![](/html/4c/4cd5/4cd5430510bdfa2d7d9a7bd6c6a4223a702fc4e92a00029111b7c89bacf2333f/bg1.png)
Description
The SP3T is a high power antenna switch MMIC for
use in TDMA800/1900/AMPS800 triple mode handsets.
One Antenna can be routed to one of AMPS, PCS Tx
and PCS Rx. This IC is designed using the Sony's
JFET process for low insertion loss.
Features
• Low second harmonics < –31dBm at 29dBm @2.8V
• Low insertion loss: 0.3dB (Ant. – AMPS)
• Small package size: TSSOP-10pin (3.2mm × 2.8mm)
Applications
TDMA800/1900/AMPS800 triple mode handsets.
Structure
GaAs J-FET MMIC
Absolute Maximum Ratings (Ta = 25°C)
• Control voltage | VCTL |5V
VCTL (H) – VCTL (L) 5 V
• Operating temperature Topr –35 to +85 °C
• Storage temperature Tstg –60 to +150 °C
Notes on Handling
GaAs MMICs are ESD sensitive devices. Special handling precautions are required.
Block Diagram
CXG1101TN
SP3T Antenna Switch for TDMA800/1900/AMPS800 Triple Mode Application
– 1 –
E00443B25-PS
Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by
any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the
operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits.
10 pin TSSOP (Plastic)
Pin Configuration
Ant Rx (TDMA1900 (Rx))
6 5
Tx (TDMA1900 (Tx))
CTL1
ON
3
AMPS
1
CTL2
ON
CTL3
ON
Ant
Rx (TDMA1900 (Rx))
5
6
GND
GND
4
7
CTL1
Tx (TDMA1900 (Tx))
3
8
CTL2
GND
2
9
CTL3
AMPS
1
10
![](/html/4c/4cd5/4cd5430510bdfa2d7d9a7bd6c6a4223a702fc4e92a00029111b7c89bacf2333f/bg2.png)
CTL1
RCTL (1kΩ)
Cbypass (100pF)
6
10
9
8
7
5
1
2
3
4
CRF (100pF) CRF (100pF)
Ant Rx (TDMA1900 (Rx))
CRF (100pF)
Tx (TDMA1900 (Tx))
CRF (100pF)
AMPS
CTL2
RCTL (1kΩ)
Cbypass (100pF)
CTL3
RCTL (1kΩ)
Cbypass (100pF)
When using this IC, the following external parts should be used:
RCTL: This resistor is used to improve ESD performance. 1kΩ is recommended.
CRF: This capacitor is used for RF de-coupling and must be used for all applications. 100pF is recommended.
Cbypass: This capacitor is used for DC line filtering. 100pF is recommended.
Recommended Circuit