![](/html/9c/9c84/9c84da485a8438154afe458f954bceda7bca193c909cc1fb49544a62c8cba8f7/bg1.png)
e
TRINITRON® CHARACTER DISPLAY
CPD-1201/9000
OPERATING INSTRUCTIONS Page 2
Before operating the unit, please read this manual
thoroughly and retain it for future reference.
MODE D’EMPLOI page
Lire attentivement ce mode d’emploi avant de mettre
l’appareil en fonction. Le conserver aux fins de consulta
tion ultérieure.
8
OWNER’S RECORD
The model and serial npinbers are located at the rear.
Record these numbers in the sf^ces provided below.
Refer to these numbers whenever you call upon your
Sony dealer regarding this product.
Model No*_
© 1984 by Sony Corporation
Serial No_
![](/html/9c/9c84/9c84da485a8438154afe458f954bceda7bca193c909cc1fb49544a62c8cba8f7/bg2.png)
English
FEATURES
The CPD-1201/9000 is a high resolution character
dispiay designed for use with microcomputers,
character generators or videotex units having either
analog or digital RGB output.
WARNING
To prevent fire or shock hazard, do not ex
pose the unit to rain or moisture.
Dangerousiy high voltages are present in
side the unit.
Do not open the cabinet. Refer servicing
to qualified personnel only.
INFORMATION
This equipment generates and uses radio frequency
energy and if not installed and used properly, that is, in
strict accordance with the manufacturer’s instructions,
may cause interference to radio and television recep
tion. It has been type tested and found to comply with
the limits for a Class B computing device in accordance
with the specifications in Subpart J of Part 15 of FCC
Rules, which are designed to provide reasonable protec
tion against such interference in a residential installa
tion. Hpwever, there is no guarantee that interference
will not occur in a particular installation. If this equip
ment does cause interference to radio or television
reception, which can be -determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
Reorient the receiving antenna
Relocate the equipment with respect to the receiver
Move the equipment away from the receiver
Plug the equipment into a different outlet so that
equipment and receiver are on different branch
circuits.
If necessary, the user should consult the dealer or an ex
perienced radio/television technician for additional sug
gestions. The user may find the following booklet
prepared by the Federal Communications Commission
helpful :
“How to Identify and Resolve Radio-TV Interference
Problems’^ This booklet is available from the U.S.
Government Printing Office, Washington, DC 20402,
Stock No. 004-000-00345-4.
A shielded interface cable such as the SMF-series
recommended on page 5 must be used with this equip
ment.
•Super Fine Pitch Trinitron character display with a
dark (CPD-1201: anti-glaring dark) screen.
•An RGB terminal which allows equipment with either
analog or digital RGB output to be connected.
TABLE OF CONTENTS
Precautions
Features..................................................................... 2
Location and function of controls..........................
Use of a display stand
Connections............................................................ 4
Connection with the Sony SMC-70 or SMC-70G
Connection with other microcomputers
Specifications
Timing chart
.......................................................
.........................................
microcomputer
...........................................................
............................................................
.............................................
2
4
.........
3
4
5
6
6
PRECAUTIONS
On safety
•Operate the unit only on 120 V ac, 60 Hz.
•Should any liquid or solid object fall into the cabinet,
unplug the unit and have it checked by quallfed person
nel before operating It any further.
•Unplug the unit from the wall outlet if It is not to be us
ed for several days.
•To disconnect the ac power cord, pull it out by the
plug. Never pull the cord Itself.
On installation
•Allow adequate air circulation to prevent internal heat
build-up.
Do not place the unit on surfaces (rugs, blankets, etc.) or
near materials (curtains, draperies) that may block the
ventilation holes.
•Do not install the unit In a location near heat sources
such as radiators or air ducts, or in a place subject to
direct sunlight, excessive dust, mechanical vibration or
shock.
On cleaning'
To keep the unit looking brand-new, periodically clean it
with a soft cloth. Stubborn stains may be removed with a
cloth lightly dampened with a mild detergent solution.
Never use strong solvents such as thinner or benzine, or
abrasive cleansers since these will damage the cabinet.
As a safety precaution, unplug the unit before cleaning
it.
On repacking
Do not throw away the carton and packing materials.
They make an ideal container in which to transport the
unit. When shipping the unit to another location, repack
it as illustrated on the carton.
If you have any questions about this unit, contact your
Sony service facility.