Sony kd 32dx100u, kd 32ns100b, kd 32nx100u schematic
R
SERVICE MANUAL AE-6D CHASSIS
MODEL
COMMANDER DEST CHASSIS NO.
KD-32DX100U RM-933 UK SCC-Q84B-A
KD-32NS100B RM-935 FR SCC-Q85A-A
CORRECTION - 1
SUBJECT : CHANGES TO SECTION 3 SET-UP ADJUSTMENTS
File this correction with the service manual
Corrected Item
SECTION 3-2. CONVERGENCE ................................See page 22
MODEL
COMMANDER DEST CHASSIS NO.
KD-32NX100U RM-935 UK SCC-Q84A-A
HTIL Adjustment
Deflection Yoke
TLH pieces
HTIL correction can be performed by adding a TLH
correction assembly to the Deflection yoke.
TLH Adjustment
Deflection Yoke
TLH pieces
TLH correction can be performed by adding a TLH
correction assembly to the Deflection yoke.
Note : TLH piece should be used on one side only. Insert into
either the left or right side of the DY as necessary.
- 1 -
Screen Corner Convergence
Screen Corner Convergence
If you are unable to adjust the corner convergence properly,
this can be corrected with the use of permalloy magnets.
a
a-d: screen-corner
convergence defect
c
Install the permalloy assembly
for the area that needs correcting.
b
d
a
If you are unable to adjust the corner convergence properly,
this can be corrected with the use of permalloy magnets.
a
a-d: screen-corner
convergence defect
c
Install the permalloy assembly inside
DY against CRT funnel for the area
that needs correcting.
b
d
a
b
Permalloy Assy
X-4387-214-1
d
Convergence adjustment with permalloy
b
Permalloy Assy
X-4387-214-1
c
d
Convergence adjustment with permalloy
c
9-927-414-91
Sony Corporation
Sony UK
Service Promotions Dept
- 2 -
English
00IP7100-1
Printed in U.K.
© 2001.9
Loading...