How it Works
Sony
Loading...
KV-AR25

Sony KV-AR29, KV-AR25 Operating Instructions Manual

4-091-882-11 (1)
Trinitron Color TV
Operating Instructions
KV-AR29
GB
KV-AR25
© 2002 Sony Corporation
Sony KV-AR25N90 Group R18 (GB)_4-091-882-11 (1)
N90
WARNING
• Dangerously high voltages are present inside the TV.
• TV operating voltage: 110-240 V AC.
• Do not plug in the power cord until you have completed making all other connections; otherwise a minimum leakage current might flow through the antenna and other terminals to ground.
• To avoid battery leakage and damage to the remote, remove the batteries from the remote if you are not going to use it for several days. If any liquid leaks from the batteries and touches your skin, immediately wash it away with water.
For your own safety, do not touch any part of the TV, the power cord and the antenna cable during lightning storms.
To prevent fire or shock hazard, do not expose the TV to rain or moisture.
Do not block the ventilation openings of the TV. Do not install the TV in a confined space, such as a bookcase or built-in cabinet.
For children’s safety, do not leave children alone with the TV. Do not allow children to climb onto it.
Do not operate the TV if any liquid or solid object falls into it. Have it checked immediately by qualified personnel only.
Clean the TV with a dry and soft cloth. Do not use benzine, thinner, or any other chemicals to clean the TV. Do not attach anything (e.g., adhesive tape, cellophane tape, glue) on the painted cabinet of the TV. Do not scratch the picture tube.
Do not open the cabinet and the rear cover of the TV as high voltages and other hazards are present inside the TV. Refer servicing and disposal of the TV to qualified personnel.
2
Your TV is recommended for home use only. Do not use the TV in any vehicle or where it may be subject to excessive dust, heat, moisture or vibrations.
Do not place any objects on the TV.
Install the TV on a stable TV stand and floor which can support the TV set weight. Ensure that the TV stand surface is flat and its area is larger than the bottom area of the TV.
Do not plug in too many appliances to the same power socket. Do not damage the power cord.
Pull the power cord out by the plug. Do not pull the power cord itself. Even if your TV is turned off, it is still connected to the AC power source (mains) as long as the power cord is plugged in. Unplug the TV before moving it or if you are not going to use it for several days.
3
x Securing the TV
To prevent the TV from falling, use the supplied screws, clamps and band to secure the TV.
20 mm
3.8 mm
screws clamps band
Screw the band to the TV stand and to the provided hole at the rear of your TV.
or
(1) Put a cord or chain through the clamps. (2) Screw one clamp to a wall or pillar and
the other clamp to the provided hole at the rear of your TV.
or
(1) Attach each end of a cord or chain to
the provided holders at the rear of your TV.
(2) Securely fix the attached cord or chain
to a wall or pillar using an attachment which can support the TV set weight.
Note
• Use only the supplied screws. Use of other screws may damage the TV.
4
Table of Contents
Installation
Getting Started ..................................... 6
Setting up your TV
(“INITIAL SETUP”) ............................. 7
Overview of Controls
TV front and rear panels ..................... 8
Remote control ..................................... 9
Advanced Operations
Selecting the picture and sound
modes .................................................. 11
Viewing the picture in wide mode.. 12
Listening with surround sound ....... 12
Setting the timers ............................... 13
Enjoying stereo or bilingual
programs ............................................. 14
Menu Adjustment
Introducing the menu system .......... 15
Changing the “PICTURE” setting ... 18
Changing the “SOUND” setting ..... 20
Changing the “SETUP” setting ........ 22
Changing the Channel Preset
(“CH PRESET”) setting ..................... 24
Additional Information
Connecting optional components ... 25
Troubleshooting ................................. 27
Specifications ...................... Back cover
GB
5
Installation
x Getting Started
1
Step 1
b
b
INITIAL SET
:
Insert the batteries (supplied) into the remote.
Note
• Do not use old or different types of batteries together.
Step 2
Connect the antenna cable (not supplied) to 8 (antenna input) at the rear of the TV.
Tip
• You can also connect your TV to other optional components (see page 25).
Step 3
Plug in the power cord, then press ! on the TV to turn it on.
Step 4
UP
ENG ILSHLAN UGAGE
Set up the TV by following the instructions of the “INITIAL SETUP” menu (see page 7).
6 Installation
x
MENU
PIC
MODE
SOUND
MODE
WIDE MODE
SURROUND
SOUND SWAP PIPTV/VIDEO
PIP CH
PIP CH
Setting up your TV
(“INITIAL SETUP”)
When you turn on your TV for the first time, the “INITIAL SETUP” menu will appear. This menu allows you to change the menu language, adjust the picture position and preset the TV channels automatically.
MENU
V/v/
Installation
Press V or v to select the desired
1
menu language (e.g.,”ENGLISH”), then press
.
The selected menu language appears.
If the “PIC ROTATION” bar is
2
slanted, press V or v to adjust it, then press
.
If no adjustment is necessary, then press .
The or icon on the screen flashes while adjusting.
Press V or v to select “YES”, then press
3
to preset the channels automatically
(see page 24).
To skip automatic channel presetting, select
“NO”, then press
Press V or v to select “NO”, then press
4
. The “INITIAL SETUP” menu will not
.
appear again the next time you turn on the TV by pressing !.
To allow this menu to appear again, select
“YES”, then press
.
Rotate anti-
clockwise
:
HI
UP
ENG ILSHLAN UGAGE
Rotate
clockwise
UP
ES
Y
NO
UP
S
ES
Y
NO
INITIAL SET
INITIAL SET
PIC ROTATION
Refer to this bar when adjusting.
UP
INITIAL SET
AUTO PROGRAM
START NOW?
INITIAL SET
DIS PAL
Y T ENUM
NEX T TIME?
Tips
• You can immediately go to the end of the ”INITIAL SETUP” menu by pressing MENU.
• You can also set up your TV using the menu system (see page 15).
Installation
7
Overview of Controls
x TV front and rear panels
TV rear panel
4
ENTER SELECT
AUTO PROGR
PROGRMENU
L(MONO) R
S VIDEO
qs
qa
COMPONENT VIDEO (DVD) IN
C
RLY
VIDEO
IN
123
qf
B CR
MONITOR
OUT
qd
VIDEO
AUDIO
TV front panel
S VIDEO
VIDEO 3 INPUT
9
VIDEO L(MONO) R
AUDIO
8
7
AUTO
PROGR
RETURN
TV/VIDEO
56
SELECT
VOLUME
4
CHANNELMENU
3
2
STANDBY/
STEREO/ WAKE UP
1
0
Button/Terminal Function Page
1 ! Turn off or turn on the TV. 6 2 STANDBY Standby indicator. – 2 WAKE UP Wake Up indicator. 13 2 STEREO Stereo/bilingual indicator. 14 3 Remote control sensor. – 4 CHANNEL +/– Select channel number. – 5 VOLUME +/– Adjust volume. – 6 TV/VIDEO Select TV or video input. – 7 AUTO PROGR Preset channels automatically. –
Menu operations
5 SELECT V/v Select and adjust items. 17 6 RETURN Confirm selected items. 17
8 MENU Display or cancel the menu. 17 9 VIDEO 3 INPUT Video input terminal 3. 25 0 i Headphone jack. – qa COMPONENT VIDEO Component video (DVD) input terminal. 26
(DVD) IN
qs 8 Antenna input terminal. 25 qd MONITOR OUT Monitor output terminal. 25 qf VIDEO IN 1, 2, 3 Video input terminal 1, 2, 3. 25
8 Overview of Controls
x Remote control
qd
qf qg qh
qj
qk
ql w;
wa
ws
MUTING
PIC
MODE
RESET
DISPLAY
MTS
DVD VIDEO TV
231
564
897
0
SOUND SWAP PIPTV/VIDEO
PIP CH
PIP CH
SOUND
SURROUND
MODE
CHVOL
WAKE UP SLEEP
TV
RM-992
ENTERJUMP
POWER
MENU
WIDE MODE
Button Function Page
1 POWER Turn off temporarily or –
turn on the TV.
1
2 MTS Select stereo/bilingual mode. 14
2
3 TV Display the TV program. –
3
4 0-9 Input numbers. – 5 ENTER Confirm input numbers. – 8 SURROUND Select surround mode. 12
4
9 WIDE MODE Select wide-mode (16:9). 12 q; CH +/– Select channel number. –
5
qd DISPLAY Display on-screen –
information.
qf MUTING Mute the sound. –
6
qg DVD Select component video 26
7
qh VIDEO
8
qj JUMP Jump to previous channel –
9
input.
Select TV or video input. 25
number
ql PIC MODE Select picture mode. 11 w; SOUND MODE Select sound mode. 11
q;
wa VOL +/– Adjust volume. – ws RESET Set TV to factory setting. 27
Timer operations
qa qs
qa SLEEP Set TV to turn off 13
automatically.
qs WAKE UP Set TV to turn on 13
automatically.
Menu operations
6 MENU Display the menu. 17 7 Confirm selected items. 17 qk
V, v, B , b Select and adjust items. 17
Overview of Controls
continue
Overview of Controls
9
Loading...
+ 21 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use