Sony KDF-60XBR950, KDF-70XBR950 Operating Instruction

LCD Projection TV KDF-60XBR950/KDF-70XBR950

4-097-520-11 (1)

LCD Projection TV HD-Monitor Operating Instructions

KDF-60XBR950 KDF-70XBR950

 2003 Sony Corporation

WARNING

To prevent fire or shock hazard, do not expose the LCD Projection TV t o rain or moisture.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

ATTENTION

RISQUE DE CHOC ELECTRIQUE,

NE PAS OUVRIR

PRECAUCION

RIESGO DE CHOQUE ELECTRICO

NO ABRIR

Note to CATV system installer

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelin es for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

Use of this television receiver for other than pri vate viewing of programs broadcast on UHF, VHF, transmitted by cable companies or satellite for the use of the general public may require authorization from the broadcaster/cable company and/or program owner.

CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

This symbol is intended to alert the user to the presence of impor tant operating and maintenance (servicing) instructions in the literature accompanying the appliance.

CAUTION

To prevent electric shock, do not use this polarized AC plug with an extension cord, receptac le or other outlet unless the blades can be fully inserted to prevent blade exposure.

Note on Caption Vision

This television receiver provides display of television closed captioning in accordance with §15.119 of the FCC rules.

Owner’s Record

The model and serial numbers ar e lo cat ed at the rear of the LCD Projection TV, below the Sony logo, on the sticker, and also on the TV box (white label). Record these numbers in the spaces provided below. Refer to them whenever you call upon your Sony dealer regarding this product.

Model No. Serial No. ______________________

NOTIFICATION

This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference with radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

❑ Reorient or relocate the receiving antennas. ❑ Increase the separation between the equipment and

receiver .

❑ Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

❑ Consult the dealer or an experienced radio/TV

technician for help.

You are cautioned that any changes or modifications not expressly approved in this manual could void your warranty and your authority to operate this equipment.

This document is for the remote control RM-Y914. MODEL: KDF-60XBR950, KDF-70XBR950 Please keep this notice with the instruction manual.

Safety

❑ Operate the LCD Projection TV only on 120 V AC. ❑ The plug is designed, for safety purposes, to fit into

the wall outlet only one way. If you are unable to insert the plug fully into the outlet, contact your dealer.

❑ If any liquid or solid object should fall inside the

cabinet, unplug the LCD Projection TV immediately and have it checked by qualified service personnel before operating it further.

❑ If you will not be using the LCD Projection TV for

several days, disconnect the power by pulling the plug itself. Never pull on the cord.

For details concerning safety precautions, see “Important Safeguards” on page 4.

Installing

❑ To prevent internal heat buildup, do not block the

ventilation openings.

❑ Do not install the LCD Projection TV in a hot or

humid place, or in a place subject to excessive dust or mechanical vibra tion.

❑ Avoid operating the LCD Projection TV at

temperature below 41°F (5°C).

❑ If the LCD Projection TV is transported directly

from a cold to a warm location, or if the room temperature changes suddenl y, the picture may be blurred or show poor colo r. In this case, pl ease wait a few hours to let the moisture evaporate before turning on the LCD Projection TV.

❑ To obtain the best picture, do not expose the screen

to direct illumination or direct sunlight. It is recommended to use spot lighting directed down from the ceiling or to cover the windows that face the screen with opaque drapery. It is desirable to install the LCD Projection TV in a room where t he floor and walls are not of a reflective material.

“Dolby”, “Pro Logic”, and the doub le-D symbol are trademarks of Dolby Laboratories.

ATTENTION

Pour prévenir les choc s é lectriques, ne pas util iser cette fiche polarisée avec un prolongateur, une prise de courant ou une autre sortie de courant, sauf si les lames peuvent tre inserées à fond sans en laisser auc une partie à decouvert.

As an ENERGY STAR® Partner, Sony Corporation has determined that this product meets the E

TAR

guidelines for energy

efficiency.

NERGY STAR

is a U.S. registered mark.

TruSurround, SRS and the ( )

symbol are trademarks

NERGY

of SRS Labs, Inc. TruSurround technology is incorporated unde r license

from SRS Labs, Inc. BBE and BBE Symbol are trademarks of BBE Sound, Inc. and are licensed by BBE Sound, Inc. under U.S. Patent No. 4,638,258 and 4,482,866.

Important Safety Instructions

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than t he other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug do es not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11) Only use attachments/accessories specified by the manufacturer.

12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is use d , us e ca ution when moving the cart/apparatus combination to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long periods of time.

14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen in to th e appa ratus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15) Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.

Important Safeguards

For your protection, please read these instructions completely, and keep this manual for future reference.

Carefully observe and comply with all w arnings, cautions and instructions pla ced on the set or described in the operating instructions or service manual.

WARNING

To guard against injury, the following basic safety precautions should be observed in the installation, use and servicing of the set.

Use

Power Sources

This set should be operated only from the type of power source indicated on the serial/model plate. If you are not sure of the type of electrical power supplied to your home, consult your dealer or local power company. For those sets designed to operate from battery power, refer to the operating instructions.

Grounding or P olarization

This set is equipped with a polarized AC power cord plug (a plug having one blade wider than the other), or with a three-wire grou nd ing type plug (a plug h aving a third pin for grounding). Follow the instructions below:

For the set with a polarized AC power cord plug

This plug will fit into the po wer ou tlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug still fails to fit, contact your electrician to have a suitable outlet installed. Do not defeat the safety purpose of the polarized plug by forcing it in.

Alternate Warning for the set with a threewire grounding type AC plug

This plug will only fit into a groundingtype power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to have a suitable outlet installed. Do not defeat the safety purpose of the grounding plug.

Overloading

Do not overload wall o utl ets, e xte nsio n cords or convenience receptacles beyond their capacity, since this can result in fire or electric shock.

Always turn the set off when it is not being used. When the set is left unattended and unused for long periods of time, unplug it from the wall outlet as a precaution against th e possibility of an internal malfunction that could create a fire hazard.

If a snapping or pop ping s oun d fro m a TV set is continuous or frequent whil e the TV is operating, unplug the TV and c onsult your dealer or service technician. It is normal for some TV sets to make occasional snapping or popping sounds, particularly when being turned on or off.

Object and Liquid Entry

Never push objects of any kind into the set through the cabinet slots as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the set.

Attachments

Do not use attachments not recommended by the manufacturer, as they may cause hazards.

Cleaning

Clean the cabinet of the LCD Projection TV with a dry soft cloth. To remove dust from the screen, wipe it gen tly with a soft cloth. Stubborn stains may be removed with a cloth slightly dampened with solution of mild soap and warm water. Never use strong solvents such as thinner or benzine for cleaning.

If the picture becomes dark after using the LCD Projection TV for a long period of time, it may be necessary to clean the inside of th e LCD Projection TV. Consult qualified servi ce personnel.

On contamination on the screen surface

The screen surface has a special coating t o reduce a picture displayed by reflecting . If you clean the screen surface in the wrong way, the screen may be damaged. T o clean the screen, do as follows:

❑ Clean the screen with a soft cloth, such as the

supplied clean i ng clo t h or a gla s s cle an in g clo t h .

❑ To remove hard contamination, use the supplied

cleaning cloth or a glass cleaning cloth moistened with a solution of mild detergent and water.

❑ Do not use any type of abrasive pad, alkaline

cleaner, acid cleaner, scouring powder, chemical cloth, or solvent such as alcohol, benzene or thinner, as these may scratch the screen's coat ing.

Installation

Water and Moi sture

Do not use power-line operated sets near water — for example, near a bathtub, washbowl, kitc hen sink, or laundry tub, in a wet basement, or near a swimming pool, etc.

Accessories

Do not place the set on an unstable cart, stand, table or shelf. The set may fall, causing serious i njury to a chil d or an adult and seriou s da m a ge to th e se t. Use only a cart or stand recommended by the manufacturer for the specific model of LCD Projection T V. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.

Ventilation

The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. To ensure reliable operation of the set, and to protect it from overhe at i ng , the s e s l ots and openings mus t never be blocked or covered.

❑ Never cover the slots and openings

with a cloth or other materials.

❑ Never block the slots and openings

by placing the set on a bed, sofa, rug or other similar surface.

❑ Never place the set in a confined

space, such as a bookcase or built-i n cabinet, unless proper ventilat ion is provided.

Antenna Grounding According to the NEC

Refer to section 54 -300 of Canadian Elec trical Code for Antenna Ground in g.

❑ Do not place the set near or over a

radiator or heat register, or where it is exposed to direct sunlight.

Pow er-Cord Protection

Do not allow anything to rest on or roll over the power cord, and do not place the set where the power cord is subject to wear or abuse.

Antennas Outdoor Antenna Grounding

If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be lo cated in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits.

WHEN INSTALLING AN OUTDOOR ANTENNA SYSTEM, EXTREME CARE SHOULD BE TAKEN TO KEEP FROM CONTACTING SUCH POWER LINES OR CIRCUITS AS CONTACT WITH THEM IS ALMOST INVARIABLY FATAL.

Be sure the antenna system is grounded so as to provide some protection against vo ltage sur ges and b uilt-up static charges.

Section 810 of the National Electrical Code (NEC) in USA and Section 54 of the Canadi an Electrical Code in Canada provides information with respect to proper grounding of the mast and supporting structure, grounding of the lea d-in wire to an antenn a dis c h arge unit, size of grounding conductors, location of antenna discharge unit, connecti on to grounding electrodes, and requirements for the grounding elect rode.

Antenna lead-in wire

Ground clamp

Antenna lead-in wire

Electrical service equipment

NEC: National Electrical Code

(NEC Section 810-20)

Grounding conductors (NEC section 810-21)

Ground clamps

Power service grounding electrode system (NEC Art 250 Part H)

Lightning

For added protection for this television receiver during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage to the receiver due to lightning and power-line surges.

Service

Damage Requiring Service

Unplug the set from the wall outlet and refer servicing to qualified service personnel under the following conditions:

❑ When the power cord or

plug is damaged or f rayed.

❑ If liquid has been spilled into

the set.

❑ If the set has been exposed

to rain or water.

❑ If the set has been subject to

excessive shock by being dropped, or the cabinet has been damaged.

❑ If the set does not operate

normally when following the operating instructions. Adjust only those controls that are specified in the operating instructions. Improper adju s t m en t of other controls may result in damage and will often require extensive work by a qualified technician to restore the set to normal operation.

❑ When the set exhibits a distinct change in

performance, it indicates a need for service.

Servicing

Do not attempt to service the set by yourself since opening the cabinet may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

Replacement Parts

When replacement parts are required, be sure the service technician certifies in writing that he has used replacement parts specif ied by the manufactu rer that ha ve the same characteristics as the origi nal parts.

Unauthorized substitutions may result in fire , electric shock or other hazards.

Safety Check

Upon completion of any service or repairs to the set, ask the service technician to perform routine safety checks (as specified by the manufacturer) to determine that the set is in safe operating condition, and to so certify. When the set reaches the end of its useful life, improper disposal could result in a picture tube implosion. Ask a qualified service technician to dispose of the set.

For Safety

Be careful when moving the LCD Projection TV

When you place the LCD Projection TV in position, be careful not to drop it on your foot or fingers.

Watch your footing while installing the LCD Projection TV.

Carry the LCD Projection TV in the specified manner

If you carry the LCD Projec tio n TV in a manner other than the specified manner and without the specified number of persons, it may drop and a serious injury may be caused. Be sure to follow the instructions mentioned below.

❑ Carry the LCD Projection TV with the specified

number of pers ons (see page 18) .

❑ Do not carry the LCD Projection TV holding the

speaker grill.

❑ Hold the LCD Projection TV tightly when carrying

it.

About the LCD Projection TV

Although the LCD projection TV is made with highprecision techno logy, black dots may appear or bright points of light (red, b lue, or gree n) may ap pear cons tantly on the LCD screen. This is a structural property of the LCD panel and is not a malfunction.

Installation

❑ If direct sunlight or other strong illumination shines

on the screen, part of the screen may appear white due to reflections from behind the screen. This is a structural property of the LCD Projection TV. Do not expose the screen to direct illumination or direct sunlight.

❑ The picture quality may be affected by yo ur vie win g

position. If you sit too close to the TV, you may suffer f ro m e ye fatigue. For the best picture quality, install your LCD projection TV according to the operating instructions. Sit at least 2.2 m (approx. 7 ft.) for KDF-60XBR950 or 2.6 m (approx. 8 ft.) for KDF-70XBR950 away from your LCD projection TV, and within 60° of the vertical vi ewing area, and 130° of the horizon t al viewing area.

❑ When installing your LCD Projection TV against a

wall, keep it at least 10 cm (4 inches) from the wall.

❑ Avoid installing the LCD projection TV near a

heater, etc.

Projection lamp

❑ Your LCD projection TV uses a projection lamp as

its light source. When the projection lamp wears out after using the LCD projection TV for a long period of time, the screen image becomes dark, or no image will appear on the display. If the lamp replacement indicator of the front panel blinks in red, repla c e the lamp with a new one (not supplied). In some cases, the bulb bursts inside the lamp unit noisily, but the lamp unit is securely designed so that the pieces of broken glass remain inside the lamp unit. (See “Replacing the Lamp” on page 13.)

Cooling fan

❑ This LCD projection TV uses a cooling fan to

prevent the internal temperature from heating up. You might hear the noise from the cooling fan, depending on the plac e yo u ins ta ll the LCD projection TV.

Contents

Introducing the Sony LCD Projection TV

Presenting the Sony LCD Projection TV.................9

Using This Manual.............................. .... ...............10

Enjoying Your LCD Projection TV.......................11

Replacing the Lamp...............................................13

Installing and Connecting the LCD Projection TV

Contents.................................................................17

Inserting Batteries into the Remote Control..........17

Carrying Your LCD Projection TV.......................18

To Prevent the LCD Projection TV from Falling

Down..............................................................19

When Installing Your LCD Projection TV

Against a Wall...............................................19

Recommended Viewing Area ................................20

LCD Projection TV Controls and Conn ecto rs.......21

Basic Connections: Connecting a Cable or

Antenna..........................................................25

Connecting a VCR and Cable................................32

Connecting a VCR and Cable Box........................33

Connecting Two VCRs for Tape Editing ..............35

Connecting a Satellite Receiver.............................36

Connecting a Satellite Receiver with a VCR.........37

Connecting an Audio Receive r.................. .... ........39

Connecting a DVD Player with Component

Video Connectors..........................................40

Connecting a DVD Player with A/V Connectors ..41

Connecting a Camcorder .......................................42

Connecting a Device with an Optical

IN Connector..................................................43

Using the CONTROL S Feature............................44

Setting Up the LCD Projection TV

Automatically.................................................45

Using the Features

Using the Remote Control.....................................46

Programming the Remote Contro l.........................48

Using Other Equipment with Your LCD Projection

TV Remote Control .................................. .... .50

Watching the TV....................................................52

Using Favorite Channels................. ...................... .54

Using Twin View™...............................................55

Using the Freeze Function.....................................58

Using Wide Screen Mode......................................59

Using the Digital Program Guide

Displaying the Digital Program Guide..................60

Using the Memory Stick Viewer

About Memory Stick.............................................64

Inserting and Removing a Memory Stick..............66

Using the Memory Stick Index..............................69

Viewing Photos......................................................71

Playing Movies............................................... .... ...74

Memory Stick Index Menu Bar Options...............76

Notes on Using Memory Stick Media...................78

Using i.LINK

About i.LINK.........................................................80

Selecting an i.LINK Device...................................83

Using the i.LINK Control Panel............................84

i.LINK Setup..........................................................86

Using the Menus

Overview................................................................87

Using the Video Menu...........................................88

Using the Audio Menu...........................................92

Using the Screen Menu..........................................94

Using the Channel Menu.......................................96

Using the Parent Menu ..........................................98

Using the Setup Menu .........................................102

Other Information

Overview..............................................................106

Glossary...............................................................107

Contacting Sony............................ .... ...................108

Troubleshooting...................................................108

Flashing Indicators on the Front of the Monitor..114

Specifications.......................................................115

Introducing the Sony LCD Projection TV

Presenting the Sony LCD Projection TV

Thank you for purchasing the Sony LCD Projection TV. This manual is for models KDF-60XBR950 and KDF-70XBR950.

Features Some of the features that you will enjoy with your new LCD projection TV

include:

❑ Integrated HDTV: You can watch digital television programs and

enjoy the improved audio/video quality offered by these programs.

❑ DRC

❑ CineMotion

❑ Twin View

❑ Memory Stick

❑ Parental Control: V-Chip technology allows parents to block

❑ Digital Visual Interface (DVI-HDTV): Can accommodate a copy-

(Digital Reality Creation) Multifunction V1: Unlike

conventional line doublers, the DRC feature converts frames reproduced every 1/60 th of a seco nd in real time, m inimizing th e blur or g host of t he motion images (for 480i signals only).

™

: Using the reverse 3-2 pull down technology, the

CineMotion feature allows you to obtain a smooth picture movement when playing back movies or other video sources on film.

™

: Using Multi-Image Driver (MID-X), Twin View allows

you to watch two programs side by side with the ability to zoom in on one picture and listen to the program in the selected window. You can watch pictures from two different sources (1080i, 720p, 480p or 480i) simultaneously.

Viewer: Allows you to view on your LCD Projection

TV screen digital photos (JPEG) and movies (MPEG1) that are stored on Memory Stick media.

unsuitable programming for younger viewers.

protected digital connection (HDCP set-top boxes) that have compatible interfaces. The DVI-HDTV input terminal is compliant with the EIA-861 standard and is not intended for use with per s onal compute rs.

) to other devices (such as digital

Introducing the Sony LCD Projection TV

* High-bandwidth Digital Content Protection

(Continued)

Introducing the Sony LCD Projection TV

❑ i.LINK: Provides a secure digital interface to other digital home

entertainment devices. i.LINK allows for the secure transfer of copyright-protected high-definition content between these devices and your LCD projection TV. The i.LINK is not compatible with pers onal computers.

❑ Component Video Inputs: Offers the best video quality for DVD

(480p, 480i) and Digital Set-top box (1080i, 720p, 480p, 480i) connections.

❑ S-VIDEO Inputs: Provides a high-quality image for connected

equipment.

❑ Favorite Channel Preview : Preview up to sixteen favorite channels

without leaving the current channel.

❑ Wide Screen Mode: Allows you to watch 4:3 normal broadcasts in

wide screen mode (16:9 aspect ratio).

❑ Auto Wide: All ows you to select the wide screen mode automatically.

Using This Manual

We recommend that you carefully review the contents of the following three sections in the order shown to ensure that you fully un derst and the operat ion of your new LCD projection TV.

1 Installing and Connecting the LCD Projection TV

This section guides you through your initial setup. It shows you how to install your LCD projectio n TV, to connect your new compon ents and to connect the antenna and cable.

2 Using the Features

This section shows you how to begin using your new LCD projection TV. It also shows you how to use your remote control functions.

3 Using the menus

This section teaches you ho w to access on-screen menus and adjus t your LCD projection TV settings.

Instructions in this manual are written for the remote control. Similar controls are also found on the LCD projection TV console.

Introducing the Sony LCD Projection TV

Enjoying Your LCD Projection TV

Screen

Indicators

The indicators show the current status of your LCD projection TV.

Screen

To minimize screen reflection, its surface has a special coating. Read the instructions “Use of the Cleaning Cloth” on page 12 carefully before cleaning.

Inappropriate cleaning methods could damage the finishing.

Projection lamp

Your LCD projection TV uses a projection lamp as its light source. Note the following:

Projection lamp

Introducing the Sony LCD Projection TV

Indicators

❑ After turning on y our LCD pr ojection TV, it may tak e a whi le be fore t he

picture appears (1 minute or less).

❑ When the projection lamp wears out, the screen image becomes dark.

Replace the lamp with a new Sony XL-2100U replacement lamp (not supplied).

✍ Be sure to attach the lamp cover securely; otherwise, your LCD

projection TV will not turn on. For details on lamp replacement, see “Replacing the Lamp” on page 13.

✍ The light emitted from the lamp is quite bri ght when your LCD proj ection

TV is in use. To avoid eye discomfort or injury, do not look into the housing when the power is on.

Introducing the Sony LCD Projection TV

Notes on the LCD Projection TV

To enjoy clear pictures

Be sure not to allow sunlight or light from a lamp to shine directly onto

❑

the screen.

❑ The screen surface is easily scratched. Do not rub, touch , or tap it with a

sharp or abrasive object (see “Use of the Cleaning Cloth” below).

On moisture condensation

❑

If your LCD project ion TV is t ransp orted directly from a cold to a w arm location, is placed in a humid room, or if the room temperature changes suddenly, the picture may be blurred or show poor color. This is because moisture has condensed on the lenses inside. If this happens, leave the power on and let the moisture evaporate before using your LCD projection TV.

When the LCD projection TV will not be used for a long period of time

❑

Turn off the main power on the front of your LCD projection TV before going to sleep or going out. Disconnect the AC plug if idle for more than 7 days.

When turning off the power

Be sure to turn off the power switch on the main unit or on the remote

❑

control. After turning off the power, the fan will continue to blow for about two minutes. Be sure to wait for several minutes after turning the power off when unplugging from the outlet or switch ing t h e break er of f.

Use of the Cleaning Cloth

When carrying the LCD Projection TV

❑

Before carrying, unplug the power cord and disconnect all cables. Do not carry the LCD projection TV by placing hands under the front screen.

To remove dust from the front of the screen, wipe w ith the supplied Cleaning Cloth.

✍ Do not use any type of abrasive pad, alkaline cleaner, scouring powder,

window cleaners or solvent such as alcohol or benzene. Otherwise, this type of contact may result in a damaged screen.

✍ To clean the screen, please use the supplied Cleani ng Cloth lig htly

moistened with water diluted mild detergent solution. Do not app ly heavy press when cleaning.

✍ The supplied Cleaning Cloth is washable with warm water and a mild

detergent solution, and can be used repeatedly.

Introducing the Sony LCD Projection TV

Replacing the Lamp

Introducing the Sony LCD Projection TV

The projection lamp has a limited life which illuminates the picture. If the screen becomes dark, the color looks unusual, or the LAMP indicator

on the front of the LCD projection TV flashes, it is time to replace the lamp with a new one (not supplied).

WARNING

Electric appliances can cause fire or high temperature, resulting in injury or death. Be sure to follow the instructions below.

❑ Use a Sony XL-2100U replacement lamp (not supplied) for

replacement. Failure to do so may damage the LCD projection TV.

❑ Do not remove the lamp for any purpose other than replacement.

Failure to do so may cause fire or a skin burn.

❑ Before replacing the lamp, turn the power off on the main unit, then

several minutes later, unplug the power cord. (The cooling fan will continue to blow for about two minutes after turning the power off.)

❑ Before replacing the lamp, let it cool down completely, as the surface of

the lamp remains extremely hot for at least 30 minutes after the power has been turned off.

❑ Do not leave the removed lamp near flammable materials or within the

reach of children.

❑ Do not pour water onto the removed lamp, or put any object inside the

lamp. Doing so may cause the lamp to burst.

❑ Do not put flammable materials and metal objects inside the lamp

receptacle of the LCD projection TV after remo ving the lamp. Doing so may cause fire or electrical shock. Also, be sure not to touch the receptacle, because it may cause a skin burn.

❑ Mount the new lamp securely, otherwise the screen may become dark,

or it may cause a fire.

❑ Do not touch the glass with your fingers on the new lamp.

The used lamp

Used lamp contains Mercury, Dispose According to Local, State or Federal Laws.

✍ Do not touch the front glass of a new lamp or the glass of the lamp

receptacle. This may reduce picture quality or lamp life.

(Continued)

Introducing the Sony LCD Projection TV

1 Turn off the power switch on the LCD projection TV and after several

minutes, unplug the power cord. (The cooling fan will continue to blow for about two minutes after turning the power off.)

✍ Do not touch the front glass of a new lamp or the glass of the lamp

receptacle. This may reduce picture quality or lamp life.

2 Unplug the power cord after turning off the main po wer . Wait at least 30

minutes to allow the lamp to cool down before replacing it. Take the new lamp out of the box.

3 Remove the control panel cover.

Push and release the center in the upper of the control panel cover to open it.

Loosen the screw in the right underneath with a coin or similar object and remove the control panel cover.

Introducing the Sony LCD Projection TV

4 Loosen the screw with a coin or similar object to remo v e the lamp cov er.

5 Loosen the two screws that secure the lamp, then pull out the lamp.

The lamp is very hot immediately after use. Never touch the front glass of the lamp or the surrounding parts.

Introducing the Sony LCD Projection TV

Loosen the tw o scre ws a s sho wn in the illustration using the hex key supplied with the lamp.

Hold the handle and pull straight out.

✍ After it has cooled, place the removed lamp into the empty box of the

replacement lamp. Never put the removed lamp into a plastic bag.

6 Mount the new lamp.

Be sure to attach the new lamp securely.

Mount the new lamp securely into the lamp receptacle.

Tighten the two screws securely as shown in the illustration using the hex key supplied with the lamp.

(Continued)

Introducing the Sony LCD Projection TV

7 Mount the lamp cover and tighten the screw.

Make sure that the lamp cov er is mounted securely, otherwise the power will not turn on.

✍ If the lamp cover is not mounted securely, the self-diagnostic

function works and the POWER/ST ANDBY indicator flashes for th ree times.

8 Mount the front panel in the order of 1 to 3, as shown in the

illustration.

Match the projections of the undern eath of the lamp cover with the holes of the unit, and replace the lamp cover as it was.

1 Match the projection

of the left side.

2 Secure the screw of

the right side.

3 Close the front pa nel.

✍ Consult your Sony dealer for a Sony XL-2100U replacement lamp. ✍ Take great care when replacing the lamp or plugging in/unplugging

the connecting cords. If you handle them roughly, the LCD projection TV may fall or be moved, and the TV stand or floor surfaces may be scratched.

Installing and Connecting the LCD Projection TV

The box contains your new LCD projection TV, a remote control and two AA (R6) batteries. No peripheral cables are included. If you intend to add additional equipment to your LCD projection TV, please check the hookup instructions for your desired setup before you begin. You may need to purchase cables and/or splitters to complete the hookup properly.

Inserting Batteries into the Remote Control

Insert two size AA (R6) batteries (supplied) by matching the + and – on the batteries to the diagram inside the battery compartment.

Installing and Connecting the LCD Projection TV

Coin Lock

✍ Remove the batteries to avoid damage from possible battery leakage

whenever you anticipate that the remote control will not be used for an extended pe riod.

✍ Handle the re mote control with care. Avoid dropping it, ge tting it wet, or

placing it in direct sunlight, near a heater, or where the humidity is high.

✍ Your remote control can be programmed to operate most video

equipment. (See “Programming the Remote Control” on page 48.)

Installing and Connecting the LCD Projection TV

Carrying Your LCD Projection TV

Carrying the LCD projection TV requires at least four people. Do not grasp the pedestal or the front panel of the LCD projection TV, otherwise these parts migh t break off.

When moving the LCD projection TV, support the screen bottom with one hand while grasping the top part with the other hand, as shown in the illustration below.

Do not grasp the pedestal or the front panel of the LCD projection TV.

Installing and Connecting the LCD Projection TV

To Prevent the LCD Projection TV from Falling Down

Pay special attention to children around the LCD projection TV. If children should climb onto or push the LCD projection TV or its stand SU-GW3 (not supplied), it may fall down.

When Installing Your LCD Projection TV Against a Wall

Keep your LCD projection TV at least 10 cm (4 inches) from the wall.

Installing and Connecting the LCD Projection TV

min. X.X m (approx. X ft.)

70"

min. X.X m (approx. X ft.)

60"

70"

min.

X.X

m (approx.

ft.)

min. X.X m (approx. X ft.)

Recommended Viewing Area

The picture quality may be affected by your viewing position. For the best picture quality , ins tall your LC D projection TV within the areas

shown below. Sit at least 2.2 m (approx. 7 ft. ) for KD F -60 XBR9 50 or 2.6 m (ap pro x. 8 ft .)

for KDF-70XBR950 away from your LCD projection TV, and within 60° of the vertical viewing area, and 130° of the horizontal viewing area.

Horizontal Viewing Area

min. X.X m (approx. X ft.)

min. 2.6 m (approx. 8 ft.)

min. X.X m (approx. X ft.)

min. 2.2 m (approx. 7 ft.)

60"

70"

Vertical Viewing Area

min. X.X m (approx. X ft.)

min. 2.6 m (approx. 8 ft.)

70"

X.X

2.2

m (approx.

60"

70"

30˚

ft.)

min.

Installing and Connecting the LCD Projection TV

LCD Projection TV Controls and Connectors

Front Panel Menu Controls

The front panel menu controls allow access to the on-screen menus without using the remote control. Pressing

MENU brings up the on-screen menus.

The arrow buttons move the on-screen cursor in the menus and by pressing the button selects the menu item.

i.LINK

S VIDEO

VIDEO 2 IN

VIDEO

(MONO)

L–AUDIO–R

MENU TV/VIDEO

How to open and close the front panel

To open

VOL CH

Installing and Connecting the LCD Projection TV

Push and release.

To close

PRO

POWER

(Continued)

Installing and Connecting the LCD Projection TV

Item Description

1 Memory Stick slot Memory Stick insertion slot. For details, see “Inserting

2 Memory Stick

indicator

3 POWER Press to turn on and off the LCD projection TV.

LCD Projection TV Rear and Front Panel Connectors

Rear of LCD projection TV

and Removing a Memory Stick” on page 66. When lit, indicates that the Memory Stick is being read.

(Do not remove the Memory Stick when the indicator is lit.)

Installing and Connecting the LCD Projection TV

Front Panel of LCD projection TV

Installing and Connecting the LCD Projection TV

S VIDEO

Front panel connectors are in the control panel cover. To open and close the cover, refer to page 21.

VIDEO 2 IN

VIDEO

(MONO)

L–AUDIO–R

Connection Description

1 VHF/UHF Connects to your VHF/UHF antenna or cable box output

jack.

2 CABLE Connects to your cable signal. This CABLE input jack, in

conjunction with the VHF/UHF input jack, lets you set up your LCD project ion TV to switch between scrambled channels (coming through a cable box) and unscrambled cable channels. For details , see page 28.

3 i.LINK Connects to i.LINK-compatibl e devices. These terminals

are not intended for connection with person al compu ter s.

4 S VIDEO

(Front and rear)

Connects to the S VIDEO OUT jack of your VCR or other S VIDEO-equipped video co mponent. Provides better picture quality than the VHF/UHF j acks or the Video IN jack.

5 VIDEO/

(L/R) AUDIO (Front and rear)

Connects to the audio and video OUT jacks on yo ur VCR or other video component. A fourth video input (VIDEO 2) is located on the f ront panel of the LCD pro jection TV.

(Continued)

Installing and Connecting the LCD Projection TV

Connection Description

6 DIGITAL AUDIO

(OPTICAL) OUT (PCM/DOLBY* DIGITAL)

7 HD/DVD IN (1080i/

720p/480p/480i)

8 CONTROL S

IN/OUT

9 AUDIO OUT

(VAR/FIX) L/R

Connects to the optical audio input of a digital audio component that is PCM/Dolby digital com patib le .

Connects to your DVD player’s or Digital Set-top box’s component video (Y, P

B, PR) and audio (L/R) jacks.

To control other Sony equipment with the LCD projection TV's remote control, connect the CONTROL S IN jack of the equipment to the CONTR OL S OUT jack on the LCD projection TV with the CONTROL S cable.

To control the LCD projection TV with a r e mote control for another Sony product, connect the CONTROL S OUT jack of the equipment to the CONTROL S IN jack on the LCD projection TV with the CONTROL S cable.

Connects to the le ft an d ri g h t audio inputs of y ou r au dio or video compone n t.

0 DVI-HDTV VIDEO

AUDIO L/R (VIDEO 7 IN)

Can accommodate a copy-protected digital connection

(HDCP

) to other devices (such as digital set-top boxes) that have compatible interfaces. The DVI-HDTV input terminal is compliant with the E IA-86 1 stan da rd a n d is n ot intended for use with personal computers. See the instruction manual that came with your equipment for details about connecting and using it with the LCD projection TV.

qa i.LINK Connects to the i.LINK jack on your i.LINK-compatible

portable device. Provides a secure digital connection between your LCD projection TV and your i.LINKcompatible portable device.

“Dolby”, “Pro Logic”, an d the double-D symbol are trademarks of Dolby Laboratories.

High-bandwidth Digital Content Protection

Installing and Connecting the LCD Projection TV

Basic Connections: Connecting a Cable or Antenna

The way in which you will connect your LCD projection TV varies, depending on how your home receives a signal (cable, cable box, antenna) and whether or not you plan to connect a VCR.

If You Are Connecting See Page

Cable or Antenna Only

❏ No cable box or VCR

Cable Box and Cable Only

❏ Cable box unscrambles only some channels

(usually premium channels)

❏ No VCR

Cable Box Only

❏ Cable box unscrambles all chann e ls ❏ No VCR

If you are connecting a VCR

❑

See the connections described on pages 32 and 33.

Installing and Connecting the LCD Projection TV

Cable or Antenna Only

For best results, use one of the following connections if you are connecting a cable or an antenna and you:

❑ Do not need a cable box to unscramble channels. (If you have a cable

box, see pages 28 to 30.)

❑ Do not intend to connect a VCR. (If you have a VCR, see pages 32 and

33.)

The connection you choose depends on the cable type you have in your home, as described bel ow.

75-ohm coaxial cable (usually found in newer homes)

Cable Type Connect As Shown

VHF Only or combined VHF/ UHF

Cable

300-ohm twin lead cable (usually found in older homes)

Cable Type Connect As Shown

VHF Only or UHF Only or combined VHF/UHF

75-ohm coaxial cable

300-ohm twin lead cable

Rear of LCD projection TV

VHF/UHF

Rear of LCD projection TV

CABLE

Rear of LCD projection TV

VHF/UHF

Antenna conn ector (not supplied)

75-ohm coaxial and 300-ohm twin lead cable (found in some homes)

Cable Type Connect As Shown

VHF and UHF

75-ohm coaxial cable

Rear of LCD projection TV

VHF/UHF

300-ohm twin lead cable

U/V mixer (not supplied)

Installing and Connecting the LCD Projection TV

Notes on Using This Connection

To Do This ... Do This ...

Switch the TV’s input between the cable and antenna

Press ANT to switch back and forth between the TV’s VHF/UHF and CABLE inputs.

✍ It is highly recommended to connect the antenn a using a 75-ohm coaxial

cable to get optimum picture quality. A 300-ohm twin lead cable can be easily affected by radio noise and the like, resulting in signal deterioration. If you use a 300-ohm twin lead cable, keep it away as far as possible from the LCD projection TV.

✍ Do not use an indoor antenna because it is especially susceptible to

radio noise.

Installing and Connecting the LCD Projection TV

Cable Box and Cable Only

For best results, use this connection if:

❑

Your cable company scrambles some channels, such as premium channels (which requires yo u to us e a cable box), but does not scramble all channels.

❑ You do not have a VCR. (If you have a VCR, see pages 32 and 33.)

With this connection you can:

❑

Use the LCD projection TV remote control to change channels coming through the cable b ox to the LC D projecti on TV’s VHF/ UHF input jack. (You must first program the remote control for your specific cable box; see “Programming the Remote Control” on page 48.)

❑ Use the LCD projection TV remote control to change channels coming

directly into the LCD projection TV’s CABLE input. (The LCD projection TV’s tuner provides a better signal than the cable box.)

CATV cable

Splitter

Coaxial cable

IN OUT

Cable box

VHF/UHF

Rear of LCD projection TV

CABLE

About Using This Connection with Dual Picture (Twin View, etc.) Features

With this connection, you can use all the dual picture features for unscrambled channels coming directly into the LCD projection TV’s CABLE input jack.

Notes on Using This Connection

To Do This ... Do This ...

Use the cable box Tune the LCD projection TV to the channel the

cable box is set to (usually channel 3 or 4) and

then use the cable box to switch channels.

Set up the LCD projection TV remote control to operate the

Program the remote control. See “Programming

the Remote Control” on page 48.

cable box Activate the remote control to

operate the cable box

Press FUNCTION repeatedly until the SAT/

CABLE indicator lights up.

Installing and Connecting the LCD Projection TV

Prevent the accidental switching of TV channels

Switch the LCD projection TV’s input between the cable box and cable

When using the cabl e box, you need the LCD

projection TV to stay on the ch annel the cable

box is set to (usually channel 3 or 4). You can

use the LCD projection TV’s Channel Fix

feature to lock in a specific channel. For details,

see “Using the Channel Menu” on page 96.

Press ANT to switch back and forth between the

LCD projection TV’s VHF/UHF (scrambled

channels) and CABLE (unscrambled) inputs.

Installing and Connecting the LCD Projection TV

Cable Box Only For best results, use this connection if:

❑

Your cable company scram bles al l channels, wh ich requi res you to use a cable box.

❑ You do not have a VCR. (If you have a VCR, see pages 32 and 33.)

With this connection you can:

❑

Use the LCD projection TV remote control to change channels coming through the cable box to the LCD projection TV’s VHF/UHF jack. (You must first program the remote control for your specific cable box.)

About Using This Connection with Dual Picture (Twin View, etc.) Features

With this connection, all channels come into the LCD projection TV through your cable box and only one unscrambled signal is sent to the LCD projection TV , so you cannot use the dual picture features. If some of your channels are scrambled, but others are not, consider using the “Cable Box and Cable Only” connection on page 28 instead.

To connect the cable box

1 Connect the CATV cable to the cable box’s input jack. 2 Use a coaxial cable to connect the cable box’s output jack to the LCD

projection TV’s VHF/UHF jack.

3 Run the Auto Setup program, as described in “Setting Up the LCD

Projection TV Automatically” on page 45.

CATV cable

Cable box

Notes on Using This Connection

To do this... Do This ...

Use the cable box Tune the LCD projection TV to the channel the cable box

Set up the LCD projection TV remote control to operate the cable box

Coaxial cable

OUT

is set to (usually channel 3 or 4) and then use the cable box to switch channels.

Program the remote control. See “Programming the Remote Contro l” on pages 48.

VHF/UHF

Rear of LCD projection TV

+ 90 hidden pages