Sony KDL-50W670A, KDL-42W674A, KDL-42W650A, KDL-42W670A, KDL-42W658A User Manual

...

LCD TV

Operating Instructions

4-452-882-15(1)

KDL-50W670A / 42W674A / 42W670A / 42W658A / 42W654A / 42W650A / 32W674A / 32W670A KDL-32W658A / 32W654A / 32W650A / 32W600A / 24W600A

Introduction

Thank you for choosing this Sony product. Before operating the TV, please read this manual thoroughly and retain it for future reference.

• Instructions about “Installing Wall-Mount Bracket” are included within this TV’s instructions manual.

• The illustrations used in this manual may differ depending on your TV model.

• The illustrations of the remote control used in this manual are of the RM-GD027 unless otherwise stated.

• Before operating the TV, please read page 37 (Safety Information). Retain this manual for future reference.

Trademark information

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

DLNA®, the DLNA Logo and DLNA CERTIFIED® are trademarks, service marks, or certification marks of the Digital Living Network Alliance.

Manufactured under license from Dolby Laboratories.

“BRAVIA” and are trademarks of Sony Corporation.

TrackID is a trademark or registered trademark of Sony Mobile Communications AB.

Music and video recognition technology and related data are provided by Gracenote®. Gracenote is the industry standard in music recognition technology and related content delivery. For more information, please visit www.gracenote.com.

CD, DVD, Blu-ray Disc, and music and video-related data from Gracenote, Inc., copyright © 2000-present Gracenote. Gracenote Software, copyright © 2000-present Gracenote. One or more patents owned by Gracenote apply to this product and service. See the Gracenote website for a nonexhaustive list of applicable Gracenote patents.

Gracenote, MusicID, VideoID, Video Explore, the Gracenote logo and logotype, and the “Powered by Gracenote” logo are either registered trademarks or trademarks of Gracenote in the United States and/or other countries.

Wi-Fi, Wi-Fi Direct and Miracast are marks or registered marks of the Wi-Fi Alliance.

“Blu-ray Disc”, “Blu-ray” and “Blu-ray Disc” logo are trademarks of Blu-ray Disc Association.

“Sony Entertainment Network logo” and “Sony Entertainment Network” are trademarks of Sony Corporation.

MHL, Mobile High-Definition Link and the MHL Logo are trademarks or registered trademarks of MHL Licensing, LLC.

Manufactured under license from DTS Licensing Limited. For U.S. and worldwide patent and trademark information, see www.dts.com/patents/legacy.aspx. (c) DTS Licensing Limited and DTS, Inc. 2012.

Notes for Australia and New Zealand model

This product is ENERGY RATING qualified in the “Home” mode. ENERGY RATING is a program designed to promote energy efficient products and practices.

• When the TV is initially set up, it is designed to meet ENERGY RATING requirements while maintaining optimum picture quality.

• Changes to certain features, settings, and functionalities of this TV (e.g. TV Guide, Picture/Sound, Eco-Setting) can slightly change the power consumption.

Depending upon such changed settings (e.g. “Shop” mode), the power consumption may vary which possibly could exceed the stated energy rating.

To reset the TV to ENERGY RATING qualified settings, select “Home” mode from the initial set-up procedure in “Factory Settings” under the “Set-up” menu.

IMPORTANT INFORMATION

If a television is not positioned in a sufficiently stable location, it can be potentially hazardous due to falling. Many injuries, particularly to children, can be avoided by taking simple precautions such as:

• Using cabinets or stands recommended by the manufacturer of the television.

• Only using furniture that can safely support the television.

• Ensuring the television is not overhanging the edge of the

supporting furniture.

• Not placing the television on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television to a suitable support.

• Not standing the televisions on cloth or other materials placed between the television and supporting furniture.

• Educating children about the dangers of climbing on furniture to reach the television or its controls.

Location of the identification label

Labels for TV Model No. and Power Supply rating (in accordance with applicable safety regulation) and Manufacturing date are located on the rear of the TV. Labels for AC adapter Model No. and Serial No. are located at the bottom of AC adapter.

About this manual

This manual explains how to set up your TV. For more information on how to use BRAVIA TV, refer to the “Electronic manual”.

Operating Instructions

Electronic manual

(i-Manual)

Explains how to set up your TV such as connections, initial set-up, and basic operations.

For more information, press the i-MANUAL button

Explains how to use all the features. See page 20 on how to use the i-Manual.

Images and illustrations used in this manual may differ from the actual screen.

(Operating Instructions)

Table of Contents

Getting Started

Checking the accessories.........................................................................6

Inserting batteries into the remote control................................................. 6

1: Attaching the Table-Top Stand .............................................................7

2: Connections ..........................................................................................9

3: Preventing the TV from toppling over..................................................11

4: Bundling the cables ............................................................................12

5: Connecting the TV to the Internet........................................................13

6: Performing the initial set-up.................................................................14

Using Your BRAVIA TV

Watching TV

Selecting various functions and settings (Home Menu).......................... 17

Watching Internet Video..........................................................................19

............................. qg

Looking for Instructions

Looking for instructions in the electronic manual (i-Manual)

.................................. w;

Additional Information

Troubleshooting....................................................................................... 22

Specifications ..........................................................................................23

Installing the Accessories (Wall-Mount Bracket)..................................... 25

Safety Information....................................................................................37

Precautions..............................................................................................40

Getting Started

Checking the accessories

Remote control (1)

Size AAA batteries (R03 type) (2)

AC power cord (mains lead) (1)

AC adapter (1)

Cable holder (1)

Table-Top Stand (1)*

Fixing screws for Table-Top Stand

(M5 × 16) (2)

Assembling screws for Table-Top Stand

(M5 x 16) (2) (except KDL-24W600A)

Operating Instructions (this manual), other

documents and Wall-Mount Bracket

accessories

* Refer to the supplied Table-Top Stand leaflet to

assemble the Table-Top Stand.

Inserting batteries into the remote control

1 Remove the protection sheet. 2 Push and slide the cover to open.

1: Attaching the

Soft cloth

IR Sensor

Table-Top Stand

Refer to the supplied Table-Top Stand leaflet for proper attachment.

• If using an electric screwdriver, set the torque at

approximately 1.5 N·m {15 kgf·cm}.

Except KDL-24W600A

1 Place the TV set on the Table-Top Stand.

KDL-24W600A

1 Attach the Table-Top Stand to the TV set.

Getting Started

• When removing the Table-Top Stand from the TV, lay the display face down on a stable work surface that is larger than the TV.

• To prevent damaging the surface of the LCD display, make sure to place a soft cloth on the work surface.

2 Fix the TV to the Table-Top Stand using the

supplied screws.

2 Fix the TV to the Table-Top Stand using the

supplied screws. The arrow marks indicate the location of the screw holes used for securing the Table-Top Stand.

• Ensure that there are no objects in front of the TV.

(Continued)

Detaching the Table-Top

Soft cloth

Stand Necks

Stand

Soft cloth

Stand from the TV

To detach the Table-Top Stand from the TV, remove the screws fixed in step 2.

• Do not remove the Table-Top Stand for any reason other than to install corresponding accessories on the TV.

• When removing the Table-Top Stand from the TV, lay the display face down on a stable work surface that is larger than the TV.

• To prevent damaging the surface of the LCD display, make sure to place a soft cloth on the work surface.

• Once the Stand Necks are detached from the Stand, be sure to keep the Stand Necks and screws in a safe place. (Except KDL-24W600A)

• Be sure to keep the removed screws and TableTop Stand in a safe place. (KDL-24W600A only)

Except KDL-24W600A

KDL-24W600A

2: Connections

Antenna (aerial) cable (not supplied)

Set Top Box/recorder (e.g. DVD recorder)

Antenna (aerial) cable (not supplied)

HDMI cable (not supplied)

• Use an antenna (aerial) cable connector no greater than 14 mm in thickness.

• Use an HDMI cable connector within 12 mm (thickness) × 21 mm (width).

• For more information on connections, refer to the i-Manual.

Connecting an antenna (aerial)/cable/VCR

x To connect an antenna (aerial)/cable

x To connect a Set Top Box/recorder

(e.g. DVD recorder) with HDMI

Getting Started

(Continued)

x Connecting an antenna (aerial)/cable

Antenna (aerial) cable (not supplied)

AV cable (not supplied)

VCR

DVD recorder

Antenna (aerial) cable (not supplied)

AV cable (not supplied)

and VCR

Connecting audio/video devices

Connecting MHL device

Use authorized MHL2 cable with MHL logo (not supplied)

MHL device

Soft cloth

The MHL (Mobile High-Definition Link) enables the TV to communicate with a connected MHL-compatible device. The TV can charge the connected MHL-compatible device while playing photo/music/video from it. You can use the TV remote control to control the connected MHL-compatible device.

3: Preventing the

TV from toppling over

Except KDL-24W600A

Getting Started

• If “Auto Input Change (MHL)” is set to “On”, the TV automatically switches to HDMI IN 2/MHL from other input when MHL-compatible device is connected to HDMI IN 2/MHL jack. The availability of “Auto Input Change (MHL)” depends on whether the MHL-compatible device can support this feature.

• You can continue normal usage of the connected MHL-compatible device (such as receiving calls) depending on its capability.

• Some remote control functions may not be available depending on features of the connected MHL-compatible device. Please refer to the device manual for details.

• If “MHL Charging during Standby” is set to “On”, you can continue charging the MHL-compatible device even when the TV is in standby mode.

• This product is officially MHL-certified for operation with other MHL-certified devices. If you encounter any problems when using the MHL function, please consult the device manufacturer for support.

KDL-24W600A

(Continued)

6-8 mm

Screw M4 Cord

TV’s Table-Top Stand

• Before install the machine screw, lay the display face down on a stable work surface that is larger than the TV.

• To prevent damaging the surface of the LCD display, make sure to place a soft cloth on the work surface.

1 Install a machine screw (M4, not supplied)

into the screw hole of the TV and tie with a strong cord (not supplied).

2 Install a wood screw (not supplied) in the TV

stand. Then, tie the strong cord to the wood screw.

The length of the M4 machine screw differs depending on the cord diameter. Please see below illustration.

4: Bundling the

cables

• Do not bundle the AC power cord (mains lead) together with other cables.

5: Connecting the

Internet

Modem with router functions

Router

Modem

Internet

Wireless router

Modem

Internet

Preparing a wireless LAN

TV to the Internet

When you connect this TV to the Internet, you can enjoy multiple functions. For details on the functions, refer to the i-Manual.

• You will need to contract with an Internet service provider to connect to the Internet.

Preparing a wired network

KDL-50W670A, KDL-42/32W674A, KDL-42/32W670A

The built-in wireless LAN device allows you to access the Internet and your home network. With this feature, you can connect to a wireless LAN and enjoy the benefits of networking in a cable-free environment.

Except KDL-50W670A, KDL-42/32W674A, KDL-42/32W670A

Wireless LAN Ready lets you easily access the Internet and your home network with the USB Wireless LAN Adapter UWA-BR100. By inserting the USB Wireless LAN Adapter into your TV’s USB port, you can easily create a cable-free network.

Getting Started

• For LAN connections, use a Category 7 cable (not supplied).

Before setting up the wireless LAN function of the TV, be sure to set up a wireless LAN router.

6: Performing the

initial set-up

1 Connect the AC power cord (mains lead) to

the AC adapter and plug the DC cable into the DC IN terminal. Then, connect the TV to your AC power outlet (mains socket).

2 Press =/1 on the TV. The illumination LED

will light up in white. When you switch on the TV for the first time,

the Language menu appears on the screen.

• When you turn on the TV for the first time, the TV requires some internal processing for optimisation before you can perform the initial setup. There will be no picture and sound, and the illumination LED on the front of the TV blinks white for about 40 seconds. Do not turn off the TV during this process. This process has been completed at the factory for some TVs.

• The illumination LED lights up in different colours according to the status of the TV. If you do not wish to light up the illumination LED, you can turn it off later. Press HOME, then select “Settings” t “System Settings” t “General Set-up” t “Illumination LED” t “Off”. You can also press OPTIONS, then select “Illumination LED” t “Off”.

3 Press V/v/B/b to select an item, then press

Follow the instructions on the screen.

Programme Sorting: Changes the order of analogue channels stored in the TV.

1 Press V/v to select the channel you want

to move to a new position, then press .

2 Press V/v to select the new position for

the channel, then press .

• You can also tune channels manually.

Network Set-up: Sets up the Internet settings. If you do not access the Internet, or to set up later, select “Skip”. After you select “Continue” or “Start” (depending on model) at the Internet setup confirmation screen, select “Auto” to connect to the network automatically. Select “Custom” to connect manually.

• If you use WEP security, select “Custom” t “Wireless Set-up” t “Scan”. Then, select the network name (SSID) you want to connect. If you cannot find the required network name, select “[Manual Entry]” and press

network name.

• To set “Network Set-up” later, press HOME, then select “Settings” t “Network” t “Network Set-up”.

• Use the optional USB Wireless LAN Adapter to connect with your wireless router (or access point) at 5GHz. Insert USB Wireless LAN Adapter and set “Wi-Fi Direct” to “Off”. Press HOME, then select “Settings” t “Network” t “Wi-Fi Direct” t “Off”.

to enter

+ 30 hidden pages