Sony DSCW180B, DSCW190R, DSC-W190, DSCW190B, DSC-W180 User Manual

...

Digital Still Camera

4-143-378-13(1)

Getting started

Shooting/viewing images

Instruction Manual

DSC-W180/W190

Before operating the unit, please read this manual thoroughly, and retain it for future reference.

Using shooting functions

Using viewing functions

Deleting images

Connecting to other devices

Changing camera settings

Owner’s Record

The model and serial numbers are located on the bottom. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product.

Model No. DSC-W180/W190

Serial No. ___________________________

WARNING

To reduce fire or shock hazard, do not expose the unit to rain or moisture.

If the shape of the plug does not fit the power outlet, use an attachment plug adaptor of the proper configuration for the power outlet.

CAUTION For Customers in the U.S.A. and

Canada

[ Battery pack

If the battery pack is mishandled, the battery pack can burst, cause a fire or even chemical burns. Observe the following cautions.

• Do not disassemble.

• Do not crush and do not expose the battery pack to any shock or force such as hammering, dropping or stepping on it.

• Do not short circuit and do not allow metal objects to come into contact with the battery terminals.

• Do not expose to high temperature above 60°C (140°F) such as in direct sunlight or in a car parked in the sun.

• Do not incinerate or dispose of in fire.

• Do not handle damaged or leaking lithium ion batteries.

• Be sure to charge the battery pack using a genuine Sony battery charger or a device that can charge the battery pack.

• Keep the battery pack out of the reach of small children.

• Keep the battery pack dry.

• Replace only with the same or equivalent type recommended by Sony.

• Dispose of used battery packs promptly as described in the instructions.

[ Battery charger

Even if the CHARGE lamp is not lit, the battery charger is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet (wall socket). If some trouble occurs while using the battery charger, immediately shut off the power by disconnecting the plug from the wall outlet (wall socket).

[ RECYCLING LITHIUM-ION

BATTERIES

Lithium-Ion batteries are recyclable.

You can help preserve our environment by returning your used rechargeable batteries to the collection and recycling location nearest you.

For more information regarding recycling of rechargeable batteries, call toll free 1-800-822-8837, or visit http://www.rbrc.org/

Caution: Do not handle damaged or leaking Lithium-Ion batteries.

[ Battery pack

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This Class B digital apparatus complies with Canadian ICES-003.

For Customers in the U.S.A.

UL is an internationally recognized safety organization.

The UL Mark on the product means it has been UL Listed.

If you have any questions about this product, you may call:

Sony Customer Information Center 1-800-222-SONY (7669)

The number below is for the FCC related matters only.

[ Regulatory Information

Declaration of Conformity

Trade Name: SONY Model No.: DSC-W180 Responsible Party: Sony Electronics Inc. Address: 16530 Via Esprillo,

Telephone No.: 858-942-2230

Declaration of Conformity

Trade Name: SONY Model No.: DSC-W190 Responsible Party: Sony Electronics Inc. Address: 16530 Via Esprillo,

Telephone No.: 858-942-2230

San Diego, CA 92127U.S.A.

[ CAUTION

You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.

[ Note:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment

and receiver.

– Connect the equipment into an outlet on a

circuit different from that to which the receiver is connected.

– Consult the dealer or an experienced radio/TV

technician for help.

The supplied interface cable must be used with the equipment in order to comply with the limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules.

For the State of California, USA only

Perchlorate Material-special handling may apply, See

www.dtsc.ca.gov/hazardouswaste/perchlorate

Perchlorate Material: Lithium battery contains perchlorate.

For Customers in Europe

[ Notice for the customers in the

countries applying EU Directives

The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 1080075 Japan. The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents.

This product has been tested and found compliant with the limits set out in the EMC Directive for using connection cables shorter than 3 meters (9.8 feet).

[ Attention

The electromagnetic fields at the specific frequencies may influence the picture and sound of this unit.

[ Notice

If static electricity or electromagnetism causes data transfer to discontinue midway (fail), restart the application or disconnect and connect the communication cable (USB, etc.) again.

[ Disposal of Old Electrical &

Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems)

This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.

Disposal of waste batteries (applicable in the European Union and other European countries with separate collection systems)

This symbol on the battery or on the packaging indicates that the battery provided with this product shall not be treated as household waste.

On certain batteries this symbol might be used in combination with a chemical symbol. The chemical symbols for mercury (Hg) or lead (Pb) are added if the battery contains more than

0.0005% mercury or 0.004% lead. By ensuring these batteries are disposed of

correctly, you will help prevent potentially negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of the battery. The recycling of the materials will help to conserve natural resources.

In case of products that for safety, performance or data integrity reasons require a permanent connection with an incorporated battery, this battery should be replaced by qualified service staff only. To ensure that the battery will be treated properly, hand over the product at end-oflife to the applicable collection point for the recycling of electrical and electronic equipment.

For all other batteries, please view the section on how to remove the battery from the product safely.

Hand the battery over to the applicable collection point for the recycling of waste batteries.

For more detailed information about recycling of this product or battery, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.

Notice for customers in the United Kingdom

A moulded plug complying with BS 1363 is fitted to this equipment for your safety and convenience.

Should the fuse in the plug supplied need to be replaced, a fuse of the same rating as the supplied one and approved by ASTA or BSI to BS 1362, (i.e., marked with an or mark) must be used.

If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station.

Notes on using the camera ...................................................................... 9

Getting started ................................................................... 10

Checking the accessories supplied........................................................ 10

Identifying parts....................................................................................... 11

Charging the battery pack ...................................................................... 12

Inserting the battery pack/a “Memory Stick Duo” media

(sold separately)...................................................................................... 14

Setting the clock...................................................................................... 16

Shooting/viewing images ...................................... 18

Shooting images...................................................................................... 18

Viewing images....................................................................................... 19

Using shooting functions ........................................................20

Detecting smiles and shooting automatically (Smile Shutter) ................. 20

Focusing on the face of the subject (Face Detection) ............................ 21

Shooting close-ups (Macro) .................................................................... 22

Using the self-timer ................................................................................. 22

Selecting a flash mode............................................................................ 23

Changing the screen display .................................................................. 23

Selecting the image size to match the usage ......................................... 24

Using the Shooting mode that matches the scene (Scene Selection).... 27

Shooting movies ...................................................................................... 28

Using viewing functions ........................................................... 30

Viewing an enlarged image (Playback zoom)......................................... 30

Searching for an image (Image Index) ................................................... 30

Viewing a series of still images (Slideshow)............................................ 31

Deleting images .............................................................................32

Deleting images ...................................................................................... 32

Deleting all images (Format) ................................................................... 33

Connecting to other devices ................................................. 34

Viewing images on a TV ..........................................................................34

Printing still images..................................................................................34

Using the camera with a computer.......................................................... 36

Changing camera settings ...................................................... 40

Changing the operation sounds .............................................................. 40

Using the MENU items.............................................................................41

Using the (Settings) items..................................................................44

Others .................................................................................................. 46

List of icons displayed on the screen ......................................................46

Learning more about the camera (“Cyber-shot Handbook”) ..................49

Troubleshooting .......................................................................................50

Precautions ..............................................................................................52

Specifications .......................................................................................... 53

Notes on using the camera

Internal memory and “Memory Stick Duo” media back up

Do not turn off the camera, remove the battery pack, or remove the “Memory Stick Duo” media while the access lamp is lit. Otherwise, the internal memory data or “Memory Stick Duo” media may be damaged. Be sure to make a backup copy to protect your data.

Notes on recording/playback

• Before you start recording, make a trial

recording to make sure that the camera is working correctly.

• The camera is neither dust-proof, nor splash-

proof, nor water-proof. Read “Precautions” (page 52) before operating the camera.

• Avoid exposing the camera to water. If water

enters inside the camera, a malfunction may occur. In some cases, the camera cannot be repaired.

• Do not aim the camera at the sun or other

bright light. It may cause the malfunction of the camera.

• Do not use the camera near a location that

generates strong radio waves or emits radiation. Otherwise, the camera may not properly record or play back images.

• Using the camera in sandy or dusty locations

may cause malfunctions.

• If moisture condensation occurs, remove it

before using the camera (page 52).

• Do not shake or strike the camera. It may

cause a malfunction and you may not be able to record images. Furthermore, the recording media may become unusable or image data may be damaged.

• Clean the flash surface before use. The heat

of flash emission may cause dirt on the flash surface to become discolored or to stick to the flash surface, resulting in insufficient light emission.

Notes on the LCD screen and lens

• The LCD screen is manufactured using

extremely high-precision technology so over

99.99% of the pixels are operational for effective use. However, some tiny black and/ or bright dots (white, red, blue or green) may appear on the LCD screen. These dots are a normal result of the manufacturing process, and do not affect the recording.

• When the battery level becomes low, the lens

might stop moving. Insert a charged battery pack and turn on the camera again.

On camera’s temperature

Your camera and battery may get warm due to continuous use, but it is not a malfunction.

On the overheat protection

Depending on the camera and battery temperature, the power may turn off automatically to protect the camera. A message will be displayed on the LCD screen before the power turns off.

On image data compatibility

• The camera conforms with DCF (Design rule

for Camera File system) universal standard established by JEITA (Japan Electronics and Information Technology Industries Association).

• Sony does not guarantee that the camera will

play back images recorded or edited with other equipment, or that other equipment will play back images recorded with the camera.

Warning on copyright

Television programs, films, videotapes, and other materials may be copyrighted. Unauthorized recording of such materials may be contrary to the provisions of the copyright laws.

No compensation for damaged content or recording failure

Sony cannot compensate for failure to record or loss or damage of recorded content due to a malfunction of the camera or recording media, etc.

Getting started

Checking the accessories supplied

• Battery charger BC-CSKA (1)

• Power cord (mains lead) (1)

Getting started

(not supplied in the USA and Canada)

• Rechargeable battery pack NP-BK1 (1)

• Dedicated USB cable (1)

• Dedicated A/V cable (1)

• Wrist strap (1)

• CD-ROM (1)

– Cyber-shot application software – “Cyber-shot Handbook” – “Cyber-shot Step-up Guide”

• Instruction Manual (this manual) (1)

Using the wrist strap

The wrist strap is preset at the factory.

Attach the strap and place your hand through the loop to prevent the camera from damage by being dropped.

Hook

Identifying parts

Bottom

A Shutter button B Flash C Microphone D ON/OFF (Power) button E ON/OFF (Power) lamp F Self-timer lamp G Lens H LCD screen I MENU button J For shooting: W/T (Zoom) button

For viewing: (Playback zoom) button/ (Index) button

K Mode switch L DC IN jack

• Connecting the camera to AC Adaptor

AC-LS5K (sold separately) will not charge the battery. Use a battery charger for charging the battery.

M (USB)·A/V OUT terminal

(side)

N Jack cover O Hook for wrist strap P For shooting: (Smile) button

For viewing: (Delete) button

Q Control button

Menu on: v/V/b/B/z Menu off: DISP/ / /

R Speaker S Tripod receptacle

• Use a tripod with a screw less than

5.5 mm (7/32 inch) long. Otherwise, you cannot firmly secure the camera, and damage to the camera may occur.

T Battery/“Memory Stick Duo” media

cover

U Battery insertion slot V Battery eject lever W “Memory Stick Duo” media slot X Access lamp

Getting started

Charging the battery pack

Insert the battery pack into

the battery charger.

• You can charge the battery even when

it is partially charged.

Getting started

Battery pack

Connect the battery

charger to the wall outlet (wall socket).

• If you continue charging the

battery pack for about one more hour after the CHARGE lamp turns off, the charge will last slightly longer (full charge).

CHARGE lamp Lit: Charging Off: Charging finished (normal charge)

For customers in the USA and Canada

Plug

CHARGE lamp

For customers in countries/regions other than the USA and Canada

Power cord (mains lead)

CHARGE lamp

When charging is finished, disconnect the battery

charger.

Charging time

Full charge time Normal charge time

Approx. 300 min. Approx. 240 min.

Notes

• The table above shows the time required to charge a fully depleted battery pack at a temperature of

25°C (77°F). Charging may take longer depending on conditions of use and circumstances.

• Connect the battery charger to the nearest wall outlet (wall socket).

• When charging is finished, disconnect the power cord (mains lead) from the wall outlet (wall

socket), and remove the battery pack from the battery charger.

• Be sure to use the battery pack or the battery charger of the genuine Sony brand.

Battery life and number of images you can record/view

Battery life (min.) No. of Images

Shooting still images Approx. 145 Approx. 290

Viewing still images Approx. 240 Approx. 4800

The measurement method is based on the CIPA standard. (CIPA: Camera & Imaging Products Association)

Note

• The battery life and the number of still images may vary depending on the camera settings.

zUsing the camera abroad

You can use the camera, the battery charger (supplied), and the AC-LS5K AC Adaptor (sold separately) in any country or region where the power supply is within 100 V to 240 V AC, 50 Hz/60 Hz.

Do not use an electronic transformer (travel converter). This may cause a malfunction.

Getting started

Inserting the battery pack/a “Memory Stick Duo” media (sold separately)

Open the cover.

Getting started

Insert the “Memory Stick

Duo” media (sold separately).

With the terminal side facing the lens, insert the “Memory Stick Duo” media until it clicks into place.

Insert the battery pack.

Insert the battery while pressing the lever in the direction of the arrow.

Close the cover.

“Memory Stick” media that you can use

“Memory Stick Duo” media

You can also use a “Memory Stick PRO Duo” media or “Memory Stick PRO-HG Duo” media with the camera.

For details on the number of images/time that can be recorded, see pages 26, 29. Other types of “Memory Stick” media or memory card are not compatible with the camera.

“Memory Stick” media

You cannot use a “Memory Stick” media with the camera.

When there is no “Memory Stick Duo” media inserted

Images are stored in the camera’s internal memory (approximately 12 MB). To copy images from the internal memory to a “Memory Stick Duo” media, insert the “Memory Stick Duo” media in the camera, then select MENU t (Settings) t [“Memory Stick” Tool] t [Copy].

To remove the battery pack

Battery eject lever

Getting started

To remove the

“Memory

Stick Duo” media

Access lamp

Make sure that the access lamp is not lit, then push the “Memory Stick Duo” media in once.

Note

• Never remove the “Memory Stick Duo”

media/battery pack when the access lamp is lit. This may cause damage to data in the “Memory Stick Duo” media/internal memory.

Slide the battery eject lever. Be sure not to drop the battery pack.

Checking the remaining battery charge

A remaining charge indicator appears on the upper left of the LCD screen.

High

Notes

• It takes about one minute until the correct

remaining charge indicator appears.

• The remaining charge indicator may not be

correct under certain circumstances.

• Battery capacity decreases over time and

through repeated use. When the operating time per charge decreases markedly, the battery pack needs to be replaced. Purchase a new battery pack.

• If the camera is running on and you do not

operate the camera for about three minutes, the camera turns off automatically (Auto power-off function).

Low

Setting the clock

Press the ON/OFF (Power)

button.

The camera is turned on.

• It may take time for the power to turn on

and allow operation.

Getting started

Select the date and time

display format with v/V on the control button, then press z.

ON/OFF (Power) button

Control button

Set the numeric value with v/V/b/B, then press z.

• Midnight is indicated as 12:00 AM, and noon as 12:00 PM.

Select [OK], then press z.

Note

• The camera does not have a feature for superimposing dates on images. By using “PMB” in the

CD-ROM (supplied), you can print or save images with the date.

Setting the date and time again

Press the MENU button, then select (Settings) t [Clock Settings] (page 45).

Getting started

+ 39 hidden pages

Sony DSCW180B, DSCW190R, DSC-W190, DSCW190B, DSC-W180 User Manual

Table of contents

Getting started

Checking the accessories supplied

Identifying parts

Charging the battery pack

Inserting the battery pack/a “Memory Stick Duo” media (sold separately)

Setting the clock