Sony EBS-SP35 User Manual

Sony EBS-SP35

User Guide

Enseo, Inc.

401 International Parkway Suite 100 Richardson, Texas 75081

www.Enseo.com

Introduction

The EBS-SP35 is a professional tri-band tuner providing 8VSB, QAM and NTSC tuner function for connection to a line of Sony Professional LCD and Plasma displays. The EBS-SP35 includes support for Pro:Idiom™ decoding on lodging systems supporting this encryption technology.

This document outlines the set up and operation of the EBS-SP35. For questions or to check for updated information on this product, please check

www.sony.com/support for more information.

Table of Contents

Hardware / Setup

Shipped Components Setting up the EBS-SP35 / Connections Powering On

Menus / Configuration General Operations

- Remote Control Functionality

- Navigating Menus

Set Up Menu

- Channel Options

- Switch-On Options

- On-Screen Display Options

- Control Options

- Captioning Options

- V-Chip Options

- Service Options

User Menu

- Captioning

- Digital Captioning Mode

- Analog Captioning Mode

- Sleep Timer

- SAP

- Source

- Picture Format

- V-Chip Options

Operation

General Operation

- Lodging Mode

- Stand-Alone Mode

- Controlling the EBS-SP10 and Display with supplied Sony remote

Troubleshooting / FAQ Technical Specifications FCC Statement

Hardware Setup

Supplied Accessories

(Images not to scale)

EBS-SP35 Set-Top-Box

(Enseo HD1000)

12V DC Power Supply

Audio Adapter Cable Communication Cable HDMI Cable HDMI to DVI Adapter

Note:

For connecting the EBS-SP35 with the following Sony displays, the HDMI to DVI Adapter and Audio Adapter Cable are required:

FWD-40LX1 FWD-50PX2 FWD-42PX2 FWD-42PV1

For other models (LX2 and KLH) the HDMI Cable will supply both video and audio.

FWD-32LX1/R

Setting Up the EBS-SP35 / Making Connections

The EBS-SP35 is designed to function with Sony Professional LCD and Plasma displays which may differ in input types and connection configuration. For questions on connections and specifications on specific Sony displays, consult www.sony.com/support.

FWD-32LX2 / FWD-40LX2 Connections (HDMI Models)

PPV Provider

Control Box

1. Connect HDMI cable to EBS-SP35

2. Connect HDMI to Display Input 1

3. Connect the Communication cable to SP35

4. Connect 9-pin serial connector to Remote* input on display

5. Plug mini-jack cable to Control-S Out*

6. Connect Coax cable to ANTENNA input on box

7. Connect PPV provider RJ12 to PPV input on Box

8. Plug in 12V DC power adapter * RS232 and Control-S on option board (BKM-FW20) which is

standard on the LX2 models

Sony Displays with DVI-HDCP Digital Connections

PPV Provider

Control Box

Power Supply

1. Connect HDMI cable to EBS-SP35

2. Connect HDMI to DVI adapter to Display Input 1

3. Connect HDMI cable to HDMI to DVI adapter

4. Connect L/R audio to SP35

5. Connect mini-jack audio to the Input 1 audio

6. Connect the Communication cable to the input marked Display on the SP35

7. Connect the 9-pin serial connector on the Communication cable to the input labeled Remote on display.

8. Plug mini-jack cable to Control-S Out 9, Connect Coax cable to RF IN on SP35

10. Connect PPV provider RJ12 to PPV input on SP35

11. Plug in 12V DC power adapter

Note: Sony FWD-42PX2 and FWD-42PV1 have connections located on the bottom of the display and in different configuration than shown above.

Initial Power On

When the power is applied to the EBS-SP35 with the external AC adapter, the device will power on. The power status of the EBS-SP35 can be confirmed by viewing a lighted Green LED through the top cover of the set-top-box.. If this light is not seen, check the connections of the power supply.

Menus / Configuration

Stand Alone vs. Lodging Mode

The EBS-SP35 is designed to operate in a Pay-Per-View environment, connected to a lodging system that uses protocols and commands to control the display and tuner. The EBS-SP35 may also be able to operate in a Stand Alone mode to provide basic TV tuning for the Sony Display.

When the EBS-SP35 is connected to a compatible lodging system, the SP35 will automatically recognize the lodging system and respond to the PPV commander. In Lodging Mode, the control buttons and IR commands from the Sony remote will not control the

Supported Remote Controls

The EBS-SP35 is designed to function with the remote control that shipped with the Sony display. Because of differences in the display remotes, in which not all remotes have the same available buttons, some remotes may have limited functionality with the display remote. In such case, as standard Sony TV remote or universal remote using Sony IR commands can control the EBSSP35 in Stand-Alone Mode.

Navigating Menus The menus in the operation of the EBS-SP35 have been designed to use the Left, Right, Up,

Down buttons for most functions. To return to a previous menu, pressing the Left button

Set Up Menu

The EBS-SP35 set up process includes a sequence of numbers pressed on the Sony remote to access the set up menus. With the display and SP35 powered on press the following in sequence (note: when pressing buttons, press the buttons to be sure the system receives the code.

Setup Menu code: Up Right Left Mute

If a button is pressed in error, press the Down arrow to clear the code entries. In the lodging environment a different remote or function may be enabled to provide additional security.

Setup Menu

Channel Options

The EBS-SP35 supports analog and digital channels from cable or over-the-air sources. Note:

Air – To receive over-the-air channels, an antenna and additional equipment may be required Cable – Digital cable channels may not be accessible if conditional access or subscriptions are

required

Tuning Mode

Using arrow keys, select either Air or Cable

Edit Channel List

A submenu with functions to add, delete and manage channels

Clear Channel List

Used to delete the channel list programming

Auto Channel Install

Used to scan and install channels

Digital Channel Search

Used to search for digital channels available. Note, these channels will not be automatically entered into the channel lineup. Digital channels require entry management on the Edit Channel List menu.

Edit Channel List

This submenu allows for manual add, delete and management functions of channel s.

Channel Using remote, enter the numbers of the channel to manage

Include in List Yes to include / No to exclude

Type

Selection options include: Digital – Digital Channels Analog – Analog Channel A/V Input – Channel mapped AV inputs

Note: Depending on the selection type, the menu options will change for the Channel List menu

Analog Type Selection

The options for an analog channel include a customized Label for the channel, Addition of a thumbnail logo for the channel and selection of audio/video options for the channel.

+ 14 hidden pages