The model and serial numbers are located at the rear of the TV.
Record these numbers in the spaces provided below. Refer to
them whenever you call upon your Sony dealer regarding this
TV.
Model Name
Serial No.
CAUTION
To prevent electric shock and blade exposure, do not use
this polarized A C plug with an extension cord , receptacle or
other outlet unless the blades can be fully inserted.
❑Operate the TV only on 120 V AC.
❑Avoid operating the TV at temperatures below 41°F
(5 °C).
Declaration of Conformity
Trade Name: SONY
Model: KDL-40S504/KDL-46S504
Responsible Party: Sony Electronics Inc.
Address: 16530 Via Esprillo,
San Diego, CA 92127 U.S.A.
Telephone Number: 858-942-2230
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired
operation.
For customers in Canada
This Class B digital apparatus complies with Canadian
ICES-003.
FCC Related Information
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one
or more of the following measures:
❑Reorient or relocate the receiving antenna.
❑Increase the separation between the equipment and
receiver.
❑Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
❑Consult the dealer or an experienced radio/TV
technician for help.
Pursuant to FCC regulations, you are cautioned that any
changes or modifications not expressly approved in this
manual could void your authority to operate this
equipment.
The shielded interface cable recommended in this manual
must be used with this equipment in order to comply with
the limits for a digital device pursuant to Subpart B of Part
15 of FCC Rules.
Note
This television includes a QAM demodulator which should
allow you to receive unscrambled digital cable television
programming via subscription service to a cable service
provider. Availability of digital cable television
programming in your area depends on the type of
programming and signal provided by your cable service
provider.
For Customers in the United States
The lamp in this product contains mercury.
Disposal of these materials may be regulated
due to environmental considerations. For
disposal or recycling information, please
contact your local authorities or the Electronic
Industries Alliance (www.eiae.org).
2
Compatible Wall Mount Bracket Information
Use the following Sony WALL-MOUNT BRACKET with
your TV model.
Sony TV Model No.
KDL-40S504/KDL-46S504
Sony
Wall-Mount
Bracket
SU-WL500
Model No.
Use with other WALL-MOUNT BRACKETS may cause
instability and could result in property damages or injury.
To Customers
Sufficient expertise is required for TV installations. Be
sure to subcontract the installation to a Sony dealer or
licensed contractor and pay adequate attention to safety
during the installation.
Licensing Information
Macintosh is a trademark of Apple Inc., registered in the
U.S. and other countries.
HDMI, the HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of HDMI
Licensing, LLC.
Fergason Patent Properties, LLC:
U.S. Patent No. 5,717,422
U.S. Patent No. 6,816,141
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
TruSurround XT, SRS and (z) symbol are trademarks of
SRS Labs, Inc. TruSu rround XT technology is incorpor ated
under license from SRS Labs, Inc.
Blu-ray Disc is a trademark.
“BRAVIA”, , BRAVIA Sync and are
trademarks or registered trademarks of Sony Corporation.
“PlayStation” is a registered trademark and “PS3” is a
trademark of Sony Computer Entertainment Inc.
®
Your BRAVIA TV is ENERGY STAR
qualified in the “Home” mode.
It meets strict energy efficiency guidelines
set by the U.S. Environmental Protection
Agency and Department of Energy.
ENERGY STAR is a joint program of these government
agencies, designed to promote energy efficient products
and practices.
sWhen the TV is initially set up, it is designed to meet
ENERGY STAR requirements.
sChanges to certain features, settings, and
functionalities of this TV (i.e. Picture/Sound, Light
Sensor, Power Savings) can slightly change the
power consumption.
Depending upon such changed settings, the power
consumption may incr ease which possibly could exceed the
limits required for the ENERGY STAR qualification.
United States
http://www.sony.com/tvsupport
Canada
http://www.sony.ca/support
On-line Registration
United States
http://productregistration.sony.com
Canada
http://www.SonyStyle.ca/registration
4
Introducing Your New BRAVIA
®
Introducing Your New BRAVIA®
Welcome to the World of BRAVIA
Thank you for purchasing this Sony
documentation listed below to get the most out of your TV.
Safety Booklet
Provides precautionary measures
to keep you and your TV safe. Read
this information prior to setting up
your TV.
Operating Instructions
Provides general TV operation
information that will allow you to
view your TV with minimal
customizations.
The TV operation information above has been designed in an eco-friendly
manner to reduce the consumption of natural resources.
BRAVIA
®
high-definition television. Use the
Quick Setup Guide
Provides TV setup information,
illustrates sample optional equipment
connection diagrams.
Reference Book
Offers the most complete TV
operation information available for
your TV and presents advanced
customization details. Access it at
www.sony.com/referencebook
Experiencing Stunning HD with Your BRAVIA
The quality of the image you see on your BRAVIA
signal it receives. To experience the stunning detail of your new
access to HD programming. Your
from:
BRAVIA
TV can receive and display HD programming
TV is only as good as the quality of the
BRAVIA
.
TV, you need
• Over-the-air broadcasting via HD-quality antenna
• HD cable subscription
• HD satellite subscription
• Blu-ray Disc™ player or other HD compatible external equipment
Contact your cable or satellite provider for information on upgrading to HD programming.
This manual is for 40 and 46 inch BRAVIA KDL-S504 series models with screen size measured diagonally.
5
The Four Steps to a Full HD Experience
Set, Sound, Source, and Setup
Along with your BRAVIA TV set, a complete HD system requires an HD sound system, a
source of HD programming and a proper connection setup. Refer to the Quick Setup
Guide, enclosed separately, for connecting other optional equipment.
16:9 (high-definition) source
Most HDTV signals use a wide screen aspect
ratio of 16:9. The 16:9 fills your BRAVIA
screen, maintaining a crisp, clear, vivid
picture.
4:3 (standard-definition) source
Most standard-definition signals use a boxy
4:3 aspect ratio. When a 4:3 image is
displayed on an HDTV, you will see black
bars on the sides. The picture quality may not
be as sharp as with HD sources.
TV Feature Highlights
Your new BRAVIA High Definition LCD TV will dazzle you with stunning 1080p image
quality but won’t confuse you with complicated operation. The following features have
been included to help you get started enjoying your new TV.
➢ BRAVIA Sync: Your BRAVIA TV communicates with other Sony equipment
supporting the Control for HDMI function (page 16).
➢ Favorites: Your favorite channels and inputs are at your fingertips for easy
access to programs and inputs (page 17).
➢ Auto Wide Mode: Set your TV to auto adjust the screen based on the signal
resolution (page 18).
➢ ECO Settings: This model includes a number of features designed to make
your new BRAVIA HDTV easier on your pocketbook and the environment.
Light Sensor - Detects the amount of light in your room and automatically
adjusts the brightness of the screen resulting in more comfortable viewing in
any light condition.
Backlight - This feature reduces power consumption by turning off the
backlight.
• Check more details on the online Reference Book at www.sony.com/referencebook.
6
Getting Started
Setting Up Your TV
Some TV models are packaged with a detached Table-Top Stand so you can mount it to a wall
right away. If you are not mounting the TV to a wall, you will need to attach the Table-Top Stand.
You will need a Phillips screwdriver and the supplied screws to complete the task. Look for the
instructions attached to the TV unit or read the instruction in the online Reference Book.
Be sure to consider the following while setting up your TV:
• Carry the TV with an adequate number of people; larger size TVs require two or more people.
• Correct hand placement while carrying the TV is very important for safety and to avoid
damages.
Getting Started
• Ensure your TV has adequate ventilation if it is installed against a wall or in an enclosed area.
• For best picture quality, do not expose the screen to direct illumination or sunlight.
• Avoid installing the TV in a room with reflective wall and floor materials.
• Avoid moving the TV from a cold area to a warm area. Sudden room temperature changes may
cause moisture condensation. This may cause the TV to show poor picture and/or poor color.
Should this occur, allow moisture to evaporate completely before powering the TV on.
• Read the Dos and Don’ts in the Safety Booklet for additional safety information.
• For details about the items listed above, see the online Reference Book.
• When cable connection is completed, be sure to secure the TV to a stable surface or mount it to a
wall. The designated Sony wall-mount bracket model name is available on page 3. For details on
securing the TV, see page 11.
7
Locating Inputs and Outputs
Rear Panel
VIDEO IN
VIDEO
L
AUDI O
R
1 2
COMPONENT IN
(1080p/1080i/720p/480p/480i)
2
1
Y
P
B
P
R
AUDIO OUT
AUDIO OUT
3
SERVICE
1
(OPTICAL)
DIGITAL
AUDIO
AUDI O
(FIX)
45
6
IN
L
R
CABLE/ANTENNA
7
ItemDescription
1 SERVICEThis port is to be used when service is required.
2 VIDEO IN 1/
COMPONENT
IN 1 (1080p/
1080i/720p/
480p/480i)/
L-AUDIO-R
This input port can be used as composite video input (VIDEO 1) or as component
video input (COMPONENT 1). For composite use, connect the yellow jack to
Y/Video for video and use audio L and R for audio signal. For component
connection, use Y, P
, PR for video signals and also connect the audio L and R for
B
audio signal.
You must configure the input
type if the input is used as
composite or component
video input. Otherwise a black
& white or distorted picture
may occur.
To configure the input type,
press MENU, select Channel
menu then select
Video/Component 1 to
choose Video 1 or Component 1 as shown
here.
Component 1
Picture
Sound
Screen
Channel
Lock
Setup
Channels & Inputs
Video/Component 1
Cable/Antenna Cable
Add Digital Channels
Auto Program
Manage Channels
Manage Inputs
Video/Component 1 Component 1
Control for HDMI On
Device List
Device Auto Power Off Off
TV Auto Power On Off
Signal Diagnostics
Side Panel
PC IN
RGB
AUDIO
2
IN
3
IN
S VIDEO
VIDEO
L
(MONO)
AUDIO
R
2
VIDEO IN
VCR
8
5
9
Video 1
Component 1
ChangeBackRETURNMENU Exit
8
ItemDescription
3 COMPONENT
IN 2
4 AUDIO OUT
(FIX)
5 HDMI IN 1/2/3HDMI (High-Definition Multimedia Interface) provides an uncompressed, all-
6 DIGITAL AUDIO
OUT (OPTICAL)
7 CABLE/
ANTENNA
8 PC IN
(RGB/AUDIO)
9 VIDEO IN 2
S VIDEO
VIDEO/
L (MONO)AUDIO-R
Component video provides better picture quality than the S Video and composite
video. The COMPONENT IN 2 and COMPONENT IN 1 both accommodate for
video formats of 1080p, 1080i, 720p, 480p, and 480i as labeled.
Audio connection is required for the COMPONENT IN ports, connect audio (L/R).
Connects to the left and right audio input jacks of your audio equipment. You can
use these outputs to listen to your TV’s audio through your stereo system.
digital audio/video interface between this TV and any HDMI-equipped audio/video
equipment, such as a set-top box, DVD player, Blu-ray Disc, and A/V receiver.
HDMI supports enhanced, or high-definition video, plus digital audio.
Be sure to use only an HDMI cable that bears the HDMI logo.
If the equipment has a DVI jack and not an HDMI jack, connect the DVI jack to any
HDMI IN (with DVI-to-HDMI cable or adapter) jack, and connect the audio jack to
the AUDIO IN (L/R) jacks below the HDMI IN 1.
Connects to the optical audio input of a digital audio equipment that is PCM optical
compatible.
RF input that connects to your Cable or over-the-air antenna.
Connects to a personal computer’s video and audio output connector. Can also be
connected to other analog RGB equipment.
For some Apple Macintosh computers, it may be necessary to use an adapter (not
supplied). If an adapter is used, connect the adapter to the computer before
connecting the HD15-HD15 cable.
You may need to adjust the TV settings or your PC’s resolution and timing, see page
19 to setup your PC to this TV.
Connects to the composite video and audio output jacks on your A/V equipment
such as a DVD player or other video equipment. VIDEO IN 2 input is located on the
left side panel of the TV.
Connects to the S VIDEO output jack of your DVD or other video equipment that
has S VIDEO which provides better picture quality than composite video. The S
VIDEO does not provide sound; you will need to connect the audio cables.
Getting Started
Be sure to refer to the Quick Setup Guide for:
• High quality picture performances
• Combination of equipment connections
• Cable types to use for connection
To view 480p, 720p, 1080i, and 1080p formats, an HDMI or Component video (YP
necessary. Connect your equipment properly and playback the video with capable equipment. This
TV displays all picture format types in a resolution of 1,920 dots × 1,080 lines.
BPR
) is
9
Connecting Other Equipment
Blu-ray
Disc Player/
“PS3”
Rear of TV
VIDEO IN
VIDEO
Y
P
B
P
R
L
AUDI O
R
1 2
COMPONENT IN
(1080p/1080i/720p/480p/480i)
DVD
player
DIGITAL
AUDIO OUT
AUDI O
AUDIO OUT
(FIX)
1
(OPTICAL)
Digital
satellite
receiver
SERVICE
IN
L
AUDIO
R
Digital
cable box
Audio
system
CABLE/ANTENNA
Personal
computer
Side panel
PC IN
RGB
AUDIO
2
IN
3
IN
S VIDEO
VIDEO
L
(MONO)
AUDIO
R
2
VIDEO IN
CABLE/ANTENNA
Digital
recorder/
DVD/Game
system
Analog audio
equipment
(A/V Receiver/
Home Theater)
Analog
audio
equipment
(DVI only)
Digital audio
equipment
VCR/
Game system/
Camcorder
~
• Refer to the Quick Setup Guide (supplied) when connecting other equipment to your TV.
10
Bundling the Connecting Cables
You can bundle the connecting cables with the supplied cable band as illustrated below.
Do not bundle the AC power cord with other connecting cables.
Securing the TV
Sony strongly recommends taking measures to prevent the TV from toppling over. Unsecured TVs
may topple and result in property damage, serious bodily injury or even death. Contact Sony
Customer Support to purchase the optional Support Belt Kit by providing your TV model name.
• For United States call: 1-800-488-7669 or visit: www.sony.com/accessories
• For Canada call: 1-877-899-7669
Detailed information available on online Reference Book
Secure the Stand for the TV
Angle
braces
Anchor the TV to the Wall
Anchor bolts
Getting Started
Stand
Secure the TV to the Stand
M4 x 20
machine
screw
Screw hole on the
Table-Top Stand
Screw
Wallmount
holes
Rope or
chain
Wallanchor
11
Inserting Batteries into the Remote Control
Insert two size AA batteries (supplied) by
matching e and E on the batteries to the
diagram inside the battery compartment of
the remote control.
Push to
open
Initial Setup
The Initial Setup screen appears when you turn on the TV for the first time.
During this initial setup, you can perform the following:
1Select the language for the on-screen display text.
2Select HOME or Retail mode.
Initial Setup
Please select your language:
3Connect cable or antenna, then select OK to run Auto
Program.
~
• If you have cable and antenna available, please connect
cable first.
•IMPORTANT:
If you cancel
Auto Program
Auto Program
process is only effective when cable or antenna is connected.
before completion some channels may not be available.
4Auto Program will scan for available channels from the signal source directly connected to
the TV’s CABLE/ANTENNA input and may take sometime to complete the process. Follow
the help text provided on the screen to run Auto Program.
Set
• When prompted to select HOME or Retail, be sure to select
HOME for ENERGY STAR compliant mode.
• If you use both cable without a box and antenna connections, use an
A-B RF switch (not supplied). For more details, see the online
Reference Book.
• Select your preferred aspect ratio for the screen display. Press
WIDE to select the wide mode or press MENU and set the Auto
Wide to On under the Screen menu.
• To change the clock, press MENU and go to Setup menu then
select Clock/Timers and adjust Current Time.
12
Initial Setup
Please select the type of use for this TV.
“Home” optimizes the picture for normal home use.
“Retail” optimizes the picture for store display.
Home
Retail
Set
Operating the TV
Remote Control Button Description
ButtonDescription
1
2
3
4
5
6
7
CCDISPLAYPOWER
WIDEINPUT
~
•The 5, PLAY and CH +
buttons have a tactile
dot. Use them as a
reference when
operating the TV.
TOOLS
1 DISPLAY
2 CCPress to turn on and off the Closed Captions (CC).
3 BRAVIA
Sync
4 FAVORIT ES
5 WIDEPress repeatedly to cycle through the available Wide
6 RETURNPress to go back to the previous screen or exit from the
7 MENUPress to display the menu with TV functions and
Press to display information about channel/program or input
you are watching. The information banner will disappear in a
few seconds or press again to exit. You can enable or disable
Info Banner
the
to set
Menu
~
The TV will show the remaining time of the current program
you are watching when the program time is less than 24 hours.
To change or customize the CC display, see the online
Reference Book for more details.
These buttons are used to control the connected
equipment with Control for HDMI function (not
available on all Control for HDMI equipment). Some
other buttons on the remote control may also operate
BRAVIA
m (fast reverse): Press to play a program in fast
rewind mode.
N PLAY: Press to play a program at a normal speed.
X PAUSE: Press to pause playback.
M (fast forward): Press to play a program in fast
forward mode.
SYNC MENU: Displays the menu of the current
selected BRAVIA Sync device.
x STOP: Press to stop playback.
THEATER: Press to turn on and off the Theater
Mode. The picture settings will be set for a cinema-
like experience and the audio will be switched to the
audio output of the attached speakers of your BRAVIA
Sync audio system. Your BRAVIA Sync audio system
must be connected by an HDMI connection to your TV
(see page 16 for details).
Press once to display the stored
to exit from the
Mode settings. See page 18.
screen when displaying menu items and settings.
settings. See “Using the Menus” on page 20.
®
by pressing
Info Banner to On
SyncTM equipment.
Favorites
MENU
menu. See page 17 for details.
and go to the
or
Off
Favorites
.
Setup
menu. Press again
Operating the TV
13
8
9
CCDISPLAYPOWER
WIDEINPUT
TOOLS
ButtonDescription
8 0-9 ENTPress 0-9 to select a channel; the channel changes after
qs
a few seconds, or press ENT to change channels
immediately.
9Use with 0-9 and ENT to select digital channels.
For example, to enter 2.1, press , , and ENT.
2
1
0 VOL +/–Press to adjust the volume.
qa MUTINGPress to mute the sound. Press again or press VOL + to
qd
restore the sound.
qs POWERPress to turn on and off the TV.
qd INPUTPress to display the list of External Inputs and TV
qf
qg
qf V/v/B/bPress V/v/B/b to move the on-screen cursor. Press
mode. To toggle through the inputs, press V/v.
to select/confirm an item.
qg
TOOLS
Press to display a list of convenient functions and menu
shortcuts. The TOOLS menu items vary based on
current input and content.
qh CH +/–Press to scan through channels. To scan quickly
through channels, press and hold down either +/–.
qj JUMPPress to jump back and forth between two channels.
The TV alternates between the current channel and the
last channel that was selected.
JUMPJUMP
0
qa
qh
qj
Guidelines to follow
14
• Point your remote control directly at the IR sensor located on
your TV.
• Make sure that no objects are blocking the path between the
remote control and the IR sensor on your TV.
• Fluorescent lamps can interfere with your remote control; try
turning off the fluorescent lamps.
• If you are having problems with the remote control, reinsert or
replace your batteries and make sure that they are correctly
inserted.
TV Controls and Indicators
POWER
5
CHANNEL
6
VOLUME
7
MENU
INPUT
8
9
PIC OFF / TIMER
1
ItemDescription
1 (IR) Infrared
Receiver
Light Sensor
2 PIC OFF/
TIMER LED
3 STANDBY LED Lights up in red when the function PC Power Management is activated and there
4 POWER LEDLights up in green when the TV is turned on.
5 POWERPress to turn on and off the TV.
6 + CHANNEL – Press to scan through channels. To scan quickly through channels, press and hold
7 + VOLUME –Press to adjust the volume. In the MENU screen, these buttons serve as left/right
8
INPUT
9 MENU
Receives IR signals from the remote control.
Senses room light level and adjusts the screen brightness accordingly. Do not put
anything near the sensor or the nearby general area (as shown above), as its function
may be affected.
Lights up in amber when the Timer or Sleep functions are set. When the timer is set,
this LED will remain lit even if the TV is turned off. For details, see the online
Reference Book.
Lights up in green when the Backlight is turned off (see the online Reference Book
for more details).
is no signal received while in the PC Input (see online Reference Book for more
details). If the LED blinks in red continuously, this may indicate the TV needs
servicing (see contacting Sony information on the front cover).
down either +/–. In the MENU screen, these buttons serve as up/down buttons.
buttons.
Press to display the list of inputs. To toggle through the inputs, press the buttons
CHANNEL +/–.
In the
Press to display
23
MENU
screen, this button serves to confirm the selection or setting.
MENU with TV functions and settings (see “Using the Menus” on page 20).
STANDBY
POWER
4
~
• The CHANNEL + button has a tactile dot. Use it as a reference when operating the TV.
Operating the TV
15
Using Features
Using BRAVIA® SyncTM with Control for HDMI
The BRAVIA Sync function allows this TV to communicate with other Sony equipment
supporting the Control for HDMI function.
To connect Sony equipment with Control for HDMI
Use an HDMI cable that bears the HDMI logo for connection. See the HDMI connection shown in
the Quick Setup Guide provided with the TV documentation.
Setting the Control for HDMI
The Control for HDMI function must be set up in order for the TV to communicate with other
Control for HDMI enabled equipment. Refer to the online Reference Book for information on
how to set up this TV’s Control for HDMI function. For other equipment, refer to its operating
instructions.
Available options using Control for HDMI
The following operations are available after you connect the supported Sony equipment with
Control for HDMI function to your TV:
• Automatically turn off the connected equipment when you turn off the TV.
• The TV will automatically turn on and select the respective HDMI input.
• The connected equipment is turned on by One-Touch-Play.
• Possible operations with BRAVIA Sync buttons, see page 13.
• Equipment listed under External Inputs will turn on automatically when selected.
When a Sony A/V receiver with BRAVIA Sync is connected, the following additional operations
are possible:
• Turning on the A/V receiver when the TV is turned on.
• Adjusting the volume and muting of the A/V receiver with the TV’s remote control.
• Pressing on the remote control turns on and searches for an external audio system that
supports BRAVIA Sync. When the BRAVIA Sync audio system is on, the internal speakers of
the TV will turn off and the Picture Mode will change automatically to Cinema.
• When using BRAVIA Sync, the included remote control will change some of the buttons
functions to accommodate control over the device. If the device does not support this feature,
some buttons will remain without function.
16
Favorites
With Favorites, you can manage your preferred TV channels and External Inputs.
Adding to Favorites
1Press TOOLS to add the current channel or input while you are watching it.
2Highlight Add to Favorites and press .
Displaying Favorites
Press FAVO RIT ES on the remote control.
Using Features
Video 1Recently viewed itemsSaved channel or external inputChannel
Navigating Favorites
PC
1Press B/b to move between saved selections in a carousel-like fashion.
2When the recently viewed items are highlighted, press V/v to move between them.
3To tune to an item, highlight its icon and press .
Removing from Favorites
1Press TOOLS to remove the current channel or input while you are watching it.
2Highlight Remove from Favorites and press .
~
• Auto Program will clear your TV channels from Favorites (see page 12).
17
Wide Mode
The Wide Mode feature allows you to select the screen display of your preference. Based on the
original source, a black frame or black bars may surround the picture.
You can manually change the Wide Mode setting while watching TV by pressing the WIDE
button on your remote control.
How to set to Auto Wide
Press MENU then go to the Screen menu.
Select Auto Wide and set to On.
Changing the Wide Screen Mode
Press WIDE repeatedly to cycle through the available modes.
4:3 Original source
Standard-definition sourceHigh-definition source
mm
Wide ZoomWide Zoom
NormalNormal
FullFull
ZoomZoom
Full Pixel
This mode is not
available.
16:9 Original source
This mode is not available.
Full Pixel
~
• Normal is available with 480i or 480p sources only as they are standard-definition and not from
high-definition source such as component video input, HDMI input and digital TV.
• Full Pixel is available only for 720p, 1080i and 1080p formats excluding Cable/Antenna input.
• Full Pixel displays the picture in its native resolution.
18
Wide Mode with PC
Changing the Wide Screen Mode for
PC Timing
Press WIDE repeatedly to cycle
through the available modes while in
the PC input mode.
~
Incoming PC signalIncoming PC signal
800 × 600
1,280 × 768
mm
Wide ZoomWide Zoom
Full Pixel displays the picture in its
native resolution.
NormalNormal
FullFull
ZoomZoom
Full PixelFull Pixel
PC and HDMI Input Signal Reference Chart
After connecting the PC to the TV, set the output signal from the PC according to the chart below.
• This TV’s PC input does not support Sync on Green or Composite Sync.
• This TV’s PC VGA input does not support interlaced signals.
•Adjust Phase to eliminate horizontal lines of the picture when the TV receives an input signal
from the connected PC.
19
Using the Menus
TOOLS
WIDEINPUT
The MENU button allows you to access the variety of TV settings for you to customize the settings.
Navigating through TV Menus
V/vbutton:
Allows you to highlight options where applicable.
button:
Allows you to select the highlighted option and advance to the next screen.
Bbutton:
Allows you to move back to the previous screen.
bbutton:
Allows you to move to the next screen.
Picture
Sound
Screen
Channel
Lock
Setup
MENU
On Picture Menu, you can adjust the picture you see to fit your viewing preference. These
settings allow you to customize for the signals your TV receives; such as the broadcasted signal
or signal from your gaming equipment or from your connected equipment.
The Sound Menu allows you to customize your sound settings to suit your audio preferences.
You can also set the settings to enjoy the sound from your connected audio system.
The Screen Menu allows you to change the proportions of the screen. Depending on the signal
your TV receives, the images on the screen can fill the screen from edge to edge on the screen or
can be smaller, looking like a square in a rectangle shaped screen. The screen settings allow you
to adjust the size and shape of image you see on your TV. Use the Wide Mode option or use
Auto Wide, or 4:3 Default to keep the square like screen size.
Channels & Inputs Menu allows you to switch between the cable and antenna signal, run
Auto Program, Add Digital Channels, or you can show or hide channels to appear when you use the CH+/- button or even label channels or inputs.
Parental Lock Menu allows you to block programs according to their content and rating labels
and block channels (regardless of the programs). Set the password and limit the access based on
the rating levels or block the channel. Not every program is suited for the general audiences.
Setup Menu allows you to set and customize Closed Captions with different size and color
of the fonts, program the TV to turn off, select the Language for your on-screen display, or
change the settings related to power consumption.
• Many of the options available on your TV come with help texts on screen. If you need further
explanations on how to adjust these settings, see the online Reference Book.
• Sleep can be set from 15, 30, 60 or 120 minutes. Press MENU then go to Setup menu, select
Clock/Timers, then Sleep and select your desired minutes.
•Use TOOLS button on the remote control to quickly access convenient functions.
20
Other Information
How to Care for Your BRAVIA
Safety is very important, please read and follow the safety documentation (Safety Booklet) provided with the
TV.
• Unplug the TV and other connected equipment from the power source before you begin cleaning your TV.
Gently dust the TV with a soft cloth. Do not use any chemicals or hard material to clean the TV as they may
lead to discoloration and scratches.
Stubborn stains can be wiped with a soft cloth moisten with warm water. Do not plug the TV back until the
moisture from cleaning has evaporated.
• The TV should also be secured to a stable surface to prevent it from toppling over. Follow the instruction
provided in the online Reference Book on securing the TV section or use a Sony designed wall mount
bracket to mount the TV to wall. If you have young children or pets at home, check to see if the TV is
securely fastened regularly.
Things to consider
• If there is no picture from some video sources, check the Input selection by pressing INPUT button. You
may be watching the wrong input.
• If there is no sound, you may have accidentally pressed the MUTING button on your remote control; press
the MUTING button again or press VOL+ to deactivate muting.
• If the remote control does not operate, the batteries may be installed incorrectly or may be low. An object or
light may be interfering with the remote control’s operation.
• To reset the TV to factory default settings:
❑ Turn on the TV. Press and hold down the V button on the remote, press the POWER button on the TV
set. Release the V button.
❑ Select Product Support option under Setup menu and select OK on Return settings to factory
defaults.
IMPORTANT: The reset will clear all of your customized settings. Parental Lock password may be
required if it has been created.
If you have forgotten your password, enter the master password: 4357. This password clears your previous
password and allows you to enter a new password.
The online Reference Book provides additional information on resolving problems. Read the online
Reference Book at www.sony.com/referencebook
before contacting Sony.
Other Information
Troubleshooting
Many problems with picture and sound quality are related to improper connection of the cables; refer to the
Quick Setup Guide provided for connections.
If you have questions, service needs, or require technical assistance related to the use of your Sony TV even
after you read the online Reference Book, contact the following:
For US Support:
http://www.sony.com/tvsupport
For Canadian Support:
http://www.sony.ca/support or call 1-877-899-SONY (7669)