4-748-704-11(1)
Television
Reference Guide
GB
CT
KD-77A9G / 65A9G / 55A9G
Note
To attach the Table-Top
Stand, refer to the Setup
Gu
ide.
Table of Contents
Safety Information . . . . . . . . . . . . . . . . . . . . .2
Protecting the TV Screen (OLED TV) . . . . . . .4
Parts and Controls . . . . . . . . . . . . . . . . . . . 5
Controls and Indicators . . . . . . . . . . . . . . . . . 5
Using Remote Control . . . . . . . . . . . . . . . . 6
Remote Control Parts Description . . . . . . . . .6
Connection Diagram . . . . . . . . . . . . . . . . . 8
Installing the TV to the Wall . . . . . . . . . . 10
Using the optional Wall-Mount Bracket
(SU-WL850 or SU-WL450) . . . . . . . . . . . . . . 10
Troubleshooting. . . . . . . . . . . . . . . . . . . . 12
Troubles and Solutions. . . . . . . . . . . . . . . . . 12
Specifications . . . . . . . . . . . . . . . . . . . . . . 13
Introduction
Thank you for choosing this Sony product.
Before operating the TV, please read this manual thoroughly and
tain i t for fu ture re ference.
re
• Before operating the TV, please read the “Safety Information”
2).
(page
• Read the supplied Safety Informa
information.
• Instructions about “Installing the TV to the Wall” are included
ithin this TV’s instruction manual.
w
• Images and illustrations used in the Setup Guide and this
nual are for reference only and may differ from the actual
ma
product.
tion for additional safety
Help
Find more troubleshooting and other useful information
directly from your TV. Press HELP on the remo te control to
display a list of topics, or to search by keyword.
Help Guide (Manual)
For more detailed information, select [Help Guide] from the
Help menu on your TV. You can also check the Help Guide from
your PC or smartphone (information provided on the back
cover of this manual).
Location of the identification label
Labels for the TV Model No. and Power Supply rating are located
on the rear of the TV. They can be found by removing the stand
cover .
This television is designed for use in Hong Kong and ensured
he usage in Hong Kong only.
t
Safety Information
Installation/Set-up
Install and use the TV set in accordance with the instructions
below in order to avoid any risk of fire, electric shock or damage
and/or injuries.
Installation
• The TV set should be installed near an easily accessible AC
power outlet (mains socket).
• Place the TV set on a stable, level surface to prevent it from
alling over and causing personal injury or property damage.
f
• Install the TV where it cannot be pulled, pushed, or knocked
.
over
• Install the TV so that the TV’s Table-Top Stand does not protrude
om the TV stand (not supplied). If the TV’s Table-Top Stand
out fr
protrudes out from the TV stand, it may cause TV set to topple
over, fall down, and cause personal injury or damage to the TV.
GB
2
GB
Screw (M6)
Wall-Mount Bracket
9 mm - 13 mm
TV’s rear cover
M4 screw (not supplied)
1.5 N·m
{15 kgf·cm}
Screw (not supplied)
6 mm - 7 mm
Cord (no t
supplied)
30 cm
10 cm
10 cm
10 cm
1 cm
Leave at least this space around the set.
30 cm
10 cm
10 cm
Leave at least this space around the set.
6 cm
• For safety reasons, be sure to attach the centre covers to the
rear of the TV when TV in Table-Top condition.
• Only qualified service personnel should carry out wall-mount
installations.
• For safety reasons, it is strongly recommended that you use
ony accessories, including:
S
all-Mount Bracket SU-WL850
W
all-Mount Bracket SU-WL450
W
• Be sure to use the screws supplied with the Wall-Mount Bracket
attaching the Wall-Mount Bracket to the TV set. The
when
supplied screws are designed as indicated by illustration when
measured from the attaching surface of the Wall-Mount Bracket.
The diameter and length of the screws differ depending on the
all-Mount Bracket model.
W
Use of screws other than those supplied may result in internal
age to the TV set or cause it to fall, etc.
dam
Tran spo rti ng
• Before transporting the TV set, disconnect all cables.
• Two or three people are needed to transport a large TV set.
• When transporting the TV set by hand, hold it as shown below.
not put stress on the panel and the frame around the screen.
Do
• When handling or mounting the
V set, do not lay down the TV.
T
• When transporting the TV set, do
t subject it to jolts or excessive vibration.
no
• When transporting the TV set for repairs or when moving, pack
using the original carton and packing material.
it
Topple prevention
Ventilation
• Never cover the ventilation holes or insert anything into the
cabinet.
• Leave space around the TV set as shown below.
• It is strongly recommen ded that you use a Sony Wall-M ount
acket in order to provide adequate air circulation.
Br
Installed on the wall
Installed with stand
GB
3
• To ensure proper ventilation and prevent the collection of dirt or
Do not block the air circulation area.
Air circulation
Wall
Air circulation is blocked.
Wall
dust:
ot lay the TV set flat, install upside down, backwards, or
Do n
sideways.
ot place the TV set on a shelf, rug, bed or in a closet.
Do n
o not cover the TV set with a cloth, suc h as curtains, or items
D
such as newspapers, etc.
ot install the TV set as shown below.
Do n
Protecting the TV Screen (OLED TV)
Precautions to Protect the Screen from
Damage
Image retention
OLED TV‘s are susceptible to image retention (burn-in) due to the
characteristics of the materials used. Image retention may occur if
images are displayed in the same location on the screen
repeatedly or over extended periods of time. This is not a
malfunction of the TV. Avoid displaying images that may cause
image retention.
The following are examples of images that may
cause image retention:
• Content with black bars either on the top and bottom and/or
the left and right sides of the screen. (for example, Letterboxed,
4:3 screen, Stan dard definiti on)
• Static images such as photos.
• Video games that might have static content in some part of the
een.
scr
• On-screen menus, programme guides, channel logos etc.
• Static content from applications.
• On-screen tickers, such as those used for news and headlines.
To redu ce the r i sk of i m age ret e ntio n :
• Sony recommends that you turn off the TV normally by pressing
the power button on the remote control or the TV.
• Fill the screen by changing [Wide mode] to eliminate the black
s. Select [Wide mode] other than [Normal].
bar
• Turn off the OSD (On Screen Display) by pressing the /
button, and turn off the menus from connected equipment. For
tails, refer to the instruction manuals for the connected
de
equipment.
• Avoid displaying static images with bright colours (including
clocks or logos on any portion of the screen.
white),
• Set the picture settings based on the ambient conditions. The
tandard Picture is recommended for home use and when
S
viewing content that often displays the station logos, etc.
The TV has following features to help reduce/prevent image
etention.
r
Pane l refresh
Panel refresh will automatically run to adjust the uniformity of the
TV screen after it has been in use for long periods of time. Panel
refresh can also be performed manually and should only be used
if image retention is very noticeable or you see the following
message: [Panel refresh did not finish…]
Caution:
• The Panel refresh function may affect the panel. As a reference,
perform the Panel refresh only once a year, do not perform it
more than once a year as it may affect the usable life of the
panel.
• Panel refresh takes about one hour to complete.
• A white line may be displayed on
refresh, this is not a malfunction of the TV.
• Panel refresh will only work when the room temperature is
tween 10 ºC and 40 ºC.
be
Pixel shift
Automatically moves the image on the screen to prevent image
retention.
Other feature
The screen brightness is automatically reduced when displaying
still images, clocks, bright colours or logos etc.
the screen during the Panel
GB
4
GB
ȩ
ȬȫȪ
Parts and Controls
Controls and Indicators
(Power) / + / –
When the TV is off,
Press to power on.
When the TV is on,
Press and hold to power off.
Press repeatedly to change the function,
then press + or – button to:
• Adjust the volume.
• Select the channel.
• Select the input source of TV.
Remote Control sensor*1 /
Light sensor*
The illumination LED lights up or blinks
according to the status of the TV.
For more information, refer to the Help
Guide.
1
/ Illumination LED
Built-in MIC*2*
Use the hands-free built-in microphone for
voice search. To enable the built-in MIC,
follow the on-screen instructions when you
press the button.
3
Built-in MIC LED
The built-in MIC LED lights up in amber
when the built-in MIC is enabled. The builtin MIC LED can be disabled.*
*1 Do not place anything near the sensor.
*2 The voice search requires an Internet connection.
The voice search with the built-in MIC is available
only on limited region/country/language.
Standby power consumption will increase because
the built-in MIC is always listening when the voice
search with the built-in MIC is enabled.
*3 For more information, see the Online Help Guide
(page 2).
3
GB
5
Using Remote Control
(Microphone)
Use voice search*. (e.g., Search
various content by voice.)
//// (Navigation D-Pad)
On screen menu navigation and
selection.
TV
Switch to a TV channel or input and
display the TV menu.
* The voice search requires an Internet connection.
Remote Control Parts Description
The remote control shape, location, availability and function of remote control buttons may vary
depending on your region/country/TV model.
(TV standby)
Turn on or turn off the TV (standby mode).
Number buttons
Use with the 0-9 buttons to select digital
channels.
(Text)
Display text information.
GB
6
Google Play
Access the “Google Play” online service.
NETFLIX (Only on limited region/
country/TV model)
Access the “NETFLIX” online service.
Colour buttons
Execute corresponding function at that time.
GB
Hint
GUIDE/
Display the digital programme guide.
APPS
Display a list of installed apps.
(Input select)
Display and select the input source, etc.
(Quick settings)
Display Quick Settings.
BACK
Return to the previous screen.
HOME
Display the TV Home Menu.
+/– (Volume)
Adjust the volume.
(Jump)
Jump back and forth between two channels
or inputs. The TV alternates between the
current channel or input and the last
channel or input that was selected.
(Mute)
Mute the sound. Press again to restore the
sound.
• The accessibility shortcut service can be turned
on or off by pressing and holding .
CH +/–//
In TV mode: Select the channel.
In Text mode: Select the next () or
previous () page.
AUDIO
Select the sound of multilingual source or
dual sound for the programme currently
being viewed (depend on programme
source).
(Subtitle setting)
Turn subtitles on or off (when the feature is
available).
HELP
Display the Help menu. Help Guide can be
accessed from here.
///
Operate media contents on the TV and
connected BRAVIA Sync-compatible device.
EXIT
Return to the previous screen or exit from
the menu. When an Interactive Application
service is available, press to exit from the
service.
/ (Info/Text reveal)
Display information.
GB
7
Connection Diagram
Ȫ
ȩ
ȫ
Ȭ
Ȭ
ȭ
ȭ
Digital still
camera/
Camcorder/
USB storage
media
VCR/Video game equipment/
DVD player/Camcorder
HDMI
Device
< 14 mm
Cable/
Antenna
Router
Audio
System
with
Optical
Audio
Input
Audio
System
with
eARC/
ARC/HDMI
Device
HDMI
Device
Digital still camera/Camcorder/
USB storage media
Headphone
HDMI Device
AV Receiver
For more information on connections, refer to the Help Guide by pressing HELP on the remote control.
GB
8
GB
Note
10 mm
3.5 mm
1234
1: L
2: Video
3: Ground
4: R
< 12 mm
< 21 mm
CENTER SPEAKER IN
• To use your TV speakers as the centre
speaker, connect the output of your AV
receiver to the CENTER SPEAKER IN on
your TV.
• Before connecting cables, disc
AC power cord (mains lead) of both TV
and AV receiver.
• Make sure the [Speakers] is
set to [Audio
system].
To prevent hiss when not connecting the
CENTER SPEAKER IN to an AV receiver,
disable [TV centre speaker mode]. For
details, refer to the Help Guide.
/ VIDEO IN
• For a composite connection, use an
Analogue Extension Cable (not supplied).
•
HDMI IN 1/2/3/4
• HDMI interface can transfer the digital
video and audio on a single cable.
•
onnect the
• To enjoy high quality 4K 50p/60p
contents, connect a Premium High Speed
HDMI cable and set the [HDMI signal
format] to [Enhanced format].
Do this setting individually for each
connected HDMI IN terminal. For details of
supported formats, refer to the
“Specifications“ in this manual (page 13-
14).
• HDMI IN 3 eARC/ARC (Enhanced Audio
Return Channel/Audio Return Channel)
Connect your audio system to the
HDMI IN 3 to route TV audio to your audio
system. An audio system that supports
HDMI eARC/ARC can send video to the TV,
and receive audio from the TV via the
same HDMI cable. If your audio system
does not support HDMI eARC/ARC, an
additional connection with DIGITAL AUDIO
OUT (OPTICAL) is necessary.
• Use the HDMI cable with Ethernet to
connect audio system with eARC.
(Headphone)
• Supports 3-pole stereo mini jack only.
• You cannot output sound from both the
headphone and the TV speakers at the
same time.
USB 1/2, USB 3
• Connecting a large USB device may
interfere with other connected devices
beside it.
• When connecting a large USB device,
connect to the USB 1 port.
• You cannot attach the side cover while the
cables are connected to side terminal.
• Be sure to store the side cover in a safe place for
fu
ture use.
GB
9
Installing the TV to the Wall
Using the optional Wall-Mount Bracket (SU-WL850 or SU-WL450)
To Customers:
For product protection and safety reasons, Sony strongly recommends that installation of your TV be
performed by Sony dealers or licensed contractors. Do not attempt to install it yourself.
To Sony Dealers and Contractors:
Provide full attention to safety during the installation, periodic maintenance and examination of this
product.
Wall-Mount Bracket Installation Information
This TV’s instruction manual only provides the steps to prepare the TV for Wall-Mount installation
before it is installed on the wall.
For instructions on Wall-Mount Bracket installation, see the Installation Information (Wall-Mount
Bracket) on the product page for your TV model.
http://www.sony-asia.com/support
Preparing for Wall-Mount Installation
Use the Wall-Mount Bracket SU-WL850 (not supplied) or SU-WL450 (not supplied) to install the TV to
the wall.
Make sure to attach the Table-Top Stand before installing the TV to the wall by referring to the Setup
Guide.
• Prepare the TV for the Wall-Mount Bracket before making cable connections.
• Follow the instruction guide provided with the Wall-Mount Bracket for your model. Sufficient
expertise is required in installing this TV, especially to determine the strength of the wall for
withstanding the TV’s weight.
• Be sure to entrust the attachment of this product to the wall to Sony dealers or licensed contractors
and pay adequate attention to safety during the installation. Sony is not liable for any damage or
injury caused by mishandling or improper installation.
• The screws for Wall-Mount Bracket are not supplied.
• Be sure to store the unused screws and Table-Top Stand in a safe place until you are ready to attach
the Table-Top Stand. Keep the screws away from small children.
10
GB
Loading...