Sony KDL-46R450A, KDL-40R450A Schematic
Self Diagnosis
HISTORY INFORMATION FOR THE FOLLOWING MANUAL:
REPAIR MANUAL
Supported model
RB1FK Chassis
Segment: BA
MODEL COMMANDER DESTINATION
KDL-40R450A RM-YD092 US/CND/LA/MX
KDL-46R450A RM-YD092 CND/LA/MX
Version Date Subject
1.0 01/28/2013 Original Manual Release Date.
KDL-40R450A
LCD Digital Color TV
9-883-499-01
TABLE OF CONTENTS
Cautions and Warnings ...................................................................................ii
Section 1 - Specications and Layouts ......................................................... 1
Specications ................................................................................................1
Board Layout .................................................................................................2
KDL-40R450A ...........................................................................................2
KDL-46R450A ...........................................................................................2
Wire Dressing ................................................................................................ 3
KDL-40R450A ...........................................................................................3
KDL-46R450A ...........................................................................................3
Section 2 - Troubleshooting ...........................................................................4
Diagnosing the Error .....................................................................................4
Viewing the Self Check Diagnosis History ................................................ 4
Triage Chart ...................................................................................................5
Flowcharts and Diagrams .............................................................................. 6
Overall Block Diagram .............................................................................. 6
Power and Control Block Diagram ............................................................ 7
No Power Flowchart .................................................................................8
Standby LED Blinking Flowchart ..............................................................9
No Video Flowchart ................................................................................10
Video Distorsion Flowchart ..................................................................... 11
Section 4 - Exploded View/Part Number Information ................................. 20
KDL-40R450A/46R450A .............................................................................20
Connectors ..................................................................................................21
KDL-40R450A .........................................................................................21
KDL-46R450A .........................................................................................21
Screws ......................................................................................................... 22
Section 5 - Accesories Part Number Information .......................................23
Accessories and Packaging ........................................................................23
Miscellaneous .............................................................................................. 23
Optional Accessories ...................................................................................23
Remote Commander ...................................................................................23
Appendix A: Encryption Key Components ...............................................A-1
Section 3 - Repair Information ...................................................................... 12
Repairing the TV ..........................................................................................12
Removing the Table-Top Stand ............................................................... 12
Removing the Cover Under ....................................................................12
Replacing the Main Board ...........................................................................13
Replacing the Power Supply Board ............................................................. 18
Removing the Switch Unit ...........................................................................18
Removing the Bezel ....................................................................................19
KDL-40R450A/46R450A i
CAUTIONS AND WARNINGS
CAUTION!!
These servicing instructions are for use by qualied service personnel only.
To reduce the risk of electric shock, do not perform any servicing other than
that contained in the operating instructions unless you are qualied to do so.
WARNING!!
An isolation transformer should be used during any service to avoid possible
shock hazard, in case of live chassis.
!
SAFETY-RELATED COMPONENT WARNING!!
There are critical components used in LCD color TVs that are important for
safety. These components are identied with shading and
schematic diagrams and the parts list. It is essential that these critical parts
be replaced only with the part number specied in the parts list to prevent
electric shock, re or other hazard.
NOTE: Do not modify the original design without obtaining written permission
from the manufacturer or you will void the original parts and labor warranty.
!
mark on the
ATTENTION!!
For safety reasons, component level repair of the Power Supply Boards
and/or the Inverter Boards is prohibited.
ATTENTION!!
Ces instructions de service sont à l’usage du personnel de service qualié
seulement. Pour prévenir le risque de choc électrique, ne pas faire l’entretien
autre que celui contenu dans le Mode d’emploi à moins que vous soyez
qualié faire ainsi.
ALERTE!!
An d’eviter tout risque d’electrocution provenant d’un chássis sous tension,
un transformateur d’isolement doit etre utilisé lors de tout dépannage.
!
ATTENTION AUX COMPOSANTS
RELATIFS A LA SECURITE!!
Les composants identies par une trame et par une marque
schemas de principe, les vues explosees et les listes de pieces sont d’une
importance critique pour la securite du fonctionnement. Ne les remplacer
que par des composants Sony dont le numero de piece est indique dans le
present manuel ou dans des supplements publies par Sony. Les reglages
de circuit dont l’importance est critique pour la securite du fonctionnement
sont identies dans le present manuel. Suivre ces procedures lors de
chaque remplacement de composants critiques, ou lorsqu’un mauvais
fonctionnement suspecte.
!
sur les
ATTENTION!!
Pour des raisons de sécurité, Interdire de réparer ou remplacer les
composantes dans les blocs d’alimentation et/ou sur les modules d’inverseur.
KDL-40R450A/46R450A ii
CAUTIONS AND WARNINGS
To Exposed Metal
Parts on Set
0.15 µF
Earth Ground
AC
Voltmete
r
(0.75V)
Trouble Light
SAFETY CHECK-OUT
After correcting the original service problem, perform the following safety
checks before releasing the set to the customer:
1. Check the area of your repair for unsoldered or poorly soldered
connections. Check the entire board surface for solder splashes
and bridges.
2. Check the interboard wiring to ensure that no wires are “pinched” or
touching high-wattage resistors.
3. Check that all control knobs, shields, covers, ground straps and
mounting hardware have been replaced. Be absolutely certain that
you have replaced all the insulators.
4. Look for unauthorized replacement parts, particularly transistors,
that were installed during a previous repair. Point them out to the
customer and recommend their replacement.
5. Look for parts which, though functioning, show obvious signs of
deterioration. Point them out to the customer and recommend their
replacement.
6. Check the line cords for cracks and abrasion. Recommend the
replacement of any such line cord to the customer.
7. Check the antenna terminals, metal trim, “metallized” knobs, screws
and all other exposed metal parts for AC leakage. Check leakage
as described in “Leakage Test”.
The AC leakage from any exposed metal part to earth ground and from all
exposed metal parts to any exposed metal part having a return to chassis,
must not exceed 0.5 mA (500 microamperes). Leakage current can be
measured by any one of three methods.
1. A commercial leakage tester.
Follow the manufacturers’ instructions provided with the tester.
2. A battery-operated AC milliammeter.
LEAKAGE TEST
3. Measuring the voltage drop across a resistor by means of a VOM
or battery-operated AC voltmeter. The “limit” indication is 0.75 V, so
analog meters must have an accurate low voltage scale. Nearly all
battery-operated digital multimeters that have a 2 VAC range are
suitable. (see Figure A)
Figure A. Use an AC voltmeter to check AC leakage.
HOW TO FIND A GOOD EARTH GROUND
The cover-plate retaining screw on most AC outlet boxes is at earth ground.
Verify the AC outlet box retaining screw ground by connecting a 60W to
100W incandescent (not a neon or uorescent lamp) between the hot side of
the receptacle and the retaining screw. Try both slots, if necessary, to locate
the hot side on the line; the lamp should light at normal brilliance if the screw
is at ground potential. (see Figure B)
AC Outlet Box
Figure B. Checking for earth ground.
KDL-40R450A/46R450A iii
System
Television system
ATSC (8VSB terrestrial): ATSC Compliant 8VSB
QAM on cable: ANSI/SCTE 07 2000 (Does not include CableCARD functionality)
Channel coverage
Analog Cable: 1 - 135 / Digital Cable: 1 - 135
Panel system
Speaker output
Input/Output jacks
CABLE/ANTENNA
VIDEO: 1 Vp-p, 75 ohms unbalanced, sync negativeVIDEO IN
AUDIO: 500 mVrms (Typical) / Impedance: 47 kilohms
COMPONENT IN
YPBPR
(Component Video): Y: 1.0 Vp-p, 75 ohms unbalanced, sync negative / P
B
: 0.7 Vp-p, 75 ohms
P
R
: 0.7 Vp-p, 75 ohms / Signal format: 480i, 480p, 720p, 1080i, 1080p
AUDIO: 500 mVrms (Typical) / Impedance: 47 kilohms
HDMI IN 1(ARC)
HDMI IN 2/MHL
HDMI: Video: 480i, 480p, 720p, 1080i, 1080p, 1080/24p
MHL: Video: 480i, 480p, 720p, 720/30p, 1080i, 1080/30p, 1080/24p
Audio: Two channel linear PCM 32, 44.1 and 48 kHz, 16, 20 and 24bits, Dolby Digital
PC Input
AUDIO OUT
DIGITAL AUDIO OUT
(OPTICAL)
PCM/Dolby Digital Optical Signal
Photo, Music and VideoUSB
NTSC: American TV Standard
Analog Terrestrial: 2 - 69 / Digital Terrestrial: 2 - 69
LCD (Liquid Crystal Display) Panel, LED Backlight
8 W + 8 W
75-ohm external term inal for RF inputs
500 mVrms (typical)
SECTION 1 - SPECIFICATIONS AND LAYOUTS
•O
•D
*D
SPECIFICATIONS
KDL-40R450A/46R450A 1
Model name KDL-46R450A KDL-40R450A
Power and others
Power requirement
Power consumption
in use
in standby
Screen size*
(measured diagonally)
Display resolution
Speaker/Full range (2)
Dimensions* with stand
without stand (mm)
wall-mount hole pattern
wall-mount screw size
Mass*
without stand
Supplied accessories
Optional accessories
(inches)
(cm)
(mm)
(inches)
(mm)
(inches)
(inches)
(mm)
(mm)
(kg)with stand
(lb)
(kg)
(lb)
Quick Setup Guide (1) / Warranty Card (1) / Safety and Regulatory Booklet (1) / Software License (1)
110-240 V AC, 50/60 Hz (USA/Canada/M exico 120 V AC, 60 Hz)
89 W 109 W
Less than 0.2 W with 120 VAC and less than 0.3 W with 240 VAC
46 40
101,6116,8
1,920 dots (horizontal) × 1,080 lines (vertical)
1053 × 641 × 181
1
1
1
× 25
× 7
/
/
41
2
1053 × 622 × 76
1
41
/2 × 24 1/2 × 3
M6 (8~12 mm)
Remote control RM-YD092 (1) / Size AAA batteries (2) / Operating Instructions (1)
Stand installation guide (1) / Table-Top Stand (1 set) / Screws (4) (KDL-46R450A)
Screws (2) (KDL-40R450A) / Attachment Parts (2) (KDL-46R450A only)
/
4
4
9.4
20.8
9.1
20.1
Connecting Cables / Support Belt Kit
40 × 100
5
(1
/8 × 4)
923 × 567 × 181
3
3
/
8
x 22
/8 x 7
36
923 × 548 × 76
3
5
8
x 21
36
M4 (6.5~10 mm)
7.4
16.3
7.1
15.7
/8 x 3 /
ptional accessories availability depends on its stock.
esign and specications are subject to change without notice.
imensions and mass are approximate values.
1
/
4
001 × 002003 × 003
BOARD LAYOUT
SWITCH
UNIT
TCON
H BOARD
MAIN BOARD
(A BOARD)
POWER SUPPLY
BOARD (GL4)
SWITCH
UNIT
TCON
H BOARD
MAIN BOARD
(A BOARD)
POWER SUPPLY
BOARD (GL5)
SECTION 1 - SPECIFICATIONS AND LAYOUTS
KDL-40R450A
KDL-46R450A
KDL-40R450A/46R450A 2
WIRE DRESSING
SECTION 1 - SPECIFICATIONS AND LAYOUTS
KDL-40R450A
KDL-46R450A
KDL-40R450A/46R450A 3
SECTION 2 - TROUBLESHOOTING
Self Diagnosis
K
Supported model
DIAGNOSING THE ERROR
Before servicing the Television:
1. Verify the TV has the symptom the customer indicated.
2. Check to see if the latest Software is installed.
a. If not, install the latest version.
3. Determine the replacement part required.
VIEWING THE SELF CHECK DIAGNOSIS HISTORY
When an error is detected, the Self Check screen records the number of
times the error occurred. This is helpful in conrming past occurrences of
an error and for determining if an error is intermittent when the customer is
not sure what is causing the television to shut down. If the screen displays
a “0”, no error has occurred.
DISPLAY
POWER
to turn on the TV and then turn it off again.
Channel 5 Volume -
POWER
1. Press
2. Press the following buttons on the Remote Commander within 1
second of each other:
NOTE: This differs from accessing Service Adjustments Mode (Volume +).
SELF CHEC
Back <<
002 MAIN_ POWER 001
003 DC_ALERT1 000
003 AUDIO_PROT
005 PANEL_ID_NVM_ERR
00116 00024 00115
[Home] Exit
SAMPLE SELF CHECK DIAGNOSIS PAGE
000
000
Indicates
an error
has occurred
000R_ERRECNALAB400
000RRE_NOCT500
Indicates
000TILKCAB600
000RRE_PMET700
no error
has occurred
KDL-40R450A/46R450A 4
SECTION 2 - TROUBLESHOOTING
1. Confirm the symptom from the customer.
RED Dot: (Primary) Most likely defective part.
2. Select that symptom from the chart.
BLUE Triangle: (Secondary) Possible defective part.
3. Bring the primary component listed for that symptom.
5. Chart Color Code.
Power Audio
2X 3X 5X 6X
Dead set
No
Video
Whole
Screen
Distortion
Isolated
Area
Distortion
No Audio
MAIN BOARD
▲ ▲
POWER SUPPLY
LCD PANEL
TCON
▲ ▲
Video
Protection Modes
4. Follow the associated flowcharts in the Training Manual to isolate the board.
Board
*NOTE: REFER TO LCD PANEL SERVICE MANUAL IN REFERENCE LIBRARY DATABASE
FOR CORRECT REPLACEMENT PARTS BASED ON SERIAL NUMBER.
TRIAGE CHART
Use this general Triage Chart to determine what may possibly be causing the error before going out to the customers location.
To access the most recent version of the Triage documents for the models listed in this manual, login into the Sony Authorized Servicer Portal at
http://www.sony.com/asp.
KDL-40R450A/46R450A 5
Loading...