Sony HT-S20R Users guide
Home Theatre System
What’s in the box
Bar speaker (1) Subwoofer (1) Surround speaker (2)
Connecting with a TV
3
Are there any HDMI IN jacks on your TV?
Startup Guide
Remote control (1) /
R03 (size AAA) battery (2)
WALL MOUNT TEMPLATE (1) Operating Instructions Startup Guide
To set up the remote control
AC power cord (mains lead) (1)
(the shape of the plug differs
depending on countries/
regions)
Optical digital cable (1)
(this document)
YES
Labeled “ARC” Not labeled “ARC”
Blu-ray Disc™
player, cable box
or satellite box,
etc.
Optical digital cable
(supplied)*
HDMI cable
(not supplied)
Blu-ray Disc™
player, cable box
or satellite box,
etc.
HDMI cable
(not supplied)
or
Stereo Mini
cable
(not
supplied)*
NO
Blu-ray Disc™
player, cable box or
satellite box, etc.
Optical digital
cable
(supplied)*
HT-S20R 5-010-729-11(1)
Deciding the installation position
1
Bar speaker
To mount the bar speaker and the surround speakers
on a wall
For details, refer to the Operating Instructions (separate
document).
4
: Video signal
: Audio signal
* If your TV does not support the ARC (Audio Return Channel) function, connect an optical digital cable (supplied) or a stereo mini cable (not supplied) to listen to the TV sound.
: Video signal
: Audio signal
: Audio signal
Turning on the system
Front panel display
Power ON
AC power cord
(mains lead) (supplied)
HELLO TV
2
Subwoofer
Note
• Disconnect the AC power cords (mains leads) of the TV and devices from the AC outlets (mains) in advance. The AC power cords must be reconnected in step 4.
• Place the subwoofer 5 cm or more away from a TV rack, walls, etc.
• Check the labels on the bottom of the each surround speaker to identify “SUR L” (left) and “SUR R” (right).
Connecting the speakers
Green
White
Red
Subwoofer
Note
• Connect the speaker cords to the matching color of the SPEAKERS jacks on the rear panel of the subwoofer.
Gray (from SUR R)
Blue (from SUR L)
SUR R
Bar speaker
SUR L
5
Turn on the TV.
Connect the AC power cord (mains lead) (supplied) to the subwoofer, then connect the AC power cord (mains lead) (supplied) to the AC outlet (mains).
The front panel display on the subwoofer lights up.
The remote control of the system does not work until [HELLO] in the front panel display on the subwoofer disappears.
Press (power) on the remote control of the system.
[TV] appears in the front panel display on the subwoofer.
Listening to a TV
/
INPUT
TV ANALOG
+/–
SW
+/–
Press INPUT to select the proper input source according to the cable connecting with a TV.
Input sources to be selected
• [TV]: Select this when using an HDMI cable or an optical digital cable to connect with a TV.
• [ANALOG]: Select this when using a stereo mini cable to connect with a TV.
Select the program you want using the TV remote control.
Press +/– to adjust the system volume and press SW +/– to adjust the subwoofer volume.
Note
• Depending on the order in which you turn on the TV and the system, the system may enter muting mode. In this case, turn on the TV first, then the system.
© 2020 Sony Corporation Printed in China
Loading...