Sony DR-XB22IP BROCHURE
DR-XB22IP
Bringing out the best of your beats with enhanced bass performance, the XB-Series
earbuds deliver crisp sounds and deep feeling bass. An in-line remote provides track
and volume controls for iPod® or iPhone®1 and the built-in microphone lets you take
calls on the go. The result is outstanding audio quality and full iPod/iPhone/iPad®
compatibility.
Powerful Bass
Specially designed, powerful drivers housed in a tightly sealed acoustic design result in ultimate bass
reproduction.
Made for iPod®/iPhone®/iPad
Full integration for iPod, iPhone and iPad.1 The in-line remote gives you volume and track controls (Play, Stop,
Next/Prior) for iPod, iPhone or iPad, and the built-in microphone makes it easy to take calls through it all.
VoiceOver support
The simple press of a button activates
VoiceOver mode where the iPod
playlist (on enabled devices).
Snug Fit
Angled in-the-ear style combined with 4 hybrid silicone earbud sizes translates to a proper t and long-term
wearing comfort.
Flat cord
The durable, 1.2 m at cord has a smooth nish and reduces tangles, so you can get caught up in your music, not
your cord.
®
®
states the name of the currently playing song or
Extra Bass Earbuds for iPhone
®
Specications
Audio
Driver Unit
Frequency Response 5 - 23,000 Hz
Impedance 16 ohms at 1 kHz
Sensitivity (db) 103 dB/mW
Volume Control +/- Button
Closed, Dynamic
9 mm, dome type (CCAW) PET Diaphragm
Convenience
Remote Control Functions Volume, FF, RW, Play, Pause, Mic
General
Design In-Ear, Portable-music/movie/games
Headband None
Magnet Neodymium
Plug
Four-conductor gold-plated stereo mini plug for iPod with remote
function
Type of Use Portable
Hardware
Cord 47 1/4 in (1.2 m), Flat Y-Type
Headphone Type In-Ear
Microphone Electret Condenser
Inputs and Outputs
CompatibilityThe terms: iPod, iPhone and iPad are collectively described as “iPod”
except in special cases.
iPhone 4
iPhone 3GS
iPod touch® 4th generation
iPod touch 3rd generation
Digital Audio Input(s)
iPod touch 2nd generation
iPod nano® 6th generation
iPod nano 5th generation
iPod nano 4th generation
iPod classic® 120GB 160GB (2009)
iPod shue® 4th generation
iPod shue 3rd generation
®
iPad
Microphone Input Omni Directional, In-Line Microphone
Power
Power Handling Capacity 100 mW (IEC)
Weights and Measurements
Cord Length (Approx.) 47-1/4 in. (1.2 m) at cord, Y-type
Weight (Approx.) .14 oz. (4 g) Without Cord
Accessories
Earbuds - S (2), M (2), L (2)
Supplied Accessories
Operating Instructions (1)
Warranty Card (1)
1. Works with iPad®, iPhone 4, iPhone 3GS, iPod classic® 120GB & 160 GB (2009), iPod nano® 4th, 5th & 6th
generation, iPod shue® 3rd & 4th generation, and iPod touch® 2nd, 3rd & 4th generation.
© 2011 Sony Electronics Inc. All rights reserved. Reproduction in whole or in part without written
permission is prohibited. Sony is a trademark of Sony. iPod, iPod classic, iPod shue, iPod nano, iPod
touch, iPad and iPhone are trademarks of Apple Inc. All other trademarks are trademarks of their
respective owners. Features and specications are subject to change without notice. Non-metric weights
and measures are approximate and may vary. /Updated: September 7, 2011
Loading...