DR-V150IP
Built for your ears – and your iPod®1. The DR-V150iP Studio Monitor Series headset
incorporates high-end materials, advanced engineering, and built-in control for iPod®1
and iPhone®. The in-line remote control and microphone let you navigate your music
library with ease or take calls without taking your iPhone® out of your pocket.
In-line remote control and microphone
Use the in-line remote control and microphone to navigate your iPod® library1 or talk on your iPhone® without
ever taking your player out of your pocket.
Dierences in details
30mm drivers deliver deeper bass, lower distortion and wider dynamic range. Bass response extends down to
18Hz. Built to handle power, these headphones hold up to high-output levels.
Left or right – you choose
Reversible earcups enable single-sided monitoring exibility
Better sound through better design
The ergonomic, supra-aural design rests lightly on the ears, positioning the driver the correct distance from the
ear canal and creating a controlled environment for better sound.
Ample sound, minimum noise
Ferrite magnets provide high energy and compact size while producing (98 dB/mW sensitivity), and oxygen-free
copper cord produces maximum conductivity and minimal noise.
Stay comfortable as long as you listen
A wide, molded headband distributes the headphone's weight over a wide area, reducing pressure and
improving comfort in even the longest listening sessions.
Specications
Audio
Driver Unit 30 mm, dome type (CCAW)
Frequency Response 16 - 22,000 Hz
Impedance 24 ohms at 1 kHz
Sensitivity (db) 98 dB/mW
Volume Control Yes
Convenience
Remote Control Functions Volume, FF, RW, Play, Pause, Mic
General
Magnet Neodymium
Plug Four-conductor gold-plated stereo mini plug for iPod and iPhone with remote function
Power Handling Capacity 500mW (IEC)
Hardware
Cord 47 1/4 in. (1.2 m) Litz cord, Y-Type
Microphone Yes
Inputs and Outputs
CompatibilityThe terms: iPod, iPhone and iPad are collectively described as “iPod” except in special cases.
iPod touch® 4th generation
iPod touch 3rd generation
iPod touch 2nd generation
iPod nano® 6th generation
Digital Audio Input(s)
iPod nano 5th generation
iPod nano 4th generation
iPod classic® 120GB 160GB (2009)
iPod shue® 4th generation
iPod shue 3rd generation
iPhone 4
iPhone 3GS
iPad®
Weights and Measurements
Weight (Approx.) Approximately 4.25 oz. (120 g) without cord
Accessories
Supplied Accessories
Warranty Card (1)
Operating Instructions (1)
1. Ability to use all generations of iPod products may vary as not all products are compatible.
© 2010 Sony Electronics Inc. All rights reserved. Reproduction in whole or in part without written
permission is prohibited. Sony is a trademark of Sony. iPod and iPhone are trademarks of Apple, Inc.
Features and specications are subject to change without notice. Non-metric weights and measures are
approximate and may vary. /Updated: August 11, 2011