Sony KV-32FQ86U User Manual
KV-28FQ86U
Checking the
Connecting the Aerial and
KV-32FQ86U
Thank you for purchasing this Sony product.
After following this step by step guide you will be able to:
Insert Batteries into the Remote Control.
Connect the Aerial and VCR to your TV.
Select the language of the menu screens.
Adjust the picture slant.
Accessories Supplied
2 Batteries (AA size)
1
VCR
3
Connecting cables are not supplied.
or
VCR
OUT IN
The Scart lead is optional.
If you use this optional connection it can improve the picture and sound quality
when using a VCR.
If you do not use a SCART lead, after automatically tuning the TV refer to the
“Manual Programme Preset” option on page 18 step a) of the instruction manual,
to tune in the VCR channel to your TV.
Tune your TV.
Change the order in which channels are stored.
View TV Programmes.
RM-945
Remote Control
RM-945
Inserting Batteries into
the Remote Control
• Make sure you insert the supplied batteries using the correct
polarities.
• Always remember to dispose of used batteries in an
environmentally friendly way.
Switching on the TV
4
Connect the TV plug
to the mains socket.
2
The first time the TV set is connected, it
is usually turned on. If the TV is off,
push in the On/Off
switch on the front of the TV.
Quick Start Guide
FD Trinitron
Colour Television
©2004 Sony Corporation
Printed in Spain
4-103-129-01
Selecting the language of
1
2
q
3
Automatically Tuning
Changing the Programme Order
the menu screens
This TV set works with menu screens. By following the instructions
below, you can select the desired language of the menu screens.
5
RM-945
Language
Select language
English
Deutsch
Español
Français
Italiano
Nederlands
Dansk
Polski
Português
Tür k çe
Language
Select language
English
Deutsch
Español
Français
Italiano
Nederlands
Dansk
Polski
Português
Türkçe
If picture slants, please
adjust picture rotation.
Not necessary
Ελληνικά
Български
Svenska
Pyccкий
Česky
Magyar
Norsk
Suomi
Slovenski
Română
Ελληνικά
Български
Svenska
Pyccкий
Česky
Magyar
Norsk
Suomi
Slovenski
Română
Adjust now
The first time that you switch on your TV,
the Language menu appears automatically.
Press the
v or V button on the
remote control to select the language, then
press the OK button on the remote control
to confirm your selection.
The Picture Rotation menu appears on
the screen.
Correcting the Picture Slant
Because of the earth’s magnetism, the picture might slant.
By following the instructions below, you can correct the picture
slant if necessary.
If picture slants, please
adjust picture rotation.
Not necessary
Please connect your equipment
according to this chart
Adjust now
::33/
q
3
::22/ 2
DVD
OK
::11/ 1
a) If it is not necessary, press OK to select
Not necessary.
b) If it is necessary, press B or b to select
Adjust now, then press
OK and correct any slant of the
picture between –5 and +5 by
pressing
v or V. Finally press
OK to store.
A diagram will appear showing you
how to connect a wide range of
equipment to your TV set. Follow the
instructions and finally press the OK
button to remove the picture and
continue the automatic process.
6
the TV
You need to tune the TV to receive channels.
By following the instructions below, this TV automatically
searches and stores all available broadcast channels for you.
Press the OK button on the remote
control to select Yes.
The TV starts to automatically search and
store all available broadcast channels for
you.
This procedure could take a number
of minutes.
Please be patient and do not press
any buttons while the automatic
tuning is in progress. Otherwise the
automatic tuning will not be
completed.
In some countries the TV
Broadcaster installs the channels
automatically (ACI system). In this
case, the TV Broadcaster sends a
menu in which you can select your
city by pressing the
and OK to store the channels.
If no channels were found during the
auto tuning process then a new menu
appears automatically on the screen
asking you to connect the aerial.
Please connect the aerial (see step 3)
and press OK. The auto tuning
process will start again.
When the automatic tuning is finished, the
Programme Sorting menu appears on the
screen.
RM-945
Do you want to start
automatic tuning?
Yes No
Auto Tuning
Programmes found: 4
No channel found.
Please connect aerial
Confirm
Programme Sorting
01
TVE
02
TVE2
03
TV3
04
C33
05
C27
06
C58
07
S02
08
S06
7
v or V button
of the broadcast channels
By following the instructions below, you can rearrange the
order in which broadcast channels appear on the screen.
a) If you wish to keep the broadcast channels in the tuned order:
• Press the MENU button on the
remote control to exit and
return to the normal TV screen.
Your TV is now ready for use.
• Press the v or V button on the remote
control to select the programme
number with the broadcast channel
you wish to move, then press the
button.
• Press the
v or V button on the remote
control to select the new programme
number position for your selected
channel, then press the OK button.
• Repeat all the above steps if you wish
to change the order of the other
broadcast channels on your TV.
• Press the MENU button on the
remote control to exit and return to
the normal TV screen.
Your TV is now ready for use.
RM-945
Programme Sorting
01
TVE
02
TVE2
03
TV3
04
C33
05
C27
06
C58
07
S02
08
S06
b) If you wish to store the broadcast channels in a different
order:
Programme Sorting
01
TVE
02
TVE2
03
TV3
04
C33
05
C27
06
C58
07
S02
08
S06
Programme Sorting
01
TVE
02
TVE2
03
TV3
04
C33
05
C27
06
C58
07
S02
08
S06
01 TVE
8
b
Do you want to start
RM-945
automatic tuning?
Yes No
The automatic tuning menu appears
on the TV screen.
Your television stations are now stored in your television’s memory.
Loading...