Sony KDL-40NX5xx, KDL-32EX6xx, KDL-32BX4xx, KDL-32EX3xx, KDL-26EX3xx User Manual

...

4-168-148-

(1)15

LCD Digital Colour TV

Operating Instructions

Start-up Guide

i-MANUAL

Additional Information

For useful information about Sony products

416814815

4-168-148-1 (1)

KDL-46EX4xx / KDL-40BX4xx / KDL-40EX4xx / KDL-40EX6xx / KDL-40NX5xx / KDL-37EX4xx / KDL-32BX3xx / KDL-32BX4xx / KDL-32EX3xx / KDL-32EX4xx / KDL-32EX6xx / KDL-32NX5xx / KDL-26EX3xx / KDL-22EX3xx

NOTICE FOR

• Some Digital TV functions may not be available in some countries/areas and DVB-C cable may not operate correctly with some providers.

CUSTOMERS IN THE UNITED KINGDOM

A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced with the same rating of fuse approved by ASTA or BSI to BS 1362 (i.e., marked with or ) must be used. When an alternative type of plug is used it should be fitted with the same rating of fuse, otherwise the circuit should be protected by a 10 AMP FUSE at the distribution board. If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station.

FUSE

How to replace the fuse

Open the fuse compartment with a blade screwdriver, and replace the fuse. Please refer to the illustration that actually equipped with the

product.

For a list of compatible cable providers, refer to the support web site:

http://support.sony-europe.com/TV/DVBC/

The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents.

Trademark information

• is a registered trademark of the DVB Project

• HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

• Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

• ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX,Inc. This is an official DivX Certified device that plays DivX video. Visit www.divx.com for more information and software tools to convert your files into DivX video. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play DivX Video-on-Demand (VOD) content. To generate the registration code, locate the DivX VOD section in the device setup menu. Go to vod.divx.com with this code to complete the registration process and learn more about DivX VOD.

• “BRAVIA” and are trademarks of Sony Corporation.

• “XMB™” and “XrossMediaBar” are trademarks of Sony Corporation and Sony Computer Entertainment Inc.

Introduction

Thank you for choosing this Sony product. Before operating the TV, please read this manual thoroughly and retain it for future reference.

Notice for Digital TV function

• Any functions related to Digital TV ( ) will only work in countries or areas where DVB-T (MPEG-2 and H.264/ MPEG-4 AVC) digital terrestrial signals are broadcast or where you have access to a compatible DVB-C (MPEG-2 and H.264/MPEG-4 AVC) cable service. Please confirm with your local dealer if you can receive a DVB-T signal where you live or ask your cable provider if their DVB-C cable service is suitable for integrated operation with this TV.

• Your cable provider may charge a fee for their services, or require you to agree to its terms and conditions of business.

• This TV set complies with DVB-T and DVB-C specifications, but compatibility with future DVB-T digital terrestrial and DVB-C digital cable broadcasts are not guaranteed.

About the model name in this manual

The “xx” that appears on the model name, corresponds to two numeric digits related to design or colour variation.

• The illustrations used in this manual are of the KDL32EX402 unless otherwise stated.

Location of the identification label

Labels for Model No. and Power Supply rating (in accordance with applicable safety regulation) are located on the rear of the TV.

Table of Contents

Start-up Guide 4

Safety information.............. ... ... .... ...................................... ....................................... ... .....9

Precautions......................................................................................................................10

i-MANUAL

Navigating through the Instruction Manual..................................................................11

Additional Information

Installing the Accessories (Wall-Mount Bracket).........................................................12

Specifications..................................................................................................................15

Troubleshooting..............................................................................................................18

: for digital channels only

• Before operating the TV, please read “Safety Information” 9. Retain this manual for future reference.

• Full operating instructions can be found on the screen.

• Instructions about “Installing Wall Mount Bracket” are included within this TV’s instructions manual.

Start-up Guide

Only for KDL-22EX3xx

1: Checking the accessories

Mains lead (1) (only for KDL-46EX4xx) Cable holder (1) (only for KDL-40/32NX5xx) Stand (1)* Screws for stand (4) (only for KDL-46EX4xx) Screws for stand (4 + 3) (only for KDL-40BX4/EX4xx,

KDL-37EX4xx, KDL-32BX3/BX4/EX3/EX4xx, KDL26EX3xx, KDL-22EX3xx)

Screws for stand (4 + 4) (only for KDL-40/32EX6xx, KDL-40/32NX5xx) Remote RM-ED022 (1) Remote RM-ED036 (1) (only for KDL-40/32EX6xx) Size AAA batteries (2)

* Disassembled except for KDL-46EX4xx.

To insert batteries into the remote

(only for KDL-40/32EX6xx)

2: Attaching the stand

Follow the assembling steps required to place on a TV stand.

1 Refer to the supplied Table-Top Stand

leaflet for proper attachment for some TV models.

2 Place the TV set on the stand. Take care

not to interfere with cables.

3 Fix the TV to the stand according to the

arrow marks that guide the screw holes using the supplied screws.

• Observe the correct polarity when inserting batteries.

• Do not use different types of batteries together or mix old and new batteries.

• Dispose of batteries in an environmentally friendly way. Certain regions may regulate disposal of batteries. Please consult your local authority.

• Handle the remote with care. Do not drop or step on it, or spill liquid of any kind onto it.

• Do not place the remote in a location near a heat source, a place subject to direct sunlight, or a damp room.

• If using an electric screwdriver, set the tightening torque at approximately 1.5 N·m (15 kgf·cm).

3: Connecting an

Coaxial cable

Connecting an aerial/cable only

Connecting an aerial/cable/VCR/DVD recorder with SCART

Scart lead

VCR/DVD recorder

Coaxial cable

Terrestrial signal

or cable

Terrestrial

signal or

cable

Connecting an aerial/cable/VCR/DVD recorder with HDMI

HDMI cable

Coaxial cable

Coaxial

cable

VCR/DVD recorder

Terrestrial signal or cable

aerial/cable/VCR/DVD recorder

Start-up Guide

• AV1 outputs available only for analogue TV.

• AV2 outputs to the current screen (except PC, HDMI, Component, USB).

4: Preventing the TV from toppling over

1 Install a wood screw (4 mm in diameter,

not supplied) in the TV stand.

Continued

2 Install a machine screw (M4 × 16, not

3,4,5

supplied) into the screw hole of the TV.

3 Tie the wood screw and the machine

screw with a strong cord.

• An optional Sony support belt kit is used to secure the TV. Contact your nearest Sony Service Centre to purchase a kit. Have your TV model name ready for reference.

5: Bundling the cables

(only for KDL-40/32NX5xx)

You can bundle the connecting cables as illustrated below.

KDL-32NX5xx

KDL-40NX5xx

Selecting the language, country/region and location

• Do not bundle the mains lead with other connecting cables.

1 Connect the TV to your mains socket

(220-240V AC, 50Hz).

2 Press 1 on the side of the TV.

When you turn on the TV for the first time, the Language menu appears on the screen.

• When you turn on the TV, the power indicator light up in green.

3 Press F/f to select the language

displayed on the menu screens, then press

+ 14 hidden pages