4-114-319-11(1)
Startup Guide
The Startup Guide explains how to connect, setup and use your Wireless Link.
DMX-WL1
© 2008 Sony Corporation
2
Welcome to the World of Wireless Link
Entertainment made simple
Transmitter and Receiver provide a wireless link between your sources and your compatible
BRAVIA HDTV
Real time transmission
For a true gaming experience
Expandability
Support up to 5 source devices (4 HDMI and 1 component)
Simple Operation
Control your BRAVIA HDTV and all connected sources using the supplied remote
Clean and Cable-free
Easy to mount receiver remains concealed behind your compatible BRAVIA HDTV
This product is compatible with Control for HDMI enabled BRAVIA TVs released from 2007.
Please check with your retailer or visit http://www.sonystyle.com/dmxwl1
to view model compatibility.
IN
OUT
IN
DC IN 9V
Connecting
1
Attaching the Receiver Unit to the
Rear of the TV
Power off your TV before beginning setup.
the Receiver unit
1 Attach the supplied TV Mounting bracket to
the bottom left side of the TV rear panel.
Plastic Fastener
Guide Pin
• Do not push on the head of the Plastic Fastener until you
have inserted the fastener into the hole of the TV.
3 Slide the receiver unit onto the bracket.
4 Connect the receiver unit and TV with the
supplied HDMI cable.
2 Align the slider on the bottom of the receiver
unit with the groove of the TV Mounting
bracket.
5 Connect the AC power adapter with AC
power cord between the receiver unit and the
wall outlet.
to wall outlet
AC power adapter
• See the Reference Guide for information for alternate
attachment methods.
AC power cord
3
4
Choosing
RE
C
CONNEC
T
SETU
P
TO
P
MEN
U
MEN
U
F
1
F
2
BD/DV
D
REC PAUS
E
MUTIN
G
JUM
P
REC STO
P
AV POWE
R
TV POWE
R
DISPLA
Y
POWE
R
COMPO
-
NEN
T
IN 5
T
V
WID
E
PICTUR
E
C
C
MEN
U
FREEZ
E
1
4
7
2
5
8
0
3
6
9
EN
T
VO
L
C
H
WIRELESS LIN
K
IN
1
IN 2
IN 3
IN 4
HDMI
RE
C
CONNEC
T
SETU
P
TO
P
MEN
U
MEN
U
F
1
F
2
BD/DV
D
REC PAUS
E
MUTIN
G
JUM
P
REC STO
P
AV POWE
R
TV POWE
R
DISPLA
Y
POWE
R
COMPO
-
NEN
T
IN 5
T
V
WID
E
PICTUR
E
C
C
MEN
U
FREEZ
E
1
4
7
2
5
8
0
3
6
9
EN
T
VO
L
C
H
WIRELESS LIN
K
IN
1
IN 2
IN 3
IN 4
HDMI
RE
C
CONNEC
T
SETU
P
TO
P
MEN
U
MEN
U
F
1
F
2
BD/DV
D
REC PAUS
E
MUTIN
G
JUM
P
REC STO
P
AV POWE
R
TV POWE
R
DISPLA
Y
POWE
R
COMPO
-
NEN
T
IN 5
T
V
WID
E
PICTUR
E
C
C
MEN
U
FREEZ
E
1
4
7
2
5
8
0
3
6
9
EN
T
VO
L
C
H
WIRELESS LIN
K
IN
1
IN 2
IN 3
IN 4
HDMI
2
A
B
your setup type
Controlling the equipment using the supplied remote control
Other Equipment
You can connect up
to 5 sources to the
transmitter.
TV
Transmitter unit
Supplied remote control
Controlling the equipment using the supplied remote control and sending the
audio output to your Home Theater System
Cable Box
OPTICAL Cable
C
TV
Transmitter unit
Other Equipment
Cable Box
Supplied remote control
Controlling the equipment using your Home
Theater System
Other Equipment
Supplied remote control
TV
Transmitter unit
Cable Box
You can operate equipment
connected to the transmitter unit
with the supplied remote control.
Some equipment may not be
supported.
You can operate equipment
connected to the transmitter unit
with the supplied remote control.
Use your Home Theater System
remote control to control the
Volume.
Home Theater System
Home Theater System remote
control
Home Theater System
Home Theater System remote
control
Use your Home Theater System
remote control to select the sources
attached to your Home Theater
System.
• You cannot operate any equipment connected
to the transmitter unit with the supplied remote
control.
5
6
DC IN 9V
R
AUDIO
L
PRPBY
5 COMPONENT IN
IR BLASTER
IN
4 3 2 1
(1080i/720p/480p/480i)
R-AUDIO-L
DIGITAL AUDIO OUT
SERVICE
(OPTICAL)
R
AUDIO
L
PRPBY
5 COMPONENT IN
(1080i/720p/480p/480i)
1
DC IN 9V
R
AUDIO
L
PRPBY
5 COMPONENT IN
IR BLASTER
IN
4 3 2 1
(1080i/720p/480p/480i)
R-AUDIO-L
DIGITAL AUDIO OUT
SERVICE
(OPTICAL)
R
AUDIO
L
PRPBY
5 COMPONENT IN
(1080i/720p/480p/480i)
1
(OPTICAL)
DC IN 9V
R
AUDIO
L
PRPBY
5 COMPONENT IN
IR BLASTER
IN
4 3 2 1
(1080i/720p/480p/480i)
R-AUDIO-L
DIGITAL AUDIO OUT
SERVICE
(OPTICAL)
1
Connecting
3
the Transmitter unit
A
Transmitter unit
B
Transmitter unit
IR Blaster
HDMI
Component
IR Blaster
C
Transmitter unit
HDMI
Component
OPTICAL AUDIO
HDMI
HDMI
HDMI
HDMI
Component
Home Theater System
Place the IR Blaster
DC IN 9V
near the IR receiver
of the equipment.
Place the IR Blaster
near the IR receiver
of the equipment.
VCR/DVD/Blu-ray Disc/
Satellite receiver/
Cable box
Connecting to the
AC power outlet
When you finish connecting the equipment
to the transmitter unit, connect the AC
power adapter to the wall outlet.
Transmitter unit
to wall outlet
AC power cord
VCR/DVD/Blu-ray Disc/
Satellite receiver/
Cable box
Home Theater System
DVD
Blu-ray Disc
Cable box
VCR
AC power adapter
• Set the output resolution of the equipment to
480i, 480p, 720p or 1080i.
If you currently use equipment connected
directly to your TV with 1080p resolution,
make sure to change the equipment’s
resolution to 1080i or less before connecting
it to the transmitter unit.
You should connect the equipment directly
to the TV to change the resolution.
7
8
POWER
Turning
POWER
POWER
4
the TV and the Transmitter unit on
1 Turn the power of the TV on.
Set Control for HDMI in the Settings menu
of the TV On.
Then select the HDMI input that the receiver
unit is connected to.
TV
• If POWER LED of the receiver unit does not light up,
confirm Control for HDMI setting of the TV is On.
• The power of the receiver unit turns on or off in
conjunction with TV, if Control for HDMI setting of the
TV is On and the unit is connected to the TV by HDMI
cable.
Control for HDMI is enabled on your TV, the
• When
power of the receiver unit will follow the power state of
the TV. When the TV is turned on or off, the receiver unit
will also turn on or off. To manually control the power of
the receiver unit using the receiver’s POWER button, you
must turn off the TV’s Control for HDMI.
Control for HDMI of the TV is Off, you must turn
• If
the power of the receiver unit on or off by pressing the
POWER button on the unit.
• The supplied remote control cannot be used to turn on or
off the receiver unit separately from the TV.
2 Confirm the POWER LED automatically lights
up in green on the receiver unit.
3 Press POWER on the transmitter unit.
POWER button
When the power of the transmitter unit is
turned on, the POWER LED will light up in
green, along with the white lamp on the front.
POWER LED
White lamp
4 Verify the Wireless LINK LEVEL.
LINK LEVEL
The LINK LEVEL LEDs located on the front
of the transmitter unit allows you to verify
the Wireless LINK LEVEL between the
transmitter and the receiver units.
LINK LEVEL LED
When the units are establishing a link, the
LINK LEVEL LED blinks.
After the wireless connection is established,
the LED stops blinking.
To ensure good picture quality, make
sure that all three LEDs light up in green,
indicating a good link.
Optimal environment for placement
of the units
Follow the suggestions below to create an
optimal environment for your Wireless Link.
Proper placement of the receiver and transmitter
units will ensure a strong Wireless LINK LEVEL
for superior performance.
• Use one system per room, placing the
transmitter and receiver units for each system
in the same room.
• If you use a 5 GHz WLAN or cordless phone,
place those in a different room.
• Do not place either unit on a metallic rack.
• Place the transmitter unit as high up as
possible.
• Maximum operating distance is approximately
65 feet (20 m), depending on the environment.
• Be sure to keep at least 1 foot (30 cm)
minimum distance between the transmitter and
receiver units.
Recommended placement of the receiver
and transmitter units is within 65 feet (20 m)
of each other. If you experience problems
with the LINK LEVEL, removing obstructions
from the path between the units may improve
the LINK LEVEL.
If the Wireless LINK LEVEL is less than three
or the picture is noisy or the sound quality
is diminished, press CONNECT to switch to
another wireless channel.
If you experience problems finding a suitable
LINK LEVEL, see the Troubleshooting
section in the Reference Guide for more
information.
9
10
Running
I ni ti al Se tu p
S te p 1: Se le ct a la ng ua ge
H ig hl ig ht a c h oi ce b y pr es s i ng
I NP UT S EL EC T o n yo ur
t ra ns mi tt er . Pr es s CO NN E C T to
c on ti nu e.
E ng li sh
E sp añ ol
Fr an ç a is
INPUT SELECT
CONNECT
5
Initial Setup instructions will appear on the
screen when the receiver and transmitter
units are turned on for the first time.
Initial Setup
1 Press INPUT SELECT on the transmitter
unit to highlight your language choice. Then,
press CONNECT on the transmitter unit to
continue the setup.
INPUT SELECT button
CONNECT button
• The supplied remote control cannot be used at this
stage.
2 Insert batteries into the remote control.
Push to open
3 On your remote control, press and hold the
I ni ti al Se tu p
S te p2 : A ct iv at e yo ur re mo te
c o nt ro l
O n yo ur r em ot e, p re ss a nd
h ol d IN 1 . Wh il e ho ld i n g IN 1 ,
p re ss R ET UR N. H ol d bo th
fo r at l ea st 2 s ec on ds .
Ke ep yo ur r em ot e c o nt ro l wi th in
1 0 fe et o f th e t ra ns mi tt er .
AV POWER TV POWER
DISPLAY
POWER
COMPO
-
NEN
T
IN 5
IN 1 IN 2 IN 3 IN 4
TV
HDMI
WID
E
PICTUR
E
CC
MEN
U
FREEZ
E
IN 1
I ni ti al Se tu p
A ct iv at io n co mp l et e
To s et u p I R B la st er , pr es s
S ET UP ; ot he rw is e p re ss
R ET UR N to e xi t.
IN 1 button. While holding IN 1, press the
RETURN button. Hold both for at least 2
seconds.
IN 1 button
4 Initial Setup is complete.
To use the supplied remote control to operate
equipment connected to the transmitter unit,
proceed to the next page.
• To display Initial Setup again, press CONNECT and
INPUT SELECT on the transmitter unit simultaneously.
RETURN button
11
12
Configuring
S et up
I R B la st er
L an gu ag e
S of tw ar e Ve r s io n 1 . 00 .0 0
HDMI 1
HDMI 2
HDMI 3
HDMI 4
Component
S et up /I R B la s te r
HDMI 1
HDMI 2
HDMI 3
S et up /I R Bl as t er /H DM I 1
C at eg or y
M ak er
C od e
Te st ( Po we r On /O ff )
S ave an d Ex it
REC
CONNECT
SETUP
TOP MENU
MENU
F1 F2
BD/DVD
REC PAUSE
MUTING JUMP
REC STOP
AV POWER TV POWER
DISPLAY
POWER
COMPO
-
NENT
IN 5
IN 1 IN 2 IN 3 IN 4
TV
HDMI
WID
E
PICTURE
CC
MEN
U
FREEZE
1
4
7
2
5
8
0
3
6
9
ENT
VO
L
C
H
WIRELESS LIN
K
SETUP
6
the remote control
Configure the IR Blaster to control your
connected equipment using the supplied
remote control.
You can control connected equipment
with your remote by using the IR Blaster
(supplied).
If you chose setup type C, you cannot use the
IR Blaster to control connected equipment.
Exit the Setup menu by pressing SETUP on
the remote control to skip these steps.
1 Press SETUP on the remote control to
display the Setup menu.
2 Press to highlight IR Blaster, and press
. The following screen appears.
Open the lid of the
remote control
2-8
3 Press to highlight an input to configure,
and press .
1
4 Press to highlight Category (equipment
S et up /I R Bl as t er /H DM I 1
C at eg or y
M ak er
C od e
Te st ( Po we r
S ave an d Ex
C ab le B ox
S at el li te
V CR
DV D
B D
R ec ei ve r
S et up /I R Bl as t er /H DM I 1
C at eg or y
M ak er
C od e
Te st ( Po we r
S ave an d Ex
S on y
L G
Pa na s on ic
P hi li ps
P io ne er
S am su ng
S et up /I R Bl as t er /H DM I 1
C at eg or y
M ak er
C od e
Te st ( Po we r On /O ff )
S ave an d Ex it
B D 1
B D 2
B D 3
S et up /I R Bl as t er /H DM I 1
C at eg or y
M ak er
C od e
Te st ( Po we r On /O ff )
S ave an d Ex it
B D
S on y
B D 1
S et up /I R Bl as t er /H DM I 1
C at eg or y
M ak er
C od e
Te st ( Po we r On /O ff )
S ave an d Ex it
B D
S on y
B D 1
type), and press .
Select an equipment type from the list, and
press .
5
Press to highlight Maker, and press .
Select a manufacturer from the list, and press
.
7 Press to highlight Test (Power On/Off)
and press .
Test to see if the selected equipment power
turns on and off.
You may need to test more than one code to
find the right code for your equipment.
• If the equipment’s supplied remote control has both
POWER ON and POWER OFF buttons, using Test
(Power On/Off) might not work to test the IR code.
Select Save and Exit then check if any other remote
buttons will operate your equipment.
8
When you have found the right code, press to
highlight Save and Exit, and press .
Save the setting and exit from the Setup
menu.
6 Press to highlight Code, and press .
Select a code from the list, and press .
See page 15 on Reference Guide if your
code is not on the list.
• When more than one code is available for your
manufacturer, start checking from the top of the list for
the code that operates your equipment.
• Do not connect two of the same equipment from
the same manufacturer (Eg. two Sony Blu-ray disc
players), you will not be able to control each equipment
individually.
• To erase the code, select
highlight “----” and press in step 4.
Category, then press to
13
REC
CONNECT
SETUP
TOP MENU
MENU
F1 F2
BD/DVD
REC PAUSE
MUTING JUMP
REC STOP
AV POWER TV POWER
DISPLAY
POWER
COMPO
-
NEN
T
IN 5
IN 1 IN 2 IN 3 IN 4
TV
HDMI
WID
E
PICTUR
E
CC
MEN
U
FREEZ
E
1
4
7
2
5
8
0
3
6
9
ENT
VO
L
C
H
WIRELESS LIN
K
TV
WID
E
PICTUR
E
FREEZ
E
MUTING
VO
L
TV POWER
MEN
U
1
4
7
2
5
8
0
3
6
9
ENT
C
H
CONNECT
SETUP
14
Using
7
the supplied remote control
Operating your TV
The following buttons are for operating your TV.
Press the TV button before using them.
Button Description
TV POWER
TV
INPUT
PICTURE
WIDE
FREEZE
0-9, ENT
CH +/-
HOME/MENU
VOL+/-
MUTING
Press the SETUP button to display the Setup
menu if you need to change Language or IR
Blaster settings.
If the Wireless LINK LEVEL is less than three or
the picture is noisy, press CONNECT to switch to
another wireless channel.
Press to turn the TV on and off.
You must first press the TV function
button to operate the TV.
Press to select the input of the TV.
Press to change the picture mode.
Press to change the wide mode.
Press once to display a frozen image
with the current program in a window.
Press again to return to the current
program.
Press 0-9 to select a channel; the
channel changes after two seconds,
press ENT to change channels
immediately.
Press to scan through channels.
Press to display the TV Home menu.
Press to adjust the volume.
Press to mute the sound. Press again or
press VOL+ to restore the sound.
• You can use the SETUP or CONNECT buttons when any input is
selected.
REC
CONNECT
SETUP
TOP MENU
MENU
F1 F2
BD/DVD
REC PAUSE
MUTING JUMP
REC STOP
AV POWER TV POWER
DISPLAY
POWER
COMPO
-
NEN
T
IN 5
IN 1 IN 2 IN 3 IN 4
TV
HDMI
WID
E
PICTUR
E
CC
MEN
U
FREEZ
E
1
4
7
2
5
8
0
3
6
9
ENT
VO
L
C
H
WIRELESS LIN
K
COMPO
-
NEN
T
IN 5
IN 1 IN 2 IN 3 IN 4
HDMI
AV POWER
POWER
MEN
U
Operating equipment connected
to the transmitter unit
• You must connect the IR Blaster and complete setup for all connected
equipment before you can operate them.
1 Press POWER to turn the transmitter unit on.
2 Press IN 1-4 HDMI or IN 5 COMPONENT to
select the desired input source.
3 Press AV POWER to turn on the equipment
connected to the selected input source.
Button Description
/
/
/
HOME/MENU
The connected
equipment can be
operated without
aiming the remote
control directly at
the equipment.
Goes to the beginning of the previous/
next title/chapter/scene/track.
Replays the scene/briefly fast forwards
the scene.
Fast reverses/fast forwards the disc
when pressed during playback.
Plays a disc at normal speed.
Pauses the playback.
Stops the playback.
Displays menus of selected external
equipment.
Moves the on-screen cursor of selected
external equipment. Press to select/
confirm an item.
15
For Your Convenience
Please contact Sony Customer Support directly if you:
• Have questions on the use of your module after reading the Startup Guide or Reference Guide
• Experience difficulty operating your module
For United States
http://www.sony.com/tvsupport
or to speak with a support representative: 1-866-918-2485
For Canada
http://www.sony.ca/support
or to speak with a support representative: 1-877-899-SONY (7669)
Sony will work to resolve your questions more quickly than your retailer or place of purchase.
Please Do Not Return the Product to the Store
On-line Registration
United States
http://productregistration.sony.com
Canada
http://www.SonyStyle.ca/registration
Printed in Japan
Loading...