Sony KLV-40U100M, KLV-32U100M Owner’s Manual

LCD HDTV Monitor

Operating Instructions

AVIA

KL V-32U lOOM KL V-40U lOOM

f \

Owner's Record

The model and serial nmnbers are located at the rear otthe unit. Record the_ numbers in the spaces provided below. Re_r to them whenever

you call upon your Sony dealer regarding this product.

Model No.

Serial No.

Contacting Sony

It, alter reading tile iollowing instrucfion_, you have additional

es is el ed o I e se ot y r S ly i , _le se c 11 le t

the lollowing numbers.

CIIstOIl/el'S ill the continenlal Ullited Slates contact the Direct

Response Cenler at:

1-800-222-SONY (7669)

or visit hltp://www.sony.com/TVsupport Ciis[omelS ila Canada COl3[ac[ tile Cuslolner Relations Center at:

1-877-899-SONY (7669)

or visit http://www.sony.com/rVsul_port

WARNING

To redu,-v tile risk of fire or electric sllock, do

not expose Ibis itpparotlls to rain or IllOisture,

alert the user 1(1tile presence of uninsulated 'dangerous

voltage" within the This symbol is intended to

prodllcl s enck)sure that

may be ol sufficient magnitude to constitute a

risk of electric shock to persons.

alert Ifie user 1o tile presence ol illlpoltant operalillg alld

maintenance (servicing) This symbol is intended to

instructions in tile literature accompanying the

appliance.

Tile apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, sucll as vases, shall be placed on the apparatus.

CAUTION

To t_l"e_ent electric shock, do not use this polarized AC plug with an extension cord,

receptacle or other outlet unless tile blades can be fully inserted to prevent blade exposure.

For Customers in the United States

llyou have any questions about this product,

you may cnll; Sony Customer hllormation

Services Center 1-800-222-7669 or

htlp://www,sony ,coin/

Declaration of Conformity

Trade Name: SONY

Model: KLV-32U 100M/KLV-40U 100M

Responsible Party: Sony Electronics lnc. Address: 1645(I W. Bernardo Dr,

San Diego, CA 92127 U.S.A. Telephone Nmnber: 858-942-2230

This dcvice complies with part 15 of tile FCC rules. Operation is subject to tile Iollowing two conditions: (1) This device may not cause harmfifl intcrlPrcnce, and (2) Ibis device nmst accept any intert)rence received, including inteflk:rence lhal may cause undesired operation.

NOTIFICATION

This equipment has been tested and lound to

conlply wdh the limits lor aClass B digital de_ice, pursuant to Part 15 oldie FCC Rules. These limits are designed m provide reasonable

protectfim against harmlul intertPrcnce in a

residential installatkm. This equipment

generates, uses and can radiate radio fi'cquency energy and, it not installed and used in accordance with the instructions, may cause

l/armlhl intcrlcrcnce to radii) comnnmications. However, there is no guarzmtee that intcrfiarcnce

will not occur ill a particular installation. If this equipment does cause harmflfl interlcrcnce to radio or television reception, which can be determined by turning tile equipment ofland on, the user is encouraged to tl3, to correct tile interlcrcnce by one or more of tile lollowing

measures: [] Reorient or relocate tile receiving

antenna.

[] Incrca_ tile separation betweml tile

equipment and receiver.

[] Connect tile equipment into an outlet on a

circuit dillcrcnt fi'onl that to whicll tile receivm" is connected.

[] Consuh the dealer or an experienced

radio/TV teclmician lor help.

Pursuant to FCC regulations, you arc cautioned that ally changes or modificg_tions not expressly approved in this manual could void your authority to operate this equipmmlt,

For Customers in Canada

This Class B digital apparatus complies wifl_ Canadiml ICES-t_B.

Safety

[] Operate tile unit only on 120 V AC. [] Use tile AC power cord specified by Sony

and suitable lor tile voltage where you use it.

[] The plug is designed, lot safi:ty purposes,

to fit into the wall outlet only one way. If you arc unable to insert the plug fully into tile outlet, contact your dealer.

[] If any liquid or solid object should l, dl

inside the cabinet, unplug the unit immediately and have it checked by qualified service personnel belorc operating it lhrther.

[] If you will not be using tile unit lor several

days, disconnect tile pow-er by pulling tile plug itself. Never pull on the cord.

[] For dctails concerning salcty precautions,

see "Important Salcty Instructions" on page 4 and "hnporlant Salcguards" on page 5.

Installing

[] Tile unit should be installed near an easily

accessible power outlet.

[] To prevent internal heat buildup, do not

block the ventilation openings.

[] Do not install tile unit in a hot or lmmid

place, or in a place subject to excessive dusl or mechanical vibration.

[] Avoid operating tile unit al temperatures

bdow 5°C (41°F).

[] If tile unit is transported directly fiom a

cold to a warln location, or if tile roonl temperature changes suddenly, the picture

may be blurred or show poor color due to moisture condensation. In this case,

please wait a l_:whours tOlet tile II/oisturc evaporate belore turning on the unit.

[] To obtain tile best picture, do not expose

the screen to direct illumination or direct sunlight. It is rccomnlcnded to use spot

lighting directed down l)om the ceiling or to cover tile windows that lace tile screen

with opaque drapery. It is desirable to install tile unit in a room where tile floor

and walls are not of a reflective material.

CAUTION

Use tile lollowing Sony appliance(s) only with tile lfilktwing WALL-MOUNT BRACKET.

Use with other WALL-MOUNT BRACKET may cause instability and possibly resuh in

injury.

SONY APPLIANCE MODEL NO. KLV-32U 100M KLV-40U 100M

SONY WALL-MOUNT BRACKET MODEL NO.

SU-WL31 ( KLV-32U 100M) SU-WL51 ( KLV-40U 100M)

To Customers

Sull_cient expertise is requir_xl lor installing tile specified product. Be sure to subcontract tile installation to Sony deMers or licen_d contractors and pay adequate alIention IOsalcty

during tile installation.

(C(mtim_ed)

For Customers in the United States

This product contains mercury. Disposal of this product may be regulated

if soM in the United States. For disposal or recycling inlormafion, please

contact your local authorities or the Elecnonics lndusnies Alliance (ht t p://ww w.eiae.org).

To Sony Dealers

For installation ol SONY WALL-MOUNT BRACKET, be sure to read

and lollow the insnuctions supplied with tho_ optkmal products.

Trademark Information

WOW, SRS and the (_)+ symbol are trademarks ol SRS Labs. Inc. WOW technology is incorporated under liccnse liom SRS Labs. Inc.

Licensed by BBE Sound, Inc. under USP4638258, 4482866. "BBE" and BBE symbol arc n:ademarks of BBE Sound, Inc. BBE High Definition Sound is lhlly activated maximizing the sound ell_:ct

in the WOW mode. Macintosh is a trademark licensed to Apple Computer. lnc.. registered in

the U.S.A and other counnies.

CineMotion is a registered trademark of Sony Colt_oration.

As an ENERGY STAR ¢) Parmcr. Sony Corporation has determined that this product meets the ENERGY STAR <_

guklelines lor energy elt]ciency.

j=l_lltI@Ig'ifalll

H_N This unit incorporates High-Definiti ....

HDMI, the HDMI logo and Higll-Definilion Multimedia Interlace are trademarks or registered tradenmrks of HDMI Liccnsing LLC.

ENERGY STAR _")is a U.S. registered mark.

Multimedia Interlace (HDMP M) technok_gy.

Important Safety Instructions

1} Read these instructions.

2) Keep these instructions. 31 Heed all warnmgs.

41 Follow- all instructions,

51 Do not use this apparatus near water.

6) Clean only with dry cloth. 71 Do not block any ventilation openings. Install in

accordance with the manufacturer's instructions.

81 Do not install near any heat sources ,,, ..... _+,

suchasradiators,heatregisters,

qoves, or other apparatus (uacludtng _: mnplifiersl that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two

blades with one wider than the other. A grounding type plug has two blades and a third grounding

prong. The wide blade or the third prong are provided for your safety. If the provided plug

does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10}Protect the power cord from being walked on or

pinched particularly at plugs, convemence receptacles, and the point where they exit from

the apparatus.

11_Only use attachments/accessories specified by the

manufacturer,

121Use only with the cart. stand, tripod, bracket, or

table specified by the manufacturer, or sold with the apparatus. When a cart is used. use caution

when moving the cart/apparatus combination to avoid injury from tip-over.

131Unplug this apparatus during lighming storms or

when unused for long period._ of time.

14_Refer all ,ervicing to qualified service personnel.

Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or

objects have fallen into the apparatus, the apparatus has been exposed to ram or moisture.

does not operate normally, or has been dropped.

Important

[] Unplug the AC power cord when

cleaning this unit. If not. it may result in electric shock.

Safeguards

Befol_ using your unit, please l_ad these inswucdons completely, and kt*epthis manual fPr future reference

Carefully observe and comply with all warning_, cmltions and

instructions placed on *,lie unit or described in the operating hibmlctions

or service nlanuM.

WARNING

To guard ,gainst injury, the following b_sic sMEty precautions should be

observed in the installation, use and selwicing of the unit.

Use

Power Sources

This unit should be operated only licom the type o] power source indicated on the infoml_tion label. Ifyou are not sul_ of the type of electricM power

supplied to your honle, consult your deMer or

[ocM power COillpany.

Grounding or Polarization

This unit is eqLdpped with a pohudzetl AC power cord plug (a plug having one blade wider than the otheri, or wifll a tluee-wile grounding type plug (a plug having a third pin tbr grounding), Follow the

instructions below:

For the unit with a three-wire grounding type AC power cord plug (Class I unit)

This unit 11rlLIStbe connected to ml AC power socket

outlet with a protective earthing connection,

For the unit with a polarized AC power cord plug

This plug will tit into tile power outlet ollly one way.

This is a s_iikty feature. If you m'e unable to insert c2_/,__j tile plug fitlly into the outlet, try reversing the plug.

Iftile plug still [idls*o fit. contact your electrician to have a sui_,ble [] Do not put anything heavy on tile AC power cord. Dc no_ pull tile Dutletinstallec DonotdetbatthesaieTypurposeofthepolarizedplugby AC power cord forcing it in, [] Keep tile AC power cord away [i'oln heal som_es.

Wall outlet lflhe AC power cord is damaged, stt p using it _md ask your dealer or

Do not u_ a poor fitting outleL _ Sony service center to exchange ir hlscrt the plug fully into lhe outlet. Ifitisloose. it _1 ' z> Batteries

nlay ca//se arcing .nd result in fire. q_

Contact y............. tan to have tile .)utler II _ \\ Do not short circuit, di........ bl........ heat tile batteries.

changed

][ _ _.' _ Do not dispose of b.tteries ill *,tim.

II 7,, \\

t_N_.___ > Disposal of used batteries

Wiring _-- Ventilation holes

For yous s;itety unpluc, tile AC? power cold'" when wnnli"" cable'_s, , _ _/_/--_1_

' _ _ Never push objects of any kind into tile unit through _

,.'_ _ Topreserveourenvironmengdispos_ofuscdbatteriesaccordingtoyour,

_'N local laws or regulations.

E ectr c shock _ the cabinet slots as they may touch dangerous ¢_"'•I ,-

Do not touch tl_e AC power cordoriheunltwltha . g_ _°5_ ) J afireorelectricshock.Neverspillliquidofanykind I U . - 'Jl wet and lfyou _lu,Uul)_,tleACpowerco'd '0/ 5')- _@TY ontheunit I L J :2_

h'omme unit will, awet llaila_ it nlay ........ lectric N_ _"_ IL__

shock, b_ -_-_ j Objects and Liquid Entry

Cle_nin. _,_ [[ {"J& Donotpl ........ y objects on the unit. __

V" Clean the AC power plug regularly, o, splashing and no objects filled with liquids, such \__ _ :; -.'_

If tile plug is covered witli dust and it picks _I _/, as vases, shall be placed on the apparatus, e-_f J

upinoismre, itsinsulatl ....... ydeteriorate _]['a _7_ _I

mid result in fire. Unplug tile AC pt wer _<_2/I {'_"._. LL..._ plug and cleat, it regulariy, tt ") \ _'_'_" )/) >-ZL_

/ _, voltage points or sholl out pro% tllat could result ill

[[ _-_ " The apparatus shall not be exposed to drippil .... _. %,

[] Cleml the cabinet of the unit with a dr3

soft cloth. To mlno_ e dust from the screen, wipe it gentl 3 with a

- li cloth. Stubborn stains ma 3 be r_moved with a cloth slight b dmnpened with a solution ofndld soap and warm water. Nm er use

Sll_ng solvents such as tllinner or benzine tor cleaning.

[] If using a chemicMly pretreated cloth, please lPllow tile

instruction provided on tile package.

[] If tile picture becomes dark after using tile unit for a long period

of lime. it may be necessm'y to clean tile inside of the unit. Consult qualified service personnel

Overloading

Do not overlood wall Otltlets extension cords or _ ' Q"

convenience receptacles beyond tlleir capacity,

since this Call res/llt 111tire or electric shock.

Power

Alw_ys tunl tile unit off when it is not being u_d,

Wile tile unit is let_ Lmattendedand lumsed for

long periods of time. unplug it ti'om tile wan outlel ,,_ o )recamion *_gainst the possibilit 3 oI an

internal mMfunctlon that could clvate a file

h_lzard,

Sound

ff a snapl)ing or popping sound i}conl tile unit is continuous or Ii'equent while tile unit is operating,

unplug the unit and consuh your dealer or seiwice

technician. It is normal for unit's to make

occasional snapping or popping sounds. particuhu'ly when b_ing turned on or off

AC Power Cord

If you damage tile AC powes cord, it may result ill tire or electric shock

[] Do not pinch, bend. o_twist the cord excessively. The coiv lines

may be bared and cut. and cause short-circuit, resulting in tim ol electric shock.

[] Do not convert or damage tile AC F _wer cord

[] Be sum to grasp tile plug when disconnecting tile AC power cord

Continued

Attachments

Medical institution

Do 11ol ph/ce this unit m _ place where nlcdicai

It lllay cause nlallLlnction oi medic111 instr//lllellrS equlpnlent is in /ISe __%

Moisture and flammable objects

[] Do not use plugged sets near _ ......

water -- Ior exanlple. Ileal" a b11tlltLl_ r"_ _ _ '% washbowl, kitchen snlk, or hmndry tub, In f_£_S:'

11wet bil._enlent_ or near a swinml[ng pool,

etc•it.lily res,atinfi..... lectricsho0k•_7%%_

[] Do not let this unit get wet. Never spill

liquid of any kind on tile unit. If rely liquid or solid object does tM1 through, do not operate the unit• It may result in electric shock or damage to the unit. Have it checked inlmediately by qualified personnel. _-

[] To prevent fire. keep flllmmable obiecrsor open flame e.g.

candles away t?om the unit

Accessories

Do not place tile/init on an unstable cllfi, stllnd, table or shelf• Tile unit may fall, causing serious injury to a

child ot an adult mid serious damage to the unit. No part otthe tlllit should overhang rely edge of the unit cart or smncu rely overhanging edgeis a sathly hazard.

An appliance and cart combination should be moved with care. Quick stops, excessive [orce and uneven

suri_ces may cause the appliance and cart con/bin_/tion to overttlrn.

Broken pieces

Do not throw 11nything at lilt unit, The screen glass may break by the inlpact ilnd cause serious iniury.

Cable wiring

Take care not tO catch yoLlr feet on tile cables. It nlay damage tile unit.

Heat

Do llot to/Ich the surface of tile unit it relllains hot even for some time aIter tile Illlit is turned off.

Volume adjustment

[] Adjust file volume _ as not to trouble your nelghb< rs. Sound

c11rries very easily at night time. TlleretPre. closing the windo,a - or ubnlg headphones is suggested.

[] When using headphones, adjust tile volume so as to avoid

excessive levels, as hellring dalllagc may restllt

Disposal of the unit

[] Do not dispose tile unit with general househohl wasm. [] The LCD contaills a Slll_lll anlount L[ liquid cwst111. Tile

lluorescellt tube used in this display contains mercury. Follow your local ordinances mid regulations for disposal•

Handling of broken glass and liquid crystal leakage

If tile LeD panel gets dalnaged, crystalline liquid leakage nlay ( cc/ir, or scattered broken gh,ss may result• Do not touch broken glLIsb Oi

crystalline liquid (which is toxic with bmx: hands as cuts or poiaomng skin irritation nlay occur. Also. do not let glass lragmenrs or leaked

_rystalline liquid get into your eyes or lllotltll. Should either contact yo/tr

e es or lllO/llll, rinse tile conlacred area thoroughly with water ant consl.dt your doctor.

LeD screen

[] Ahhough tile LeD screen is nlade with high-l)recision technology

and llus eflhctive pixel s of 99.99% or more blllck d ois may appear or bright points of light (red blue or green) nlay appear constantly on the LeD screen• This is a smlctura] property ot the LeD pmlel

and is not a malfunction.

[] Do not expose the LCD screen surface to the direct sun light

Doing so may danl_/ge tile screen surf_/ce.

[] Do not push or scratch tile LCD screen, or place objects on top ot

the unit. Tile image may be uneven or tile LCD panel In y be danlaged•

[] if tile unit is used in a cold place, a snle*,r may occur in tile plcnlre

or the picture may become dark, This does not indicate a thilure These phenonlena improve _ls the tenlperaiure rims.

[] Ghosting may occur when still pictures ;rre displayed

conrinllO/isiy, it lll0y disappear airer a Iew IllOlll¢ll[S.

[] The screen and cabinet get warm when the unit is in use. This lb

no111 nlalfilllctioll

[] Avoid spraying UlS_Ct repellent with volatile material to the

scwen.

[] A_ old prolonged conK/ct with rubber or plastic made materiah

Fluorescent lamp

This/init uses 11special fluorescent lamp as its ligilr source If the screen

h*,s run down and should be replaced. For replacement, consult qualified service personneh

• flickers, or does not appear, the fluorescent lanlp

Installation

[] Wllen inMall {ng or renloving tile ullii

on tile w*dh be sure to use qualified contructors. Wall mount installation

requires tile use of a wall-nlO//ll[ bracket, lfthe unit is inst_dled or

removed fi'om tile _vall by a person other thml a qualified contractor, tile

uniT ma 3 fall and cause serious injul L if the unit is not installed _curely.

[] To prevent injury, this appararus

nlust be securely attached to the stand/wall in accordance with the installation instructions•

[] Carrying the unit requires two or

more people.

Placement for viewing

It is reconmlended to wutcll tile unit a a distanc_ ot 3 to 7 times that ot the scwen heighT, and in nloderate brightness. Watching the unit for to< long or in a dark room will cause eye tYtigue.

Optional accessories

Obsmwe tile following when installing tile unit using =

wall-nlcmnt bracket. If the unit is not secured propelly, it may fhll and cause injury. _'_ i]

U Be sure to follow tile operating instructions I i I J ]

supplied with tile wall-mount bracket when I] installing tile unit

V- Be sure to attach the brackets supplied with tile

u all-mollnt bracket.

Protruding location

Do not insl_dl tile unit ill protruding locations, lfyou install tile unit in tile following locations, injury nlay result.

V- Do not install tile unit id a location where tile unit protrudes= sucll

as pillars.

r- Do not install tile unit in a location that may cause injury.

Oils

Do not install this unit in re_, aurants where oily vapors occur. Dust absorbing oil ma 3 enter into the unit ;tnd dalllage the unit.

Corrosion

Use of this unit near die seashore may subject tile set to excessive salt.

corrosion m_d intern;fl danlag_ mid result in deterioration ot tile unit's

perf_lrnlance. If the _t will be subjected to these conditions_ steps should be taken to reduce the humidity and temperature of the area where tile Ullif is located.

Ventilation

Yhe slots and openings in tile unit m'e prt aided tot necessary ventilation 1"o ensure reliable operation of tll_ unit. and to protect it frolll

uverheating, tllese slots and openlllgS tlltlst never be blocked or covered. Unless proper ventilation is provided, tile/init may _ / / d

gatller dust and g_t dirty. For proper ventilation, f:-_>:',_

observe me following: _1

I-1 Do not inst dl tile unit t........ backward or ] ] 11

sideways. I L._j

I-1 Do not install the unit turned over or upside

dowll.

[] Never cover the slots and openings with a _ ¢

cloth )r other materials. '4-._

[] Leave sonic space aroulld the/init. Otherwise. adequate

air-circulation may be blocked causing overheating and cruise fire or damage the unit.

When installing the unit on the wall allow this much space,

4 [ncneg 4 mcne_

loon _ ]

When installing the unit using a stand, allow this much space.

s0 cm

I 117/8 ir/oh6_

itloom 14 Inches)

......" 7_£_i_6_?};.................

lOcrl lucre ',15c

4inches £¢ Ench :,_hes

Never install the unit as follows:

Air circulation is blocked. Air circulation is _cocked.

[] Never block the ,lots and openings b,

9laclng tile unit on a bet. aoIa_ rug or

other dmilnr surface.

E Never place tile unit in a confined space, such

a_ a bookcase or b/rill-in cabinet ttllless proper _ antilation is providec

Outdoor use

Do not hlstal] this unit out]oors. If'tile unit is exposed

____ to rain. it nlm resuh ill fire or elecn'ic dlock. If tile unit

___ _\vq.2 Vehicle and ceiling

_11:---1_ ceiling. _i;_i_- _-

_-----'_._ Bunpin_,oftl eveh c e nay causerheu_ ttofa dew1 [_'

Ls exposed to direct sunlight, the unit may he_,t up and

cause dmnage 1o the//nit.

Do not i 1stall this unit in a vehicle or hang fi'om tile ....

ini/Iry.

m3d cause '_ -'4b,3_ _;_

Ship and vessel

Do not install tills unit ill a shi I or vessel. If the Llnit is

exl]osed to seawater, IT may cause tire or dmnage the , , i

Preventing the unit from toppling over

Take nleasLlres to prevent tile unit JZl'onl toppling over and causing illj ur 3 Tc prevent tile unit ti'om tq ppling over. ;ecure file unit tc tile wall or pillar.

Continued)

Installing on a level surface

If you in_ta]l the unit oil a non-l_vel surfhce_ tim unit ulay fall or drop alld cause injury or dallloge.

____. opening the cabinet may expose you to danger ....

_//_ voltages or omer hazards. Ret)r all servicing to

_ qualified service I_ersonnel.

Placing on a stable surface

If you plac_ tim unit on an uiistable surface. Tile umT tnay Iall and c_/use illlury or dalnage.

Fall

Do not tlang atlything on the unit. Tim unit may M1 from the stand or wMl-mount brackeL causing dalnage or serious injmT.

AC power cord

Unplug tile AC l" _wer cord when moving the unit. Do not move the unit with the AC power cord plugged in. It lnay damage the AC power cord and

result in tire or electric shock. Do not allo,a anything to lest on or roll over the

power cord. and do not ph_ce the unit whel_ the power cord is subject to weber or abtlse

Lightning

For added protection for this unit during a liglltning srorin, or when it is left unattended and unused fhr long periods of time. unplug it from tile

wall outlet. This will prevent damage to the unit due to lightning and power-line surges.

Service

Damage requiring service

Unphlg the unit If'ore the wall outlet mid refer servicing ro quMified

service personnel under the following conditions:

[] When the power cord or plug is

damaged or Dayed.

I Do not attempt to service tile ilnit yourself since

Replacement parts

Servicing

When replacement pmls are l_quirech be sul_ the service t_chnician certifies in wririllg tllat helslle has

used replacement parts specified b} the manufacturer

lat have the same characteristics as the originM parts.

Unauthorized substitutions lna3 result in tire. electric

shock or other hazards ....

Safety check

Upou completion of any service or t'epair s to the unit_ ask tile service technician to perform routine sa f_ry

check_, as specified by the manufi_ctmvr t m

determine fllat tile unit is in sal_ operating comlition.

and to so certify. Ask a qualified service technician to

dispose of file unit.

[] If liquid has been spilled into tile unit.

V If tile surface of tile unit cracks, do not touch it, unplug tile AC

power cord.

[] If tile unit has been exposed to rain or

V- If the unit has been subjected to excessive

shock by being dropped, c been damaged

V- If tile unit doe:

tbllowing the operating

rely those controls that are specified in the

operating

other controls may result in damage and will

oiren rcq,lire extensive work by a qualified teclnlician to reslore the tltlit to norlllal

[] When the unit exhibits a distinct chm_ge in

3erfc_l'lllilnce. it indicates need for service.

operation.

Welcome .............................................................. 10

Package Contents .......................................... 10

Features ......................................................... 10

Installing the Unit ................................................ 11

Preventing the Unit from Toppling Over ......... 11

Bundling the Connecting Cables .................... 12

Unit Controls and Connectors ........................... 13

Front, Top and Side Panel ............................. 13

Rear Panel ..................................................... 15

Bottom Panel ................................................. 16

Making Video and Audio Connections ........... 17

Satellite Receiver ................................................ 18

VCR and Cable .................................................... 19

HD Equipment ..................................................... 20

DVD Player .......................................................... 22

HDMI-Equipped Device ...................................... 24

DVI-HDTV-Equipped Device ............................... 25

Personal Computer ............................................. 26

Camcorder or Video Game Equipment ............. 27

Using the Setup Settings .................................... 40

Selecting Setup Options ................................. 40

Troubleshooting .................................................. 42

Contacting Sony .................................................. 43

Specifications ...................................................... 44

Index ..................................................................... 45

Button Descriptions ........................................... 28

Special Buttons on the Remote Control ........... 29

Using the Wide Screen Mode ........................ 29

Using the Freeze Function ............................. 30

Using the Power Saving Function .................. 30

Using the Sleep Function ............................... 31

Overview of the Settings .................................... 32

Using the Picture Settings ................................. 33

Selecting Picture Options ............................... 33

Selecting PC Picture Options ......................... 34

Using the Sound Settings .................................. 35

Selecting Sound Options ............................... 35

Using the Screen Settings ................................. 36

Selecting Screen Options .............................. 36

Selecting PC Screen Options ........................ 38

We ome

Thank you for purchasing this Sony HDTV Ready LCD unit. This manual is for models KLV-32U 100M and KLV-40U 100M.

Package Contents

Features

Along with your new unit, the packaging box contains a remote control, size AA batteries.

See page 44 for the complete list of supplied accessories.

Some of the features that you will enjoy with your new unit include:

[] Wide Screen Mode: Watch conventional 4:3 aspect ratio broadcasts in

wide screen (16:9) mode.

[] CineMotion®: Using the reverse 3-2 pull down technology, the

CineMotion feature provides smoother picture movement when playing back movies or other video sources on film.

[] Component Video Input: Offers the best video quality for DVD (480p

and 480i), and digital set-top box (1080i, 720p, 480p and 480i) connections.

[] HDMI (High-Definition Multimedia Interface): Provides an

uncompressed, all-digital audio/video interface between this unit and any HDMI-equipped audio/video component, such as a set-top box, DVD player, and A/V receiver. HDMI supports enhanced, or high- definition video, plus two-channel digital audio.

[] PC Input: PC Input allows you to connect your PC and display the PC

screen on your unit.

Installing the Unit

Introducing the Unit

Preventing the Unit from Toppling Over

Attaching the Support Belt

1 Screw the support belt (supplied) to the unit stand with a wood screw

(supplied).

2 Attach the support belt to the stand, and screw the belt with a securing

screw (supplied) using a coin, etc.

3 Adjust the length by pulling the support belt towards you while holding

the unit stand.

/_ Be sure to take measures t° prevent the unit from toppling over and

:__,_DePending on the materia! used for the stand you chos e fo[ this unit, the

supplied wood screw may not be suitable. Consult your dealer about the

type of screw you can use for this unit and you[ stand, You wi!l need

screws that are 3 to 4 mm (_/8to 3/16 inches) in diameter.

When Mounting on a Wall

See tile Instruction Guide supplied with tile wall-mount bracket on how to mount the unit on the wall.

Introducing the Unit

Bundling the Connecting Cables

You can bundle the connecting cables as illustrated below.

Unit Controls and Connectors

Front, Top and Side Panel

INPUT -- VOLUME

Introducing the Unit

[] MENU Press to display MENU. Press again to exit MENU. [] INPUT/_!_ Press repeatedly to cycle through the external equipment connected to the unit's inputs. Press

to select the menu options in the MENU screen.

[] ,I. * In the MENU screen, these buttons serve as left/right buttons. [] !1. tl. Press to adjust the vohnne.

- VOLUME + In the MENU screen, these buttons serve as up/down buttons.

[] POWER Press to turn on and off the nnit.

[] Headphones Connects to your headphones. If your headphones do not match the.jack, use a suitable plug

jack adaptor (not supplied). PIC OFFfrlMER When lit in green, indicates that the Picture Oft feature is activated. For details, seepage 41.

LED When lit in orange, indicates Sleep Timer is set.

_,.q The VOLUME _ button has a tactile dot, Use it asa reference when operating the

unit.

(Continued)

Introducing the Unit

[] STANDBY LED Lights np in red when in the standby mode %r PC inputs. [] POWER LED Lights up in green when the unit is turned on.

[] (IR) Infrared Receives IR signals l¥om the remote control.

Receiver

+ 32 hidden pages