Selected sound)
A/B
A/B
1 4 7
3
2
6
5
9
8 0
PROG
NICAM stereo
NICAM bilingual
NICAM monaural
NICAM
(Stereo sound)
t
NICAM Main (Main sound)
t
NICAM Main (Main sound)
t
t
NICAM Sub
tt
(Sub sound)
t
When receiving an A2 program
RETURN
WEGA GATE
TV
Broadcasting On-screen display (Selected sound)
A2 stereo
A2 bilingual
Stereo
(Stereo sound)
t
Main
(Main sound)
t
t
t
Mono
(Regular sound)
Mono
(Regular sound)
Mono
(Regular sound)
Mono
(Regular sound)
Sub
(Sub sound)
Note
• If the stereo sound is noisy when receiving a stereo program, select “Mono”. The sound becomes monaural but the noise is reduced.
Advanced Operations
13
x Viewing Teletext
Some TV stations broadcast an information service called Teletext which allows you to receive various information, such as stock market reports and news.
You can use the buttons on the remote to view Teletext.
To Do this
display a Teletext Press . Each time you press , the page on the screen changes as follows: TV picture Teletext t Teletext and TV t TV.
3
3 6
6 9
9
If there is no Teletext broadcast, “100” is displayed at the top left corner of the screen.
check the contents Press . of a Teletext service An overview of the Teletext contents,
including page numbers, appears on the screen.
select a Teletext page Press the number buttons to enter the
WEGA
WEGA
WEGA
GATE
GATE
GATE
three-digit page number of the desired Teletext page. If you make a mistake, reenter the correct page number. To access the next or previous page, press
or .
hold (pause) a Press to display the symbol “ ” at Teletext display the top left corner of the screen. To
resume normal Teletext viewing, press
.
reveal concealed Press . information (e.g., To conceal the information, press the an answer to a quiz) button again.
enlarge the Teletext Press . Each time you press , the display Teletext display changes as follows:
Enlarge upper half t Enlarge lower half t Normal size.
stand by for a Teletext (1) Enter the Teletext page number that page while watching you want to refer to, then press . a TV program (2) When the page number is displayed,
press to show the text.
select a FASTEXT Press (red, green, yellow and blue) menu or the colored that corresponds to the desired menu or boxes page number.
turn off Teletext Press a.
,
(red,
green,
yellow,
blue)
A/B
A/B
RETURN
RETURN
RETURN
1
2
1
2
4
5
4
5
7
8
7
8 0
0
PROG
PROG
TV
TV
Note
• The FASTEXT feature can be used only when the FASTEXT broadcast is available.
14 Advanced Operations
Menu Adjustment
x Introducing the WEGA GATE
navigator
WEGA GATE is a gateway that allows you access to preset TV channels, connected external inputs, FM Radio mode and “Settings” menu.
WEGA GATE TV External Inputs FM Radio Settings
Select
Confirm
“TV”
“External Inputs”
“FM Radio”
“Settings”
How to use WEGA GATE
WEGA GATE TV External Inputs
FM Radio
Settings
Select
(1) Press WEGA GATE to display or cancel
the WEGA GATE menu.
TV
01 02 03 04 05
Select
End
(2) Press (or b) to confirm your selection
or go to the next level.
Tip
• The WEGA GATE, and V,v,B,b buttons on the front panel can also be used for the operations
above.
Confirm
Confirm
TV
01 02 03 04 05
Select
End
External Inputs
1
Video 1 Video 2
2
Video 3
3
DVD
Select End
FM Radio
Preset 1:
---.--
Please setup FM Radio
Select Preset 1-9 Search
—PROG+
Exit
Fine
Picture
Picture Mode: Vivid
Picture Adjustment Color Temperature: Cool Intelligent Picture: On
watch the preset TV channels (see page 6)
Confirm
select the inputs for the connected equipment (see page 22)
Confirm
listen to the FM Radio (see page 12)
change the settings of your TV (see page 16)
Select
Confirm
TV
Select
End
End
01 02 03 04 05
Confirm
(3) Press V or v to select the desired item.
WEGA GATE TV External Inputs
FM Radio
Settings
Select
Confirm
(4) Press RETURN to move to the previous
level.
Menu Adjustment
15
x “Settings” Adjustment
You are able to change the settings of your TV from “Settings” in WEGA GATE menu. Press WEGA GATE button to display WEGA GATE menu. Press V or v to select “Settings” and press
The following is an overview of the items that can be adjusted.
.
Picture
Picture Mode: Vivid
Picture Adjustment Color Temperature: Cool Intelligent Picture: On
Select
Select
Select
Select
Confirm
Sound
Sound Mode: Dynamic
Sound Adjustment Balance Intelligent Volume: Surround: Off
Confirm
Channel Setup Auto Program Manual Program
Program Sorting/Edit FM Radio Setup
Confirm
Setup Language: Picture Position Video Label
Color System: Auto Factory Settings
Confirm
End
Off
End
End
English
End
“Picture” (see page 17)
“Picture Mode”: “Vivid” “Standard” “Custom” “Picture Adjustment”: “Picture”, “Brightness”, “Color”, “Hue”,
“Sharpness”, “Reset” “Color Temperature”: “Cool” “Neutral” “Warm” “Intelligent Picture”: “On” “Off”
“Sound” (see page 18)
“Sound Mode”: “Dynamic” “Standard” “Custom” “Sound Adjustment”: “Adjust”, “Reset” “Balance” “Intelligent Volume”: “On” “Off” “Surround”: “On” “Simulated” “Off”
“Channel Setup” (see page 19)
“Auto Program” “Manual Program”
“Program”: “00” - “99” “TV System”: “B/G” “I” “D/K” “M” “VHF Low”/“VHF High”/“UHF” “Fine”: “Auto” “Manual”
“Signal Booster”: “Auto” “Off” “Program Sorting/Edit” “FM Radio Setup”
“Setup” (see page 21)
“Language”: “English” “ ” (Russian) “Picture Position”: “Picture Rotation”, “Picture V-Position” “Video Label”: “Video Input”, “Label” “Color System”: “Auto” “PAL” “SECAM” “NTSC3.58”
“NTSC4.43”
“Factory Settings”: “Yes” “No”
Note
• When a feature is dimmed in the menu, it is not selectable.
16 Menu Adjustment
Loading...
+ 35 hidden pages